A zinc(II) metal–organic framework with a novel topology formed from 4,4′,4′′‐nitrilotribenzoate and 4,4′‐bipyridine ligands

A metal–organic framework with a novel topology, poly[sesqui(μ₂‐4,4′‐bipyridine)bis(dimethylformamide)bis(μ₄‐4,4′,4′′‐nitrilotribenzoato)trizinc(II)], [Zn₃(C₂₁H₁₂NO₆)₂(C₁₀H₈N₂)_1.5(C₃H₇NO)₂]_n, was obtained by the solvothermal method using 4,4′,4′′‐nitrilotribenzoic acid and 4,4′‐bipyridine (bipy). The structure, determined by single‐crystal X‐ray diffraction analysis, possesses three kinds of crystallographically independent Zn^II cations, as well as binuclear Zn₂(COO)₄(bipy)₂ paddle‐wheel clusters, and can be reduced to a novel topology of a (3,3,6)‐connected 3‐nodal net, with the Schläfli symbol {5.6²}₄{5².6}₄{5⁸.8⁷} according to the topological analysis.     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.     

Photophysical Properties and Photochemical Behaviour of Ruthenium(II) complexes containing the 2,2′-bipyridine and 4,4′-diphenyl-2,2′-bipyridine ligands

The temperature dependence of the emission lifetime of the series of complexes Ru(bpy)_n(4,4′-dpb) (bpy = 2,2′bipyridine, 4,4′-dpb = 4,4′-diphenyl-2,2′-bipyridine) has been studied in propionitrile/butyronitrile (4:5 v/v) solutions in the range 90–293 K. The obtained photophysical parameters show that the energy separation between the metal-to-ligand charge tranfer (³MLCT) emitting level and the photoreactive metal-centered (³MC) level changes across the series (ΔE = 3960, 4100, 4300, and 4700 cm^?1 for Ru(bpy)), Ru(bpy)2(4,4′-dpb)²⁺, Ru(bpy)(4,4′-dpb), and Ru(4,4′-dpb), respectively, where ΔE is the energy separation between the minimum of the ³MLCT potential curve and ³MLCT – ³MC crossing point. Comparison between spectral and electrochemical data indicated that the changes in ΔE are due to stabilization of the MLCT levels in complexes containing 4,4′-dpb with respect to Ru(bpy)²⁺₃. The photochemical data for the same complexes (as I^? salts) have been obtained in CH₂Cl₂ in the presence of 0.01M Cl^? upon irradiation at 462 nm. The complexes containing 4,4′-dpb are more photostable than Ru(bpy). Comparison between the data for thermal population of the ³MC photoreactive state and those for photochemistry indicated that the overall photochemical process is governed by (i) a thermal redistribution between the emitting and photoreactive excited states, and (ii) mechanistic factors, likely related to the size of the detaching ligand.     

Crystallographic report: Crystal structure of a one‐dimensional zinc(II) coordination polymer containing 4,4′‐biphenyldicarboxylate hemihydrate

A one‐dimensional zinc(II) coordination polymer has been constructed from zinc(II), 4,4′‐biphenyldicarboxylate and pyridine in which each zinc(II) atom is coordinated by two pyridine ligands and two monodentate 4,4′‐biphenyldicarboxylate ligands that define a distorted tetrahedral geometry. Copyright © 2003 John Wiley & Sons, Ltd.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

A square‐planar tellurium(II) complex with Te,Te′‐chelating ligands

While exploring the chemistry of tellurium‐containing dichalcogenidoimidodiphosphinate ligands, the first all‐tellurium member of a series of related square‐planar E^II(E′)₄ complexes (E and E′ are group 16 elements), namely bis(P,P,P′,P′‐tetraphenylditelluridoimidodiphosphinato‐κ²Te,Te′)tellurium(II) (systematic name: 2,2,4,4,8,8,10,10‐octaphenyl‐1λ³,5,6λ⁴,7λ³,11‐pentatellura‐3,9‐diaza‐2λ⁵,4λ⁵,8λ⁵,10λ⁵‐tetraphosphaspiro[5.5]undeca‐1,3,7,9‐tetraene), C₄₈H₄₀N₂P₄Te₅, was obtained unexpectedly. The formally Te^II centre is situated on a crystallographic inversion centre and is Te,Te′‐chelated to two anionic [(TePPh₂)₂N]⁻ ligands in an anti conformation. The central Te^II(Te)₄ unit is approximately square planar [Te—Te—Te = 93.51 (3) and 86.49 (3)°], with Te—Te bond lengths of 2.9806 (6) and 2.9978 (9) Å.     

A novel cadmium(II) coordination polymer with biphenyl‐3,3′,4,4′‐tetra­carboxylic acid and 4,4′‐bipyridine

A novel cadmium(II) coordination polymer, poly[[[bis­(4,4′‐bipyridine)cadmium(II)]‐μ₃‐4,4′‐dicarboxy­biphenyl‐3,3′‐di­carboxyl­ato] 0.35‐hydrate], {[Cd(C₁₆H₈O₈)(C₁₀H₈N₂)₂]·0.35H₂O}_n, was obtained by reaction of Cd(CH₃COO)₂·3H₂O, 4,4′‐bipyridine (4,4′‐bpy) and biphenyl‐3,3′,4,4′‐tetra­car­boxylic acid (H₄L) under hydro­thermal conditions. Each Cd^II atom lies at the centre of a distorted octa­hedron, coordinated by four O atoms from three H₂L²⁻ ligands and N atoms from two monodentate 4,4′‐bpy ligands. Each H₂L²⁻ ligand coordinates to three Cd^II atoms through two carboxyl­ate groups, one acting as a bridging bidentate ligand and the other in a chelating bidentate fashion. Two Cd atoms, two H₂L²⁻ anions and four 4,4′‐bpy ligands form a ring dimer node, which links into an extended broad zonal one‐dimensional chain along the c axis.     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

Dichloro(4,4′‐dinonyl‐2,2′‐bipyridine‐κ2N,N′)platinum(II)

The title compound, [PtCl₂(C₂₈H₄₄N₂)], is a new square‐planar Pt^II complex con­taining a bi­pyridine moiety with two long alkyl‐chain substituents. The complex forms a segregated packing structure made up of the alkyl‐chain layers and paired coordination sites.     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)zinc(II)](4,4′‐bipyridine)

The centrosymmetric structure of {Zn[S₂CN(CH₂Ph)₂]₂}₂(4,4′‐bipy) features chelating dithiocarbamate ligands so that a trigonal bipyramidal NS₄ coordination geometry for zinc results. Copyright © 2003 John Wiley & Sons, Ltd.     

Crystallographic report: (4,4′‐Bipyridine)bis[bis(N,N‐diethyldithiocarbamato)zinc(II)]

The structure of [Zn(S₂CNEt₂)₂]₂(4,4′‐bipy) shows two independent dimeric molecules, one located about a centre of inversion, the other lying on a two fold axis containing the zinc atoms. Bidentate coordination by the dithiocarbamate ligands and a distorted square pyramidal geometry are found for two of zinc atoms whereas for the third zinc atom, the geometry is intermediate between square pyramidal and trigonal bipyramidal, a result that underscores the flexibility of coordination in these systems. Copyright © 2003 John Wiley & Sons, Ltd.     

Bis(4,4′‐bipyridinium) hexa­cyano­platinate(IV) bis­(4,4′‐bipyridine)

In the title compound, (C₁₀H₉N₂)₂[Pt(CN)₆]·2C₁₀H₈N₂ or [(Hbpy)⁺]₂[Pt(CN)₆]²⁻·2bpy, where bpy is 4,4′‐bipyridine, the Hbpy⁺ cations and bpy mol­ecules form a hydrogen‐bonded two‐dimensional cationic approximately square grid parallel to the (110) plane. The [Pt(CN)₆]²⁻ dianions reside in the cavities within this grid, with the nitrile N atoms forming weak hydrogen bonds with the CH groups in the cationic lattice.     

Zinc(II) and cadmium(II) chloride complexes with 4,4′‐bi‐1,2,4‐triazole

New coordination compounds with the 4,4′‐bi‐1,2,4‐triazole ligand (btr), namely tetraaqua‐2κ⁴O‐di‐μ₂‐4,4′‐bi‐1,2,4‐triazole‐1:2κ²N¹:N^1′;2:3κ²N¹:N^1′‐hexachlorido‐1κ³Cl,3κ³Cl‐trizinc(II), [Zn₃Cl₆(C₄H₄N₆)₂(H₂O)₄], (I), and poly[cadmium(II)‐μ₂‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N²‐di‐μ₂‐chlorido], [CdCl₂(C₄H₄N₆)]_n, (II), reveal an unprecedented molecular zwitterionic structure for (I) and a polymeric two‐dimensional layer structure for (II). Differences between these products, which involve the formation of either charge‐separated chlorometallate/aquametal fragments or complementary organic and inorganic bridges, are attributable to the hardness–softness characters of the metal cations. In (I), two N¹,N^1′‐bidentate btr molecules connect one [Zn(H₂O)₄]²⁺ cation and two [ZnCl₃]⁻ anions into a linear trizinc motif (the Zn atom of the cation occupies a centre of inversion in an N₂O₄ coordination octahedron, whereas the Zn atom of the anion possesses a distorted tetrahedral Cl₃N environment). In (II), the distorted vertex‐sharing CdCl₄N₂ octahedra are linked into binuclear [Cd₂(μ₂‐Cl)(μ₂‐btr)₂]³⁺ fragments by unprecedented N¹:N²‐bidentate btr double bridges and bridging chloride ligands, while the additional chloride anions are also bridging, providing further propagation of the fragments into a two‐dimensional network [Cd—Cl = 2.5869 (2)–2.6248 (7) Å].     

4,4′‐Thio­dipyridinium tetra­chloro­copper(II)

The title compound, (C₁₀H₁₀N₂S)[CuCl₄], was obtained by the reaction of cupric chloride with pyridine‐4‐thiol in a mixture of aceto­nitrile and tetra­hydro­furan, suggesting that the desulfurization and coupling reactions of pyridine‐4‐thiol occurred in the presence of the Cu²⁺ ion. X‐ray diffraction analysis reveals the presence of one 4,4′‐thio­dipyridinium cation, H₂bps²⁺, and one [CuCl₄]²⁻ anion. The cations interact with the anions via N—H⋯Cl hydrogen‐bonding interactions to form a closed `chair' conformation.     

A threefold interpenetrated two‐dimensional zinc(II) supramolecular architecture based on 3‐nitrobenzoic acid and 4,4′‐bipyridine

With regard to crystal engineering, building block or modular assembly methodologies have shown great success in the design and construction of metal–organic coordination polymers. The critical factor for the construction of coordination polymers is the rational choice of the organic building blocks and the metal centre. The reaction of Zn(OAc)₂·2H₂O (OAc is acetate) with 3‐nitrobenzoic acid (HNBA) and 4,4′‐bipyridine (4,4′‐bipy) under hydrothermal conditions produced a two‐dimensional zinc(II) supramolecular architecture, catena‐poly[[bis(3‐nitrobenzoato‐κ²O,O′)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₇H₄NO₄)₂(C₁₀H₈N₂)]_n or [Zn(NBA)₂(4,4′‐bipy)]_n, which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction analysis. The Zn^II ions are connected by the 4,4′‐bipy ligands to form a one‐dimensional zigzag chain and the chains are decorated with anionic NBA ligands which interact further through aromatic π–π stacking interactions, expanding the structure into a threefold interpenetrated two‐dimensional supramolecular architecture. The solid‐state fluorescence analysis indicates a slight blue shift compared with pure 4,4′‐bipyridine and HNBA.     

Dichloro(2,2′‐diamino‐4,4′‐bi‐1,3‐thiazole‐N3,N3′)copper(II)

The title complex, [CuCl₂(C₆H₆N₄S₂)], has a flattened tetrahedral coordination. The Cu^II atom is located on a twofold rotation axis and is coordinated by two N atoms from a chelating 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and by two Cl atoms. Intramolecular hydrogen bonding exists between the amino groups of the 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and the Cl atoms. The intermolecular separation of 3.425 (1) Å between parallel bi­thia­zole rings suggests there is a π–π interaction between them.     

(2,2′‐Biquinoline‐κ2N,N′)dichloropalladium(II), ‐copper(II) and ‐zinc(II)

In the three title complexes, namely (2,2′‐biquinoline‐κ²N,N′)dichloro­palladium(II), [PdCl₂(C₁₈H₁₂N₂)], (I), and the corresponding copper(II), [CuCl₂(C₁₈H₁₂N₂)], (II), and zinc(II) complexes, [ZnCl₂(C₁₈H₁₂N₂)], (III), each metal atom is four‐coordinate and bonded by two N atoms of a 2,2′‐biquinoline molecule and two Cl atoms. The Pd^II atom has a distorted cis‐square‐planar coordination geometry, whereas the Cu^II and Zn^II atoms both have a distorted tetra­hedral geometry. The dihedral angles between the N—M—N and Cl—M—Cl planes are 14.53 (13), 65.42 (15) and 85.19 (9)° for (I), (II) and (III), respectively. The structure of (II) has twofold imposed symmetry.     

A two‐dimensional copper(II) coordination polymer based on 2,4′‐oxybis(benzoate) and 4,4′‐bipyridine

The reaction of Cu(NO₃)₂·3H₂O with 2,4′‐oxybis(benzoic acid) and 4,4′‐bipyridine under hydrothermal conditions produced a new mixed‐ligand two‐dimensional copper(II) coordination polymer, namely poly[[(μ‐4,4′‐bipyridine‐κ²N ,N ′)[μ‐2,4′‐oxybis(benzoato)‐κ⁴O ²,O ^2′:O ⁴,O ^4′]copper(II)] monohydrate], {[Cu(C₁₄H₈O₅)(C₁₀H₈N₂)]·H₂O}_n , which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the Cu^II ions are connected to form a two‐dimensional wave‐like network through 4,4′‐bipyridine and 2,4′‐oxybis(benzoate) ligands. The two‐dimensional layers are expanded into a three‐dimensional supramolecular structure through intermolecular O—H…O and C—H…O hydrogen bonds. Furthermore, magnetic susceptibility measurements indicate that the complex shows weak antiferromagnetic interactions between adjacent Cu^II ions.     

Copper(II) and cadmium(II) isothiocyanate coordination polymers with 4,4′‐bi‐1,2,4‐triazole

The coordination polymers catena‐poly[[[(4,4′‐bi‐1,2,4‐triazole‐κN¹)bis(thiocyanato‐κN)copper(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′] dihydrate], {[Cu(NCS)₂(C₄H₄N₆)₂]·2H₂O}_n, (I), and poly[tetrakis(μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′)bis(μ‐thiocyanato‐κ²N:S)tetrakis(thiocyanato‐κN)tricadmium(II)], [Cd₃(NCS)₆(C₄H₄N₆)₄]_n, (II), exhibit chain and two‐dimensional layer structures, respectively. The differentiation of the Lewis acidic nature of Cu^II and Cd^II has an influence on the coordination modes of the triazole and thiocyanate ligands, leading to topologically different polymeric motifs. In (I), copper ions are linked by bitriazole N:N′‐bridges into zigzag chains and the tetragonal–pyramidal CuN₅ environment is composed of two thiocyanate N atoms and three triazole N atoms [basal Cu—N = 1.9530 (18)–2.0390 (14) Å and apical Cu—N = 2.2637 (15) Å]. The structure of (II) contains two types of crystallographically unique Cd^II atoms. One type lies on an inversion center in a distorted CdN₆ octahedral environment, with bitriazole ligands in the equatorial plane and terminal isothiocyanate N atoms in the axial positions. The other type lies on a general position and forms centrosymmetric binuclear [Cd₂(μ‐NCS‐κ²N:S)₂(NCS)₂] units (tetragonal–pyramidal CdN₄S coordination). N:N′‐Bridging bitriazole ligands link the Cd centers into a flat (4,4)‐network.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000