Visible photoluminescence from Ge+-implanted SiO2 films thermally grown on crystalline Si

+ -implanted SiO₂ films is studied as a function of different fabricating conditions (implantation dose, annealing temperature and time). The SiO₂ films containing Ge nanocrystals exhibit two photoluminescence (PL) bands peaked at 600 nm and 780 nm. There are two excitation bands in the PL excitation (PLE) spectra. With variation in Ge nanocrystal size, the PL and PLE peak energies show no appreciable shift. The PL and PLE spectral analyses suggest that during the PL process, electron–hole pairs are generated by the E(l) and E(2) direct transitions inside Ge nanocrystals, which then radiatively recombine via luminescent centers in the matrix or at the interface between the nanocrystal/matrix. Received: 27 January 1998/Accepted: 18 March 1998     

In situ synthesis of mesoporous CdS nanoparticles in ternary cubic phase lyotropic liquid crystal

An in situ technique for the synthesis of CdS nanoparticles in a ternary lyotropic cubic phase liquid crystal has been carried out. The extremely viscous cubic phase liquid-crystal system consists of poly(oxyethylene)₁₀ nonyl phenol ether as non-ionic surfactant, octane as oil phase and an aqueous phase containing reactant ions (Cd²⁺ and S^2-). Thioacetamide (TAA) has been utilized as a source for slow release of sulfur in the in situ synthesis of CdS. Rheological results show that CdS nanoparticle growth did not disrupt the structure of the cubic phase liquid-crystal system. This indicates that homogenous synthesis of CdS in the liquid crystal had been achieved. The final products were characterized using X-ray photoelectron spectroscopy, thermal gravimetric analysis, transmission electron microscopy and UV-visible spectroscopy. It was found that the CdS nanoparticles formed have a mesoporous structure with a size dependent on the TAA decomposition aging time. Received: 29 March 2002 / Accepted: 4 September 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +603-8921/3257, E-mail: shahidan@pkrisc.cc.ukm.my     

Synthesis of LECBD grown cluster assembled SeO2 thin films

Cluster assembled selenium oxide (SeO₂) thin films, as a function of oxygen flow pressure (OFP) have been synthesized by a low energy cluster beam deposition (LECBD) technique. The OFP dependent surface morphology leading to well separated nanoclusters (size ranging from 50 to 200 nm) and fractal features are confirmed from transmission electron microscopic (TEM) measurements. A diffusion limited aggregation (DLA) mediated fractal growth with dimension as 1.71 ± 0.01 has been observed for high OFP (60 mbar). Structural analysis by glancing angle X-ray diffraction (GXRD) and selected area diffraction (SAD) studies identify the presence of tetragonal phase SeO₂ in the deposit. Micro-Raman studies indicate the shifts in bending and stretching vibrational phonon modes in cluster assembled SeO₂ as compared to their bulk counter part due to the phonon confinement effect.     

Imaging as-grown single-walled carbon nanotubes originated from isolated catalytic nanoparticles

Discrete catalytic nanoparticles with diameters in the range of 1–3 nm are obtained by placing controllable numbers of metal atoms into the cores of apoferritin. With nanoparticles placed on transmission electron microscope (TEM) grids coated with ultra-thin alumina membranes, isolated single-walled carbon nanotubes are grown by chemical vapor deposition and directly examined by TEM. The characterizations, carried out at single-tube and single-particle level, obtain clear evidence that the diameters of the nanotubes are determined by the diameters of catalytic nanoparticles. For the first time, both ends of an as-grown single-walled nanotube are imaged by TEM, leading to a microscopic picture of the nanotube-growth mechanism. Received: 19 September 2001 / Accepted: 3 December 2001 / Published online: 4 March 2002     

High-quality GaN nanowires synthesized using a CVD approach

High-quality GaN nanowires were synthesized on a large-area Si substrate by direct reaction of gallium with ammonia using InCl₃ as a catalyst. The morphology and microstructure of the resulting products were characterized using a field-emission scanning electron microscope (SEM), a high-resolution transmission electron microscope, and X-ray diffraction (XRD). XRD and electron diffraction revealed that the nanowires are of a hexagonal GaN phase with the wurtzite structure. The SEM study showed that the nanowires are straight and have a smooth morphology with lengths up to 500 μm. The present results reveal that InCl₃ is an optimal catalyst in GaN nanowire production. Received: 2 April 2002 / Accepted: 12 April 2002 / Published online: 19 July 2002     

Growth and evolution of epitaxial erbium disilicide nanowires on Si (001)

Sub-monolayer amounts of Er deposited onto Si (001)react with the substrate to form epitaxial nanowires of crystalline ErSi₂. The growth of uniaxial structures occurs because the different crystal structures of ErSi₂ and Si have a good lattice match along one Si<110> crystallographic axis but a significant mismatch along the perpendicular Si<110> axis. The nucleation, growth, and subsequent evolution of ErSi₂ nanowires were investigated as functions of erbium coverage on the Si (001) surface, annealing time, and annealing temperature. Low annealing temperatures (620 °C) and times (5 min) produced ErSi₂ nanowires with widths of a few nanometers, heights less than one nanometer, and lengths of several hundred nanometers. For longer annealing times at low temperature, the surface roughened without significant ripening of the wires. Annealing at intermediate temperatures (∼700 °C) caused stacking faults to form along the long axis of the nanowires and their lengths to ripen. At high temperature (800 °C), the wires broke apart into short segments with stacking faults. Received: 30 January 2002 / Accepted: 31 January 2002 / Published online: 3 May 2002     

Experimental and theoretical studies of instabilities of metal nanoparticles: a new kind of quasimelting

In this work we report experimental and theoretical studies of structural instabilities of gold nanoparticles supported on a carbon substrate using high-resolution transmission microscopy and molecular dynamics simulations. It is shown that particles undergo structural fluctuations in which a particle exhibits a change in orientation whilst maintaining the overall structure. These fluctuations are of a different kind than the ones reported in previous work, in which transitions between different structures or the appearance, movement or vanishing of twin boundaries are observed. Computer calculations were performed using a model that included both the particle and the substrate. It is found that during the fluctuations there is a collective displacement of the atoms at the interface between the gold and the carbon substrate that results in a larger contact area. Calculations of particle stability that include the interaction with the carbon substrate show that different orientations of the particle have similar energies. As a result, during the fluctuations the particle becomes trapped between different orientations of the same structure. This kind of phenomenon can be considered as a new kind of quasimelting. Received: 26 September 2000 / Accepted: 27 January 2001 / Published online: 23 May 2001     

Deposition of mass-selected cluster ions using a pulsed arc cluster-ion source

A PACIS (pulsed arc cluster-ion source) developed for high average cluster-ion currents is presented. The performance of the PACIS at different operational modes is described, and the suitability for cluster-deposition experiments is discussed in comparison with other cluster-ion sources. Maximum currents of mass-selected cluster ions of 3–6 nA of small Si_n ^- (n=4–10) clusters and 0.3–0.5 nA of large Al_n ^+/- (n=20–70) clusters are achieved. The mass-selected cluster ions are soft-landed on a substrate at residual kinetic energies lower than 1 eV/atom, and the samples are characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. First results on the soft landing of “magic” Si₄ ^- clusters on graphite are presented. Received: 30 May 2001 / Accepted: 14 June 2001 / Published online: 2 October 2001     

Synthesis and photoluminescence of aligned straight silica nanowires on Si substrate

Aligned straight silica nanowires (NWs) have been synthesized on Si wafer by thermal evaporation of mixed powders of zinc carbonate hydroxide and graphite at 1100 °C and condensation on Si substrate without using any catalyst. The straight silica NWs have diameters ranging from 50 to 100 nm, and lengths of several micrometers, with cone-shaped tips at their ends. High deposition temperature and relatively high SiO_x vapor concentration near the growth substrate would be beneficial to the formation of the aligned straight silica NWs. Different morphologies of silica nanostructures have also been obtained by varying the deposition temperature and the vapor concentration of the SiO_x molecules. Room temperature photoluminescence measurements on the oriented silica NWs show that two green emission bands at 510 and 560 nm, respectively, revealing that the aligned straight silica NWs might have potential applications in the future optoelectronic devices.     

Atomistic processes and the strain distribution in the early stages of thin film growth

Structural relaxations in small Co islands on the Cu(001) surface are investigated performing atomistic calculations. We demonstrate that the strain relief at the metal interface in the early stages of heteroepitaxy is more complicated than suggested by simple considerations based on the small mismatch between the Co and Cu bulk metals. We found that the strain distribution in the surface region near the islands varies strongly on an atomic scale. The effect of strain on the shape of the Co islands is revealed. Diffusion on the top of strained islands and edge diffusion are considered. Received: 10 April 2000 / Accepted: 15 May 2000 / Published online: 7 March 2001     

Bi nanocrystals embedded in an amorphous Ge matrix grown by pulsed laser deposition

Received: 1 September 1997/Accepted 8 September 1997     

Photoluminescence properties of size-selected Si nanocluster films prepared by laser ablation

Size-dispersed Si nanocluster films have been synthesized by a method of crossing an Ar gas beam perpendicularly to a silicon cluster beam that is produced by a laser ablation technique. Flight directions of the nanoclusters are changed due to Ar gas collisions, and smaller nanoclusters are deflected further from the axis of the primary cluster beam. The size-dispersed nanocluster films exhibit strong red photoluminescence (PL) after exposure to the air. The PL peak energy changes between 1.42 and 1.72 eV depending on the sample position. The average diameter of the oxidized nanoclusters characterized by transmission electron microscopy is 10 nm at the position of the primary cluster beam axis and becomes smaller as deviated from the axis. The relation between the PL peak energy and the size of the oxidized Si nanoclusters is discussed. Received: 4 May 2000 / Accepted: 9 May 2000 / Published online: 13 July 2000     

Causes of different catalytic activities of metals in formation of single-wall carbon nanotubes

When single-wall carbon nanotubes (SWNTs) were formed by pulsed Nd:YAG laser ablation or arc discharge, the yield depended on the metal catalyst: NiCo> Ni∼NiFe≫Co∼Fe>Pd∼Pt. It appears that an effective catalyst for SWNT growth must satisfy three conditions: it must be a good graphitization catalyst, have low solubility in carbon, and have a stable crystallographic orientation on graphite. NiCo, Ni, and NiFe satisfy these three conditions. The poor catalytic activities of Co, Fe, Pd, and Pt for SWNT formation would be explained by the ineffectiveness of Pt and Pd as graphitization catalysts, crystallographic orientation instability of Co crystals on graphite, and high solubility of Fe in graphite. Received: 29 October 2001 / Accepted: 7 November 2001 / Published online: 23 January 2002     

A Mechanism for the Self-Organization of Colloidal Gold Nanoparticles

We report a two-stage mechanism of formation of the two-dimensional surperlattices in colloidal gold nanoparticles. The first stage is the formation and growth of holes. When the film is thinner than the “pancake“ thickness and because the solvent volatility holes nucleate and grow, the dry solid surface is exposed. The second stage corresponds to the reorganization of the colloids in the impacted areas between several holes, in which the particles gathering along the rims order due to the van der Waals-type attraction between colloids and the confinement by the length of dodecanethiol. Then at a compromised distance and perfect position giving the minimum free energy, ordering occurs in small domains along the boundary of the hole. When the ordered domains become closer because of the hole growth, they rotate at certain angles and the further ordering appears.     

Formation of gold nanowires through self-assembly during scanning force microscopy

Gold films with a nominal thickness of 5–40 monolayers were grown on dielectric substrates and imaged by scanning force microscopy (SFM). The films originally consisted of well-separated or densely packed clusters. During imaging in contact mode, the morphology of the films changed drastically. At low coverage, i.e. Θ<10 monolayers, the well-known stripes originating from mobile clusters, eventually accumulated into larger aggregates, were observed. In contrast, at larger coverage, highly ordered structures consisting of one-dimensional wires evolved during scanning. They often were parallel with equal separation, i.e. well-defined periodicity, over distances of several μm. Typically, the wires were 5–10 nm high and 50–100 nm wide. Investigations of Au films prepared at varying temperature on different dielectric substrates allow us to suggest a self-assembling mechanism for wire formation in which gold is periodically collected by the SFM tip and redeposited as soon as a critical amount is reached. Received: 22 February 1999 / Accepted: 2 March 1999 / Published online: 7 April 1999     

A Raman study of polymerised C60

60 are reported. Although prepared according to different routes the Raman spectra of the two polymeric phases of C₆₀ show a quantitative agreement with respect to mode positions and intensity. We conclude from this that both materials have the same structure at least in the short range order, i.e. the same type of bonding and co-ordination between neighbouring C₆₀ molecules. An investigation of the time dependence of the thermal decomposition of high pressure polymerised C₆₀ is also presented. The rate of decomposition of the polymeric phase is found to be multi-exponential at all temperatures investigated. From an Arrhenius-type analysis of the short time data and the long time data, respectively, the activation energy for thermal dissociation of polymeric bonds was found to increase with time. Received: 20 September 1996/Accepted: 11 November 1996     

NMR study of the magnetic properties of the polymerized phase of Cs1C60

\chem{Cs_{1}C_{60}} . The NMR spectrum allows, when the Magic Angle Spinning (MAS) technique is used, to get information about the electronic structure of this phase, which points out that the spin density is not uniformly distributed on the ball. An estimation of the strength of the quadrupolar effects on is then given, which shows that it is possible to analyse the spin-lattice relaxation time in terms of magnetic effects. A comparison with the of is then justified and allows us to point out the importance of low dimensional antiferromagnetic fluctuations in this compound. We also investigate the nature of the magnetic ground state in : the broadening of the spectra states unambiguously its magnetic nature and a detailed analysis of their shape gives further indications on the antiferromagnetic nature of the magnetic order, which seems characterized by a large amount of disorder. Received: 19 November 1996/Accepted: 19 December 1996     

Enhanced Field Emission from Well-Patterned Silicon Nanoporous Pillar Arrays

The silicon nanoporous pillar array （Si-NPA） is synthesized by using hydrothermal etching method, and the electron field emission properties are studied. The results show that Si-NPA has a low turn-on field of 1.48 V/μm at the emission current of 0.1 μA and its field emission is relatively stable. The field emission enhancement of Si-NPA is believed to originate from its unique morphology and structure. Our finding demonstrates that the Si-NPA is a promising candidate material for field emission applications.     

Deposition and diffusion of size-selected (Ag400+) clusters on a stepped graphite surface

400 clusters on a stepped graphite surface by a combination of scanning electron microscopy experiments and computer simulations (molecular dynamics and Monte Carlo methods). We find that the shape of the clusters is only partially deformed by the impact with the surface, moreover the clusters do not create surface defects upon landing, and so are able to diffuse freely over the surface. Many clusters are found to become trapped at surface steps, where their mobility is reduced by the higher binding energy. Exploring the 1-D diffusion of clusters along the steps reveals the low mobility for larger islands, as well as the importance of defects on the step (for example kinks), which trap the mobile clusters. Received: 9 April 1998/Accepted: 25 August 1998     

Kinetics of nanocrystallization in FeCoNbB(Cu) alloys

HITPERM alloys (FeCoMBCu; M=Nb, Zr, Hf...) have been recently developed and proposed as competitive soft magnetic materials for high-temperature applications. To our knowledge, this work contains the first results on nanocrystallization isothermal kinetics for these alloys. Analysis of nanocrystallization of the studied FeCoNbB(Cu) alloys in the frame of the Johnson–Mehl–Avrami theory shows a slowing-down of the kinetics and anomalously low values of the Avrami exponent, in a similar way to that reported for FeSiBNbCu (FINEMET)-type alloys. Compositional effects of Co substitution and Cu addition are considered. A more realistic kinetic model developed by Hermann et al. accounts for the experimental data. Received: 14 November 2001 / Accepted: 24 June 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +34-95/461-2097, E-mail: conde@us.es