制备方法对Nd_2O_3上过氧物种光诱导生成的影响

分别采用水解、水热和燃烧法制备了三种主要物相均为立方Nd_2O_3的样品。以325 nm激光为激发源,在室温和空气气氛下对上述样品上过氧物种的光诱导生成情况进行了比较考察。经Raman光谱仪的激光束照射后,三种样品上均可检测到过氧物种的生成,但燃烧法制备的样品上过氧的生成速率显著大于其他两种样品。O_2-和CO_2-TPD(程序升温脱附)的表征结果表明,与水解和水热法制备的立方Nd_2O_3相比,燃烧法制备的样品表面含有更多的低配位晶格氧物种,晶格氧的碱性也更强,因而更有利于在光诱导下与分子氧反应生成过氧物种。     

Ca,Sr共掺杂铈氧化物及其在甲烷氧化偶联反应中的应用

采用柠檬酸法制备了Ca,Sr共掺杂的CeO_2催化剂,发现共掺杂催化剂较单掺杂或未掺杂催化剂呈现出更好的催化甲烷氧化偶联(OCM)反应性能.通过表征可知,Ca,Sr共掺杂催化剂的物相为CeO_2和SrCO_3,Ca高度分散或掺杂于CeO_2之中;CeO_2的粒径明显变小;表面呈中等程度碱性;Ce基催化剂上的亲电氧物种数量随着碱土金属的掺杂而增大,亲电氧物种与晶格氧摩尔比(O_2-2+O-2)/O-2的大小顺序(CeSrCaCe SrCeO_2)与C2选择性一致;且SrCO_3相的存在有助于Ce基氧化物催化甲烷氧化偶联反应(OCM)性能的改善.     

Contribution of the nido-[7,8-C2B9H10]- anion to the chemical stability, basicity, and 31P NMR chemical shift in nido-o-carboranylmonophosphines

The icosahedral dicarboranes and their decapitated anion, 1-R'-1,2-C(2)B(10)H(10) (closo) and [7-R'-7,8-C(2)B(9)H(10)](-) (nido), exert a distict influence at the alpha position of substituents attached to the cage carbon atom. The closo fragment is electron-withdrawing while the nido anion is electron-releasing. These effects are studied by (31)P NMR, phosphorus oxidation, and phosphorus protonation in [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-) species. The (31)P NMR chemical shift dependence is related to the R alkyl or aryl nature of [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-). No direct relationship to the nature of the R substituent on the nido-carboranylmonphosphine toward oxidation has been found. The basicity of the nido-alkylcarboranylmonophosphines is the highest while the lowest corresponds to the nido-arylcarboranylmonophosphines. Interpretation can be carried out qualitatively by considering the electronic properties of the cluster and the nature of the R groups. The influence of R' is less relevant. Confirmation of the molecular structure of the oxidated and protonated nido-carboranylmonophosphine compounds was obtained by X-ray diffraction analysis of [NBu(4)][7-P(O)Ph(2)-8-Ph-7,8-C(2)B(9)H(10)] and [7-PH((i)Pr)(2)-8-Me-7,8-C(2)B(9)H(10)].     

Simple and rapid determination of phosphorus in meat samples by WD-XRF method

The wavelength dispersive X-ray fluorescence (WD-XRF) method for phosphorus determination in meat samples has been described. The effects of sample pretreatment on the XRF analysis have been discussed. The phosphorus content determined in meat samples ranged from 603 ± 6 to 613 ± 19 mg P/100g dry mass (d.m.), depending on the sample preparation technique. The meat samples spiked with phosphates have been used for the calibration procedure. The accuracy was determined against a number of certified reference materials (SMRD 2000, RF 8414, NIST-1568A, and NIST-1549), and recovery was assayed using the standard addition procedure. The proposed method has been compared with the standard spectrophotometric method (PN-ISO 13730, 1999) of total phosphorus determination. The sample pretreatment procedure has been reduced to minimum the presented results suggest the WD-XRF method can be an alternative to the spectrophotometric analysis.     

载Ni双功能碱性沸石催化剂的研究

采用分步浸渍法制备了负载Ni和KOH的NaX沸石催化剂 ,用XRD、TPR、CO2 TPD和XPS等手段对样品的结构、表面碱性、金属组分的可还原性、表面Ni物种的形态等进行了表征 ,对金属组分和碱性组分间的相互作用进行了研究 ,并揭示了这种作用的本质.同时结合丙酮一步法合成甲基异丁基酮的反应 ,探讨了反应性与样品碱性、金属性的关系 ,阐明了该反应中双功能催化剂上金属组分与碱性组分必须匹配合宜的原因     

Nanoscale characterization of redox and acid properties of keggin-type heteropolyacids by scanning tunneling microscopy and tunneling spectroscopy: effect of heteroatom substitution

Nanoscale characterization of acid and redox properties of Keggin-type heteropolyacids (HPAs) with different heteroatoms, H(n)MW(12)O(40) (M = P, Si, B, Co), was carried out by scanning tunneling microscopy (STM) and tunneling spectroscopy (TS) in this study. HPA samples were deposited on highly oriented pyrolytic graphite surfaces to obtain images and tunneling spectra by STM before and after pyridine adsorption. All HPA samples formed well-ordered 2-dimensional arrays on graphite before and after pyridine exposure. NDR (negative differential resistance) peaks were observed in the tunneling spectra. Those measured for fresh HPA samples appeared at less negative voltages with increasing reduction potential of the HPAs and with increases in the electronegativity of the heteroatom, but with decreases in the overall negative charge of the heteropolyanions. These results support the conclusion that more reducible HPA samples show NDR behavior at less negative applied voltages in their tunneling spectra. Introduction of pyridine into the HPA arrays increased the lattice constants of the 2-dimensional HPA arrays by ca. 6 A. Exposure to pyridine also shifted NDR peak voltages of H(n)MW(12)O(40) (M = P, Si, B, Co) samples to less negative values in the TS measurements. The NDR shifts of HPAs obtained before and after pyridine adsorption were correlated with the acid strengths of the HPAs, suggesting that tunneling spectra measured by STM could serve to probe acid properties of HPAs. These results show how one can relate the bulk acid and redox properties of HPAs to surface properties of nanostructured HPA monolayers determined by STM.     

甲烷氧化偶联La－Me－O（Me＝Mg，Ca，Sr，Ba）系催化剂表面氧种的研究

利用ＣＯ_２－ＴＰＤ法考察了Ｌａ－Ｍｅ－Ｏ（Ｍｅ＝Ｍｇ，Ｃａ，Ｓｒ，Ｂａ）系催化剂的表面碱性，并用Ｏ_２－ＴＰＤ、ＣＨ_４－ＴＰＤ法对该体系的表面活性氧种进行了表征，并与催化性能相关联。结果表明，Ｌａ－Ｂａ－Ｏ催化剂由于表面强碱性中心数目多，产生活性氧种的数目也多，有利于甲烷的活化，因而具有最高的甲烷转化率和Ｃ_２烃选择性。脉冲反应表明，在无气相氧存在下，表面晶格氧参与了氧化偶联，而且是选择氧化的活性氧种。     

Field Desorption Mass Spectrometry of Standard Organophosphorus Pesticides and Their Identification in Waste Water

The characteristic behaviour of four groups of commonly used organophosphorus pesticides such as phosphates, phosphorothionates, phosphorothiolates and phosphorodithioates has been investigated by field desorption mass spectrometry. Their spectra show molecular ions of high abundance and characteristic fragmentation patterns. The phosphates and phosphorothionates usually show the α-cleavage with respect to the P-atom with and without proton transfer. In contrast, the phosphorothiolates and phosphorodithioates usually show the β-cleavage from the P-atom. The fragments with the charge retention on the phosphorus moiety were also observed in the field desorption mass spectra, although their abundances were often relatively low.

The analyses of standard mixtures as well as some waste water samples indicate that field desorption mass spectrometry is suitable for the identification of organophosphorus pesticides at nanogram level in mixtures and environmental samples without preliminary separation and purification.     

固体酸WO3/TiO2负载锂锰催化剂组成对其甲烷氧化偶联反应性能的影响

The selective oxidation of methane to basic petrochemicals (ethylene and ethane) is desirable and has attracted extensive research attention. The oxidative coupling of methane (OCM) is considered a promising one-step route for the production of C₂ compounds (ethylene and ethane) from methane, and has been the focus of industrial and fundamental studies. It is widely accepted that the composition is a crucial factor governing the activity of a catalyst system. It was found that the phase structures, basicity, existing status and distribution of the active components, oxygen species, and chemical states of the catalyst were influenced by the composition and ratio, resulting in different catalytic performances for the OCM. In this study, a series of solid acid WO₃/TiO₂-supported lithium-manganese oxide catalysts for OCM were synthesized via the impregnation method. The impacts of diverse compositions, such as the individual contents (Li and Mn) and dual contents (Li-Mn), on the OCM were investigated in detail, using inductively coupled plasma optical emission spectrometry, X-ray diffraction, high-resolution transmission electron microscopy, CO₂-temperature-programmed desorption, O₂-temperature-programmed desorption, H₂-temperature-programmed reduction, Raman spectroscopy, X-ray photoelectron spectroscopy, and CH₄-temperature-programmed surface reaction. The addition of Li content to the catalyst not only led to the anatase-to-rutile crystal structure transformation of TiO₂, and the reduction of the high-valence-state Mn species to low-valence-state Mn, but also increased the content of surface lattice oxygen and decreased the surface basicity. The observed effects on the structures and catalytic performance suggest that the Li content is helpful in suppressing the formation of completely oxidized CO₂, and increases the C₂ selectivity. Moreover, increasing the Li content of the catalyst facilitated the mobility of the lattice oxygen, which triggered the promotion of CH₄ activation, thereby enhancing the OCM catalytic performance. The Mn content acted as the active sites for OCM; therefore, the performance of the catalyst was closely related to the Mn concentration and valence state. However, the WO₃/TiO₂-supported catalyst with excessive Mn content exhibited a high surface basicity, high valence state of Mn, and low abundant lattice oxygen, which was unfavorable for C₂ selectivity. The Raman spectroscopy results revealed that MnTiO₃ was formed due to the co-existence of Li and Mn on WO₃/TiO₂, and played an essential role in improving the low-temperature OCM performance. There was a synergic effect of the Li and Mn components on the OCM. The optimal performance (16.3% C₂ yield) was achieved over the WO₃/TiO₂-supported lithium-manganese catalyst with n(Li) : n(Mn) = 2 : 1 at 750 ℃.     

Determination of trace phosphorus in high purity tantalum materials by inductively coupled plasma mass spectrometry subsequent to matrix separation with on-line anion exchange/coprecipitation

An on-line matrix separation/inductively coupled plasma mass spectrometry (ICP-MS) method is proposed for the determination of trace amounts of phosphorus in high purity tantalum metal, tantalum (V) oxide, and tantalum pentaethoxide. In the present method, the matrix tantalum in the sample solution was adsorbed on the anion exchange resin, and phosphorus (phosphate ion) was eluted with the carrier solution of HF and HNO3 mixture. Then, the effluent solution was subsequently mixed with bismuth solution and aqueous ammonia solution to coprecipitate phosphate together with bismuth hydroxide. The precipitate formed was collected on the in-line membrane filter to wash out nitric acid with pure water, and then dissolved with hydrochloric acid. The obtained phosphorus sample solution was introduced directly into the nebulizer of ICP-MS for the determination of phosphorus. Phosphorus was determined at the molecular ion signal of 31P16O+ (m/z 47). The detection limit (3sigma) of phosphorus in the present method was 1.3 ng mL(-1) as the sample solution basis, and the relative standard deviation for 30 ng mL(-1) of phosphorus in the standard solution was 4.3% in the replicate measurements (n=11). The present method was applied to the analysis of high purity tantalum materials. The concentrations of phosphorus in tantalum samples were in fairly good agreement with those obtained by glow discharge mass spectrometry (GDMS).     

Guanidinophosphazenes: design, synthesis, and basicity in THF and in the gas phase

A principle for creating a new generation of nonionic superbases is presented. It is based on attachment of tetraalkylguanidino, 1,3-dimethylimidazolidine-2-imino, or bis(tetraalkylguanidino)carbimino groups to the phosphorus atom of the iminophosphorane group using tetramethylguanidine or easily available 1,3-dimethylimidazolidine-2-imine. Seven new nonionic superbasic phosphazene bases, tetramethylguanidino-substituted at the P atom, have been synthesized. Their base strengths are established in tetrahydrofuran (THF) solution by means of spectrophotometric titration and compared with those of eight reference superbases designed specially for this study, P2- and P4-iminophosphoranes. The gas-phase basicities of several guanidino- and N',N',N',N'-tetramethylguanidino (tmg)-substituted phosphazenes and their cyclic analogues are calculated, and the crystal structures of (tmg)3P=N-t-Bu and (tmg)3P=N-t-Bu x HBF4 are determined. The enormous basicity-increasing effect of this principle is experimentally verified for the tetramethylguanidino groups in the THF medium: the basicity increase when moving from (dma)3P=N-t-Bu (pKalpha = 18.9) to (tmg)3P=N-t-Bu (pKalpha = 29.1) is 10 orders of magnitude. A significantly larger basicity increase (up to 20 powers of 10) is expected (based on the high-level density functional theory calculations) to accompany the similar gas-phase transfer between the (dma)3P=NH and (tmg)3P=NH bases. Far stronger basicities still are expected when, in the latter two compounds, all three dimethylamino (or tetramethylguanidino) fragments are replaced by methylated triguanide fragments, (tmg)2C=N-. The gas-phase basicity (around 300-310 kcal/mol) of the resulting base, [(tmg)2C=N-]3P=NH, having only one phosphorus atom, is predicted to exceed the basicity of (dma)3P=NH by more than 40 powers of 10 and to surpass also the basicity of the widely used commercial [(dma)3P=N]3P=N-t-Bu (t-BuP4) superbase.     

Ni/Ce-Zr-Al-O催化剂的表面碱性和CO2＋CH4重整性能

用水热法制备了不同NiO含量的Ni/Ce-Zr-Al-O催化剂.用H2-TPD (程序升温脱附),DRIFTS(漫反射红外傅立叶变换光谱),CO2-TPD等方法考察了NiO的含量对催化剂表面碱性的影响,并和反应稳定性以及抗积碳性能相关联.H2-TPD结果表明,随NiO含量的增加,催化剂表面的Ni含量增加.DRIFT和CO2-TPD结果表明CO2的化学吸附主要是碳酸盐和碳酸氢盐形式.添加少量Ni能够使表面碱性位数量显著增加,碱强度减弱.Ni可能优先占据在催化剂表面较强的碱性位上,再增加Ni的含量则会使碱强度减弱,碱性位有所减少,降低CO2的吸附性能,从而减弱从CO2获得活动氧以消碳的能力.这种作用使NiO含量为7.0％(w)的样品活性随反应进行而减低,积碳量是NiO含量为4.0％(w)的样品的3.7倍.     

Effect of matrices and additives on phosphorylated and ketodeoxyoctonic acid lipids A analysis by matrix‐assisted laser desorption ionization‐mass spectrometry

Lipid A is a major compound of the outer membrane of gram‐negative bacteria and is a key factor of bacterial virulence. As lipid A's structure differs among bacterial species and varies between strains of the same species, knowing its modifications is essential to understand its implications in the infectious process. To analyze these lipids, matrix‐assisted laser desorption ionization‐mass spectrometry (MALDI‐MS) is a well‐suited method that is fast and efficient. However, there are limitations with the matrix and additives used, such as the suppression of signal or prompt fragmentations that could give a false overview of lipid A composition in biological samples. For a comprehensive analysis of the entire lipid A species present in a sample, we tested 16 matrices and 11 additives on two commercial lipids A. The first commercial one contains single phosphorylation group, and the second contains two phosphorylation and two ketodeoxyoctonic acid (KDO) groups. The lipid A containing KDO groups was essentially detected by the 3‐hydroxypicolinic acid (3‐HPA) matrix, whereas the monophosphorylated lipid A could be detected by 13 matrices out of the 16. We also demonstrated that the signal of diphosphorylated lipid A can be enhanced with the use of additives in the matrix. Our study indicated that the best conditions to obtain a clear signal of both lipids A without prompt fragmentation was the use of 3‐HPA with 10mM trifluoroacetic acid (TFA).     

铈钼氧化物表面氧性质和催化性能

在甲苯选择性氧化制苯甲醛反应中,Mo基氧化物是一类重要的催化剂[1]．通常的认识是反应物与催化剂表面晶格氧作用,并通过催化剂本身的还原和氧化的循环过程促使反应进行。生成产物．因此,催化剂表面不同氧物种的热脱附性能应与催化反应性能密切相关．对于Ce-Mo氧化物的TPD-MS研究,尚未见文献报导．为了能获得该方面的信息,本文应用程序升温脱附-质谱检测（TP-MS）联用技术,对Ce-Mo氧化物样品进行了表面氧TPD谱测定和动力学参量等计算,并试图与其催化性能进行关联．1实验部分1．1样品的制备和表征分别将一定质量的硝酸铈铵和仲…     

甲烷氧化偶联MgO／BaCO3催化剂的表面结构与催化活性

用ＣＯ２－ＴＰＤ，ＣＯ，ＣＨ４脉冲以及ＥＰＲ，ＸＰＳ等方法对ＭｇＯ／ＢａＣＯ３的表面结构及催化活性进行研究，结果表明，催化剂的碱性，氧扩散速率等对催化剂的活性均有影响。ＢａＣＯ３和ＭｇＯ的共同作用可以增强催化剂的碱性强度?增加强碱中心的量，调变晶格氧的移动性，提高Ｃ２烃的收率和选择性。ＥＰＲ和ＸＰＳ测试结果表明，表面吸附态的氧物种Ｏ＾－２作为甲烷氧化偶联活性氧物种的前驱态在反应反应条件下可转化为活     

配合物生成反应速率常数与平衡常数之间的直线自由能关系 II: 镍(II)-N-(对位取代苯基)氨基乙酸配合物的生成反应动力学研究

应用断流分光光度计(Stopped-Flow Spectrophotometer)研究了镍(II)与N-(对位取代苯基)氨基乙酸-(ρ-RC6H4NHCH2COOH, R=CH3O, CH3, H, Cl, 简写为NROH或HL)在25℃及30%(v/v)乙醇溶液中生成配合物的反应动力学. 实验结果表明, 不仅氨基酸配体的负离子(NRO^-或L^-)具有较高的反应活性, 而且两性离子(HN^+RO^-或^+HL^-)也是有效的反应配体. 反应按双途径进行, 即按Eigen-Tamm机理进行的NRO^-途径和以质子迁移为速率控制步骤的两性离子途径. 两性离子的反应活性(以log kHL^±表示)与配体的碱性强度(pK2)之间呈现直线自由能关系. 并发现镍(II)配合物的离解反应速率常数(log k-L^-)与配体的碱性强度(pK2)和配合物的稳定常数(log KNiL^N^i)之间均存在直线自由能关系.     

Styrene epoxidation with hydrogen peroxide over calcium oxide catalysts prepared from various precursors

A series of CaO samples were prepared by calcination of commercially available and synthesis of calcium salt precursors such as calcium acetate,carbonate,hydroxide and oxalate etc.CaO samples were found to be effective for the epoxidation of styrene using hydrogen peroxide as an oxidant in the presence of acetonitrile.To determine the influence of the physicochemical properties and surface basicity on the catalytic activity,the prepared CaO samples were characterized using thermogravimetry(TG),X-ray diffraction(XRD),scanning electron microscopy(SEM),N2-adsorption and temperature-programmed desorption of CO2(CO2-TPD).The results indicate that the amounts of very strong basic sites and high basicity strength on CaO sample are key factors for its excellent catalytic performance.In contrast,the surface area,porosity and the surface structure of CaO sample have a relatively minor effect on the catalytic activity.CaO sample,obtained by the decomposition of Ca(OH)2,prepared by precipitating calcium nitrate with sodium hydroxide in ethylene glycol solution,exhibits the highest amount of very strong basic sites and stronger strength of basic sites,and therefore it catalyses the epoxidation of styrene with the highest rate among the tested CaO samples.Under the selected reaction conditions,the selectivity of 97.5% to styrene oxide at a conversion in excess of 99% could be obtained.     

镁基复合氧化物催化烯烃环氧化反应

 制备了一系列镁基复合氧化物 MgM-n 样品 (M = Sn, Al, Ti, La, Ce, Zr; n 为 Mg/M 原子比), 用 X 射线衍射、N2 吸附-脱附、CO2 程序升温脱附、紫外可见漫反射光谱和电子自旋共振等手段表征了它们的结构和表面性质, 并考察了其以过氧化氢为氧化剂催化烯烃环氧化反应性能. 结果表明, MgM-n 样品表面碱量和催化性能与其中 M 的种类及含量密切相关. MgSn-4 样品的表面碱量比 MgAl-4 低, 虽两者在催化苯乙烯环氧化反应中, 苯乙烯转化率和环氧化物选择性均为 95% 左右, 过氧化氢利用率大于 80%, 但在循环使用过程中 MgSn-4 的催化性能更为稳定, 并在不同结构烯烃的环氧化反应中表现出优良的催化性能. 这除与 MgSn-4 表面碱强度适当有关外, 还与其中存在高分散的 Sn4+物种及其结构特性有关.     

激光促进甲醇氧化偶联表面反应的规律

用沉淀法制备了Ｌｉ３ＰＯ４、ＢｉＰＯ４和Ｌｉ３ＰＯ４、ＢｉＰＯ４三种固体表面材料,并用ＸＲＤ、ＩＲ、ＴＰＤ和激光促进表面反应（ＬＳＳＲ）等技术研究了这些固体表面上甲醇氧化偶联生成乙二醇的反应规律。实验结果表明：甲醇在固体材料表面的Ｐ＝９键上产生Ｃ－Ｈ端的分子态吸附,在表面的Ｌｅｗｉｓ酸位（金属离子）上产生解离态吸附。Ｌｉ３ＰＯ４和ＢｉＰＯ４的相互作用可促进甲醇在固体表面上的分子态吸附而抑制解离态吸     

阳离子掺杂水滑石的制备及其性质研究

研究了掺杂阳离子水滑石的制备及阳离子对水滑石性质的影响. 分别制备了掺杂Zn2+、Ni2+、Fe3+型的水滑石, 考察了掺杂阳离子对水滑石晶相结构、层间距、层间阴离子含量、水滑石表面形态、水滑石碱性的影响, 结果表明, 由于阳离子的引入, 导致水滑石层间距减小及层间阴离子结合量降低, 且使水滑石培烧产物电负性提高, 并最终降低其碱性. 以上述水滑石培烧产物作为固体碱催化剂促进苯甲醛和丙醛缩合, 合成α-甲基肉桂醛, 关联了水滑石培烧产物碱性与反应活性的关系.