Comprehensive gas chromatography coupled to mass spectrometry for the separation of pesticides in a very complex matrix

The present research is focused on the development of a comprehensive two-dimensional gas chromatography–rapid scanning quadrupole mass spectrometric (GC x GC-qMS) methodology for the analysis of trace-amount pesticides contained in a complex real-world sample. Reliable peak assignment was carried out by using a recently developed, dedicated pesticide MS library (for comprehensive GC analysis), characterized by a twin-filter search procedure, the first based on a minimum degree of spectral similarity and the second on the interactive use of linear retention indices (LRI). The library was constructed by subjecting mixtures of commonly used pesticides to GC x GC-qMS analysis and then deriving their pure mass spectra and LRI values. In order to verify the effectiveness of the approach, a pesticide-contaminated red grapefruit extract was analysed. The certainty of peak assignment was attained by exploiting both the enhanced separation power of dual-oven GC x GC and the highly effective search procedure.     

Determination of priority pesticides in baby foods by gas chromatography tandem quadrupole mass spectrometry

A gas chromatography-tandem quadrupole mass spectrometry (GC-MS/MS) method for the determination of twelve priority pesticides, and transformation products (e.g. metabolites) specified in the EU Baby Food Directive 2003/13/EC is described. Prior to GC-MS/MS analysis, co-extractives were removed from acetonitrile extracts using dispersive solid phase extraction with octadecyl (200 mg) and primary secondary amine (50 mg) sorbents. The clean up proved essential for the satisfactory long-term chromatographic performance during the analysis of a range of representative commercially pre-prepared baby food samples. Extracts spiked with pesticides at 1-8 microg kg(-1), yielded average recoveries in the range 60-113% with relative standard deviations less than 28%.     

Studies on thermionic ionisation detection in comprehensive two-dimensional gas chromatography

This study explores the application of specific thermionic ionisation detection in comprehensive 2-D GC (GC x GC) and represents the first report of GC x GC with nitrogen phosphorus detection (GC x GC-NPD). Of particular interest is the performance of the NPD with respect to peak parameters of asymmetry and sensitivity. Since GC x GC produces much narrower peaks than obtained with fast GC (e.g. 100 ms vs. <1 s) the effect of detector response time and any lack of symmetry arising from the detection step is important if peak separation (resolution) is to be maintained. It was observed that detector gas flows had a significant impact on peak asymmetry and peak magnitude, and that optimisation of the detector was critical, particularly for complex sample analysis by GC x GC-NPD. Peak asymmetries ranging from As = 1.8 to 8.0 were observed under different conditions of detector gas flows. Comparison of GC x GC-NPD with GC x GC-flame ionisation detection (FID) showed the former to be approximately 20 times more sensitive for the detection of nitrogen-containing methoxypyrazines analytes, and GC x GC-NPD had a larger linear detection range compared to GC x GC-FID. Furthermore, comparison of GC x GC-NPD and GC x GC-TOFMS chromatograms for the analysis of coffee head-space demonstrated the benefits of selective detection, ultimately realised in a comparatively simplified contour plot.     

Identification of volatiles from pineapple (Ananas comosus L.) pulp by comprehensive two-dimensional gas chromatography and gas chromatography/mass spectrometry

Combining qualitative data from the chromatographic structure of 2-D gas chromatography with flame ionization detection (GC×GC-FID) and that from gas chromatography-mass spectrometry (GC/MS) should result in a more accurate assignment of the peak identities than the simple analysis by GC/MS, where coelution of analytes is unavoidable in highly complex samples (rendering spectra unsuitable for qualitative purposes) or for compounds in very low concentrations. Using data from GC×GC-FID combined with GC/MS can reveal coelutions that were not detected by mass spectra deconvolution software. In addition, some compounds can be identified according to the structure of the GC×GC-FID chromatogram. In this article, the volatile fractions of fresh and dehydrated pineapple pulp were evaluated. The extraction of the volatiles was performed by dynamic headspace extraction coupled to solid-phase microextraction (DHS-SPME), a technique appropriate for slurries or solid matrices. Extracted analytes were then analyzed by GC×GC-FID and GC/MS. The results obtained using both techniques were combined to improve compound identifications.     

Quantification of nitrogen compounds in diesel fuel samples by comprehensive two‐dimensional gas chromatography coupled with quadrupole mass spectrometry

Although several methods for the analysis of nitrogen compounds in diesel fuel have been described in the literature, the demand for rapid, sensitive, and robust analyses has increased in recent years. In this study, a comprehensive two‐dimensional gas chromatographic method was developed for the identification and quantification of nitrogen compounds in diesel fuel samples. The quantification was performed using the standard addition method and the analysis was conducted using comprehensive two‐dimensional gas chromatography coupled with fast quadrupole mass spectrometry. This study is the first to report quantification of nitrogen compounds in diesel fuel samples using the standard addition method without fractionation. This type of analysis was previously performed using many laborious separation steps, which can lead to errors and losses. The proposed method shows good linearity for target nitrogen compounds evaluated (m‐toluidine, 4‐ethylaniline, indole, 7‐methylindole, 7‐ethylindole, carbazole, isoquinoline, 4‐methylquinoline, benzo[h]quinolone, and acridine) over a range from 0.05 to 2.0 mg/L, and limits of detection and quantification of <0.06 and 0.16 mg/L, respectively, for all nitrogen compounds studied.     

Elucidation of fatty acid profiles in vegetable oils exploiting group-type patterning and enhanced sensitivity of comprehensive two-dimensional gas chromatography

The present research is focused on the use of comprehensive 2-D GC (GCxGC) for the thorough elucidation of fatty acid (FA) profiles contained in vegetable oils; the samples analysed consisted of extra-virgin olive oil and refined hazelnut oil. The enhanced sensitivity and the formation of group-type patterns provided by GCxGC enabled the identification and quantification of both well-known and rather unexpected FAs contained in the lipid matrices. Peak assignment was, in most cases, supported by using pure standard compounds. Of particular interest was the identification of a series of odd-numbered FAs in both samples. The results attained to demonstrate the usefulness of GCxGC also for the analysis of supposedly low-complex samples.     

Comprehensive two-dimensional gas chromatographic analysis of commercial lemon-flavored beverages

Fresh lemon juice and lemon-flavored beverages were analyzed by using comprehensive 2-D GC (GC x GC) with flame-ionization detection, with a nonpolar-polar column combination. A low-alcohol, ready-to-drink (RTD) beverage was also analyzed as fresh, and after deterioration for 12 days at 50 degrees C. Identification of some of the components in the 2-D plots was performed by comparison of peak positions of authentic standards and comparison with 1-D GC. However, without the aid of GC x GC-mass spectral data, only 24 components were identified; a large number of components remained unassigned. In some soft drinks obtained in the market, components indicative of deterioration, such as p-methylacetophenone and p-cymen-8-ol were already present in the products. In contrast, even upon heat challenge, a low-alcohol RTD beverage did not generate deterioration products of citral, such as p-methylacetophenone and the intermediates, p-menth-2-ene-1,8-diols. This was apparently related to the fact that the original formulation contained only a minute amount of the citral ingredient.     

气相色谱-负化学源-三重四极杆质谱法测定化妆品中的硝基麝香类化合物

建立了一种用于不同化妆品中5种硝基麝香含量的气相色谱-负化学离子源三重四极杆质谱联用(GC-MS/MS)检测方法。采用丙酮/正己烷混合溶液超声提取化妆品中的硝基麝香,将提取液浓缩,以CNWBOND Si固相萃取柱净化。再由GC-MS/MS检测,氘代二甲苯麝香内标法定量。该方法对化妆品中5种硝基麝香的加标回收率为85.81%～103.77%,相对标准偏差(RSD)不大于5.32%,灵敏度高,定量限为50.0～500 ng/kg;选择性好,能有效消除复杂基体干扰。可作为常见化妆品中硝基麝香类化合物含量检测的确证方法。     

On-line analysis of complex hydrocarbon mixtures using comprehensive two-dimensional gas chromatography

This paper discusses the first setup for on-line qualitative and quantitative comprehensive two-dimensional gas chromatography (GC × GC) of complex hydrocarbon mixtures. A built-in 4-port 2-way valve allows switching between flame ionization detection (FID) and time-of-flight mass spectrometry (TOF-MS) between runs, without the need to cool down and vent the MS. Proper selection of GC carrier gas flow rates enables maximal agreement between the obtained chromatograms in both configurations. For on-line analysis of reactor effluents, a dedicated sampling system allows automatic sampling of the hot reactor effluent gases and immediate injection of the sample on the GC × GC. To determine a complete effluent composition in a single run of the GC × GC, a subzero oven starting temperature was employed. Modulation is started when the oven temperature reaches 40 °C, thus dividing the chromatogram in a conventional 1D and a comprehensive 2D part. This work illustrates the mature and robust character of GC × GC, extending its capabilities from mere laboratory use to on-line routine analysis for industrial processes in the (petro-)chemical industry.     

全二维气相色谱-飞行时间质谱联用技术分析重馏分油中芳烃组成

通过对升温速度、二维补偿温度、调制周期等关键实验参数的优化,建立了全二维气相色谱-飞行时间质谱(GC×GC-TOF MS)分析重馏分油中芳烃组分的方法,得到了重馏分油芳烃组分按环数分布的二维点阵图。根据谱库检索、标准化合物对照及文献报道,对重馏分油芳烃组分中菲、甲基菲及芘、苯并蒽等常见多环芳烃(PAH)进行了准确定性,并将该方法应用到重馏分油加氢处理工艺研究中,对菲、芘的加氢处理产物进行了定性分析。该研究为重馏分油芳烃组分的准确定性提供了新的技术手段,为加深对油品加氢规律的认识提供了技术支持。全二维气相色谱与普通一维色谱对比,在重馏分油的芳烃组分分析上体现了极大优势。     

Evaluation of a retention model in comprehensive two-dimensional gas chromatography

Modeling the retention in comprehensive two-dimensional gas chromatography (GC x GC) was achieved using retention indices obtained in conventional GC. Predicted results were compared with experimental data obtained in the two-dimensional separation of a synthetic hydrocarbon mixture. This proved to be helpful in optimizing the operating conditions of GC x GC separation of a complex petroleum sample and in identifying chemical families.     

Informatics for cross-sample analysis with comprehensive two-dimensional gas chromatography and high-resolution mass spectrometry (GCxGC-HRMS)

This paper describes informatics for cross-sample analysis with comprehensive two-dimensional gas chromatography (GCxGC) and high-resolution mass spectrometry (HRMS). GCxGC-HRMS analysis produces large data sets that are rich with information, but highly complex. The size of the data and volume of information requires automated processing for comprehensive cross-sample analysis, but the complexity poses a challenge for developing robust methods. The approach developed here analyzes GCxGC-HRMS data from multiple samples to extract a feature template that comprehensively captures the pattern of peaks detected in the retention-times plane. Then, for each sample chromatogram, the template is geometrically transformed to align with the detected peak pattern and generate a set of feature measurements for cross-sample analyses such as sample classification and biomarker discovery. The approach avoids the intractable problem of comprehensive peak matching by using a few reliable peaks for alignment and peak-based retention-plane windows to define comprehensive features that can be reliably matched for cross-sample analysis. The informatics are demonstrated with a set of 18 samples from breast-cancer tumors, each from different individuals, six each for Grades 1-3. The features allow classification that matches grading by a cancer pathologist with 78% success in leave-one-out cross-validation experiments. The HRMS signatures of the features of interest can be examined for determining elemental compositions and identifying compounds.     

Simultaneous analysis of polychlorinated biphenyls and polychlorinated naphthalenes by isotope dilution comprehensive two-dimensional gas chromatography high-resolution time-of-flight mass spectrometry

Polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) are listed as persistent organic pollutants (POPs) under the Stockholm Convention. Because they have similar physical and chemical properties, they are coeluted and are usually analyzed separately by different gas chromatography high-resolution mass spectrometry (GC-HRMS) methods. In this study, a novel method was developed for simultaneous analysis of six indicator PCBs, 12 dioxin-like PCBs, and 16 PCNs using isotope dilution comprehensive two-dimensional gas chromatography with high-resolution time-of-flight mass spectrometry (GC × GC-HRTOF-MS). The method parameters, including the type of GC column, oven temperature program, and modulation period, were systematically optimized. Complete separation of all target analytes and the matrix was achieved with a DB-XLB column in the first dimension and a BPX-70 column in the second dimension. The isotope dilution method was used for quantification of the PCBs and PCNs by GC × GC-HRTOF-MS. The method showed good linearity from 5 to 500 pg μL⁻¹ for all the target compounds. The instrumental limit of detection ranged from 0.03 to 0.3 pg μL⁻¹ for the 18 PCB congeners and from 0.09 to 0.6 pg μL⁻¹ for the 16 PCN congeners. Repeatability for triplicate injections was always lower than 20%. The method was successfully applied to the determination of 18 PCBs present at 0.9–2054 pg g⁻¹ and 16 PCNs present at 0.2–15.7 pg g⁻¹ in three species of fish. The GC × GC-HRTOF-MS results agreed with those obtained by GC-HRMS. The GC × GC-HRTOF-MS method proved to be a sensitive and accurate technique for simultaneous analysis of the selected PCBs and PCNs. With the excellent chromatographic separation offered by GC × GC and accurate mass measurements offered by HRTOF-MS, this method allowed identification of non-target contaminants in the fish samples, including organochlorine pesticides and polycyclic aromatic hydrocarbons.     

Quantification of mequitazine in human plasma by gas chromatography– quadrupole mass spectrometry and its application to a human pharmacokinetic study

A specific and sensitive gas chromatography–mass spectrometry (GC‐MS) with quadrupole mass analyzer type was developed and validated for the quantitative analysis of mequitazine in human plasma. After liquid–liquid extraction of plasma samples containing mequitazine and promethazine (internal standard, IS) using hexane with pH adjustment, the extract was evaporated and an aliquot of reconstituted residue was injected into the GC‐MS system. The assay showed linearity over a concentration range from 1 to 50 ng/mL. Intra‐ and inter‐day precision for mequitazine was <9.09 and 9.29%, respectively, and intra‐ and inter‐day accuracy ranged from ?7.97 to 9.05% and from ?1.51 to 7.89%, respectively. The lower limit of quantification was 1 ng/mL in the present assay. The developed analytical method was successfully applied to a pharmacokinetic study after a single oral administration of mequitazine in human subjects. Copyright © 2015 John Wiley & Sons, Ltd.     

Stir bar sorptive extraction and comprehensive two-dimensional gas chromatography coupled to high-resolution time-of-flight mass spectrometry for ultra-trace analysis of organochlorine pesticides in river water

A method for the determination of ultra-trace amounts of organochlorine pesticides (OCPs) in river water was developed by using stir bar sorptive extraction (SBSE) followed by thermal desorption and comprehensive two-dimensional gas chromatography coupled to high-resolution time-of-flight mass spectrometry (SBSE-TD-GC×GC-HRTOF-MS). SBSE conditions such as extraction time profiles, phase ratio (β: sample volume/polydimethylsiloxane (PDMS) volume), and modifier addition, were examined. Fifty milli-liter sample including 10% acetone was extracted for 3 h using stir bars with a length of 20 mm and coated with a 0.5 mm layer of PDMS (PDMS volume, 47 μL). The stir bar was thermally desorbed and subsequently analyzed by GC×GC-HRTOF-MS. The method showed good linearity over the concentration range from 50 to 1000 pg L(-1) or 2000 pg L(-1) for all analytes, and the correlation coefficients (r(2)) were greater than 0.9903 (except for β-HCH, r(2)=0.9870). The limit of detection (LOD) ranged from 10 to 44 pg L(-1). The method was successfully applied to the determination of 16 OCPs at pg L(-1) to ng L(-1) in river water. The results agree fairly well with the values obtained by a conventional liquid-liquid extraction (LLE)-GC-HRMS (selected ion monitoring: SIM) method using large sample volume (20 L). The method also allows screening of non-target compounds, e.g. pesticides and their degradation products, polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and pharmaceuticals and personal care products (PPCPs) and metabolites in the same river water sample, by using full spectrum acquisition with accurate mass in GC×GC.     

Comparison of comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry and gas chromatography-mass spectrometry for the analysis of tobacco essential oils

A sample of tobacco essential oil was analyzed using gas chromatography-mass spectrometry (GC/MS) and comprehensive two-dimensional gas chromatography coupled to a time-of-flight mass spectrometry (GC × GC/TOFMS), respectively. In the GC/MS analysis, serially coupled columns were used. By comparing the GC/MS results with GC × GC/TOFMS results, many more components in the essential oil could be found within the two-dimensional separation space of GC × GC. The quantitative determination of components in the essential oil was performed by GC × GC with flame ionization detection (FID), using a method of multiple internal standards calibration.     

Qualitative and quantitative study of nitrogen-containing compounds in heavy gas oil using comprehensive two-dimensional gas chromatography with nitrogen phosphorus detection

In this work, a GCxGC-nitrogen-phosphorus detection (NPD) methodology was developed to separate and quantitate nitrogen-containing compounds in Brazilian heavy gas oil. First, the NPD performance was improved in order to achieve best GCxGC performance. The geometry of this detector was also evaluated. The use of an extended jet improved significantly the peak shape. The GCxGC separation was studied using both first and second dimension columns with different internal diameters. The use of a thicker film in both dimensions provided better performance. LODs of 0.16-8.49 pg of individual compounds were achieved. Two different extraction techniques of the neutral and basic nitrogen-containing compounds were also evaluated. The method using ion-exchange resins to separate neutral and basic nitrogen-containing compounds was more efficient than the method using modified silica. As an example, the amounts (microg/g) of each class reported were: indole (2.77), alkyl carbazoles ranging from C(0) to C(6+) (1.467), alkyl benzocarbazoles from C(0) to C(4+) (793), alkyl quinolines (31.2) and alkyl benzoquinolines (21.6) were quantitated.     

Chemical characterization of aromatic compounds in extra heavy gas oil by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-TOFMS) was used for the characterization of aromatic compounds present in extra heavy gas oil (EHGO) from Brazil. Individual identification of EHGO compounds was successfully achieved in addition to group-type separation on the chromatographic plane. Many aromatic hydrocarbons, especially polycyclic aromatic hydrocarbons and sulfur compounds, were detected and identified, such as chrysenes, phenanthrenes, perylenes, benzonaphthothiophenes and alkylbenzonaphthothiophenes. In addition, triaromatic steroids, methyl-triaromatic steroids, tetrahydrochrysenes and tetraromatic pentacyclic compounds were present in the EHGO aromatic fractions. Considering the roof-tile effect observed for many of these compound classes and the high number of individual compounds identified, GC×GC-TOFMS is an excellent technique to characterize the molecular composition of the aromatic fraction from EHGO samples. Moreover, data processing allowed the quantification of aromatic compounds, in class and individually, using external standards. EHGO data were obtained in μgg(-1), e.g., benzo[a]pyrene were in the range 351 to 1164μgg(-1). Thus, GC×GC-TOFMS was successfully applied in EHGO quantitative analysis.     

捕集阱顶空气相色谱/质谱法测定水中的二氯一溴甲烷

建立了捕集阱顶空气相色谱/质谱测定水中二氯一溴甲烷的方法。采用正交实验设计对平衡温度、平衡时间、循环次数3个参数进行了优化,在平衡温度70 ℃、平衡时间20 min、循环次数2次的优化条件下,对水中的二氯一溴甲烷进行测定。结果显示,在0.1～10.0 μg/L范围内,二氯一溴甲烷的质量浓度和峰面积呈良好的线性关系,相关系数为0.9991。方法的检出限(S/N=3)为0.03 μg/L,定量限(S/N=10)为0.1 μg/L,回收率为83.1%～111.3%,相对标准偏差为1.7%～5.2%(n=6)。将该方法应用于水中二氯一溴甲烷的定性定量分析,效果良好。