Analysis of glycoprotein-derived oligosaccharides in glycoproteins detected on two-dimensional gel by capillary electrophoresis using on-line concentration method

Capillary electrophoresis (CE) is an effective tool to analyze carbohydrate mixture derived from glycoproteins with high resolution. However, CE has a disadvantage that a few nanoliters of a sample solution are injected to a narrow capillary. Therefore, we have to prepare a sample solution of high concentration for CE analysis. In the present study, we applied head column field-amplified sample stacking method to the analysis of N-linked oligosaccharides derived from glycoprotein separated by two-dimensional gel electrophoresis. Model studies demonstrated that we achieved 60-360 times concentration effect on the analysis of carbohydrate chains labeled with 3-aminobenzoic acid (3-AA). The method was applied to the analysis of N-linked oligosaccharides from glycoproteins separated and detected on PAGE gel. Heterogeneity of alpha1-acid glycoprotein (AGP), i.e. glycoforms, was examined by 2D-PAGE and N-linked oligosaccharides were released by in-gel digestion with PNGase F. The released oligosaccharides were derivatized with 3-AA and analyzed by CE. The results showed that glycoforms having lower pI values contained a larger amount of tetra- and tri-antennary oligosaccharides. In contrast, glycoforms having higher pI values contained bi-antennary oligosaccharides abundantly. The result clearly indicated that the spot of a glycoprotein glycoform detected by Coomassie brilliant blue staining on 2D-PAGE gel is sufficient for quantitative profiling of oligosaccharides.     

Hemoglobin A2 quantification by capillary zone electrophoresis

Hemoglobin A2 (HbA2) comprises about 2.2% of the total hemoglobin in the erythrocytes. The separation and quantitation of this minor hemoglobin by capillary electrophoresis (CE) using an arginine Tris buffer is described. Some of the variables affecting the accuracy and precision of HbA2 quantification are investigated. Furthermore, the quantification of this hemoglobin by CE is compared to that of a microcolumn chromatography method. The CE method is better suited than the microcolumn method for measuring HbA2 in the sickle cell trait.     

Comprehensive assessment of N-glycans derived from a murine monoclonal antibody: a case for multimethodological approach

Highly efficient separation techniques, laser-induced fluorescence (LIF) detection, and different mass-spectrometric (MS) measurements were combined in a multimethodological scheme to perform a comprehensive structural characterization of N-linked oligosaccharides in a murine monoclonal antibody (immunoglobulin G (IgG(kappa))). Monosaccharide compositional analysis was carried out through a capillary electrophoresis (CE)-LIF method, in which the chemically and enzymatically released sugars were fluorescently labeled. This analysis provides a preliminary assessment of certain structures, being followed by CE-LIF and matrix-assisted laser desorption/ionization (MALDI)-MS profiling of the intact glycan structures. Linkages and monosaccharide residues were confirmed by MALDI-MS in conjunction with exoglycosidase digestion. MALDI-MS and CE data were effectively combined to reveal the overall structural diversity of both acidic and neutral glycans. Finally, the sites of glycosylation and site occupancies were deduced through the measurements performed with microcolumn liquid chromatography coupled via electrospray to a quadrupole/time-of-flight instrument.     

Comparison between capillary electrophoresis and liquid chromatography for the determination of diclofenac sodium in a pharmaceutical tablet

Two novel analytical methodologies using capillary electrophoresis (CE) and liquid chromatography (LC) were developed and compared for the determination of diclofenac sodium in commercial and simulated tablet formulations. The CE analysis was performed in a bare fused-silica capillary with 75 microm id and total length of 50 cm (28 cm to the detector) with a buffer solution of 20 mM sodium tetraborate, pH 9.23. The applied voltage was 20 kV, and acetaminophen was used as the internal standard (IS). The LC analysis was performed with a LiChrospher 100 RP-18 (5 microm) column and a mobile phase of methanol-diluted glacial acetic acid (0.3 parts in 2500; 75 + 25) at a flow rate of 0.9 mL/min with propylparaben as the IS. In both analyses, detection was by ultraviolet absorption at 276 nm. Under optimized conditions, the CE migration times for the diclofenac sodium standard and acetaminophen (IS) were 2.07 and 1.59 min, respectively, and the LC retention times for the diclofenac sodium standard and propylparaben (IS) were 3.98 and 2.26 min, respectively. The resolution and efficiency for CE were 14.2 and 1.6 x 10(5) plates/m, respectively, and for LC, 5.0 and 8.6 x 10(3) plates/m, respectively. Calibration curves of peak area versus concentration gave correlation coefficients of 0.9992 for CE and 0.9994 for LC. The limits of detection and quantitation were 8.40 and 25.46 microg/mL, respectively, for CE and 4.60 and 13.93 microg/mL, respectively, for LC. Coefficients of variation were 1.68 and 0.37% for CE and LC, respectively. Average recoveries obtained with CE and LC were 103.12+/-0.90 and 99.59+/-0.21%, respectively. Although both methodologies were shown to be suitable for the determination of diclofenac sodium in tablets, performing in a similar manner with regard to several aspects (linearity, recovery, and specificity), CE provided faster analysis and better column efficiency, whereas LC provided superior repeatability and sensitivity.     

Recent developments in microcolumn liquid chromatography.

An overview of the most recent developments in microcolumn liquid chromatography (LC) is presented. A short theoretical discussion on chromatographic dilution and extracolumn bandbroadening is given and also the recent progress and advances in column technology and instrumentation are reviewed. However, the emphasis of this review is on miniaturized sample clean-up, sample introduction techniques and on both established and more recent detection techniques for microcolumn LC. The hyphenation of miniaturized LC columns with other techniques, specifically on multidimensional chromatography and the coupling of microcolumn LC to mass spectrometry is discussed in detail. Both the on-line and automated off-line interfacing to other separation and detection techniques will also be addressed. Finally, a number of typical microcolumn LC applications are presented in order to demonstrate the potential of microcolumn LC methods in a variety of scientific areas.     

Cyclodextrin-aided determination of iodate and bromate in drinking water by microcolumn ion chromatography with precolumn enrichment.

A selective and simple method for the determination of iodate (IO3-) and bromate (BrO3-) by microcolumn ion chromatography (IC) is presented. In this study, IO3- and BrO3- were determined as IBr2- and tribromide (Br3-), respectively, via a postcolumn reaction with bromide (Br) under acidic conditions with the aid of alpha-cyclodextrin (alpha-CD) in microcolumn IC. IO3- and BrO3- were selectively detected by the present method at a wavelength of 253 or 265 nm. The present system achieved good selectivity for IO3- and BrO3- as well as good repeatability under suitable conditions. Precolumn enrichment improved the detection limit, and allowed the determination of BrO3- in bottled water as low as sub microg L(-1) level in microcolumn IC.     

A sheath flow gating interface for the on-line coupling of solid-phase extraction with capillary electrophoresis

A sheath flow gating interface (SFGI) is presented for the on-line coupling of solid-phase extraction (SPE) with capillary electrophoresis (CE). The design, construction and operation of the SFGI are described in detail. After operating conditions were investigated and selected, the SFGI was evaluated on a SPE–CE–UV setup using hydroxylated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith as the absorbent and using three phenols as the test analytes. The preconcentration factors obtained with the SPE–CE–UV system and the SPE–UV part are 530 and 550, respectively. The plate numbers obtained using the SPE–CE–UV system are slightly better than or comparable to those with the CE–UV part. The precisions (RSDs) of 100 consecutive injections are 2.43%, 3.86%, and 4.25% for peak height, peak area and migration time, respectively. The measured recoveries for the river water samples spiked at three different levels are in the range of 93.6–102.8% with the interday RSD values ranging from 2.0 to 4.5% (n = 3). These data collectively demonstrate that the SFGI has the ability to exactly and reproducibly transfer nanoliters of fractions from SPE onto CE with no degradation of the efficiencies of SPE and CE, suggesting a great potential to be routinely used for the coupling of SPE, microcolumn LC or FIA with CE.     

Nanometer‐sized alumina packed microcolumn solid‐phase extraction combined with field‐amplified sample stacking‐capillary electrophoresis for the speciation analysis of inorganic selenium in environmental water samples

In this paper, a new method of nanometer‐sized alumina packed microcolumn SPE combined with field‐amplified sample stacking (FASS)–CE‐UV detection was developed for the speciation analysis of inorganic selenium in environmental water samples. Self‐synthesized nanometer‐sized alumina was packed in a microcolumn as the SPE adsorbent to retain Se(IV) and Se(VI) simultaneously at pH 6 and the retained inorganic selenium was eluted by concentrated ammonia. The eluent was used for FASS–CE–UV analysis after NH₃ evaporation. The factors affecting the preconcentration of both Se(IV) and Se(VI) by SPE and FASS were studied and the optimal CE separation conditions for Se(IV) and Se(VI) were obtained. Under the optimal conditions, the LODs of 57 ng L^?1 (Se(IV)) and 71 ng L^?1 (Se(VI)) were obtained, respectively. The developed method was validated by the analysis of a certified reference material of GBW(E)080395 environmental water and the determined value was in a good agreement with the certified value. It was also successfully applied to the speciation analysis of inorganic selenium in environmental water samples, including Yangtze River water, spring water, and tap water.     

Indirect conductimetric detection of cyclodextrins in liquid chromatography

Indirect conductimetric detection of cyclodextrins (CDs) was investigated in liquid chromatography (LC). The mobile phase contained an electrolytic substance which maintained high background, and CDs were indirectly detected owing to a depression of the background signal due to dilution of the mobile phase by the analyte molecules. The dynamic reserve, defined as the ratio of the background to its noise level, was (1–2) × 10⁵, and the detection limits at S/N = 3 were 23–40 ng for CDs when a microcolumn LC system was employed.     

Separation and identification of the organic acids in Angelicae Radix and Ligustici Rhizoma by HPLC and CE

Angelicae Radix (AR) and Ligustici Rhizoma (LR) are both derived from the Umbelliferae plants and contain similar organic acids as their bioactive compounds. Nine of these organic acids, including nicotinic acid, protocatechuic acid, phthalic acid, folinic acid, p-hydroxybenzoic acid, folic acid, vanillic acid, caffeic acid, and ferulic acid were separated by HPLC and CE. Detection at 210 nm with a linear gradient containing 20 mM KH2PO4 (pH 3.5) and H2O-CH3CN in HPLC and with a buffer solution containing 10 mM LTAC, 2 mM Na2HPO4, 9 mM Na2B4O7(pH 9.56), and CH3CN in CE were found to be the most efficient eluents for this separation. The contents of the nine components in crude extracts of either AR or LR could easily be determined within 60 min by LC and within 20 min by CE. The structures of the individual peaks in the LC chromatogram were identified by LC-MS. The effects of buffers on the separation and validation of the two methods were examined.     

Analysis of polar hydrophilic aromatic sulfonates in waste water treatment plants by CE/MS and LC/MS

The present work describes the development and optimization of a capillary (zone) electrophoresis/mass spectrometric (CE/MS) analysis method for polar hydrophilic aromatic sulfonates (ASs). The compounds were detected by negative ion electrospray ionization (NIESI) and selected ion monitoring (SIM). In comparison with CE/UV, for CE/MS a lower-concentration volatile ammonium acetate buffer (5 mM) without organic modifier and a higher separation voltage were better suited for separation. Sensitivity of CE/MS was slightly better than for CF/UV, with the limit of detection (LOD) ranging between 0.1 and 0.4 mg l(-1). For verification of the CE/MS results, ASs were also analysed by ion-pair liquid chromatography/diode array UV detection coupled in series with electrospray mass spectrometry (IPC/DAD/ESI-MS). Real water samples of different waste water treatment plants (WWTPs) in Catalonia (NE Spain) were extracted by solid-phase extraction (SPE) with LiChrolut EN and analysed with CE/MS and LC/MS. ASs were found in influent and effluent water samples of the WWTPs in the microg l(-1) concentration range. LC/MS offered a higher separation efficiency and sensitivity than CE/MS. Therefore with LC/MS more compounds could be identified in the WWTPs. The persistency of the ASs was distinct: some compounds were well degraded during the water treatment process, while others were quite persistent.     

Separation, identification, and interaction of heparin oligosaccharides with granulocyte-colony stimulating factor using capillary electrophoresis and mass spectrometry

A capillary electrophoresis (CE) method was developed for the separation of heparin oligosaccharides compatible to study the interactions between the oligosaccharides and granulocyte-colony stimulating factor (G-CSF). Unfractionated heparin was eliminitively degraded to heparin oligosaccharides by an endolytic heparinase. The degraded smaller oligosaccharides (M(r) < 1000) were baseline-separated by CE under a 50 mM phosphate buffer (pH 9.0) in 10 min. Standard heparin disaccharides and larger oligosaccharides (1000 < M(r) < 8000) were all separated under optimized separation conditions. Compared with standard heparin disaccharides, smaller oligosaccharides contained one nonsulfated, two monosulfated, and two disulfated disaccharides, but trisulfated disaccharides were not found. The smaller oligosaccharides were also identified and molecular mass was deduced by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, interactions between G-CSF and the oligosaccharides were studied by using capillary zone electrophoresis (CZE) under the above separation conditions. It was found that larger oligosaccharides could interact with G-CSF while smaller oligosaccharides were not observed to bind to G-CSF under the experimental conditions. In conclusion, the purified heparinase could selectively degrade heparin into oligosaccharides and the interaction between G-CSF and heparin was correlated with the chain length of heparin.     

Analysis of high-mannose-type oligosaccharides by microliquid chromatography-mass spectrometry and capillary electrophoresis

We report on microbore liquid chromatography (microLC) and capillary electrophoresis (CE) separation of glycopeptides and high-mannose-type oligosaccharides, digested from recombinant phospholipase C, expressed in Pichia pastoris. The glycopeptides were subject to microLC/electrospray ionization/mass spectrometry (ESI-MS) and microLC/ESI-tandem MS (MS/MS) analysis that revealed high-mannose structure size variation between Man(7)GlcNAc(2) and Man(14)GlcNAc(2). Then, high-performance CE was applied to identify possible positional isomers of the high-mannose structures. For the CE experiments, the oligosaccharides were released from the glycoproteins by peptide-N-glycosidase F and labeled with 1-aminopyrene-3,6,8-trisulfonic acid (APTS). Excellent separation of the possible positional isomers was attained, suggesting one for Man(9)GlcNAc(2), two for Man(10)GlcNAc(2), three for Man(11)GlcNAc(2), Man(12)GlcNAc(2), and Man(13)GlcNAc(2), and two for Man(14)GlcNAc(2). The CE results provided complementary information to the microLC/ESI-MS and MS/MS data with respect to the possible number of positional isomers.     

Indirect amperometric detection of underivatized amino acids in microcolumn liquid chromatography with carbon film based ring-disk electrodes

An indirect amperometric detection of underivatized amino acids has been developed using a carbon film based ring-disk electrode (CFBRDE) in microcolumn liquid chromatography (LC). Bromide present in the mobile phase could be efficiently oxidized to bromine at the upstream (disk) electrode, and was subsequently detected at the downstream (ring) electrode. Most of the underivatized amino acids that are electroinactive under conventional amperometric conditions react rapidly with the electrogenerated bromine, the concentration of amino acids can therefore be indirectly determined by continuously monitoring the reduction current of bromine. The signal monitored at the downstream electrode was largely dependent on the bromide concentration in the mobile phase. Under optimized conditions, the response linearly increased with the concentration for most of the amino acids over a concentration range of 1-100 microM, with a correlation coefficient of 0.990-0.993. The detection limits for most of the amino acids were below 1 microM (0.2 pmol). It was demonstrated that detection with a ring-disk electrode offers the advantages of achieving a much higher collection efficiency caused by a decrease in flow rate in the microcolumn LC.     

On-line coupling of flow injection displacement sorption preconcentration to high-performance liquid chromatography for speciation analysis of mercury in seafood

A simple and cost-effective method for speciation analysis of trace mercury in seafood was developed by on-line coupling flow injection microcolumn displacement sorption preconcentration to high-performance liquid chromatography (HPLC) with UV detection. The methodology involved the presorption of the Cu-PDC (pyrrolidine dithiocarbamate) chelate onto a microcolumn packed with a cigarette filter sorbent, simultaneous preconcentration of Hg(II), methylmercury (MeHg), ethylmercury (EtHg), and phenylmercury (PhHg) onto the microcolumn through a displacement reaction with the presorbed Cu-PDC, and their subsequent elution from the microcolumn for on-line HPLC separation. Interferences from heavy metal ions with lower stability of their PDC chelates relative to Cu-PDC were minimized without the need of any masking agents. With the consumption of 4.0 ml of sample solution, the enrichment factors were about 80. The detection limits were 10-25 ng g(-1) (as Hg) in fresh tissue. Precision (R.S.D. (%), n = 5) ranged from 2 to 3% at the 500 microg l(-1) (as Hg) level. The developed technique was validated by analyzing a certified reference material (DORM-2, dogfish-muscle), and was shown to be useful for mercury speciation in real seafood samples.     

A novel condition for capillary electrophoretic analysis of reductively aminated saccharides without removal of excess reagents

We have identified novel CE conditions for the separation of 7‐amino‐4‐methylcoumarin‐labeled monosaccharides and oligosaccharides from glycoproteins. Using a neutrally coated capillary and alkaline borate buffer containing hydroxypropylcellulose and ACN, saccharide derivatives form anionic borate complexes, which move from the cathode to the anode in an electric field and are detected near the anodic end. Excess labeling reagents and other fluorescent products remain at the cathodic end. Fluorimetric detection using an LED as a light source enables determination of monosaccharide derivatives with good linearity between at least 0.4 and 400 μM, may correspond to 140 amol to 140 fmol. The lower LOD (S/N = 5) is only 80 nM in the sample solution (ca. 28 amol). The results were comparable to reported values using fluorometric detection LC. The method was also applied to the analysis of oligosaccharides that were enzymatically released from glycoproteins. Fine resolution enables profiling of glycans in glycoproteins. The applicability of the method was examined by applying it to other derivatives labeled with nonacidic tags such as ethyl p‐aminobenzoate‐ and 2‐aminoacridone‐labeled saccharides.     

Structural analysis of oligosaccharides by a combination of electrospray mass spectrometry and bromine isotope tagging of reducing-end sugars with 2-amino-5-bromopyridine

Model reducing-end oligosaccharides were successfully labeled by a brominated aromatic amine reagent, 2-amino-5-bromopyridine (ABP), through reductive amination. Using either a combination of liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) with in-source fragmentation or liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS), sequence information corresponding to the model oligosaccharides was revealed with little ambiguity via the diagnostic unique twin peaks arising from the bromine isotopes, for both the molecular ions of the derivatized oligosaccharides and their fragments. No fragment ions arising from loss of the bromine atom were observed.     

Forward-scattering degenerate four-wave mixing as a potential laser-based absorption detection method in liquid separation systems: Coupling to conventional-size liquid chromatography

An explorative study on the compatibility of liquid separation systems, such as (micro) liquid chromatography (LC) and capillary electrophoresis (CE), and forward-scattering degenerate four-wave mixing (F-D4WM) as a detection method is presented. F-D4WM is a laser-based technique showing some analogy with holographic spectroscopy: a signal on a theoretical dark background is observed as a result of light absorption by an analyte. Parameters considered are solvent composition focussing on acetonitrile, methanol and water; mobile phases in LC and CE), detector cell construction, and influences of laser beam powers. A specially designed detector cell has been developed to meet the Brewster condition, both at the air-quartz and the quartz-liquid boundaries. For practical reasons, the tested cell has an optical pathlength of 1 mm; reduction to 100 μm is required to apply the cell in microseparations. The F-D4WM technique has been involved for detection in a conventional-size, reversed-phase LC separation of 1- and 2-aminoanthraquinones. The detection limit obtained (for the 1 mm cell) is 2 × 10⁻⁵ absorbance units. The experiments indicate that further reduction of background deserves explicit attention.     

Nonaqueous based microchip separation of toxic metal ions using 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol

The colorimetric metal chelating agent, 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol (5-Br-PAPS), was demonstrated on a capillary electrophoresis microchip in the separation and detection of six metal ions of environmental concern, Cd2+, Pb2+, Cu2+, Co2+, Ni2+, and Hg2+. The inclusion of methanol in the buffer was found to improve both the separation efficiency and sensitivity, in addition to making the technique directly amenable to the application of solid-phase extraction. The combination of metal chelation with solid-phase extraction on a C18 silica gel microcolumn gave several hundred fold improvements in detection limits for the CE microchip measurements of toxic metal ions in water and extracted from a solid Plexiglas surface.     

Analysis of 8-aminonaphthalene-1,3,6-trisulfonate-derivatized oligosaccharides by capillary electrophoresis-electrospray ionization quadrupole ion trap mass spectrometry.

Dextran was partially hydrolyzed with 0.1 mol/l HCl and the hydrolysate was derivatized with 8-aminonaphthalene-1,3,6-trisulfonate (ANTS) by reductive amination. The derivatized-oligosaccharide mixture was separated by capillary electrophoresis (CE) in a buffer of 1% HAc-NH4OH, pH 3.4, and the separated components were detected on-line by electrospray ionization quadrupole ion trap mass spectrometry (ESI-QIT-MS) in the negative ion mode. A mass accuracy lower than 0.01% could be achieved and as low as 1.6 pmol of detxran octaose could be detected. ANTS-derivatized dextran oligosaccharide with a degree of polymerization (DP) lower than 6 produced both [M-H]- and [M-2H]2- ions, whereas those with a DP of 6 or higher than 6 produced only [M-2H]2- ion. As 1< or =DP< or =6, the percentage of [M-2H]2- ion in the total ions of [M-H]- and [M-2H]2- was found to be a linear function of the logarithmic DP. Molecular mass determination with ESI-QIT-MS strengthens the power of CE analysis of oligosaccharides.