REACTIONS OF ORGANOCADMIUM REAGENTS WITH SULFONYL HALIDES II. ACTION OF ARENESULFONYL CHLORIDES ON SELECTED DIARYLCADMIUM COMPOUNDS

Abstract

The reaction of diarylcadmium compounds with arenesulfonyl chlorides was explored. Five different diarylcadmium reagnets, diphenylcadmium, di-p-tolylcadmium, di-α-naphthyl-cadmium, dibenzylcadmium and di-p-anisylcadmium, were selected to interact with benzene-or p-toluenesulfonyl chlorides. Unlike acid chlorides which react with these reagents to form ketones in high yields, the sulfonyl chlorides gave sulfones in moderate to poor yields. Beside the sulfones, sulfinic acids, biaryls, and haloarenes were obtained in moderate to good yields. Only di-p-anisylcadmium gave poor yield of p,p'-dianisyl.

Possible pathways are suggested and discussed.     

Aryl C-N bond formation by electrophilic amination of diarylcadmium reagents with O-substituted ketoximes

Diorganocadmium reagents cannot react with ketoxime at room temperature. CuCN catalysis allows diarylcadmium reagents to react with ketoxime and to give corresponding arylamines in good to high yields at room temperature. According to the electronic effects of the substituent attached to the aromatic ring, functionalized diarylcadmium reagents show meta-para selectivity in their amination reactions. Also compared to diarylzinc reagents, diarylcadmium reagents react with O-substituted ketoxime under milder reaction conditions and they form corresponding arylamines in higher yields. CuCN cannot help dialkyl-, dicycloalky-, and dibenzylcadmium reagents to react with ketoxime. Our Aryl C-N bond formation method does not include cadmium excretion into the environment.     

CHLORINATION OF AROMATIC HALIDES WITH CHLOROSULFONIC ACID

Abstract

Chlorosulfonic acid–iodine mixture has been shown to chlorinate a number of aromatic halides under mild conditions. In reaction with p-dichlorobenzene, the maximum yield (82%) of hexachlorobenzene required 5 mol of chlorosulfonic acid and 2.5 mol of iodine. The yield of product increased with the amount of iodine present. A mechanism of chlorination is proposed involving iodine-catalysed homolytic decomposition of the intermediate sulfonyl chlorides followed by heterolytic chlorination by the evolved iodine monochloride.

The reaction of o-, m-, and p-dichlorobenzenes with chlorosulfonic acid has been investigated. o-Dichlorobenzene at 100° gave a good yield (85%) of 3,4,3′,4′-tetrachlorodiphenylsulfone although m and p-dichlorobenzenes gave only the expected sulfonyl chlorides. This difference arises from the lack of steric hindrance in the p-position of o-dichlorobenzene leading to facile sulfone formation.

This was confirmed by the observation that 3,4-dichlorobenzenesulfonyl chloride undergoes the Friedel–Crafts reaction with o-dichlorobenzene to give 3,4,3′,4′-tetrachlorodiphenylsulfone (60%), but m- and p-dichlorobenzenes did not give any appreciable amounts of the corresponding sulfones under identical conditions.     

Phosphine-Free Suzuki Cross-Coupling Reaction Using an Efficient and Reusable Pd Catalyst in an Aqueous Medium Under Microwave Irradiation

Abstract

We report here an improved, highly efficient, and general method for the ligand-free Suzuki cross-coupling reaction to the synthesis of biaryls, bipyridyls, thienylpyridine, and allylphenols. Microwave irradiation of (het)aryl halides and (hetaryl, allyl)arylboronic acid N-methyl-iminodiacetic acid (MIDA) ester, using polyurea microencapsulated palladium catalyst (Pd EnCat 30), gave the coupling adducts 1a–x in excellent yields in just 10–18 min.     

Organic Reactions in Ionic Liquids: A New Method for the Synthesis of Alkyl Aryl Sulfones by Alkylation of Sodium Arenesulfinates with Unactivated Alkyl Chlorides

Abstract

A new method is reported for the synthesis of alkyl aryl sulfones by alkylation of sodium arenesulfinates with unactivated alkyl chlorides using ionic liquid based on 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BmimBF₄) mixed with water (2:1) as reaction media. The ionic liquid can be reused and the procedure gives the sulfones in moderate yields.     

Selective Oxidation of Sulfides to Sulfoxides/Sulfones by 30% Hydrogen Peroxide

Abstract

A selective and efficient procedure for the oxidation of various sulfides with sodium tungstate dihydrate with 30% hydrogen peroxide in the presence of trioctylmethylammonium dihydrogen phosphate, respectively, to the corresponding sulfoxides and sulfones is reported. The oxidation reaction is carried out at –5 to 0 °C in the presence of hydroxypropyl-β-cyclodextrins for sulfoxides or at 50–60 °C for sulfones. The mild reaction conditions, easy workup, and good yields of the products are the major advantages of this method.     

IMPROVED SYNTHESIS OF DIALKYLTHIOXAPHOSPHORANESULFENYL CHLORIDES AND BROMIDES

Abstract

Dialkylthioxaphosphoranesulfenyl chlorides and bromides can be conveniently prepared in the reaction of the corresponding thioamides with hydrogen chloride generated in situ with trimethylsilyl chloride and ethanol. Stability of the chlorides and bromides obtained by this method is high and the yields are quantitative.     

Sulfonated Condensed Polynuclear Aromatic (S-Copna) Resin Catalyzed Selective Oxidation of Sulfides to Sulfoxides or Sulfones Using Hydrogen Peroxide

Abstract

Sulfonated condensed polynuclear aromatic (S-COPNA) resin was found to be a highly efficient, environmentally friendly, recyclable heterogeneous catalyst for the oxidation of alkyl and aryl sulfides to the corresponding sulfoxides or sulfones, in good yields under mild reaction conditions using 30% hydrogen peroxide as an oxidant.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Synthesis of the S-COPNA resin catalyst. Spectroscopic data for compounds.     

MASS SPECTRA OF SELECTED SULFONES SULFONE-SULFINATE REARRANGEMENT

Abstract

Mass spectra of three sulfones selected to reveal certain structural features were obtained and interpreted. The mass spectra of the two isomeric sulfones, benzyl methyl sulfone and methyl p-tolyl sulfone, were quite different. The spectra showed that rearrangement of sulfones to the isomeric sulfinates occurs under the influence of the electron impact and that the migration of the aryl group is preferred over migration of the alkyl group.     

An Improved Synthesis of Vinyl- and β-Iodovinyl Sulfones by a Molecular Iodine-Mediated One-Pot Iodosulfonation-Dehydroiodination Reaction

An improved one-pot method to synthesize vinyl sulfones from unsaturated systems by using molecular iodine/sodium arenesulfinate/sodium acetate as reagents was described. Vinyl sulfones derived from styrene derivatives were generally obtained in good to excellent yields except for those bearing strong electron releasing substituent. Aliphatic alkenes and activated alkenes gave the corresponding vinyl sulfone products in moderate to good yields. Arylacetylenes yielded the respective β-iodovinyl sulfones in good yields while low yield was observed with aliphatic terminal alkyne. The potentials of the method entail simplicity, short reaction time, non-anhydrous reaction conditions, employing inexpensive, non-metallic reagent and integrating two reactions that are commonly accomplished separately into a single operation.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

SYNTHESIS AND CONFIGURATIONAL STUDIES OF ARYL CYCLOPROPYL SULFONES

Abstract

The cycloaddition of arylthiocarbenes to styrene gave stereospecifically cis?1-(arylthio)-2-phenylcyclopropanes, which were subsequently oxidized to the corresponding sulfones. The cyclopropanation of α,β-unsaturated sulfones with dimethylsulfonium methylide yielded stereoselectively trans?1-(arylsulfonyl)-2-arylcyclopropanes. The configurational assignments of these compounds have been arrived at on the basis of IR and PMR spectral data. Chemical shifts for ring protons and other substituents reveal that all the substituents tend to cause protons cis to them to appear at higher fields than those trans to them. This has been used as a criterion to distinguish between cis and trans aryl cyclopropyl sulfones.     

Metal-free synthesis of (E)-vinyl sulfones via denitrative coupling reactions of β-nitrostyrenes with sodium sulfinates

Abstract

A practical metal-free procedure for the synthesis of (E)-vinyl sulfones has been developed through the coupling of β-nitrostyrenes with sodium sulfinates under microwave irradiation. This methodology provides a convenient and efficient approach to various (E)-vinyl sulfones from readily available starting materials with excellent regioselectivity. The present oxidative reaction involves an efficient denitrative radical cross-coupling of β-nitrostyrenes with sodium sulfinates via using AcOH as an additive.     

Selective Oxidation of Sulfides to Sulfoxides and Sulfones Using n -Butyltriphenylphosphonium Dichromate (Bu n PPh3)2Cr2O7 in the Presence of Aluminium Chloride in Solution and Under Microwave Irradiation

A wide variety of sulfides are efficiently oxidized to their corresponding sulfoxides and sulfones in excellent yields using n-butyltriphenylphosphonium dichromate (BTPPDC) in the presence of aluminium chloride in acetonitrile solution and under microwave irradiation. In addition, selective oxidation of sulfides in the presence of functional groups such as a carbon–carbon double bond, ketone, oxime, aldehyde, ether, and acetal can be considered as a noteworthy advantage of this method.     

A synthesis of esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position from cyclobutanones with one-carbon ring-expansion

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from cyclobutanones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters, lithium enolate of carboxylic acid N,N-dimethylamides, or lithium α-carbanion of alkyl phenyl sulfones gave adducts in high yields. The adducts were treated with isopropylmagnesium chloride or ethylmagnesium chloride in dry toluene to give esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position in moderate to good yields with one-carbon ring-expansion via magnesium carbenoid 1,2-CC insertion reaction. The magnesium carbenoid 1,2-CC insertion reaction proved to be highly stereospecific. The reaction mechanism and origin of the specificity are described.     

Zirconium(IV) Chloride Catalyzed Synthesis of 2,3‐Unsaturated C,N, O,S, and Heteroaromatic Glycosylation in the Ferrier Rearrangement

Abstract

The reaction of tri‐O‐acetyl‐D‐glucal with nucleophiles to afford the corresponding 2,3‐unsaturated glycopyranosides in excellent yields by zirconium(IV) chloride in acetonitrile at ambient temperature has been demonstrated.     

HYDROCHLORINATION OF 2,3-ACETYLENIC ACIDS WITH THIONYL CHLORIDE IN DIMETHYLFORMAMIDE

ABSTRACT

The reaction of 2,3-acetylenic acids (1a–d) with thionyl chloride in DMF under mild conditions gave E,Z-3-chloro-2-alkenoic acids (2a–d) or esters (3a–d) depending on treating the reaction mixture with either water or alcohols.     

INDIUM-MEDIATED BARBIER REACTIONS OF AZIDES: A FACILE SYNTHESIS OF N-ALLYLAMINE DERIVATIVES

ABSTRACT

N-Allylic amines are conveniently prepared in high yields by the reaction of azides with allylindium reagents in the presence of sodium iodide in DMF at ambient temperature.     

Design and synthesis of some new thiophene and 1,3,4-thiadiazole based heterocycles

Abstract

The reaction of 3-oxopropanenitriles with phenyl isothiocyanate in DMF containing KOH afforded the corresponding potassium salts. The latter salts were converted into ketene N,S-acetals upon acidification with hydrogen chloride. The reaction of the ketene N,S-acetals with 2-bromo-1-[5-methyl-1-(p-tolyl)-1H-1,2,3-triazol-4-yl]ethan-1-one or 3-(2-bromoacetyl)-2H-chromen-2-one gave novel thiophenes in good yields. Treatment of the ketene N,S-acetals with hydrazonyl halides afforded 1,3,4-thiadiazoles in good yields. The stereochemistry of the synthesized compounds was studied.     

A CONVENIENT SYNTHESIS OF N-PHENYLSULFONYL-S-ARYL-S-CHLOROSULFOXIMINES

Abstract

N-Phenylsulfonyl-S-phenyl-S-chlorosulfoximine and N-phenylsulfonyl-S-(p-nitrophenyl)-S-chlorosulfoximine are prepared in 40–50% yields from corresponding disulfides, chlorine and N,N-dichlorobensenesulfonamide.

The suggested procedure is of advantage because it uses the stable and simply purified iminating reagent (N,N-dichlorobensenesulfonamide) and excludes the isolation of unstable reaction intermediates (sulfinyl chlorides).     

Selective synthesis of sulfoxides and sulfones by tantalum(V) catalyzed oxidation of sulfides with 30% hydrogen peroxide

The reaction of sulfides with 30% hydrogen peroxide catalyzed by tantalum(V) chloride in acetonitrile, i-propanol, or t-butanol selectively provided the corresponding sulfoxides in high yields. On the other hand, the reaction of sulfides with 30% hydrogen peroxide-catalyzed by tantalum(V) chloride or tantalum(V) ethoxide in methanol effectively gave the sulfones.