Lactonization of 5-Phenylfuran-4-arylcarbinol-3-carboxylic Acids under the Catalysis of Boron Trifluoridc Etherate

Manykindso贯naturalproductswhichhaveamoietyoflactoneringexhibitvariousbiologicalactlvltles,andsometuroturanllgnanstallIntothiscategoryl！nourcontinuousstudyofmrofuranllgnans,wehaverecentlydescribedaconvenientmethodforthesynthesiso贡5－phenyl－4－aroylfuran－3－carboxyllcacidsl－．Toaccomplishthesynthesisof在heanalogof山elactoneH9＂ans,山ehydroxyacids2,whichwereobtainedInexcel！entyieldso笆approximationgi％fromthereductionofketoacidslInaqueousalkalinesolutionsofNaBH。（reflux,4h）,mustb…     

基于Barton-Zard反应的2-乙氧羰基-3-三氟甲基-4-甲基吡咯及其卟啉衍生物的改进合成

由2-乙氧羰基-3-硝基-1,1,1-三氟丁烷(1b)与异氰基乙酸乙酯发生Barton-Zard反应制备2-乙氧羰基-3-三氟甲基-4-甲基吡咯(1)的过程中,分别用K2CO3和乙醇代替有机碱1,8-二氮杂二环[5.4.0]十一碳-7-烯(DBU)和四氢呋喃溶剂,这种改进的Barton-Zard方法具有操作简便、试剂价廉易得、溶剂毒性低和产率更高等优点。 另外,在3-硝基-1,1,1-三氟-2-丁醇(1a)通过乙酰化反应转变为中间体1b的过程中,用沸腾温度下的甲苯溶液与乙酰氯代替浓硫酸催化下的酸酐反应体系;合成化合物1b的最优化的反应条件被确定为：乙酰氯与反应物1a之间的摩尔比为1.2∶1,反应时间为3～3.5 h。 又根据改进的卟啉合成法,在低温下用过量氢化铝锂还原吡咯1,将还原所得的尚未干燥或储存的粗产物α-羟甲基-三氟甲基-4-甲基吡咯(1c),立即在未经处理的三氯甲烷溶剂中,以三氟化硼·乙醚(BF3·OEt2)为催化剂进行四聚化反应,然后用2,3-二氯-5,6-二氰基-1,4-苯醌(DDQ)氧化,合成出含三氟甲基取代的卟啉衍生物2。 研究发现,由化合物1c制备产物2时,用BF3·OEt2取代p-TsOH作为催化剂,在确定的反应条件下,能够将产物2的收率由14%提高至50%。     

Silicon—nitrogen bond cleavage in N-(dimethylimidosilylmethyl)imides and dimethyl(lactamomethyl)aminosilanes with BF3 etherate as an alternative route to N-(dimethylf luorosilylmethyl)imides and related compounds

N-(Dimethylfluorosilylmethyl)succinimide (2a) and N-(dimethylfluorosilylmethyl)phthalimide (2b) were synthesized by the Si—N bond cleavage in readily accessible N-(dimethylimidosilylmethyl)imides with BF₃ etherate. Analogously, (O→Si)-chelated 1-(dimethylfluorosilylmethyl)-2-pyrrolidone was prepared from 1-(dimethylmorpholinosilylmethyl)-2-pyrrolidone. X-ray diffraction study demonstrated that the silicon atom in the crystals of 2b is pentacoordinated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 558–561, March, 2006.     

Electrosyntheses of high‐quality freestanding poly(fluorene‐co‐3‐methylthiophene) films with tunable fluorescence properties

The copolymerization of 3‐methylthiophene (MeT) and fluorene (FE) was successfully achieved in boron trifluoride diethyl etherate by the direct anodic oxidation of the monomer mixtures on a platinum electrode. The optimal feed ratio together with the best suitable potential for their copolymerization was determined. The as‐formed copolymer films, which were copolymerized with a feed ratio of FE/MeT = 2:1 at a constant potential of 1.3 V (vs a saturated calomel electrode), had the advantages of both poly(3‐methylthiophene) and polyfluorene, such as good electrochemical behavior, high conductivity, excellent thermal stability, and high film quality. The structure of the copolymer was investigated with ultraviolet–visible, infrared spectroscopy, and thermal analysis. Fluorescence spectroscopy studies revealed that the dedoped copolymer film in the solid state was a good blue‐light emitter with a strong emission at 435 nm and a shoulder at 459 nm. The emitting properties of the copolymer could be tuned by parameters during the electrochemical polymerization, such as the applied potential and monomer feed ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4904–4915, 2006     

Selective Oxidation of Sulfides to Sulfoxides and Sulfones Using n -Butyltriphenylphosphonium Dichromate (Bu n PPh3)2Cr2O7 in the Presence of Aluminium Chloride in Solution and Under Microwave Irradiation

A wide variety of sulfides are efficiently oxidized to their corresponding sulfoxides and sulfones in excellent yields using n-butyltriphenylphosphonium dichromate (BTPPDC) in the presence of aluminium chloride in acetonitrile solution and under microwave irradiation. In addition, selective oxidation of sulfides in the presence of functional groups such as a carbon–carbon double bond, ketone, oxime, aldehyde, ether, and acetal can be considered as a noteworthy advantage of this method.     

Low potential electrochemical polymerization of diphenyl ether and characterization of its polymers

High‐quality poly(diphenyl ether) (PDPE) films with electrical conductivity of 4.4 × 10^?1 S cm^?1 were synthesized electrochemically by direct anodic oxidation of diphenyl ether (DPE) in boron trifluoride diethyl etherate (BFEE) containing 5% concentrated sulfuric acid (SA) (by volume). The oxidation potential onset of DPE in pure BFEE was measured to be only 1.37 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile + 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.98 V vs. SCE). The addition of SA to BFEE can further decrease the oxidation potential onset of the monomer to 1.18 V versus SCE in the mixed electrolyte of BFEE + 5% SA. PDPE films obtained from this medium showed good redox activity and stability even in concentrated SA. Dedoped PDPE films were partly soluble in the strong polar organic solvent dimethyl sulfoxide. Fluorescent spectral studies indicated that soluble PDPE was a good blue‐light emitter with a quantum yield of 0.30. Infrared spectroscopy and quantum chemistry calculations indicated that the electropolymerization of DPE occurred mainly at C₄ and C_4′. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5932–5941, 2007     

Selective Oxidation of Sulfides to Sulfones Using H2O2 and Anderson-Type Hexamolybdochromate(III) as Catalyst

An Anderson-type hexamolybdochromate(III) is found to be an effective catalyst for the selective oxidation of sulfides to their corresponding sulfones. The reaction was carried out in 60% aq. acetonitrile (v/v) using 30% H₂O₂ at 60°C. Various dialkyl, alkyl-aryl, and diaryl sulfides were selectively oxidized, giving high yields of sulfones after a simple workup procedure.     

Titanium–salan‐catalyzed asymmetric sulfoxidations with H2O2: design of more versatile catalysts

Titanium–salan complexes with 3,3’‐diphenyl substituents in the salicylidene rings of the salan ligand are efficient sulfoxidation catalysts, capable of catalyzing the asymmetric oxidation of bulky aryl benzyl sulfides with H₂O₂ with good to high enantioselectivities. In this paper, substituent effects on titanium‐salan‐catalyzed enantioselective oxidation of sulfides to sulfoxides have been systematically investigated. Titanium–salan catalysts with halogen substituents at the 5,5’‐positions (3,3’‐H₂dihydrogen substituted) have been found to catalyze the oxidation of both bulky aryl benzyl sulfides and small alkyl phenyl sulfides with good to high enantioselectivities. Kinetic data witness a direct attack of the sulfide to the electrophilic active oxygen species; a consistent reaction mechanism is proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of Co (II) and Fe (III) Schiff base complexes grafted onto mesoporous MCM-41: A heterogeneous and recyclable nanocatalysts for the selective oxidation of sulfides and oxidative coupling of thiols

Novel organic–inorganic hybrid heterogeneous catalysts containing cobalt(II) and iron(III) Schiff base complexes, grafted on the internal surface of MCM-41 pores were prepared by introducing a metal salt into a mesoporous silica functionalized with a Schiff base ligand. The chemical and physical properties of the catalysts were investigated by BET, TGA, XRD, FT-IR, and TEM techniques. These complexes were found to be efficient, selective catalysts for the oxidation of various sulfides to sulfoxides and oxidative coupling of thiols to their corresponding disulfides with urea hydrogen peroxide in excellent yield at room temperature. The designed catalytic system prevents effectively the overoxidation of sulfides and thiols to sulfoxides and sulfones, respectively. Also the heterogeneous catalysts can be recovered easily and reused many times without significant loss of activity and selectivity.     

非晶态NiP（B）／Al2O3催化一氧化碳，水和氧气合成过氧化氢

Hydrogenperoxideisagreenoxidantwithgreatpotentialformuchapplication .Thepresentproduc tionofhydrogen peroxiderequiressevereconditionsand generates pollutants .AlternativesynthesesarerequiredandthesynthesisofH2 O2 fromCO ,H2 OandO2 isverypromising .AsshowninEq(1) ,thesynthesisisthermodynamicallyfavored :CO +H2 O +O2 H2 O2 +CO2 (1)ΔG02 98=- 134kJ/mol　　ThereactionwasfirstreportedbyZudinetal[1]whousedpalladiumtriphenylphosphaneasacatalyst.Bianchietal[2 ] usedabiphasesystemforthesynthe …     

Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

ChemInform Abstract: Equilibrium Structure and Torsional Barrier of BH3NH3.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

ChemInform Abstract: Theoretical ab initio Study of Neutral and Charged B3Hn (n = 3-9) Species. Importance of Aromaticity in Determining the Structural Preferences

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Molecular and crystal structure of 1,2-dihydro-3H-1,3,4-benzotriazepines

Three novel 1,2-dihydro-3H-1,3,4-benzotriazepines have been synthesized: 7-bromo-5-phenyl-3-phenylcarbamoyl-1,2-dihydro-3H-1,3,4-benzotriazepin-2-one, 7-bromo-5-phenyl-1,2-dihydro-3H-1,3,4-benzotriazepin-2-thione, and 7-methyl-5-phenyl-1,2-dihydro-3H-1,3,4-benzotriazepin-2-one. Their crystal structures have been determined using X-ray analysis. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1048–1056, July, 2006.     

Boron Hydrogen Compounds: Hydrogen Storage and Battery Applications

About 25 years ago, Bogdanovic and Schwickardi (B. Bogdanovic, M. Schwickardi: J. Alloys Compd. 1–9, 253 (1997) discovered the catalyzed release of hydrogen from NaAlH₄. This discovery stimulated a vast research effort on light hydrides as hydrogen storage materials, in particular boron hydrogen compounds. Mg(BH₄)₂, with a hydrogen content of 14.9 wt %, has been extensively studied, and recent results shed new light on intermediate species formed during dehydrogenation. The chemistry of B₃H₈⁻, which is an important intermediate between BH₄⁻ and B₁₂H₁₂²⁻, is presented in detail. The discovery of high ionic conductivity in the high-temperature phases of LiBH₄ and Na₂B₁₂H₁₂ opened a new research direction. The high chemical and electrochemical stability of closo-hydroborates has stimulated new research for their applications in batteries. Very recently, an all-solid-state 4 V Na battery prototype using a Na₄(CB₁₁H₁₂)₂(B₁₂H₁₂) solid electrolyte has been demonstrated. In this review, we present the current knowledge of possible reaction pathways involved in the successive hydrogen release reactions from BH₄⁻ to B₁₂H₁₂²⁻, and a discussion of relevant necessary properties for high-ionic-conduction materials.