A STUDY OF THE PHOTOPHYSICAL AND PHOTOCHEMICAL PROPERTIES OF THE S8 MOLECULE The Quenching of Benzene,Naphthalene and Pyrene Fluorescence by S8 Molecules in S8 + Liquid Methanol System. I

Abstract

The energy of the first excited singlet state S₁ of S₈ is estimated as 89 ± 3 kcal · mole^?1. S₈ does not exhibit fluorescence, but quenches the fluorescence of certain sensitizers (benzene, naphthalene, pyrene) acting as an energy acceptor in the energy transfer process from the S₁ state of the sensitizer. The process of the quenching of donor fluorescence by S₈ was analysed using the Stern–Volmer equation.     

STRUCTURE OF OXIDIZED DISULFIDE BONDS AS CALCULATED BY THE CNDO/2 METHOD

Abstract

ONDO/2 calculations indicate that disulfide cation radicals, e.g. HSSH⁺ and CH₃SSCH₃ ⁺, have a trans-planar structure in contrast to the twisted structure of the parent molecule. The main reason for this difference is the removal of an electron from the sulfur lone-pair orbitals. The bond energy in the disulfide cation radical is much lower than in the parent molecule, which makes the reaction CH₃SSCH₃ ⁺ → CH₃S→ + CH₃S⁺ allowed, as observed previously in radiolysis of CH₃SSCH₃ single crystals.     

KINETICS AND MECHANISTIC ASPECTS OF THE HYDROLYSIS REACTION OF CYCLIC PHOSPHONODITHOITES

Abstract

The hydrolysis of the cyclic phosphonodithioite C₆H₅ P(SCH(CO₂CH₂CH₃CH(CO₂CH₂CH₃)S) in aqueous acetonitrile follows a rate law that is first order in the concentration of C₆H₅ P(SCH(CO₂CH₂CH₃)CH(CO₂CH₂CH₃)S), and independent of the water concentration. The values of E_a , ΔH* and ΔS* are 10.4 k cal mol^?1, 9.6 k cal mol^?1 and -45 cal mol^?1 respectively. The isotope effect for D₂O as compared to H₂O is 2.5. A mechanism is proposed whereby a pre-equilibrium is established between the phosphonodithioite and water, with a subsequent proton transfer from water to the tricoordinate phosphorus occurring in a subsequent step. The slow step involves hydrolytic cleavage of the first phosphorus-sulfur bond. The compound 2-nitro-5-thiocyanatobenzoic acid is used to provide supporting evidence for the formation of an intermediate thiol.     

KINETICS OF THE REACTION OF SULFIMIDES WITH POTASSIUM HYDROXIDE IN METHANOL

Abstract

The reaction of sulfimides with hydroxide ion in methanol gave the corresponding sulfoxide (the solvolysis product) and/or the corresponding α-methoxysulfide (the Pummerer type product). The pseudo first order rates for the solvolysis reaction and the Pummerer type reaction were determined using a large excess of potassium hydroxide. The rates of the solvolyses are correlated with [sgrave] values and the values of ρ _X = +1.2 and ρ _Y = +0.8 were obtained for aryl methyl N-aryl-sulfonylsulfimides (p-XC₆H₄S(NSO₂C₆H₄Y-p)CH₃), and both the activation enthalpy and entropy calculated are δH≠ = 18.8 kcal mol^?1 and δS≠ = –23.9 e.u. (PhS(NSO₂C₆H₄CH₃-p)CH₃), respectively. Hammett correlation with [sgrave] values for the Pummerer type reaction gave ρz = +2.0 for N-aryl-sulfonyltetramethylenesulfimides ((CH₂)₄SNSO₂C₆H₄Z-p), and the activation enthalpy and entropy are δH≠ = 27.9 kcal mol^?1 and δS≠ = +13.3 eu ((CH₂)₄SNSO₂C₆H₄CH₃-p), respectively. All these observations suggest that the solvolysis reaction proceeds via the initial nucleophilic attack of hydroxide ion on the sulfur atom of the sulfimide namely via an S _N 2 process at the sulfur atom whereas the Pummerer type reaction proceeds by way of the E 1cb mechanism.     

ON THE REARRANGEMENT OF N-ARYL SULFIMIDES

Abstract

N-Aryl-S,S-dialkylsulfimides, 1, with R¹ = alkyl other than CH₃, have been rearranged by heating in ethanol yielding o-alkylthiomethyl-anilines, 2, as main products. Isomeric o-methylthioalkyl-anilines, 14, are formed in minor amounts only. Reactions of sulfimides, 1, with R¹ = CH₃, with certain alkylating or acylating agents yielded o-methylthiomethylated, N-alkylated or -acylated products 9. Mechanistic considerations are discussed. The rearrangement of sulfimides 1 has been assumed to occur via [2,3]-sigmatropic reactions of intermediate azasulfonium ylids 3. Attempts to resolve (+)-camphor-10-sulfonates of N-aryl sulfimides failed, but optically active N-aryl sulfimides could be obtained by reaction of anilines with optically active sulfoxides and P₄O₁₀. Optically active 2,6-disubstituted sulfimides, 1, could be rearranged in ethanolic KOH to yield optically active cyclohexadienimines 12, indicating a transfer of asymmetry from sulfur to carbon and supporting the assumption of a sigmatropic rearrangement.     

PREPARATION AND CHARACTERIZATION OF CLUSTERS CONTAINING THE CoMRuS (M=Mo OR W) CORE

Abstract

The reaction of (μ₃-S)RuCo₂(CO)₉ with functionally substituted cyclopentadienyl tricarbonyl metal anions M(CO)₃(C₅H₄C(O)R) (M = Mo, W; R = OEt, CH₂CH₂COOMe) in THF under reflux gave new chiral skeleton clusters (μ₃-S)RuCoM(CO)₈(C₅H₄C(O)R) [M = Mo, R = OEt (1); M = W, R = OEt (2); M = Mo, R = CH₂CH₂COOMe (3); M = W, R = CH₂CH₂COOMe (4)]. These complexes were characterized by elemental analysis, IR and ¹H NMR spectra. The molecular structure of compound (1) was determined by single-crystal X-ray diffraction methods.     

THE CHEMISTRY OF HETEROARYLPHOSPHORUS COMPOUNDS. PART XII.1 THE DIFFERENTIAL-PULSE POLAROGRAPHIC REDUCTION OF HETEROARYL-AND HETEROARYLMETHYLPHOSPHONIUM SALTS

Abstract

The polarographic reduction of series of heteroaryl- and heteroarylmethylphosphonium salts has been studied using a differential pulse polarographic technique, this having a number of advantages over classical dc polarography. For the salts Ar₃P⁺CH₂PhBr^-, the observed order of ease of reduction correlates with the electron-withdrawing ability of the heteroaryl group (i.e. Ar = 2-furyl > 2-thienyl > phenyl > 1-methylpyrrol-2-yl). In contrast, for the salts Ph₃P⁺CH₂ArBr^- (Ar = 2-furyl, 2-thienyl, phenyl, 1-methylpyrrol-2-yl, 3-thienyl and 3-furyl), the ease of reduction correlates best with the order of stability of the forming carbanions as established in earlier studies of the alkaline hydrolysis of these salts.     

Hierarchical Nanoflower Arrays of Co9S8-Ni3S2 on Nickel Foam: A Highly Efficient Binder-Free Electrocatalyst for Overall Water Splitting

Hydrogen production is vital for meeting future energy demands and managing environmental sustainability. Electrolysis of water is considered as the suitable method for H₂ generation in a carbon-free pathway. Herein, the synthesis of highly efficient Co₉S₈-Ni₃S₂ based hierarchical nanoflower arrays on nickel foam (NF) is explored through the one-pot hydrothermal method (Co₉S₈-Ni₃S₂/NF) for overall water splitting applications. The nanoflower arrays are self-supported on the NF without any binder, possessing the required porosity and structural characteristics. The obtained Co₉S₈-Ni₃S₂/NF displays high hydrogen evolution reaction (HER), as well as oxygen evolution reaction (OER), activities in 1 m KOH solution. The overpotentials exhibited by this system at 25 mA cm⁻² are nearly 277 and 102 mV for HER and OER, respectively, in 1 m KOH solution. Subsequently, the overall water splitting was performed in 1 m KOH solution by employing Co₉S₈-Ni₃S₂/NF as both the anode and cathode, where the system required only 1.49, 1.60, and 1.69 V to deliver the current densities of 10, 25, and 50 mA cm⁻², respectively. Comparison of the activity of Co₉S₈-Ni₃S₂/NF with the state-of-the-art Pt/C and RuO₂ coated on NF displays an enhanced performance for Co₉S₈-Ni₃S₂/NF both in the half-cell as well as in the full cell, emphasizing the significance of the present work. The post analysis of the material after water electrolysis confirms that the surface Co(OH)₂ formed during the course of the reaction serves as the favorable active sites. Overall, the activity modulation achieved in the present case is attributed to the presence of the open-pore morphology of the as formed nanoflowers of Co₉S₈-Ni₃S₂ on NF and the simultaneous presence of the surface Co(OH)₂ along with the highly conducting Co₉S₈-Ni₃S₂ core, which facilitates the adsorption of the reactants and subsequently its conversion into the gaseous products during water electrolysis.     

STRUCTURE,STEREOCHEMISTRY, AND MECHANISM OF FORMATION OF N-ACYLSULFILIMINES

Abstract

The methods for the preparation of sulfilimines are summarized, and the stereochemistry and electronic structure of N-acylsulfilmines are discussed. Sulfilimines have a non-planar structure, but the S^IV[sbnd]N bond character cannot be determined from their resolvability. N-Sulfonylsulfilimines (RR'SNSO₂Q) contain a delocalized S^IVNS^VI d bond system, the S^IVN and S^VIn bonds are of intermediate bond order. S^IV[sbnd]CH₃ hyperconjugation causes strong bond shortening. An asymmetric conformation of a sulfilimine containing two identical S^IV substituents was found in the crystalline state which could be accounted for theoretically. The rotation of the SN bond is not restricted in solution. The structure of N-carboacylsulfilimines (RR'SNCOQ) is strongly polar due to the strong NCO conjugation, and the instability of these compounds can be ascribed to the polar structure. The reaction between thioethers and chloramine-T is a nucleophilic substitution; the rate of the reaction is influenced by the nucleophilic character of the thioether sulfur atom. Thioether carboxylic acids are usually oxidized by chloramine-T and only give a sulfilimine if the carboxyl group is fixed sufficiently distant from the sulfur atom. The formation of sulfilimines from an optically active sulfoxide by the action of a sulfonamide (or N-sulfinylsulfonamide) proceeds via a trigonal bipyramidal intermediate with complete inversion. The intermediate of the sulfilimine synthesis starting from arylsulfonyl azides is a sulfonyl imene.     

Phase-Transfer Catalysis: Free-Radical Polymerization of Methyl Methacrylate using K2S2O8-Quaternary Ammonium Salt Catalyst System. A Kinetic Study

Abstract

The kinetics of phase-transfer-agent-assisted free-radical polymerization of methyl methacrylate using K₂S₂O₈ as the water-soluble initiator and triethylbenzylammonium chloride (TEBA) as the phase-transfer catalyst (PTC) was investigated in toluene-water biphase media at 60°C. The effect of varying [MMA], [K₂S₂O₈], [TEBA], [H⁺], the ionic strength of the medium, and the temperature on the rate of polymerization (R _p) was studied. R _p was found to be proportional to [MMA]², [K₂S₂O₈]¹, and [TEBA]^0.5. Based on the kinetic results, a mechanism involving initiation of polymerization by phase-transferred S₂O₈ ^2- and termination by Q⁺ (quaternary ammonium ion) is proposed.     

SOME REACTIONS OF ALIPHATIC AMIDES WITH SULFUR AND SODIUM POLYSULFIDES

Abstract

Some reactions of the aliphatic amides, CH₃CONH₂, CH₃CONHCH₃, CH₃CON(CH₃)₂ and CH₃CON(C₂H₅)₂ with elemental S and sodium sulfides, Na₂S _n , n ≥ 1, have been studied. The initial reaction product with elemental sulfur appears to be a substituted polysulfane, CH₃COS _n NR, formed by the insertion of the sulfur chain into the C[sbnd]N bond. This product decomposes on further heating, forming COS as the major gas product. In solutions of Na₂S _n in the amides, the reactive material appears to be elemental S, present in equilibrium with S _n ^?2. In the N-dialkyl substituted amides, CH₃CON(CH₃)₂ and CH₃CON(C₂H₅)₂, the tetrasulfide is uniquely stabilized by solvent coordination so that solutions of Na₂S₄ in these amides are stable for long periods of time at 130°C.     

Cyclization of N-alkyldithiocarbamates in alkaline media,a counter example of well-known chemistry – an experimental and theoretical study

In strong alkaline media, the reaction of 2-(tert-butylamino)ethanol (3: R?=?Bu^t) with CS₂ at 0°C produced a cyclic dithiocarbamate, 3-tert-butylthiazolidine-2-thione (1: R?=?Bu^t), rather than alkaline metal or ammonium salts of [S₂CN(Bu^t)CH₂CH₂OH]^?. This is in contrast to isolation of stable alkaline metal or ammonium salts of [S₂CN(R)CH₂CH₂OH]^? (R?=?Me, Et, Pr, or CH₂CH₂OH) obtained in analogous reactions. The use of Ni(OAc)₂, both as a source of Ni(II) and a weaker base, in a one-pot reaction with (3: R?=?Bu^t) and CS₂, successfully gave the first reported metal complex of [S₂CN(Bu^t)CH₂CH₂OH]^?, namely [Ni{S₂CN(Bu^t)CH₂CH₂OH}₂] (2: R?=?Bu^t). Compounds 1 and 2 have been fully characterized by infrared and NMR spectroscopies, and by X-ray crystallography. DFT calculations on the cyclization and stabilities of [S₂CN(R)CH₂CH₂OH]^? (R?=?Pr and Bu^t) have been carried out.     

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9S8/Co3S4/Cu2S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co₉S₈/Co₃S₄/Cu₂S nanoparticle in which Co₃S₄ germinates between Co₉S₈ and Cu₂S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co₉S₈ and Cu₂S tends to trigger the interface phase transition of Co₉S₈, leading to Co₃S₄ interlayer due to the low formation energy of Co₃S₄/Cu₂S (−7.61 eV) than Co₉S₈/Cu₂S (−5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×10¹⁴ to 2.09×10¹⁵ cm⁻³), and creates more active sites. Compared to Co₉S₈ and Cu₂S, the Co₉S₈/Co₃S₄/Cu₂S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co₉S₈/Co₃S₄/Cu₂S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm⁻² under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.     

Reaktionen von Zinnchloriden mit Polysulfiden. Die Kristallstrukturen von (PPh4)2[SnCl2(S6)2], (PPh4)2[Sn4Cl4S5(S3)O] und (PPh4)2[SnCl6] · S8 · 2CH3CN

Reaction of Tin Chlorides with Polysulfides. Crystal Structures of (PPh₄)₂[SnCl₂(S₆)₂], (PPh₄)₂[Sn₄Cl₄S₅(S₃)O], and (PPh₄)₂[SnCl₆] · S₈ · 2CH₃CN . The reaction of PPh₄[SnCl₃] with Na₂S₄ in acetonitrile in the presence of small amounts of water yields (PPh₄)₂[Sn₄Cl₄S₅(S₃)O] and minor amounts of (PPh₄)₂[SnCl₂(S₆)₂], PPh₄Cl · 2S₈ and (PPh₄)₂[SnCl₆]. SnCl₄ is partially reduced by (PPh₄)₂S_x, PPh₄[SnCl₃] and (PPh₄)₂[SnCl₆] · S₈ · 2CH₃CN being produced. According to the X-ray crystal structure determination the [Sn₄Cl₄S₅(S₃)O]^2?-ion consists of an O atom that is coordinated by four Sn atoms which in turn are liked with one another by five single S atoms and one S₃ group. In the [SnCl₂(S₆)₂]^2?-ion the Sn atom is octahedrally coordinated by two Cl atoms in trans arrangement and by two chelating S₆ groups. Octahedral [SnCl₆]^2? ions and S₈ molecules in the crown conformation are present in (PPh₄)₄[SnCl₆] · S₈ · 2CH₃CN.     

RADICAL IONS 561,2 ONE-ELECTRON OXIDATION OF 1,2-DITHIETE DERIVATIVES

Abstract

Novel 1,2-dithiete derivatives R₂C₂S₂ with R = [sbnd]C(CH₃)₃ and [sbnd]C(CH₃)₂[sbnd]CH₂[sbnd]CH₂[sbnd]CH₂[sbnd]C(CH₃)₂[sbnd] are readily oxidized by the one-electron transfer system AlCl₃/H₂CCl₂ to their radical cations. The single line ESR spectra, on high amplification, exhibit ³³S satellites in natural abundance. Both the ESR data, i.e. rather large g values and ³³S hyperfine coupling constants as well as MNDO closed and open shell calculations for the parent molecule H₂C₂S₂ illustrate that spin and positive charge are predominantly located in the SS bridge of the four-membered ring.     

A bi-butterfly W-Cu-S cluster compound:Synthesis and crystal structure of(n-Bu_4N)_2[W_2Cu_4S_8(S_2CNC_4H_8)_2]

The compound(n-Bu_4N)_2[W_2Cu_4S_8(S_2CNC_4H_8)_2]was obtained by the reaction of Bu_4NBr,(NH_4)_2WS_4,NaS_2NCC_4H_8 and CuCl in CH_3CN and CH_3OH.It crystallizes in the monoclinicspace group P2_1/c with unit cell parameters:a=21.875(5),b=16.843(4),c=17.745(5),β=101.69(6)°,V=6402(6)~3,Z=4,D_o=1.718 g·cm~(-3).The final R and R_w values converged to 0.055and 0.060 respectively.The structure consists of two‘butterfly’units[WS_4Cu_2]linked togetherby two weak Cu—S bonds and two bridging S_2CNC_4H_8 ligands.Infrared spectra gave charac-teristic absorptions at 495 cm~(-1) for W=S and 450,435,412 cm~(-1) for W—μ-S.     

Reactions of S4N4 with diphosphines,Ph2P(X)PPh2 (X = NC4H8N,CH2CH2)

Reactions of S₄N₄ with diphosphines, Ph₂P(X)PPh₂ (X = NC₄H₈N, CH₂CH₂) have resulted in the isolation of N₃S₃? NPPh₂(X)Ph₂PN? S₃N₃ (X = NC₄H₈N, CH₂CH₂), (S)PPh₂(CH₂CH₂)Ph₂PN? S₃N₃, and (S)PPh₂NC₄H₈NPh₂P(S) as new compounds. These heterocycles have been characterized by analytical and spectroscopic (IR, UV-VIS, ¹H and ³¹P-NMR, and MS) techniques.     

SYNTHESIS AND PHOTOPHYSICAL PROPERTIES OF POLYMER-BOUND HEXANUCLEAR MOLYBDENUM CLUSTERS

Abstract

The coordination of [Mo₆Cl₈ ⁱ(SO₃CF₃)₆ ^a]^2? (1) and [Mo₆Cl₈ ⁱCl₄ ^a(EtOH)₂ ^a] (2) to poly(evinylpyridine) (PVP) produces crosslinked materials. Formation of these materials occurs by displacement of axial ligands ((a) in Fig. 1) SO₃CF₃ ^? or EtOH on the clusters by the vinylpyridine moieties. The availability of six coordination sites in 1 and two coordination sites in 2 offers control over the degree of crosslinking and solubility of the materials. Similarly, varying the ratio of cluster coordination sites (C) to polymer-pendant pyridine ligands (P) yields materials with a wide range of solubilities and glass transition temperatures (T_g). Materials with C:P ratios of 1:100 are highly soluble in CH₂Cl₂ and MeOH, with T_g values slightly higher than that of pure PVP. Unswellable materials with no discernible T_g are obtained with C:P ratios of 1:5 and lower, indicating a high degree of crosslinks. Transient emission spectroscopy reveals that polymer-bound cluster 1 lacks the luminescent properties characteristic of many [Mo₆Cl₈]⁴⁺ based clusters. Conversely, polymer-bound cluster 2 displays intense luminescence and retains the unusually long-lived excited-state observed for the free clusters in solution. The emission lifetime of PVP-bound 2 fits a biexponential decay, with τl₁ = 90 μs (60 %) and τ₂ = 8 μs (40 %), while [Mo₆Cl₈ ⁱCl₆ ^a]^2? has a uniexponential decay of τ = 156 μs in CH₂Cl₂ solution.     

MIXED HALIDE DIALKYL AND ALKYLENEDITHIOPHOSPHATE DERIVATIVES OF RUTHENIUM (III)

Abstract

Mixed chloride dialkyl and alkylenedithiophosphates of ruthenium (III). RuC1_3-n|(S₂P(OR)₂|n (R = Prⁿ, and Ph) and RuCl_3-n,[S₂ POGO]n G =-CMe₂CMe₂,- CH₂CMe₂CH₂-, -CH₂CEt₂CH₂-. and -CMe₂CH₂CHMe-, n = 1,2 have been synthesized for the first time by the reactions of ruthenium trichloride with ammonium dialkyl and alkylenedithiophosphate or alternatively by disproportionation reactions of ruthenium trichloride with ruthenium tris(dialkyl and alkylenedithiophosphates) in different stoichiometric ratios in benzene.

These new complexes have been characterized by elemental analysis, molecular weight determinations, as well as IR and NMR (¹H and ³¹P) data. Chelated structures with bidentate dialkyl and alkylenedithiophosphates groups have been proposed for all these derivatives.