Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Relativistic coupled cluster calculations of the electronic structure of KrH<Superscript>+</Superscript>, XeH<Superscript>+</Superscript> and RnH<Superscript>+</Superscript>

Potential energy curves of NgH⁺ cations (Ng = Kr, Xe, Rn) were obtained by using four-component relativistic CCSD(T) coupled cluster calculations. Dissociation energies, equilibrium bond lengths, electronic properties, such as dipole moments and electric field gradients at the nuclei, and the related spectroscopic parameters of the electronic ground state have been determined. The results obtained for KrH⁺ and XeH⁺ are in good agreement with available experimental data, while those for RnH⁺ have been determined for the first time at this level of theory.     

<Superscript>13</Superscript>C-labeled bilirubin: synthesis of 3<Superscript>1</Superscript>(3<Superscript>2</Superscript>),17<Superscript>1</Superscript>(17<Superscript>2</Superscript>)-di-[<Superscript>13</Superscript>C]-mesobilirubin-XIIIα

Abstract  The title compound, labeled with ¹³C in the ethyl groups was synthesized from K¹³CN and low-molecular-weight components. The synthetic relay compound was 3¹(3²)[¹³C]-xanthobilirubinic acid methyl ester in a synthetic route that leads to a label in the ethyl β-substituent of a dipyrrinone model for bilirubin. This labeled dipyrrinone was oxidatively coupled to the dimethyl ester of mesobiliverdin-XIIIα, thereby providing a route to a ¹³C-labeled mesobiliverdin and mesobilirubin, with one carbon of each ethyl being 98% ¹³C-enriched. Graphical Abstract        

The effect of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> and OH<Superscript>−</Superscript> ions on the laser ablation of Cs<Superscript>+</Superscript> ion on Type 304 stainless steel

Type 304 stainless steel specimens artificially contaminated with CsCl solution were treated with KOH solution and KNO₃ solution, respectively. Cs⁺ ion removal tests by a Q-switched Nd:YAG laser at 1064 nm at a given fluence of 57.3 J/cm² were performed. The surface morphology and the relative atomic mole ratio of the specimen surface were investigated by SEM and EPMA. The order of Cs⁺ ion removal efficiency of laser was no-treatment < KOH < KNO₃ during the 42 shots. From the investigation of XPS peaks around 532.7 and 292.9 eV, KNO₃ on a surface of specimen was found to be fully decomposed during the laser irradiation. It was suggested that Cs₂O particulates formed by the reaction between the reactive oxygen generated from the nitrate ion and Cs⁺ ion on the metal surface could be easily suspended. For the KOH system, FeOOH was formed during the laser irradiation and it changed into Fe₂O₃. It was also suggested that Cs₂O particulates were formed by the reaction between the reactive oxygen generated from the decomposition of K₂O and Cs⁺ ion on the metal surface..     

Crystallinity of Dynasan<Superscript>®</Superscript>114 and Dynasan<Superscript>®</Superscript>118 matrices for the production of stable Miglyol<Superscript>®</Superscript>-loaded nanoparticles

This study focuses on the physicochemical characterization of lipid materials useful for the production of the so-called solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The chosen lipids were Dynasan^®114 (glyceril trimyristate) and Dynasan^®118 (glyceril tristearate) as solid lipids (SL), melting temperature above 80 °C, and Miglyol^®812 (caprylic/capric triglyceride) and Miglyol^®840 (propylene glycol dicaprylate/dicaprate) as liquid lipids (LL), crystallizing below ?15 °C. Raw lipids (pure or SL:LL mixtures) were analyzed by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and Polarized Light Microscopy (PLM), before and after tempering at 80 °C for 1 h. The selected SL:LL combination was 70% (Dynasan^®114 and 118) and 30% (Miglyol^®812 and 840) for the production of SLN and NLC by high-pressure homogenization (HPH), respectively. Particles with a mean size of 200 nm (polydispersity index <0.329) and zeta potential of ?15 mV were obtained, and their long-term stability was confirmed for 3 months of storage at 7 °C.     

A study of the hydrolysis of ZrF<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack> and the structure of intermediate hydrolysis products by <Superscript>19</Superscript>F and <Superscript>91</Superscript>Zr NMR in the 9.4 T field

The high-field ¹⁹F and ⁹¹Zr NMR method is used to study the hydrolysis and polycondensation of hexafluorozirconate ZrF₆²⁻ in aqueous and water-peroxide solutions. During hydrolysis in aqueous solutions only ZrF₆²⁻ and F⁻ ions were observed by NMR, however, in the water-peroxide medium, an intermediate product of hydrolysis ([F₅Zr-OO-ZrF₅]⁴⁻ dimer) was detected. The dimer structure is confirmed by ¹⁹F and ⁹¹Zr NMR. In high fields (¹⁹F NMR frequency > 200 MHz), the fluorine exchange between ZrF₆²⁻ and F⁻ is slow in the ¹⁹F NMR scale and has a multisite character.     

Synthesis of the [<Superscript>2</Superscript>H,<Superscript>15</Superscript>N]-labeled antiviral drug “triazavirine”

Selective methods for the incorporation of stable isotopes ¹⁵N and ²H into the structure of antiviral medicine “triazavirine” 1 were developed. The synthesized isotopically modified “triazavirine” 1– ² H ₃ , ¹⁵ N ₃ contained the labeled atoms in both the azole and the azine rings. ¹³C and ¹⁵N NMR spectra of the isotope-containing sample 1– ² H ₃ , ¹⁵ N ₃ were thoroughly analyzed.     

Validation of <Superscript>239,240</Superscript>Pu, <Superscript>238</Superscript>Pu separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Pu02 gel and extraction chromatography TRU<Superscript>®</Superscript> resin

Two separation techniques for plutonium determination using AnaLig^® Pu02 molecular recognition technology product (MRT) and extraction chromatography TRU^® resin were tested. The methods performance was investigated by analysis of National Physical Laboratory (NPL-Alpha-Beta High, ABH 2003, 2005) intercomparison test samples. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis showed good agreement with the reference values. The AnaLig^® Pu02 separation method for ^239,240Pu, ²³⁸Pu determination was successfully validated with the same performance as the TRU^® resin method.     

Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Theoretical evaluation of the radiative lifetimes of LiCs and NaCs in the A<Superscript>1</Superscript>Σ<Superscript>+</Superscript> state

Calculations of the adiabatic potential energy curves and the transition dipole moments between the ground (A¹Σ⁺) and the first excited (A¹Σ⁺) states have been determined for the LiCs and NaCs molecules. The calculations are performed using an ab initio approach based on non-empirical pseudopotentials for Cs⁺, Li⁺ and Na⁺ cores, parameterized l-dependent polarization potentials and full configuration interaction calculations. The potential energy curves and the transition dipole moment are used to estimate the radiative lifetimes of the vibrational levels of the A⁺Σ⁺ state using the Franck–Condon (FC) approximation and the approximate sum rule method. The radiative lifetimes associated with the A⁺Σ⁺ state are presented here for the first time. These data can help experimentalists to optimize photoassociative formation of ultracold molecules and their longevity in a trap or in an optical lattice.     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions adsorption from dimethyl formamide at Hg- and Ga-electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions from their 0.1 M solutions in dimethyl formamide at renewable liquid Hg- and Ga-electrodes was studied under similar experimental conditions by the differential-capacitance and jet-electrode methods. The data obtained points out to a strong effect of the metal nature on adsorption parameters and the halogenide-ion surface activity series. The halogenide-ion surface activity at the Hg-electrode increased in the following sequence: Cl⁻ < Br⁻ < I⁻; at the Ga-electrode, in the reverse sequence: I⁻ < Br⁻ < Cl⁻. The results are explained qualitatively in terms of the Andersen-Bockris model. It follows from the obtained data that (1) the free energy of the metal-halogenide-ion interaction increases in the following sequence: I⁻ < Br⁻ < Cl⁻; (2) the free energy of the Ga-halogenide-ion interaction exceeds that of the Hg⁻halogenide-ion interaction; and (3) the difference of the Cl⁻, Br⁻, and I⁻ ions interaction with the metals increased significantly when passing from Hg⁻ to Ga-electrode.     

A simple and quick method for the preparation of radionuclide <Superscript>87</Superscript>Y/<Superscript>87m</Superscript>Sr generator using the <Superscript>nat</Superscript>Rb(α,xn)<Superscript>87</Superscript>Y reaction

A rapid method for the preparation of ⁸⁷Y/^87mSr radionuclide generator from a rubidium chloride target irradiated with 35 MeV α-particles is described. A simple two-step procedure is used to obtain a carrier-free ^87mSr isotope with a high enough radiochemical yield and high purity in the final aqueous fraction.     

Measuring <Superscript>226</Superscript>Ra and <Superscript>232</Superscript>Th activity in soil and vegetation samples using a method of double γ-coincidences

A coincidence method for measuring radium and thorium activity has been developed using the PRIPYAT-2M gamma-ray coincidence spectrometer, with six NaI(Tl) detectors and registration geometry close to 4π. It was tested by measuring soil samples from the Northern region of Montenegro, as well as vegetation samples from the same region. The results showed a good agreement with ones obtained by the HPGe spectrometer.     

High performance liquid chromatographic separation of <Superscript>228,229</Superscript>Th and <Superscript>232,233</Superscript>U and their estimation by α- and γ-ray spectrometry

The activities of ^228,229Th and ^232,233U from an irradiated ThO₂ sample were radiochemicaly separated by using high performance liquid chromatography. Plancheted sources of the separated samples were made and the amount of ^232,233U and ^228,229Th were estimated by using alpha and gamma-ray spectrometric techniques. These estimations are important for the Th–U fuel reprocessing cycle of advanced heavy water reactor and accelerator driven sub-critical system.     

Primary photophysical and photochemical processes upon UV excitation of PtBr<Subscript>6</Subscript><Superscript>2–</Superscript> and PtCl<Subscript>6</Subscript><Superscript>2–</Superscript> complexes in water and methanol

Primary photophysical and photochemical processes were studied for Pt^IVBr₆ ^2– and Pt^IVCl₆ ^2– complexes in water and methanol by ultrafast kinetic spectroscopy upon excitation in the band region of charge transfer from the ligand-centered group π-orbitals to the e_g*-orbital of Pt^IV complex anion (LMCT bands). The data obtained earlier upon excitation in the region of d—d bands were compared. Irrespective of the excitation wavelength, the photochemical properties of complexes are caused by the reactions of intermediates proceeding in the picosecond time range. These intermediates were identified as Pt^IVBr₅ ^– upon photolysis of Pt^IVBr₆ ^2– and, presumably, the Adamson radical pair [Pt^IIICl₅ ^2–(C _4v )...Cl?] upon photolysis of Pt^IVCl₆ ^2–. The difference in the exciting light wavelengths has an impact only on the first step of these processes, i.e., transition from the Franck—Condon excited state to intermediates.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Characterization and application of SuperLig<Superscript>®</Superscript> 620 solid phase extraction resin for automated process monitoring of <Superscript>90</Superscript>Sr

Characterization of SuperLig^® 620 solid phase extraction resin was performed in order to develop an automated on-line process monitor for ⁹⁰Sr. The main focus was on strontium separation from barium, with the goal of developing an automated separation process for ⁹⁰Sr in high-level wastes. High-level waste contains significant ¹³⁷Cs activity, of which ^137mBa is of great concern as an interference to the quantification of strontium. In addition barium, yttrium and plutonium were studied as potential interferences to strontium uptake and detection. A number of complexants were studied in a series of batch K_d experiments, as SuperLig^® 620 was not previously known to elute strontium in typical mineral acids. The optimal separation was found using a 2 M nitric acid load solution with a strontium elution step of ~0.49 M ammonium citrate and a barium elution step of ~1.8 M ammonium citrate. ⁹⁰Sr quantification of Hanford high-level tank waste was performed on a sequential injection analysis microfluidics system coupled to a flow-cell detector. The results of the on-line procedure are compared to standard radiochemical techniques in this paper.     

Electrical conductivity of potassium titanyl phosphate KTiOPO<Subscript>4</Subscript> pure crystals and those doped with Na<Superscript>+</Superscript>, Rb<Superscript>+</Superscript>, and F<Superscript>–</Superscript> ions

KTiOPO₄ crystals, both pure and doped with rubidium Rb⁺ and fluorine F^– ions, were grown in temperature range from 1060 to 846°С from salt solvent containing potassium metaphosphate КРО₃ and potassium orthophosphate К3РО₄ by using a Czochralski modified method. Potassium–sodium titanyl phosphate crystals were obtained from KTiOPO₄ crystals by the potassium isomorphic replacement with sodium; to this purpose, sodium chemical diffusion from NaNO₃ melt was used. Their ionic conductivity was studied by the electrochemical impedance spectroscopy method. The KTiOPO₄ crystal doping with rubidium and sodium ions was shown to lower the conductivity, whereas the doping with fluorine ions results in increased conductivity.     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.