有机紫外吸收剂插层锌铝水滑石的制备及表征

采用离子交换法，以去离子水或乙二醇为分散介质，制备了层间为磺基水杨酸、4-羟基-3-甲氧基肉桂酸和2-羟基-4-甲氧基二苯甲酮-5-磺酸等紫外吸收剂阴离子插层的锌铝水滑石。利用XRD、IR、TG-DTA等技术对样品结构进行表征，采用UV-Vis吸收光谱研究产物的光化学特性，并用Gaussian-98软件包中ab initio分子轨道法(HF/6-31G)计算了3种有机紫外吸收剂的分子结构和电荷分布，提出了合理的客体分子在主体层间的排列方式，分析了其结构与光化学行为的关系。研究表明，由于有机紫外吸收剂进入层间，不仅客体与主体层板存在静电力和氢键相互作用，而且在限域空间中有利于客体之间的相互作用，从而使插层产物的紫外吸收范围和能力显著增强，是一类具有潜在应用价值的无机-有机超分子复合结构的紫外吸收材料。     

钴铝和锌铝水滑石的合成

采用低过饱和共沉淀法合成了一系列锌铝和钴铝水滑石,其结构经IR和XRD表征。研究结果表明,两类水滑石晶体结构相似;钴铝水滑石的稳定性高于锌铝水滑石。     

乙二胺四乙酸柱撑镁锌铝三元水滑石的制备与表征

采用共沉淀法合成了Mg2ZnAl-CO3水滑石;以其为前驱体,利用离子交换法进行插层组装得到Mg2ZnAl-EDTA三元柱撑水滑石;采用X射线衍射仪和傅立叶变换红外光谱仪对产物进行了表征.结果表明,合成的Mg2ZnAl-CO3水滑石纯度高、晶型良好,其层间CO32-可被乙二胺四乙酸(EDTA)阴离子取代形成Mg2ZnAl-EDTA三元柱撑水滑石;柱撑水滑石的层间距离明显增加,EDTA阴离子在层间倾斜排列.     

阴离子插层镁铝水滑石结构及相互作用的理论研究

采用密度泛函理论(DFT)计算了MgAl-LDHs层板与无机阴离子(F^-、Cl^-、NO₃^-、CO₃^2-、SO₄^2-)和有机阴离子(水杨酸根离子([HO(C₆H₄)COO]^-)、苯甲酸根离子([(C₆H₅)COO]^-)、对二甲氨基苯甲酸根离子([p-(CH₃)₂N(C₆H₄)COO]^-)、十二烷基磺酸根离子[C₁₂H₂₅SO₃]^-、己烷基磺酸根离子[C₆H₁₃SO₃]^-、丙烷基磺酸根离子[C₃H₇SO₃]^-)间的相互作用,获得稳定超分子几何结构及相互作用能。层板主体与客体间存在较强的超分子作用,包括主客体间静电作用和氢键等。主、客体间相互作用能数值大小顺序为CO₃^2- > SO₄^2- > F^-> Cl^-> NO₃^-;[p-(CH₃)₂N(C₆H₄)COO]^-> [(C₆H₅)COO]^-> [HO(C₆H₄)COO]^-和[C₁₂H₂₅SO₃]^-> [C₆H₁₃SO₃]^- > [C₃H₇SO₃]^-。另外,还采用自然键轨道(NBO)计算和分析了LDHs 层板与阴离子间作用机理,从二阶微扰理论计算得到的稳定化能变化趋势与相互作用能数据基本吻合。     

反相气相色谱法探究铜镁铝水滑石的表面性质

采用共沉淀法合成了Cu_xMg_3-xAl-LDHs (x＝0～3), 利用FTIR 及IGC 法(反相气相色谱法)对合成的样品进行测试和表征, 并结合计算机模拟的结果来探讨铜镁铝水滑石的表面性质. 结果表明, 随 Cu²⁺含量的增加, 铜镁铝水滑石表面吸附自由能及表面能色散组分增加, 稳定性下降, 这可能由于Cu²⁺本身具有的Jahn-Teller 畸变会很大程度地影响层板的稳定性, 导致含铜水滑石体系的稳定性降低; 随着Cu²⁺含量的增加, 水滑石表面碱性先减小后增大.     

纳米晶镁铝水滑石的制备及其热分解机理

研究了无机阻燃剂镁铝水滑石纳米晶的制备及其热分解机理.采用常压下,一步反应的液相法制备镁铝水滑石试样，用XRD和TEM测试试样的相组成和形貌，针状镁铝水滑石纳米晶体的长度约80 nm.依据DSC和DTA-TG测试结果，发现镁铝水滑石纳米晶的热分解由两个阶段组成:第一个吸热峰出现在220 ℃左右，第二个吸热峰出现在380 ℃左右.研究了反应时间对所得镁铝水滑石试样的热分解性能的影响，发现延长反应时间，镁铝水滑石试样的第一次、第二次热分解的起始温度升高,第一次热分解的失重值增大，最后剩余氧化物的量增大，从而增强镁铝水滑石阻燃剂的阻燃性能.根据不同升温速率下获得的DSC测试数据，应用Achar微分法、Šatava-Šesták积分法和Ozawa积分法对镁铝水滑石纳米晶热分解的第二个阶段进行了动力学计算和分析，确定该段的热分解机理函数积分式为(1－α)－1－1.     

表面预处理对镁铝水滑石结构性质和缓释性能影响

以Mg-Al-NO₃水滑石（LDHs）为载体,将5-氟尿嘧啶（5-FU）通过离子交换法插入其层间,得5-FU/LDHs缓释材料。并对水滑石表面进行弱酸预处理改性,利用XRD、FTIR、TG-DSC、SEM和零电荷点（pHPZC）等表征手段,考察酸预处理对水滑石表面化学性质及微观结构的影响。结果表明,5-FU/LDHs的层间距从0.858nm扩大到1.064nm,层间5-FU₂阴离子与主体层板通过氢键与静电作用,以呈一定角度单层交替排列于层间。酸预处理的水滑石粒径变小,层板正电荷密度增大。5-FU的释放机理是物理扩散、离子交换和药物溶解等协同作用,酸预处理可提高水滑石的缓释性能和稳定性。     

镁铝二元水滑石的焙烧产物对染料废水酸性红88的吸附

研究了镁铝水滑石的焙烧产物(LDO)对阴离子染料废水酸性红88(AR88)的吸附特征。分别考察了染料的初始浓度、吸附剂投加量、初始pH值、反应温度和竞争离子等因素的影响,并用XRD、红外光谱对水滑石以及吸附前后的LDO进行了表征。实验结果表明：LDO对高浓度的AR88具有良好的去除效果,在15 ℃、pH=10～11下,1.0 g·L^-1的LDO对浓度为2 000 mg·L^-1的AR88的去除率可高达99.95%,吸附容量为1 999.0 mg·g^-1。经4次回收重复利用的LDO对AR88的去除率仍为90%以上。     

表面预处理对镁铝水滑石结构性质和缓释性能影响

以Mg-Al-NO3水滑石(LDHs)为载体,将5-氟尿嘧啶(5-FU)通过离子交换法插入其层间,得5-FU/LDHs缓释材料。并对水滑石表面进行弱酸预处理改性,利用XRD、FTIR、TG-DSC、SEM和零电荷点(pHPZC)等表征手段,考察酸预处理对水滑石表面化学性质及微观结构的影响。结果表明,5-FU/LDHs的层间距从0.858 nm扩大到1.064 nm,层间5-FU2阴离子与主体层板通过氢键与静电作用,以呈一定角度单层交替排列于层间。酸预处理的水滑石粒径变小,层板正电荷密度增大。5-FU的释放机理是物理扩散、离子交换和药物溶解等协同作用,酸预处理可提高水滑石的缓释性能和稳定性。     

以镁铝水滑石为前驱体制备复合氧化物催化丙酮气相缩合反应

采用共沉淀-恒温晶化法制备了系列镁铝水滑石(Mg-Al-LDH)样品,对镁铝水滑石在500 ℃焙烧得到镁铝复合氧化物(Mg-Al-LDO),采用IR、XRD、CO₂-TPD、SEM及N₂吸附-脱附等方法对Mg-Al-LDH和Mg-Al-LDO进行了表征。在温度250 ℃、液时空速1 h^-1条件下,采用固定床对镁铝复合氧化物催化剂对丙酮缩合反应的性能进行微反活性评价。研究结果表明,晶化时间与镁铝复合氧化物的弱碱性位和强碱性位的密度相关。丙酮缩聚反应的主要产物为异佛尔酮(IP)和异丙叉丙酮(MO),以及少量的异丙烯基丙酮、双丙酮醇,均三甲苯等。丙酮缩聚制备异佛尔酮的反应需要催化剂表面弱碱性位(S_w)与强碱性位(S_s)的协同作用,S_w与S_s需要匹配。晶化12 h得到的镁铝复合氧化物催化剂(LDO-12)的S_w/S_s=1.3,异佛尔酮(IP)选择性为65.3%,单程有效收率(IP+MO)为14.8%。     

牛黄酸及水杨酸系药物对镁铝层状复合氢氧化物的插层组装

通过XRD和IR表征对镁铝层状复合氧氧化物(LDH)与水杨酸、乙酰氨基酚、乙酰水杨酸,以及谷氨酸、色氨酸、牛黄酸反应产物的比较分析,研究了不同药物对有关组装方式的适宜性.结果表明水杨酸类药物均可通过离子交换组装到LDH层间,晶胞参数c由2.3893 nm依次增大为2.4024、2.4110和2.4111nm,通道高度h由0.3194 nm增大为0.3238、0.3267和0.3268 nm;通过离子交换能将谷氨酸组装到LDH层间,产物的IR吸收、热分解行为及TEM形貌与前体有明显区别,晶胞参数c由2.3765nm增大为2.3851nm,h由0.3152nm增大为0.3180nm;共沉淀法适宜制备LDH-牛黄酸插层复合物,但简单的离子交换不能使色氨酸与LDH有效复合.     

Dispersion control and nematic ordering of Ni/Al layered double hydroxide suspensions

In this paper, we report the preparation of aqueous suspensions of Ni/Al layered double hydroxide (LDH) nanoparticles by a non-steady co-precipitation followed by peptization. By choosing suitable peptization temperature and time, well-dispersed suspensions were obtained. Meanwhile, the particle size, shape and size polydispersity can be efficiently controlled. Nematic ordering is observed in colloidal Ni/Al LDH suspensions and confirmed by birefringence observations and SAXS measurements. Furthermore, we showed that the sol-gel transition takes place after a liquid crystalline phase transition in concentrated Ni/Al LDH suspensions. The absence of isotropic-nematic phase separation can be attributed to the fact that the nematic phase droplets are too small to settle to the bottom of the cuvette.     

Mg–Al layered double hydroxide intercalated with manganese(III) 5,10,15,20‐tetrakis(4‐benzoate)porphyrinacetate as a highly reusable catalyst for epoxidation

The preparation and characterization are presented of a new catalytic material comprising Mg–Al layered double hydroxide and intercalated manganese(III) 5,10,15,20‐tetrakis(4‐benzoate)porphyrinacetate. Characterization was realized via various techniques. The prepared composite exhibited excellent catalytic activity in the selective epoxidation of various olefins with tetra‐n‐butylammonium hydrogen monopersulfate as an oxidant under mild reaction conditions. Furthermore, the catalytic system could be reused nine times without significant reduction in conversion percentage and any special care or additional treatment of the catalyst.     

层状复合氢氧化物的制备改性及其对热塑性硫化胶的阻燃作用

用氩载氨气泡膜限域共沉淀反应合成了层状复合氢氧化物(LDH)及其硬脂酸改性样品,与热塑性硫化胶Santoprene熔炼制成LDH/Santoprene复合材料,在EDS、XRD、IR和N2吸解表征的基础上,对LDH-Santoprene复合物的机械性能及燃烧性能进行了测试评价.结果表明所用合成方法能够实现小尺寸LDH微晶的快速合成与表面改性,微晶粒度及表面性能明显改观;改性样品对Santoprene有更好的复合效果和明显的阻燃作用.     

Removal of radiocobalt from aqueous solution by Mg2Al layered double hydroxide

The adsorption behavior of radiocobalt by Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of contact time, pH, ionic strength, foreign ions, FA and temperature under ambient conditions. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Co(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of FA enhanced the adsorption of Co(II) on Mg₂Al LDH at low pH, whereas reduced Co(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Co(II) better than the Freundlich and D–R model at three different temperatures of 303, 323 and 343 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Co(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

The mechanism on the pH value influencing the property of glutamic acid/layered double hydroxide compounds

The influence of zeta potential, altered by the pH value in synthesis, on the property of glutamic acid (Glu for short)/LDH compounds has been studied. It was found that the layer charges increased first then decreased as the pH value increased, and the layer charge had prominent effect on the properties of the samples. The crystallinity degree and the interlayer spacing increased gradually and the morphology changed from tubular or fibrous to platelet structure as the layer charge increased. And a model has been proposed to explain how pH values in the synthesis influence the LDH compound property by altering their layer charges.     

Photooxidation of polypropylene/layered double hydroxide nanocomposites: Influence of intralamellar cations

The influence of layered double hydroxides (LDHs) on the photooxidation of polypropylene (PP)/LDH nanocomposites was studied under irradiation at long wavelengths (λ > 300 nm, 60 °C and in the presence of oxygen). The influence of hybrid LDHs containing different divalent cations (Mg, Zn or both Mg and Zn) on the photooxidation mechanism of PP and on the rates of oxidation of the matrix was characterised based on infrared analysis. The presence of LDHs modifies the photoproducts accumulating in the PP and the rates of oxidation of PP were changed depending on the divalent cations in the LDH layers. Whereas natural clays, such as montmorillonite (MMt), can lead to a faster degradation of the materials, LDHs (Zn₂-Al-DS, for example) appear to have no inductive effect on polymer oxidation.     

Photoluminescence property of a novel inorganic-organic red emitting phosphor based on Mg/Al/Eu layered double hydroxide

A novel inorganic-organic red light emitting phosphor was synthesized by intercalating a sensitizer anion, terephthalate into Mg/Al/Eu layered double hydroxides through an ion exchange method. The basal spacing is 13.9 Å, indicating that a vertical arrangement of terephthalate anions within the gallery is adopted. This material displays much enhanced red luminescence from Eu³⁺ ions, suggesting that there is an efficient energy transfer from the excited state of the intercalated terephthalate anions to Eu³⁺ centres in the host layers. The optimal doping concentration of Eu³⁺ is 10 mol %.     

Effect of environmental parameters on the sequestration of radionickel by Mg2Al layered double hydroxide

In this work, sequestration of Ni(II) from aqueous solution to Mg₂Al layered double hydroxide (Mg₂Al LDH) by adsorption process as a function of various water quality parameters and temperature was investigated. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Ni(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of humic acid (HA)/fulvic acid (FA) enhanced the adsorption of Ni(II) on Mg₂Al LDH at low pH, whereas reduced Ni(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Ni(II) better than the Freundlich model at three different temperatures of 298, 318 and 338 K. The thermodynamic parameters (ΔH^o, ΔS^o and ΔG^o) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Ni(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

The effect of Zn, Al layered double hydroxide on thermal decomposition of poly(vinyl chloride)

Poly(vinyl chloride)/layered double hydroxide (LDH) composite was prepared by mixing 4 wt% Zn₂Al-CO₃-LDH with PVC and fluxing at 180 °C. The thermal decomposition behaviour of the LDH + PVC composite in air and nitrogen environments was systematically investigated. We found that mixing Zn₂Al-CO₃-LDH into PVC facilitates dehydrochlorination from ca. 300 to 270 °C but reduces the reaction extent to leave more chlorine on the polyene backbones both in air and N₂. We have also found that at 400-550 °C, both in air and N₂, LDH assists the formation of char-like materials and decreases the release of volatile hydrocarbons. From 550 to 800 °C, the char-like materials are mostly retained in N₂ while they are almost completely thermo-oxidized (burned) in air. Thus, addition of Zn₂Al-CO₃-LDH to PVC does not increase the thermal stability, but does promote charring to retard the generation of flame. The influence of LDH on PVC thermal properties has been also addressed mechanically.