Temporal large-eddy simulation: theory and implementation

Large-eddy simulation (LES) has relied almost exclusively on spatial filtering to separate resolved and unresolved scales. For many reasons, temporal filtering may be more natural, particularly for flows of engineering interest. The paper develops the theory of temporal LES (TLES) and provides a demonstration of the concept by simulations of viscous Burger’s flow and incompressible plane-channel flow. The latter is accomplished by adapting the approximate deconvolution model (ADM) of Stolz and Adams (Phys. Fluids 11:1699, 1999) to causal, time-domain filtering. The temporal variant of the ADM is termed the TADM.      

Passive Scalar Transport Modeling for Hybrid RANS/LES Simulation

A transport model for hybrid RANS/LES simulation of passive scalars is proposed. It invokes a dynamically computed subgrid Prandtl number. The method is based on computing test-filter fluxes. The formulation proves to be especially effective on coarse grids, as occur in DES. After testing it in a wall resolved LES, the present formulation is applied to the Adaptive DDES model of Yin et al. (Phys. Fluids 27, 025105 2015). It is validated by turbulent channel flow and turbulent boundary layer computations.     

Features of a Turbulent Jet at High Supersonic Velocities

The results of modeling a turbulent supersonic jet at M = 5 using large-eddy simulation (LES) are presented. The structural features of turbulence formed in this flow are analyzed. The possibilities of the large-eddy simulation method and the complexities of simulation of the compressibility effects in jet flows at high Mach numbers are considered. Such features of the supersonic jet as the local turbulent shocklets and Mach waves are reproduced numerically. It is shown that in the neighborhood of the jet the trajectories of ejection flow are located along the front of Mach waves. Anisotropic turbulent structures whose longitudinal scale is greater than the transverse scale by an order of magnitude are revealed in the jet. An estimate of the baroclinic effects shows their weak influence on the vorticity generation in the jet flow considered.     

Parallel FEM LES with one-equation subgrid-scale model for incompressible flows

This article develops a parallel large-eddy simulation (LES) with a one-equation subgrid-scale (SGS) model based on the Galerkin finite element method and three-dimensional (3D) brick elements. The governing filtered Navier–Stokes equations were solved by a second-order accurate fractional-step method, which decomposed the implicit velocity–pressure coupling in incompressible flow and segregated the solution to the advection and diffusion terms. The transport equation for the SGS turbulent kinetic energy was solved to calculate the SGS processes. This FEM LES model was applied to study the turbulence of the benchmark open channel flow at a Reynolds number Re_τ = 180 (based on the friction velocity and channel height) using different model constants and grid resolutions. By comparing the turbulence statistics calculated by the current model with those obtained from direct numerical simulation (DNS) and experiments in literature, an optimum set of model constants for the current FEM LES model was established. The budgets of turbulent kinetic energy and vertical Reynolds stress were then analysed for the open channel flow. Finally, the flow structures were visualised to further reveal some important characteristics. It was demonstrated that the current model with the optimum model constants can predict well the organised structure near the wall and free surface, and can be further applied to other fundamental and engineering applications.     

Large-eddy and unsteady RANS simulations of a shock-accelerated heavy gas cylinder

Two-dimensional numerical simulations of the Richtmyer–Meshkov unstable “shock-jet” problem are conducted using both large-eddy simulation (LES) and unsteady Reynolds-averaged Navier–Stokes (URANS) approaches in an arbitrary Lagrangian–Eulerian hydrodynamics code. Turbulence statistics are extracted from LES by running an ensemble of simulations with multimode perturbations to the initial conditions. Detailed grid convergence studies are conducted, and LES results are found to agree well with both experiment and high-order simulations conducted by Shankar et al. (Phys Fluids 23, 024102, 2011). URANS results using a k–L approach are found to be highly sensitive to initialization of the turbulence lengthscale L and to the time at which L becomes resolved on the computational mesh. It is observed that a gradient diffusion closure for turbulent species flux is a poor approximation at early times, and a new closure based on the mass-flux velocity is proposed for low-Reynolds-number mixing.     

An investigation of thermally stratified turbulent channel flow with temperature oscillation on the bottom wall by large eddy simulation

Thermally stratified shear turbulent channel flow with temperature oscillation on the bottom wall of the channel is calculated to investigate the behavior of turbulent flow and heat transfer by use of large eddy simulation (LES) approach coupled with dynamic subgrid-scale (SGS) models. The objective of this study is to deal with the effect of the temperature oscillation on turbulent behavior of thermally stratified turbulent channel flow and to examine the effectiveness of the LES technique for predicting statistically unsteady turbulent flow driven by time-varying buoyancy force. To validate the present calculation, thermally stratified shear turbulent channel flow is computed and compared with available data obtained by direct numerical simulation (DNS), which confirm that the present approach can be used to predict thermally stratified turbulent channel flow satisfactorily. Further, to illustrate the effect of the temperature oscillation with different Richardson numbers and periods of the oscillation on turbulence characteristics, the phase-averaged mean value and fluctuation of the resolved velocities and temperature, and instantaneous velocity fluctuation structures are analyzed.     

Large-eddy simulation of stratified channel flow

An investigation of large-eddy simulation (LES) for turbulent channel flow with buoyancy effects was performed by solving the resolved incompressible Navier-Stokes equations under the Boussinesq approximation. The Smagorinsky eddy-viscosity model and Yoshizawa eddy-viscosity model were used to describe the unresolved subgrid scale (SGS) fluctuations respectively. After some numerical testing, the latter was further simplified so that it can be used in the dynamic model closure. A LES code was developed for parallel computations by using the parallel technique, and was run on the Dawn-1000 parallel computer. To demonstrate the viability and accuracy of the code, our results are compared with and found in good agreement with available LES results. The project supported by the National Natural Science Foundation of China and by the Youngster Funding of Academia Sinica     

From stratified wakes to rotor–stator flows by an SVV–LES method

We extend a large-eddy simulation (LES) methodology, based on using the spectral vanishing viscosity (SVV) method to stabilize spectral collocation approximations, from the Cartesian to the cylindrical geometry. The capabilities of the SVV–LES approach are illustrated for two very different physical problems: (1) the influence of thermal stratification on the wake of a cylinder, and (2) the instabilities that develop in transitional and fully turbulent rotor–stator flows.     

Large-eddy simulation of turbulent channel flow at transcritical states

We present well-resolved large-eddy simulations (LES) of a channel flow solving the fully compressible Navier–Stokes equations in conservative form. An adaptive look-up table method is used for thermodynamic and transport properties. A physically consistent subgrid-scale turbulence model is incorporated, that is based on the Adaptive Local Deconvolution Method (ALDM) for implicit LES. The wall temperatures are set to enclose the pseudo-boiling temperature at a supercritical pressure, leading to strong property variations within the channel geometry. The hot wall at the top and the cold wall at the bottom produce asymmetric mean velocity and temperature profiles which result in different momentum and thermal boundary layer thicknesses. Different turbulent Prandtl number formulations and their components are discussed in context of strong property variations.     

LES prediction of space-time correlations in turbulent shear flows

We compare the space-time correlations calculated from direct numerical simulation(DNS) and large-eddy simulation(LES) of turbulent channel flows.It is found from the comparisons that the LES with an eddy-viscosity subgrid scale(SGS) model over-predicts the space-time correlations than the DNS.The overpredictions are further quantified by the integral scales of directional correlations and convection velocities.A physical argument for the overprediction is provided that the eddy-viscosity SGS model alone does not includes the backscatter effects although it correctly represents the energy dissipations of SGS motions.This argument is confirmed by the recently developed elliptic model for space-time correlations in turbulent shear flows.It suggests that enstrophy is crucial to the LES prediction of spacetime correlations.The random forcing models and stochastic SGS models are proposed to overcome the overpredictions on space-time correlations.     

STUDY OF NON-SUBMERGED GROIN TURBULENCE FLOW IN A SHALLOW OPEN CHANNEL BYLES

采用动态亚格子模式和浸没边界法,对宽浅槽道中的丁坝群绕流的水动力学特性进行了三维大涡模拟研究. 利用丁坝绕流,试验中采用粒子图像测速仪(particle image velocimetry, PIV)测量的试验中自由水面处的时间平均流速和湍动强度数据对模型进行率定,结果表明计算结果与试验数据吻合良好. 丁坝长度与丁坝之间距离的比值L/D对丁坝周围的水流流动形式、湍流强度、涡量分布有显著影响. 在L保持不变并且L/D较大时,丁坝之间的距离D较小,这限制了混合层的发展,因此混合层中的湍动强度和涡量都较小;同时丁坝之间的回流区的流线形式也发生明显变化. 此外,还给出了涡体在丁坝坝头附近产生,发展并向下游输运的动态过程.     

Grid-averaged Lagrangian LES model for multiphase turbulent flow

A grid-averaged Lagrangian (GAL) model for dispersed particle motion in multiphase turbulent flow is presented to provide a large eddy simulation (LES) model for multiphase turbulent flow in which a quite large number of particles are involved. The GAL model is based on an averaging operation for a Lagrangian-type equation of motion of a particle over a computational grid volume and a procedure of reallocation of a dispersed particle cloud with its centroid movement to each grid. The model is therefore a mixed Eulerian–Lagrangian model which can effectively reduce computational time compared with existing Lagrangian-type models, without losing the advantage of Lagrangian-type models that they can properly describe the dynamical evolution of particles. Since the GAL model adopts the grid-volume averaging operation it can easily provide an effective SGS model for LES modeling of multiphase turbulent flow. The validity of the multiphase LES model developed, which is named the GAL-LES model, is confirmed through its application to a particle plume, in which the present model is found to simulate large-eddy motion usually observed in a jet and plume, and to give good agreements with experimental data.     

Spectral-based simulations of particle-laden turbulent flows

In this paper, we discuss the application of spectral-based methods to simulation of particle-laden turbulent flows. The primary focus of the article is on the past and ongoing works by the authors. The particles are tracked in Lagrangian framework, while direct numerical simulation (DNS) or large-eddy simulation (LES) is used to describe the carrier-phase flow field. Two different spectral methods are considered, namely Fourier pseudo-spectral method and Chebyshev multidomain spectral method. The pseudo-spectral method is used for the simulation of homogeneous turbulence. DNS of both incompressible and compressible flows with one- and two-way couplings are reported. For LES of particle-laden flows, two new models, developed by the authors, account for the effect of sub-grid fluctuations on the dispersed phase. The Chebyshev multidomain method is employed for the works on inhomogeneous flows. A number of canonical flows are discussed, including flow past a square cylinder, channel flow and flow over backward-facing step. Ongoing research on particle-laden LES of inhomogeneous flows is briefly reported.     

大涡模拟及其在湍流燃烧中的应用

大涡模拟作为一种研究湍流流动和湍流燃烧的有效手段,在国际上已经得到广泛应用。本文在回顾了大涡模拟(LES)的基本思想及其实施方法的基础上着重介绍了前人在大涡模拟的亚格子湍流模式和亚格子燃烧模式中的研究成果,同时给出了采用不同亚格子模式的大涡模拟在湍流燃烧中的应用实例,指出了大涡模拟在湍流燃烧中的重要作用,为大涡模拟的进一步发展和应用提供参考。      

A ghost-cell immersed boundary method for large-eddy simulations of compressible turbulent flows

A methodology to perform a ghost-cell-based immersed boundary method (GCIBM) is presented for simulating compressible turbulent flows around complex geometries. In this method, the boundary condition on the immersed boundary is enforced through the use of ‘ghost cells’ that are located inside the solid body. The computations of variables on these ghost cells are achieved using linear interpolation schemes. The validity and applicability of the proposed method is verified using a three-dimensional (3D) flow over a circular cylinder, and a large-eddy simulation of fully developed 3D turbulent flow in a channel with a wavy surface. The results agree well with the previous numerical and experimental results, given that the grid resolution is reasonably fine. To demonstrate the capability of the method for higher Mach numbers, supersonic turbulent flow over a circular cylinder is presented. While more work still needs to be done to demonstrate higher robustness and accuracy, the present work provides interesting insights using the GCIBM for the compressible flows.     

Theoretical Investigation of an Eddy-Viscosity-Type Expression of the Reynolds Stress with Low-Reynolds-Number Effect

In low-Reynolds-number turbulent flows, the influence of the molecular viscosity is important. The turbulence models which are applied to those flows should include the low-Reynolds-number effect. In this study, turbulent flow with the molecular viscosity effect is analyzed theoretically with the aid of a two-scale direct-interaction approximation (TSDIA) and the energy spectrum and a new low-Reynolds-number-type eddy-viscosity representation are derived. An priori test for the model expression on the basis of the result of direct numerical simulation (DNS) for turbulent Couette flows is performed. Received 5 July 2002 and accepted 8 January 2003 Published online 25 March 2003 Communicated by T.B. Gatski     

圆湍射流拟序结构研究进展

圆湍射流拟序结构的实验研究,经历了流场显示定性观测、热线、激光单点测量、数字图像等方法全流场定量测量以及当前三维演变机制的探讨。与此同时,静态激励和主动技术的拟序结构控制研究也获得了大量的成果。应用涡方法、直接数值模拟和大涡模拟等对圆湍射流拟序结构进行的数值模拟,在印证试验现象的同时,还进一步深入研究了拟序结构的输运特性、激发机制等相关内容。本文对上述进展进行了综述,以期为进一步开展湍射流的研究和应用提供依据。      

LES-based filter-matrix lattice Boltzmann model for simulating fully developed turbulent channel flow

In this paper, a three-dimensional filter-matrix lattice Boltzmann (FMLB) model based on large eddy simulation (LES) was verified for simulating wall-bounded turbulent flows. The Vreman subgrid-scale model was employed in the present FMLB–LES framework, which had been proved to be capable of predicting turbulent near-wall region accurately. The fully developed turbulent channel flows were performed at a friction Reynolds number Re_τ of 180. The turbulence statistics computed from the present FMLB–LES simulations, including mean stream velocity profile, Reynolds stress profile and root-mean-square velocity fluctuations greed well with the LES results of multiple-relaxation-time (MRT) LB model, and some discrepancies in comparison with those direct numerical simulation (DNS) data of Kim et al. was also observed due to the relatively low grid resolution. Moreover, to investigate the influence of grid resolution on the present LES simulation, a DNS simulation on a finer gird was also implemented by present FMLB–D3Q19 model. Comparisons of detailed computed various turbulence statistics with available benchmark data of DNS showed quite well agreement.     

Coupling tabulated chemistry with Large Eddy Simulation of turbulent reactive flows

A new modeling strategy is developed to introduce tabulated chemistry methods in the LES of turbulent premixed combustion. The objective is to recover the correct laminar flame propagation speed of the filtered flame front when the subgrid scale turbulence vanishes. The filtered flame structure is mapped by 1D filtered laminar premixed flames. Closure of the filtered progress variable and the energy balance equations are carefully addressed. The methodology is applied to 1D and 2D filtered laminar flames. These computations show the capability of the model to recover the laminar flame speed and the correct chemical structure when the flame wrinkling is completely resolved. The model is then extended to turbulent combustion regimes by introducing subgrid scale wrinkling effects on the flame front propagation. Finally, the LES of a 3D turbulent premixed flame is performed. To cite this article: R. Vicquelin et al., C. R. Mecanique 337 (2009).     

Experimental and Numerical Study of the Scalar Turbulent/Non-Turbulent Interface Layer in a Jet Flow

Based on two large-eddy simulations (LES) of a non-reacting turbulent round jet with a nozzle based Reynolds number of 8,610 with the same configuration as the one that has recently been investigated experimentally (Gampert et al., 2012; J Fluid Mech, 2012; J Fluid Mech 724:337, 2013), we examine the scalar turbulent/non-turbulent (T/NT) interface layer in the mixture fraction field of the jet flow between ten and thirty nozzle diameters downstream. To this end, the LES—one with a coarse grid and one with a fine grid—are in a first step validated against the experimental data using the axial decay of the mean velocity and the mean mixture fraction as well as based on radial self-similar profiles of mean and root mean square values of these two quantities. Then, probability density functions (pdf) of the mixture fraction at various axial and radial positions are compared and the quality of the LES is discussed. In general, the LES results are consistent with the experimental data. However, in the flow region where the imprint of the T/NT interface layer is dominant in the mixture fraction pdf, discrepancies are observed. In a next step, statistics of the T/NT interface layer are studied, where a satisfactory agreement for the pdf of the location of the interface layer from the higher resolved LES with the experimental data is observed, while the one with the coarse grid exhibits considerable deviations. Finally, the mixture fraction profile across the interface is investigated where the same trend as for the pdf of the location is present. In particular, it is found that the sharp interface that is present in experimental studies (Gampert et al., J Fluid Mech, 2013; Westerweel et al., J Fluid Mech 631:199, 2009) is less distinct in the LES results and rather diffused in radial direction outside of the T/NT interface layer.