Detection of magnetic nanoparticles with magnetoencephalography

Superconducting quantum interference devices (SQUIDs) have been widely utilized in biomedical applications due to their extremely high sensitivity to magnetic signals. The present study explores the feasibility of a new type of nanotechnology-based imaging method using standard clinical magnetoencephalographic (MEG) systems equipped with SQUID sensors. Previous studies have shown that biological targets labeled with non-toxic, magnetized nanoparticles can be imaged by measuring the magnetic field generated by these particles. In this work, we demonstrate that (1) the magnetic signals from certain nanoparticles can be detected without magnetization using standard clinical MEG, (2) for some types of nanoparticles, only bound particles produce detectable signals, and (3) the magnetic field of particles several hours after magnetization is significantly stronger than that of un-magnetized particles. These findings hold promise in facilitating the potential application of magnetic nanoparticles to in vivo tumor imaging. The minimum amount of nanoparticles that produce detectable signals is predicted by theoretical modeling and computer simulation.     

Nanocomposites of magnetic cobalt nanoparticles and cellulose

Polymeric matrices with stabilized metallic nanoparticles constitute an important class of nanostructured materials, because polymer technology allows fabrication of components with various electronic, magnetic and mechanical properties. The porous cellulose matrix has been shown to be a useful support material for platinum, palladium, silver, copper and nickel nanoparticles. In the present study, nanosized cobalt particles with enhanced magnetic properties were made by chemical reduction within a microcrystalline cellulose (MCC) matrix. Two different chemical reducers, NaBH₄ and NaH₂PO₂, were used, and the so-formed nanoparticles were characterized with X-ray absorption spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. These experimental techniques were used to gain insight into the effect of different synthesis routes on structural properties of the nanoparticles. Magnetic properties of the nanoparticles were studied using a vibrating sample magnetometer. Particles made via the NaBH₄ reduction were amorphous Co-B or Co oxide composites with diminished ferromagnetic behaviour and particles made via the NaH₂PO₂ reduction were well-ordered ferromagnetic hcp cobalt nanocrystals.     

Monolayer deposition of L10 FePt nanoparticles via electrospray route

The deposition monolayers of L1₀ FePt nanoparticles via an electrospraying method and the magnetic properties of the deposited film were studied. FePt nanoparticles in a size of around 2.5 nm in diameter, prepared by a liquid process, were used as a precursor. The size of the deposited particles can be controlled up to 35 nm by controlling the sprayed droplet size that is formed by adjusting the precursor concentration and the precursor flow rate. The droplets were heated in a tubular furnace at a temperature of up to 900 °C to remove all organic compounds and to transform the FePt particles from disordered face centered cubic to an ordered FCT phase. Finally, the particles were deposited in the form of a monolayer film on a silicon substrate by electrostatic force and characterized by scanning electron microscopy. The monolayer of particles was obtained by the high charge on particles obtained during the electrospraying process. The magnetic properties of the monolayer were investigated by magneto-optic Kerr effect measurements. Coercivity up to 650 Oe for a film consisting of 35 nm L1₀ FePt nanoparticles was observed after heat treatment at a temperature of 800 °C.     

Semiconductor Nanoparticles

Semiconductor nanoparticles exhibit size dependent properties, when their size is comparable to the size of Bohr diameter for exciton. This can be exploited to increase fluorescence efficiency or increase the internal magnetic field strength in doped semiconductors. Nanoparticles are usually unstable and can aggregate. It is therefore necessary to protect them. Surface passivation using capping molecules or by making core–shell particles are some useful ways. Here synthesis and results on doped and un-doped nanoparticles of ZnS, CdS and ZnO will be discussed. We shall present results on core–shell particles using some of these nanoparticles and also discuss briefly the effect of Mn doping on hyperfine interactions in case of CdS nanoparticles.     

Magnetic properties of extremely bimodal magnetite suspensions

In this paper, we investigate the magnetic properties of aqueous suspensions of extremely bimodal magnetite particles, including micro- (size ∼1450 nm) and nano-(size ∼9 nm) units. It is found that the addition of increasing concentrations of small particles increases the saturation magnetization, the coercive field, and the low-field susceptibility. The results are explained considering that the nano-magnetite used has a moderately wide size distribution, that embraces both the range of superparamagnetism (the lowest size interval) and of finite coercivity, all being single domain. In addition, the formation of a cloud of small particles surrounding the larger ones favors the chain formation by dipolar magnetic aggregation. It is concluded that the admixture of even small amounts of nanoparticles offers an excellent tool for the control of the magnetic properties of magnetite suspensions.     

Ferromagnetic properties of glucose coated Cu2O nanoparticles

Magnetic properties of glucose coated cuprous oxide nanoparticles of different sizes have been studied. Unlike bulk Cu₂O, which shows diamagnetic behavior, the nanoparticles show superparamagnetic behavior. A superparamagnetic blocking temperature of 21 K is observed for 5 nm particles. A magnetic hysteresis loop with a coercivity of 406 Oe is observed for these particles at 5 K. The magnetization and the coercivity increase with decreasing particle size. The superparamagnetic behavior, along with the increase in magnetization and coercivity with decreasing particle size, is due to the enhanced surface contributions to the magnetism.     

Site-directed research of magnetic nanoparticles in magnetic drug targeting

The targeting of ferrofluids composed of 20 nm magnetic particles was studied through simulation and animal experiment. The results showed that some magnetic particles were concentrated in the target area depending on the applied magnetic field. Through theoretical analysis, the retention of the magnetic nanoparticles in a target area is due to large magnetic liquid beads formed by the magnetic field.     

Specific features of magnetic properties of ferrihydrite nanoparticles of bacterial origin: A shift of the hysteresis loop

The results of the experimental investigation into the magnetic hysteresis of systems of superparamagnetic ferrihydrite nanoparticles of bacterial origin have been presented. The hysteresis properties of these objects are determined by the presence of an uncompensated magnetic moment in antiferromagnetic nanoparticles. It has been revealed that, under the conditions of cooling in an external magnetic field, there is a shift of the hysteresis loop with respect to the origin of the coordinates. These features are associated with the exchange coupling of the uncompensated magnetic moment and the antiferromagnetic “core” of the particles, as well as with processes similar to those responsible for the behavior of minor hysteresis loops due to strong local anisotropy fields of the ferrihydrite nanoparticles.     

Non-equilibrium effects in the magnetic behavior of Co3O4 nanoparticles

We report detailed studies of the non-equilibrium magnetic behavior of antiferromagnetic Co₃O₄ nanoparticles. The temperature and field dependence of magnetization, wait time dependence of magnetic relaxation (aging), memory effects, and temperature dependence of specific heat have been investigated to understand the magnetic behavior of these particles. We find that the system shows some features that are characteristic of nanoparticle magnetism such as bifurcation of field-cooled (FC) and zero-field-cooled (ZFC) susceptibilities and a slow relaxation of magnetization. However, strangely, the temperature at which the ZFC magnetization peaks coincides with the bifurcation temperature and does not shift on application of magnetic fields up to 1 kOe, unlike most other nanoparticle systems. Aging effects in these particles are negligible in both FC and ZFC protocols, and memory effects are present only in the FC protocol. We show that Co₃O₄ nanoparticles constitute a unique antiferromagnetic system which enters into a blocked state above the average Néel temperature.     

Numerical micromagnetics of interacting superparamagnetic nanoparticles assembled in clusters with different dimensionalities

We analyze here the equilibrium magnetization state of densely packed interacting superparamagnetic nanoparticles assembled in clusters of various sizes and dimensionalities by comparison with the non-interacting case. We demonstrate that the average magnetization of individual particles is strongly increased in linear chains aligned parallel with the external magnetic field. Two-dimensional (2D) distributions of superparamagnetic nanoparticles present weaker increases of their average magnetization with respect to the non-interacting approximation whereas volume distributions (3D) are almost equivalent with the non-interacting case. A large number of nanoparticles densely packed in 2D superparamagnetic clusters present almost the same magnetic moment as infinite superparamagnetic chains. The effect of mutual interactions on the total magnetic moment of 3D surfaces (spheroids with various aspect ratios) uniformly covered with densely packed monolayers of superparamagnetic nanoparticles is also investigated.     

Magnetic properties of self-assembled nanostructure films on the base of amorphous Ni granules

We report on structural and magnetic properties of granular films consisting of 2.5 nm Ni nanoparticles. The films are fabricated by the original laser electrodispersion technique, which allows producing nearly monodisperse and amorphous particles. Atomic force microscopy (AFM) study shows that in 8 nm thickness films the particles are self-assembled in clusters with the lateral size 100-150 nm and the height of about 8 nm. Performed by SQUID, the films magnetization measurements reveal superparamagnetic behaviour, characteristic for an ensemble of non-interacting single domain magnetic particulates. It is found that the magnetic moment of the particulate is equal to that of about 3000 individual Ni nanoparticles and the blocking temperature is close to room temperature. Defined from magnetic measurements, the size of single domain particulates correlates well with the size of the clusters determined from AFM images. We propose that exchange interaction plays an important role in the formation of the particulates by aligning the magnetic moments of the individual Ni nanoparticles inside the clusters. Presence of magnetic clusters with high blocking temperature makes the fabricated films potentially useful for high-density magnetic data storage applications.     

Enhanced Fluorescence Emission and Magnetic Alignment Control of Biphasic Functionalized Composite Janus Particles

Janus particles, particles that have two distinct aspects on their surface or interiors, have attracted much attention due to their potential for application. For the application of Janus particles to high‐resolution displays, and as light sources for optical circuits and fluorescent probes, the Janus particles should be nanosize to ensure high‐resolution display and analysis, responsive to external stimuli, and highly fluorescent. However, it is still a challenging issue to develop such highly fluorescent nanoscale Janus particles and control their alignment. Magnetoresponsive Janus particles, of which the orientation can be controlled by an external magnetic field, are prepared by the simple introduction of polymer‐coated magnetic nanoparticles (NPs) into the hemispheres of Janus particles. If these magnetoresponsive Janus particles can be combined with a strong fluorescence system, then they could be ideal candidates as components of the previously mentioned applications. In the present study, Janus particles are prepared with a fluorescent dye and gold nanoparticles (Au NPs) on one side. The optical properties of the resulting particles are assessed and discussed. Furthermore, the response of composite Janus particles containing dyes, Au NPs, and iron oxide NPs to an external magnetic field is discussed.     

From oleic acid-capped iron oxide nanoparticles to polyethyleneimine-coated single-particle magnetofectins

Various inorganic nanoparticle designs have been developed and used as non-viral gene carriers. Magnetic gene carriers containing polyethyleneimine (PEI), a well-known transfection agent, have been shown to improve DNA transfection speed and efficiency in the presence of applied magnetic field gradients that promote particle–cell interactions. Here we report a method to prepare iron oxide nanoparticles conjugated with PEI that: preserves the narrow size distribution of the nanoparticles, conserves magnetic properties throughout the process, and results in efficient transfection. We demonstrate the ability of the particles to electrostatically bind with DNA and transfect human cervical cancer (HeLa) cells by the use of an oscillating magnet array. Their transfection efficiency is similar to that of Lipofectamine 2000?, a commercial transfection reagent. PEI-coated particles were subjected to acidification, and acidification in the presence of salts, before DNA binding. Results show that although these pre-treatments did not affect the ability of particles to bind DNA they did significantly enhanced transfection efficiency. Finally, we show that these magnetofectins (PEI-MNP/DNA) complexes have no effect on the viability of cells at the concentrations used in the study. The systematic preparation of magnetic vectors with uniform physical and magnetic properties is critical to progressing this non-viral transfection technology.     

Structural and magnetic characterization of soft-magnetic FeCo alloy nanoparticles

Soft-magnetic FeCo alloy nanoparticles with diameters less than 100 nm are prepared by ball milling. X-ray photoemission spectroscopy (XPS) and X-ray magnetic circular dichroism (XMCD) are used to characterize these particles. While the XPS spectrum from the as-prepared sample clearly shows Co photoemission peaks, no sign of Fe is observed in the same spectrum. However, Fe photoemission peaks appear after 1 h of Ar ion sputtering. A quantitative analysis of the XPS spectra shows an increase of Fe concentration versus sputtering time until the Fe:Co ratio of the bulk alloy is reached. In addition, the narrow scan Fe and Co 2p XPS spectra show that Co is more oxidized than Fe. All these measurements indicate that the nanoparticles have a Co shell and an Fe-rich core. They further demonstrate the usefulness of XPS combined with depth-profiling via sputtering to obtain element- and chemically-sensitive structural information on nanoparticles. XMCD as an element-specific magnetic analysis tool further reveals that Fe and Co are ferromagnetically coupled in these particles. The information obtained is useful for establishing a structure–property relation for the studied material that is expected to have applications as a soft magnetic material at high temperatures.     

Size distribution effect on the magnetization and magneto-resistance in ferromagnetic nanostructured manganites

We present experimental data of magnetization and magneto-resistance of nanostructured La_2/3B_1/3MnO₃ with B=Ca, Sr, which present difference between the coercive field in the magnetization loop with their corresponding maximum value in the magneto-resistance. This difference is described by a model that include, size distribution of magnetic particles, randomly oriented anisotropy axis and electronic transfer between the particles, which is mediated by spin-polarized tunneling process. Also, the model predicts that the maximum magneto-resistance can be, in the magnetic disorder state, two times larger than the experimental value. The model results can be used to estimate the size dispersion of nanoparticles in similar systems.     

A model for predicting magnetic targeting of multifunctional particles in the microvasculature

A mathematical model is presented for predicting magnetic targeting of multifunctional carrier particles that are designed to deliver therapeutic agents to malignant tissue in vivo. These particles consist of a nonmagnetic core material that contains embedded magnetic nanoparticles and therapeutic agents such as photodynamic sensitizers. For in vivo therapy, the particles are injected into the vascular system upstream from malignant tissue, and captured at the tumor using an applied magnetic field. The applied field couples to the magnetic nanoparticles inside the carrier particle and produces a force that attracts the particle to the tumor. In noninvasive therapy, the applied field is produced by a permanent magnet positioned outside the body. In this paper, a mathematical model is developed for predicting noninvasive magnetic targeting of therapeutic carrier particles in the microvasculature. The model takes into account the dominant magnetic and fluidic forces on the particles and leads to an analytical expression for predicting their trajectory. An analytical expression is also derived for predicting the volume fraction of embedded magnetic nanoparticles required to ensure capture of the carrier particle at the tumor. The model enables rapid parametric analysis of magnetic targeting as a function of key variables including the size of the carrier particle, the properties and volume fraction of the embedded magnetic nanoparticles, the properties of the magnet, the microvessel, the hematocrit of the blood and its flow rate.     

Polystyrene/Fe3O4 magnetic emulsion and nanocomposite prepared by ultrasonically initiated miniemulsion polymerization

Ultrasonically initiated miniemulsion polymerization of styrene in the presence of Fe3O4 nanoparticles was successfully employed to prepare polystyrene (PS)/Fe3O4 magnetic emulsion and nanocomposite. The effects of Fe3O4 nanoparticles on miniemulsion polymerization process, the structure, morphology and properties of PS/Fe3O4 nanocomposite were investigated. The increase in the amount of Fe3O4 nanoparticles drastically increases the polymerization rate due to that Fe3O4 nanoparticles increase the number of radicals and the cavitation bubbles. Polymerization kinetics of ultrasonically initiated miniemulsion polymerization is similar to that of conventional miniemulsion polymerization. PS/Fe3O4 magnetic emulsion consists of two types of particles: latex particles with Fe3O4 nanoparticles and latex particles with no encapsulated Fe3O4 nanoparticles. Fe3O4 nanoparticles lower the molecular weight of PS and broaden the molecular weight and particle size distribution. Thermal stability of PS/Fe3O4 nanocomposite increases with the increase in Fe3O4 content. PS/Fe3O4 emulsion and nanocomposite exhibit magnetic properties. PS/Fe3O4 magnetic particles can be separated from the magnetic emulsion by an external magnetic field and redispersed into the emulsion with agitation.     

Local Magnetic Nanoparticle Delivery in Microvasculature

The transport and capture of therapeutic magnetic nanoparticles in human microvasculature is studied numerically. The nanoparticles are injected into a vascular system upstream from malignant tissue, and are captured at the tumour site with the aid of a local applied magnetic field positioned outside the body. Taking into account the dominant magnetic and fluidic forces on the particles, our study shows that the nanoparticles can be directed to and concentrated at the desired zone that is within a few centimetres from the surface of the body. In addition, influence of the particles size, average blood flow velocity and the diameter of the blood vessel on the captured efficiency are parametrically analysed.     

Fabrication of L10 FePtAg nanoparticles and a study of the effect of Ag during the annealing process

L1₀ ferromagnetic phase FePt nanoparticles containing Ag atoms (FePtAg) were synthesized by means of a liquid phase process, followed by annealing. The addition of Ag to FePt nanoparticles permits annealing to be conducted at a lower temperature (350 °C). This is further accompanied by a subsequent transformation in the crystal phase from the FCC superparamagnetic phase to the FCT (L1₀) ferromagnetic phase. The effects of annealing temperature and the Ag atoms inside the nanoparticles on the magnetic properties of the FePt nanoparticles have been studied. Using electron spectroscopy for the chemical analysis (ESCA), Ag atoms in the L1₀ phase FePtAg nanoparticles were found to be localized on the surface region of the annealed nanoparticles. The Ag atoms function to inhibit the oxidation of FePt, causing the particles to become more stable and to have ferromagnetic properties.     

Magnetic properties of Fe nanoparticles trapped at the tips of the aligned carbon nanotubes

The magnetic properties of iron nanoparticles partially encapsulated at the tips of aligned carbon nanotubes have been studied. The carbon nanotube wall not only protects the metallic particles from oxidization, but also reduces the inter-particle dipolar interaction by non-magnetic separation. Magnetic characterizations performed in the temperature range of 5–350 K with magnetic field up to 3 T show that these carbon-nanotube-supported iron particles are good candidates for high-density magnetic recording media.