Supramolecular Photocatalysis by Utilizing the Host–Guest Charge-Transfer Interaction: Visible-Light-Induced Generation of Triplet Anthracenes for [4+2] Cycloaddition Reactions

Supramolecular photocatalysis via charge-transfer excitation of a host–guest complex was developed by use of the macrocyclic boronic ester [2+2]_BTH-F containing highly electron-deficient difluorobenzothiadiazole moieties. In the presence of a catalytic amount of [2+2]_BTH-F, the triplet excited state of anthracene was generated from the charge-transfer excited state of anthracene@[2+2]_BTH-F by visible-light irradiation, and cycloaddition of the excited anthracene with several dienes and alkenes proceeded in a [4+2] manner in high yields.     

Novel solid-state synthesis of dimeric 4-aryl-1,4-dihydropyridines

On irradiation in the solid state the 4-aryl-1,4-dihydroypridines 1 undergo [2+2] cycloadditon to centrosymmetric head-to-tail dimers 3 and 4a . The almost exclusive formation of the cage dimers 3 via the C₂-symmetric syn-dimers 2 takes place in nearly quantitative yields, in contrast with the cycloaddition reaction of the anti-dimer 4a , which is accompanied by photooxidation to pyridine 5a .     

Solvent-controlled E/Z isomerization vs. [2 + 2] photocycloaddition mediated by supramolecular polymerization

Control over the photochemical outcome of photochromic molecules in solution represents a major challenge, as photoexcitation often leads to multiple competing photochemical and/or supramolecular pathways resulting in complex product mixtures. Herein, we demonstrate precise and efficient control over the photochemical behaviour of cyanostilbenes in solution using a straightforward solvent-controlled approach based on supramolecular polymerization. To this end, we designed a π-extended cyanostilbene bolaamphiphile that exhibits tuneable solvent-dependent photochemical behaviour. Photoirradiation of the system in a monomeric state (in organic solvents) exclusively leads to a highly reversible and efficient E/Z photoisomerization, whereas a nearly quantitative [2 + 2] photocycloaddition into a single cyclobutane (anti head-to-tail) occurs in aqueous solutions. These results can be rationalized by a highly regular and preorganized antiparallel J-type arrangement of the cyanostilbene units that is driven by aqueous supramolecular polymerization. The presented concept demonstrates a novel approach towards solvent-selective and environmentally friendly photochemical transformations, which is expected to broaden the scope of supramolecular polymerization.

Controlled supramolecular polymerization is used to switch the photoresponsive behaviour of cyanostilbenes from a reversible E/Z photoisomerization in organic solvents to a highly efficient and selective [2 + 2] photocycloaddition in aqueous media.     

Formal [4 + 4] cycloaddition of 3-arylcyclobutanones with anthracene and their acid-promoted intramolecular cyclization with skeletal rearrangement

A reaction of 3-arylcyclobutanones with anthracene in the presence of TiCl₄ gave 14-aryl-9,10-dihydro-9,10-butanoanthracen-12-ones as a formal [4 + 4] cycloadduct of anthracenes with a C4 unit formed by cleaving the more substituted C2C3 bond of cyclobutanones. On the other hand, activation of 3-arylcyclobutanones with TfOH in the absence of nucleophiles gave 2-tetralones with skeletal rearrangement.     

The cycloaddition reaction of 3,4-dimethyl-1-thio-1-phenylphosphole with tropone

3,4-Dimethyl-1-thio-1-phenylphosphole reacts, under elevated temperatures, with tropone to give two [4+2] isomeric adducts: Endo-syn-5,6-dimethyl-3-thio-3-phenyl-3-phosphatricyclo [5.3.2.0^2,6]dodec-4,8,11-trien-10-one (1) and Endo-anti-5,6-dimethyl-3-thio-3-phenyl-3-phosphatricyclo[5.3.2.0^2,6]dodec-4,9,11-trien-8-one (2). In addition to the endo-exo,syn-anti relationship the phosphorus configuration in 1, 2 and some derivatives was also elucidated by means of NMR-shift reagents and ²J_PH coupling constants.     

Supramolecular Photocatalysis by Utilizing the Host–Guest Charge‐Transfer Interaction: Visible‐Light‐Induced Generation of Triplet Anthracenes for [4+2] Cycloaddition Reactions

Supramolecular photocatalysis via charge‐transfer excitation of a host–guest complex was developed by use of the macrocyclic boronic ester [2+2]_BTH‐F containing highly electron‐deficient difluorobenzothiadiazole moieties. In the presence of a catalytic amount of [2+2]_BTH‐F, the triplet excited state of anthracene was generated from the charge‐transfer excited state of anthracene@[2+2]_BTH‐F by visible‐light irradiation, and cycloaddition of the excited anthracene with several dienes and alkenes proceeded in a [4+2] manner in high yields.     

1,5-Stereocontrol in tin(IV) halide mediated reactions between N- and S-substituted pent-2-enylstannanes and aldehydes or imines

Following transmetalation of (4S)-4-(dibenzylamino)pent-2-enyl(tributyl)stannane with tin(IV) bromide, reactions of the resulting allyltin tribromide with aldehydes gave (3Z)-1,5-syn-5-(dibenzylamino)hex-3-en-1-ols with excellent, ca. 98:2, stereocontrol. (4R)-5-Benzylthio-4-methylpent-2-enyl(tributyl)stannane similarly reacted with aldehydes to give (3Z)-1,5-anti-6-benzylthio-5-methylhex-3-en-1-ols with 87:13 stereocontrol. Although the analogous reaction of (4R)-4-benzylthiopent-2-enyl(tributyl)stannane with benzaldehyde proceeded with some stereoselectivity, 80–90:20–10, in favour of the (3Z)-1,5-syn-diastereoisomer, the yield was low due to a competing Lewis acid catalysed 1,4-elimination. N-Acylamino- and S-acylthio-pent-2-enylstannanes reacted with aldehydes with variable syn/anti-stereoselectivities. Tin(IV) chloride promoted reactions of the 4-(dibenzylamino)pent-2-enylstannane with 1-alkoxycarbonylimines gave (E)-alk-4-enoates with a modest preference for the 2,6-anti-products, 2,6-anti/2,6-syn=75:25.     

A novel donor-π-acceptor anthracene monomer: Towards faster and milder reversible dimerization

A novel functional 2,6-substituted donor-acceptor anthracene derivative, bearing a long alkyl spacer and a polymerizable end-group, is synthesized from readily available compounds. This monomer possesses conjugated electron donor and acceptor moieties to achieve UV absorption and anthracene dimerization at higher wavelengths and under milder conditions, than anthracene and other reported anthracene derivatives. The compound was shown to absorb at higher wavelengths and dimerize much faster compared to most 9-substituted anthracenes. The fast photochemical and relatively slow thermal scission of the dimers were studied and related to the chemical structure, i.e. the 2,6-substitution.     

α-Oxohydrazones as imine component in the synthesis of 4-functionalized azetidinones by the Staudinger reaction

1-(Methyl-p-tolyl-amino)-3-phenoxy-2-azetidinones 4-COX and 4-R substituted (COX: X=Me, Et, Ph, NMe₂, NEt₂, OBu^t; R=Me, Et, Ph) were smoothly prepared from the corresponding α-(methyl-p-tolyl)hydrazonylated ketones, amides and esters via [2+2] cycloaddition with phenoxyketene. The reaction was generally high-yielding and diastereoselective, leading to β-lactams with a cis relationship between the PhO and the COX moieties, except for R=Ph, where an opposite stereoselectivity was instead observed. The azetidinones represent interesting intermediates which couple protection at N(1) and functionalization at position 4 of the ring. Deprotection of N(1) can be easily attained by oxidative N-N cleavage with magnesium monoperoxyphthalate.     

Supramolecular helical architecture assembled by double-helical [Ag2L2] units

A series of new sterically hindered bridged ligand 4,4^′-methylene-N,N^′-bis(phenyl-2-pyridylmethylene)-bis(2,6-dialkylanil)s was efficiently synthesized by the condensation reaction of 4,4^′-methylene-bis(2,6-disubstituted aniline) and benzoyl pyridine. They easily coordinated with Ag(I) to form Ag(I) complexes. The structure of complex [Ag₂L⁴₂][ClO₄]₂ was determined by the single X-ray crystallographic analysis, and the double-helical asymmetric unit containing two [Ag₂L⁴₂] moieties was interconnected with the adjacent unit through hydrogen bonds to form a helical supramolecular architecture.     

Tandem [4 + 2]/[2 + 2] cycloaddition of o-carboryne with enynes: facile construction of carborane-fused tricyclics

o-Carboryne (1,2-dehydro-o-carborane) is a very useful synthon for the synthesis of a variety of carborane-functionalized molecules. With 1-Li-2-OTf-o-C₂B₁₀H₁₀ as the precursor, o-carboryne undergoes an efficient [4 + 2] cycloaddition with various conjugated enynes, followed by a subsequent [2 + 2] cycloaddition at room temperature, generating a series of carborane-fused tricyclo[6.4.0.0^2,7]dodeca-2,12-dienes in moderate to high isolated yields. This reaction is compatible with many functional groups and has a broad substrate scope. A reactive carborane-fused 1,2-cyclohexadiene intermediate is involved, which is supported by experimental results and DFT calculations. This protocol offers a convenient strategy for the construction of complex carborane-functionalized tricyclics.

An unprecedented tandem [4 + 2]/[2 + 2] cycloaddition of o-carboryne with enynes has been disclosed for the efficient synthesis of various carborane-fused tricyclics, in which a reactive carborane-fused 1,2-cyclohexadiene intermediate is involved.     

Self-assembled coordination cage as a reaction vessel: triplet sensitized [2+2] photodimerization of acenaphthylene, and [4+4] photodimerization of 9-anthraldehyde

Inner cavity of Pd-nanocage has been used as a reaction vessel for performing triplet sensitized [2+2] photodimerization of acenaphthylene using water soluble xanthene dyes (Eosin Y and Rose Bengal) as sensitizers, and [4+4] photodimerization of 9-anthraldehyde. Although the [4+4] photodimerization of 9-anthraldehyde gave similar results to solution reaction, the xanthene dye sensitized [2+2] triplet state photodimerization of acenaphthylene encapsulated within Pd-nanocage yielded the syn dimer in quantitative yield. The results obtained from the triplet state [2+2] photodimerization of acenaphthylene within Pd-nanocage is remarkable given the fact that the photodimerization reaction when performed in methanol in the presence of Eosin Y and Rose Bengal gave the syn and anti dimers in the ratio 0.5 and 0.6, respectively. Preaggregation of molecules encapsulated inside Pd-nanocage in a syn fashion seems to be the governing factor for such a behavior.     

Structural properties of five- and six-layered [3.3]metacyclophanes

We performed X-ray structural analyses of the five- and six-layered [3.3]metacyclophanes (MCPs) 1 and 2 and the six-layered [3.3]MCP tetraone 3. In the solid state, the MCP moieties of 1, 2, and 3 adopt different conformations from those of the free MCPs in solution. In the five-layered [3.3]MCP 1, all the [3.3]MCP moieties adopt anti (chair/boat) conformations. In the six-layered [3.3]MCP 2, two three-layered [3.3]MCPs are connected by a [3.3]MCP in the anti conformation with completely parallel benzene rings. In the six-layered [3.3]MCP tetraone 3, the outer [3.3]MCP moieties and diones adopt general syn and anti geometries, respectively. However, the inner [3.3]MCP moiety adopts an anti geometry. Based on density functional theory (DFT) calculations, the most stable conformers of 1, 2, and 3 are syn (chair/chair) in the [3.3]MCP moieties and anti (twist boat/twist boat) in the dione moieties.     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.     

Structural properties of charge-transfer complexes of four- and five-layered [3.3]metacyclophanes

In the solid state, the cyclophane (CP) moieties of the charge-transfer (CT) complexes of four- and five-layered [3.3]metacyclophanes (MCPs) 1 and 2 with tetracyanoethylene (TCNE) take different conformations from those in the solid state of the free MCPs. In the four-layered [3.3]MCP 1-TCNE complex, the CP moiety takes an s-shaped syn-anti-syn geometry, whereas the inner three benzene rings take the all-syn geometry and the two outer [3.3]MCP moieties have deformed anti-conformations in the five-layered [3.3]MCP 2-TCNE complex. In the crystal-packing diagrams of each complex, intermolecular CH/π-type interactions are observed between adjacent molecules.     

Visible-Light Photocatalysis of Asymmetric [2+2] Cycloaddition in Cage-Confined Nanospace Merging Chirality with Triplet-State Photosensitization

Although the photodimerization of acenaphthylene (ACE) has been known for 100 years, the asymmetric cycloaddition of its 1-substituted derivatives is unknown. Herein, we report a supramolecular photochirogenic approach in which a homochiral and photoactive Δ/Λ-[Pd₆(RuL₃)₈]²⁸⁺ metal–organic cage (Δ/Λ-MOC-16) is used as a supramolecular reactor for the enantioselective exited-state photocatalysis of 1-Br-ACE. Owing to preorganization of the substrates by the supramolecular cage, stereochemical control of the triplet state, and nanospace transfer of energy and chirality, the cycloaddition of ACE proceeded with high selectivity for the formation of anti over syn stereoisomers, whereas the regio-, stereo-, and enantioselective cycloaddition of unsymmetrical 1-Br-ACE showed effective enantiodifferentiation of a pair of anti head-to-head stereoisomers. The enzyme-mimicking photocatalysis was verified by catalytic turnover, rate enhancement, and competing-guest inhibition experiments.     

Efficient preparation of monoadducts of [60] fullerene and anthracenes by solution chemistry and their thermolytic decomposition in the solid state

The efficient preparation of monoadducts of [60]fullerene and seven anthracenes (anthracene, 1-methylanthracene, 2-methylanthracene, 9-methylanthracene, 9,10-dimethylanthracene, 2,3,6,7-tetramethylanthracene, and 2,6-di-tert-butylanthracene) by cycloaddition in solution is described. The seven mono-adducts of [60]fullerene and the anthracenes were characterized spectroscopically and were obtained in good yields as crystalline solids. The monoadducts of [60]fullerene and anthracene, 1-methylanthracene, 2-methylanthracene and 9,10-dimethylanthracene crystallized directly from the reaction mixture. The thermolytic decomposition at 180 degrees C of the crystalline monoadducts of [60]fullerene and anthracene, 1-methylanthracene, 9-methylanthracene and 9,10-dimethylanthracene all gave rise to the specific formation of a roughly 1:1 mixture of [60]fullerene and the corresponding antipodal bisadducts ("trans-1"-bisadducts) of [60]fullerene and the anthracenes. In contrast, the crystalline monoadducts of [60]fullerene and the anthracene derivatives 2-methylanthracene, 2,3,6,7-tetramethylanthracene and 2,6-di-tert-butylanthracene all decomposed to [60]fullerene and anthracenes (without detectable formation of bisadducts) upon heating in the solid state to temperatures of 180 to 240 degrees C. The formation of the antipodal bisadducts from thermolytic decomposition of crystalline samples of the monoadducts was rationalized by topochemical control.     

[2+2] photodimerization of 1-aryl-4-pyridylbutadienes through cation–π interactions

Irradiation of 1-aryl-4-pyridylbutadienes in the presence of 1 equiv of HCl produced syn and anti head-to-tail dimers, among a number of possible dimers, whereas irradiation in the absence of HCl gave a complex mixture. This indicated that the acid serves as a catalyst for the regio- and stereoselective [2+2] photodimerization of 1-aryl-4-pyridylbutadienes through cation–π interactions between the pyridinium and aromatic rings. The produced synHT dimers underwent Cope rearrangement to produce cyclooctadienes, and they were in equilibrium at a ratio of 85:15 in CDCl₃.     

C3‐Symmetric Assemblies from Trigonal Polycarbene Ligands and MI Ions for the Synthesis of Three‐Dimensional Polyimidazolium Cations

Metallosupramolecular poly‐NHC‐metal assemblies were prepared from trigonal hexakis (H₆‐ 1 a (PF₆)₆ and H₆‐ 1 b (PF₆)₆) or nonakis (H₉‐ 3 (BF₄)₉) imidazolium salts and Ag₂O. Complexes [Ag₆( 1 a )₂](PF₆)₆ and [Ag₆( 1 b )₂](PF₆)₆ are built from six Ag⁺ ions sandwiched between two trigonal hexacarbene ligands with an inner and an outer NHC donor in each of the three ligand arms. The metal atoms are arranged in two triangles. The hexakis‐NHC ligands bear cinnamic ester groups at the outlying NHC donors, used in postsynthetic [2+2] cycloaddition reactions linking two hexakis‐NHC ligands by three cyclobutane units to give complexes [Ag₆( 2 a )](PF₆)₆ and [Ag₆( 2 b )](PF₆)₆ bearing a dodecacarbene ligand. From the related nonakisimidazolium salt H₉‐ 3 (BF₄)₉, complex [Ag₉( 4 )](BF₄)₉ bearing an octadecacarbene ligand was obtained. Removal of the template metals yielded very large, stable, polyimidazolium cations with 12 or 18 internal imidazolium groups.