The measurements of coexistence curves and light scattering for {xC6H5CN + (1 − x)CH3(CH2)10CH3} in the critical region

The coexistence curves and light scattering data for a critical solution of (benzonitrile + dodecane) have been reported. The critical exponents relating to the difference in density variables of two coexisting phases β, the correlation length ν, and the osmotic compressibility γ have been determined. The experimental results of the coexistence curves have also been analyzed to examine the Wegner correction terms and the behavior of the diameter of the coexistence curves. The data analysis shows that the 3D-Ising behavior is valid in a temperature range close to the critical point. However, in a wide temperature range the exponential values of ν and γ change with the temperature significantly, clearly exhibiting the critical crossover from the 3D-Ising universality class to the classical one.     

Phase behaviour of the ternary system {poly(ε-caprolactone) + carbon dioxide + dichloromethane}

Recently, production of biocompatible and biodegradable polymer microparticles has been a matter of growing interest in pharmaceutical and food areas such as drug or active compounds delivery. To conduct production of microparticles, polymeric particle coating, impregnation of active compounds in polymeric films, the knowledge of phase behaviour involving the biodegradable polymer in supercritical carbon dioxide in the presence of a modifier may be needed to allow developing new industrial applications. In this sense, the aim of this work was to investigate the phase behaviour of the ternary system formed by the biodegradable polymer poly(ε-caprolactone) in (carbon dioxide + dichloromethane). Experimental phase transition (bubble and cloud point) values were obtained by applying the static-synthetic method using a variable-volume view cell over the temperature range of (303 to 343) K and pressures up to 21 MPa, in the CO₂ overall composition range of (25–46) wt%, while polymer concentrations studied were (1, 3, 5, and 7) wt%. For the system investigated, depending on the polymer concentration, vapour–liquid, liquid–liquid, and vapour–liquid–liquid phase transitions were verified.     

Temperatures of liquid–liquid separation and excess molar volumes of {N-methylpiperidine–water} and {2-methylpiperidine–water} systems

Partial miscibility in binary systems {N-methylpiperidine–water} and {2-methylpiperidine–water} was studied. The temperatures of liquid–liquid separation were determined as function of composition using both calorimetric technique and phase equilibrium cell. The densities of {amine–water} mixtures were determined in the domain of total miscibility at temperatures between 288 K and 338 K. Excess molar volumes were derived from experimental density data and fit to a Redlich–Kister polynomial.     

Modelling (vapour + liquid) and (vapour + liquid + liquid) equilibria of {water (H2O) + methanol (MeOH) + dimethyl ether (DME) + carbon dioxide (CO2)} quaternary system using the Peng–Robinson EoS with Wong–Sandler mixing rule

The (vapour + liquid) equilibria (VLE) and (vapour + liquid + liquid) equilibria (VLLE) binary data from literature were correlated using the Peng–Robinson (PR) equation of state (EoS) with the Wong–Sandler mixing rule (WS). Two group contribution activity models were used in the PRWS: UNIFAC–PSRK and UNIFAC–Lby. The systems were successfully extrapolated from the binary systems to ternary and quaternary systems. Results indicate that the PRWS–UNIFAC–PSRK generally displays a better performance than the PRWS–UNIFAC–Lby.     

The calculation of Cs and Rb conductivities in the region of liquid–plasma transition

The conductivity and thermal conductivity of Cs and Rb are calculated in the liquid phase and in the region between the plasma (gas) and the liquid states. The last area is located at the temperatures higher than the critical one, near the critical point. The Ziman formalism originated from the liquid metal theory was used for the calculations. The results of present calculations were compared with available experiments and calculations of other researchers. It was found that the liquid state formalism can be applied to expanded liquid Cs and Rb at densities higher than the critical one, but another type of models is necessary at lower densities.     

Measurements of the critical parameters for {xNH3 + (1 − x)H2O} with x = (0.9098, 0.7757, 0.6808)

Measurements of the critical parameters for {xNH₃ + (1 ? x)H₂O} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg · m^?3, and 8.8 · 10^?4, respectively. In each mole fraction, the critical temperature T_c was first determined on the basis of the intensity of the critical opalescence. The critical pressure p_c and critical density ρ_c were then determined as the point at which the meniscus disappears on the isotherm at T = T_c. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.     

Near critical measurements of HmEandVmE for { xCO2 + (1 − x)SF6} and measurements made over the pressure range 2.5 to 10.0 MPa at the temperature T = 301.95 K

A flow mixing calorimeter, followed by a vibrating tube densimeter, has been used to measure excess molar enthalpies H_m^Eand excess molar volumesV_m^E of {xCO₂ +  (1  − x)SF₆}. Measurements over a range of mole fraction x have been made at the temperatures T =  302.15 K and T =  305.65 K at the pressures (3.76, 5.20, 6.20, and 7.38) MPa. The lowest pressure 3.76 MPa is close to thecritical pressure of SF₆ and the highest pressure 7.38 MPa is close to the critical pressure of CO ₂. Measurements atx =  0.5 have been made over the pressure range (2.5 to 10.0) MPa at the temperature 301.95 K. Some of the measurements are very close to the critical locus of the mixture. The measurements are compared with the Patel–Teja equation of state which reproduces the main features of the excess function curves as well as it does for similar measurements on {xCO₂ +  (1  − x)C₂H₆} and{xCO₂ +  (1  − x)C₂H₄} . The equation was used to calculate residual enthalpies and residual volumes for the pure components and for the mixture, and inspection of the way these combine to give excess enthalpies and volumes assisted the interpretation of the pressure scan measurements.     

(Vapour + liquid) equilibria for the binary mixtures (cis-pinane + α-pinene) and (cis-pinane + 1-butanol)

The isothermal and isobaric (vapour + liquid) equilibria for (cis-pinane + α-pinene) and (cis-pinane + 1-butanol) measured with an inclined ebulliometer are presented. The experimental results are analysed using the UNIQUAC equation with the temperature-dependence binary parameters with satisfactory results. Experimental vapour pressures of cis-pinane are also included.     

Potentiometric study of acid–base equilibria in the {KCl + LiCl} eutectic melt at temperatures in the range (873 to 1073) K

Some heterogeneous reactions of oxide ion exchange (carbonate ion dissociation and magnesium oxide dissolution) in the molten {KCl + LiCl} eutectic at temperatures of (873, 973 and 1073) K were studied using an electrochemical cell with an oxygen membrane electrode Pt(O₂)|ZrO₂(Y₂O₃). The dissociation constant of the CO₃²⁻ was found to increase with increasing temperature: pK (873 K)=(2.39 ± 0.05); pK (973 K)=(1.81 ± 0.09); pK (1073 K)=(1.53 ± 0.08). Removal of CO₂ from the gas above the melt allows the complete transformation of CO₃²⁻ to O²⁻. pP_MgO values decrease more from (6.99 ± 0.08) to (5.41 ± 0.04). The oxobasicity indices, pI_(KCl+LiCl), were calculated from the solubility data to be 3.2 at 873 K, 3.4 at 973 K, and 3.6 at 1073 K. This trend suggests an increase in acidity with increasing temperature of {KCl + LiCl}.     

Critical behaviour of binary mixture of {xC6H5CN + (1 − x)CH3(CH2)7CH3}: Measurements of coexistence curves,light scattering,and heat capacity

Liquid + liquid coexistence, light scattering, and isobaric heat capacity per unit volume for the critical solutions of (benzonitrile + n-nonane) have been measured. The critical exponents relating to the coexistence curve β, the osmotic compressibility γ, the correlation length ν, and the heat capacity α have been deduced and the values are consistent with the 3D-Ising values in the range close to the critical point. The experimental results of the liquid + liquid coexistence were analyzed to examine the Wegner correction terms and the behaviour of the diameter of the coexistence curves. The light scattering data were well described by the crossover model proposed by Anisimov and Sengers, and showed a tendency of monotonic crossover of the critical exponents γ and ν from the 3D-Ising values to the mean-field values as the temperature departures from the critical point. From calorimetric measurements, the amplitude A^± and the critical background B_cr of the heat capacity in the critical region have been deduced and some universal ratios are tested.     

Critical behavior of binary mixture of {x C6H5CN + (1 − x) CH3(CH2)12CH3}: Measurements of coexistence curves,turbidity, and heat capacity

(Liquid + liquid) coexistence curve, turbidity, and isobaric heat capacity per unit volume for the critical solution of {benzonitrile + n-tetradecane} have been measured. The critical exponents β, ν, γ, and α and system-dependent critical amplitudes B, ξ₀, χ₀, and A^±, corresponding to the difference of the general density variable of two coexisting phases Δρ, the correlation length ξ, the osmotic compressibility χ, and the isobaric heat capacity per unit volume C_pV^?1, have been deduced and were used to test some universal ratios. The behavior of the diameter of the coexistence curves showed good agreement with the complete scaling theory. The analysis of effective critical exponent β_eff, which was well described by the crossover model proposed by Anisimov and Sengers, and effective critical exponent α_eff indicated monotonic crossover phenomena from 3D-Ising behavior to mean-field one as the temperature departed from the critical point.     

Electrocatalysis on gold nanostructures: Is the {1 1 0} facet more active than the {1 1 1} facet?

The anisotropic electrocatalytic properties of gold nanobelts and nanoplates enclosed by either {1 1 0} or {1 1 1} facets were studied. Different strategies were used to synthesize these materials. It was found that the {1 1 0} surface of gold does not necessarily show a higher electrocatalytic activity than the {1 1 1} surface. The {1 1 0} surface of gold is more active than the {1 1 1} surface for glucose oxidation in both, neutral and alkaline media. However, for methanol oxidation in alkaline solution, the {1 1 0} surface shows a lower activity than the {1 1 1} surface, which is contrary to the general belief that {1 1 0} facet is the most active surface among the three basal planes. The possible mechanisms are discussed.     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

Liquid–liquid equilibria for ternary systems of {cyclohexane + aromatic compounds + 1-ethyl-3-methylpyridinium ethylsulfate}

Liquid–liquid equilibrium (LLE) data for the ternary systems {cyclohexane + benzene + 1-ethyl-3-methylpyridinium ethylsulfate}, {cyclohexane + toluene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {cyclohexane + ethylbenzene + 1-ethyl-3-methylpyridinium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity, percent removal of aromatic, and solute distribution ratio, derived from the equilibrium data, were used to determine if this ionic liquid can be used as a potential solvent for the separation of aromatic compounds from cyclohexane. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with NRTL model have been compared with the experimental data.     

A thermodynamic study on solubility and liquid−liquid phase behaviour for 2,2,2-trifluoroethanol + cyclohexane + 1-butanol at three temperatures and pressure 101.3 kPa

This study demonstrates the course of solubility and (liquid + liquid) equilibrium (LLE) for the system (cyclohexane + 1-butanol + 2,2,2-trifluoroethanol) at temperatures of (288.15, 298.15, and 308.15) K and pressure 101.3 kPa. The titration method was used to assess solubility (binodal) curves, while a direct analytical method to acquire tie lines.The consistency of the binodal curves and phase diagrams data were well calculated by Hand and Othmer–Tobias empirical equations. The NRTL and UNIQUAC thermodynamic models gave accurate tie-line values for the systems. Plait-point, distribution coefficient, solvent selectivity, and NRTL and UNIQUAC binary interaction parameters were obtained.The immiscibility region of the system decreases significantly with increasing temperature. The results present an overview of the high efficiency of liquid extraction using 2,2,2-trifluoroethanol as solvent to yield pure cyclohexane from its 1-butanol azeotrope mixture at ambient temperatures.     

Molecular simulation of the phase behaviour of ternary fluid mixtures: the effect of a third component on vapour–liquid and liquid–liquid coexistence

The Gibbs ensemble algorithm is implemented to determine the vapour–liquid and liquid–liquid phase coexistence of dilute ternary fluid mixtures interacting via a Lennard–Jones potential. Calculations are reported for mixtures with a third component characterised by different intermolecular potential energy parameters. Comparison with binary mixture data indicates that the choice of energy parameter for the third component affects the composition range of vapour–liquid substantially. The addition of a third component lowers the energy of liquid phase while slightly increasing the energy of the vapour phase.     

A potentiometric study of acid–base properties of the (phenol + phenolate) systems in acetonitrile and, (acetonitrile + cyclohexane) solvent system

Acid–base equilibria were studied potentiometrically in (phenol + phenolate) systems involving nine substituted phenols with both electron-donating and electron-accepting substituents in a polar protophobic aprotic solvent, acetonitrile. To estimate the influence of the polarity of the medium on acid dissociation and anionic homoconjugation equilibria, the equilibrium constants were also determined in an (acetonitrile + cyclohexane) solvent in which the latter was a diluent that lowered the dielectric permittivity of the reaction medium, and compared with those determined in acetonitrile.