Synthesis and characterization of poly(thioether ether sulfone imide)s derived from isomeric bis(chlorophthalimide)s and bis(4-mercaptophenyl) sulfone

A series of isomeric bis(chlorophthalimide)s (BCPIs) were conveniently prepared from 3-chlorophthalic anhydride, 4-chlorophthalic anhydride, and mixtures thereof. Polymerization of BCPIs with bis(4-mercaptophenyl) sulfone (BMPS) proceeded smoothly in the presence of tributylamine, from which a class of isomeric poly(thioether ether sulfone imide)s (PTESIs) with inherent viscosities of 0.45-0.82 dL/g were obtained. The solubility, thermal stability, and mechanical properties of these polymers were characterized. Compared to the PTESIs derived from single BCPIs, i.e., 3,3′-, 3,4′-, or 4,4′-BCPIs, the PTESIs derived from mixed BCPIs showed better solubility and higher storage modulus. These PTESIs also demonstrated good thermal stability, giving only 5% weight loss at temperature of 490 °C in nitrogen atmosphere. The glass transition temperatures (T_gs) of these isomeric PTESIs were between 242 and 265 °C, and were increased with increasing of the ratio of 3-chlorophthalimide unit in the polymer backbone.     

Structure and conformational processes of bis(o-cumyl)sulfide, sulfoxide and sulfone

The NMR solution spectra of the title sulfide and sulfone show decoalescence of the geminal methyl signals of the isopropyl groups at low temperature (−178 °C for the ¹³C signal of sulfide at 150.8 MHz and −147 °C for the ¹H signal of sulfone at 600 MHz). The barriers for the related dynamic processes were measured (4.3 and 7.0 kcal mol⁻¹ for the sulfide and sulfone, respectively). The preferred conformer of sulfide has a propeller shape with a C₁ symmetry, as suggested by Molecular Mechanics (MM) calculations. In the case of sulfone the preferred conformer has a propeller shape with a C₂-anti symmetry, as indicated by calculations and supported by X-ray crystallographic determination. The computed contour map of the potential energy shows that in both cases the dynamic processes take place via correlated rotations (cogwheel mechanism) of the two aromatic substituents about the Ar-S bonds. Dynamic processes could not be observed by NMR in the title sulfoxide, which was also found to adopt a propeller shaped conformation, as indicated by MM calculations and X-ray diffraction.     

Synthesis and properties of sulfonated polyimides from homologous sulfonated diamines bearing bis(aminophenoxyphenyl)sulfone

Three homologous sulfonated diamines bearing a bis(aminophenoxyphenyl)sulfone structure, namely, bis[4‐(4‐aminophenoxy)phenyl]sulfone‐3,3′‐disulfonic acid (pBAPPS‐3DS), bis[4‐(4‐aminophenoxy)phenyl]sulfone‐2,2′‐disulfonic acid (pBAPPS‐2DS), and bis[4‐(4‐aminophenoxy)‐2‐(3‐sulfobenzoyl)phenyl]sulfone (pBAPPS‐2DSB), were synthesized. A series of sulfonated polyimides (SPIs) were synthesized from 1,4,5,8‐naphthalene tetracarboxylic dianhydride, these sulfonated diamines, and nonsulfonated diamines, and their properties were investigated in comparison with those reported for the SPIs from another homologous diamine or bis[4‐(3‐aminophenoxy)phenyl]sulfone‐3,3′‐disulfonic acid (mBAPPS‐3DS). These SPIs were soluble in common aprotic solvents and showed reasonably high proton conductivity, except for pBAPPS‐2DS‐based SPIs, the conductivity of which was slightly lower because of the lower water uptake. The water stability of these SPIs considerably depended on the structure of the sulfonated diamines and was in the order of pBAPPS‐2DSB ≈ pBAPPS‐2DS > pBAPPS‐3DS ? mBAPPS‐3DS. Their water stability was much lower than that of the SPIs from 4,4′‐bis(4‐aminophenoxy)biphenyl‐3,3′‐disulfonic acid. The reason was discussed on the basis of the basicity of the sulfonated diamine and the solubility property of the SPIs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2797–2811, 2007     

Convenient synthesis of bis(indolyl)alkanes and bis(pyrrolyl)alkanes by Cu(OTf)2-catalyzed addition of indole and pyrrole to acetylenic sulfone

Sulfonyl-containing bis(indolyl)alkanes and bis(pyrrolyl)alkanes were synthesized conveniently by Cu(OTf)₂-catalyzed double Michael addition of indole and pyrrole to acetylenic sulfone.     

Synthesis and characterization of amorphous poly(ethylene terephthalate) copolymers containing bis[4-(2-hydroxyethoxy)phenyl]sulfone

Poly(ethylene terephthalate) copolymers (abbreviated as PETS) that contain bis[4-(2-hydroxyethoxy)phenyl]sulfone (BHEPS) were prepared from dimethyl terephthalate (DMT), ethylene glycol (EG) (5-95%) and BHEPS (5-95%). The compositions and microstructures of the copolyesters were determined by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, respectively. The thermal behaviors were studied over the entire range of copolymer compositions, using X-ray analysis, differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The molecular weights, optical characteristics and tensile properties of these polymers were also determined. Experimental results indicated that the copolymers had a random microstructure. The intrinsic viscosities of the copolymers ranged from 0.65 to 0.69 dL/g. The copolyesters with BHEPS of <10 mol% were crystallizable, whereas the copolyesters with BHEPS of ?10 mol% were amorphous. Incorporating BHEPS affected the glass-transition temperature (T_g) values of those polymers, from about 81 °C for PETS₅ to 126 °C for PETS₉₅. The optical transmissions exceeded 86% for λ = 400 nm for all of the amorphous polyesters. The tensile modulus and strength of the copolyesters increased with BHEPS. However, they also became brittle and their elongation at break decreased.     

The crystal and molecular structures of bis (pentafluorophenyl)disulphide and bis(pentafluorophenyl)diselenide

The structures of (C₆F₅)₂S₂ and (C₆F₅)₂Se₂ have been determined by single crystal, X-ray diffraction techniques. The compounds are isostructural although the molecules are packed differently in the crystal in comparison with their phenyl analogues. Important bond lengths and angles are: SS, 2.059(4)Å; SeSe, 2.319(4)Å; SC, 1.770Å; SeC, 1.910(15)Å; SSC, 101.3(3)°; SeSeC, 98.8(1)°.     

The reaction of bis(phenyldimethylphosphine)bis(diphenylsilyl)platinum(II) with acetylenes

The synthesis and the reactions of cationic complexes of rhodium(I) and iridium(I) of the type [M(NN′)(COD)]⁺ and [M(NN′)(CO)₂]⁺ (NN′  Schiff bases of pyridine-2-aldehyde; COD  cis,cis-1,5-cyclooctadiene) are reported.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Hexafluorosilicates of bis(carboxypyridinium) and bis(2-carboxyquinolinium)

The preparation and characterization of three isomeric carboxypyridinium and carboxyquinolinium hexafluorosilicate salts is described. The salts of the general formulas (LH)₂[SiF₆] (I-III, L = 2-carboxypyridine, 3-carboxypyridine, 4-carboxypyridine) and (LH)₂[SiF₆]·2H₂O (IV, L = 2-carboxyquinoline) were prepared from the protonation reaction of the corresponding pyridine carbonic acid by the fluorosilicic acid. The compounds were characterized by IR, mass-spectrometry, thermogravimetric analysis, solubility data, and in the case of III by X-ray crystallography. The relationship between the salts solubility and the H-bonding system was analysed.     

The elucidation of the 1H- and 13C-NMR spectra of bis[N,N-di(2,3-epoxypropyl)-4-aminophenyl]methane (TGMDA) and composite with bis(4-animophenyl)sulfone (DDS) using two-dimensional fourier transform techniques

The application of Fourier transform (FT) two-dimensional nuclear magnetic resonance spectroscopy to the study of the composite of bis[N,N-di(2,3-epoxypropyl)-4-aminophenyl] methane (TGMDA) and the curing agent bis(4-aminophenyl)sulfone (DDS) is discussed. The combination of 2D-J resolved and homonuclear (proton) shift correlated experiments permits the complex proton spectrum due to the glycidylamine moiety to be completely elucidated. The potential utility of this in the study of the aging of prepreg is briefly discussed.     

Molecular structure and bonding properties of bis(1-methylimidazole)bis(perchlorato)bis(pyridineN-oxide)copper(II)

Summary The crystal and molecular structure of bis(1-methylimidazole)bis(perchlorato)bis(pyridineN-oxide)copper(II) have been determined using three-dimensional x-ray diffraction data. The complex crystallizes in space group P2₁/c with Z=2. The cell dimensions area=9.355(3),b=14.363(4),c=9.698(4) Å, and =106.40(3)^o. Least-squares refinement of the structure has yielded a final R value of 0.049 for 1235 independent reflections. The centrosymmetric structure consists oftrans pairs of 1-methylimidazole and pyridineN-oxide figands forming a square planar geometry with Cu–N and Cu–O bond lengths of 1.963(4) Å and 1.948(4) Å, respectively. The two perchlorate ions are located above and below the square plane with Cu–O distances of 2.590(5) Å. The uv-vis and i.r. spectra and bonding properties of the title compound are discussed with reference to the structure.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Preparation and characterization of bis(acetonitrile)bis(acetylacetonato)technetium(III)

A new chemical species of bis(acetonitrile)bis(acetylacetonato)technetium(III), [Tc(acac)₂(CH₃CN)₂]⁺, has been prepared by the reaction of tris(acetylacetonato)technetium(III) with acetonitrile in the presence of a strong acid, perchloric or hydrochloric acid. The reaction kinetics were followed by observing spectral change of Tc(acac)₃ in the UV-visible region. The complex has been characterized by combination of elemental analyses, IR and UV-visible spectrophotometry, ion-exchange chromatography, and paper electrophoresis. Applicability of this substance to synthesize mixed-ligand technetium(III) complexes was discussed based on the solubility of this complex and the ease of substitution of the acetonitrile ligand.     

Synthesis and characterization of bis(cyclopentadienyl)bis(hexafluoroantimonato) titanium(IV)

Reaction of titanocene dichloride with two equivalents of silver hexafluoroantimonate in sulphur dioxide quantitatively yields Cp₂Ti(SbF₆)₂ (Cp = η⁵-C₅H₅) and AgCl. The titanocene bishexafluoroantimonate was recrystallized from SO₂ and characterized by chemical analysis, ¹H NMR, IR and mass spectroscopy.