Redetermination of 1,3,5‐tri­chloro‐2,4‐di­nitro­benzene

The title compound, C₆HCl₃N₂O₄, is an intermediate in the synthesis of 1,3,5‐tri­chloro‐2,4,6‐tri­nitro­benzene. The crystal structure at 153 K shows no major deviations from the previously reported structure at 295 K other than the expected contraction of the a and c axes and, correspondingly, the β angle.     

2‐Chloro‐4,6‐di­methoxy‐1,3,5‐triazine

The mol­ecules of 2‐chloro‐4,6‐di­methoxy‐1,3,5‐triazine, C₅H₆ClN₃O₂, lie on a crystallographic mirror plane. There is a close contact of 3.180 (3) Å between one of the methyl C atoms and the N atom of a neighboring mol­ecule. Differential scanning calorimetry measurements show that methyl rearrangement does not take place in the solid state, despite the close proximity of the methyl group to the N atom.     

2‐(4‐Acetyl‐3,5‐di­hydroxy‐2‐methyl­phenoxy)‐4,6‐di­methoxy‐3‐methyl­benzoic acid

In the title compound, C₁₉H₂₀O₈, the benzene rings are nearly perpendicular to each other [dihedral angle 80.2 (2)°]. The carboxy group is twisted out while both the methoxy and acetyl groups are almost coplanar with their attached benzene rings. The hydroxy group is involved in an intramolecular O—H?O hydrogen bond with the acetyl O atom and the compound is connected through an intermolecular O—H?O contact to form a dimer. The crystal structure is stabilized by intermolecular O—H?O hydrogen bonds.     

7‐Chloro‐3,6‐di­methyl‐1H‐indene‐2‐carb­aldehyde

In the crystal structure of C₁₂H₁₁ClO, the (planar) mol­ecules give rise to a parallel packing. A model crystal obtained by semi‐empirical and packing‐energy calculations is consistent with the observed structure.     

trans‐Di­chloro‐cis‐bis(3,6‐di­methyl­carbazolyl)‐cis‐bis­(tetra­hydro­furan)­zirconium(IV) benzene sesquisolvate

In the title compound, [ZrCl₂(C₁₄H₁₂N)₂(C₄H₈O)₂]·1.5C₆H₆, the Zr atom is pseudo‐octahedral, with two Cl atoms in trans positions and two tetra­hydro­furan mol­ecules in cis positions. The two 3,6‐di­methyl­carbazolyl ligands are in cis positions and are canted with respect to one another. The two Zr—N distances are 2.1148 (18) and 2.1236 (18) Å, and the N—Zr—N angle is 95.08 (7)°. The title compound crystallizes as the benzene solvate, with one of the benzene mol­ecules positioned on an inversion center.     

(±)‐6‐Benzyl‐3,3‐di­methyl­morpholine‐2,5‐dione and its 5‐mono­thio and 2,5‐di­thio derivatives

The morpholine ring of the title dione, C₁₃H₁₅NO₃, shows a boat conformation that is distorted towards a twist‐boat, with the boat ends being the two Csp³ atoms of the ring. The benzyl substituent is in the favoured `exo' position. In the mono­thione derivative, (±)‐6‐benzyl‐3,3‐di­methyl‐5‐thioxo­morpholin‐2‐one, C<sub>13</sub>H<sub>15</sub>NO<sub>2</sub>S, this ring has a much flatter conformation that is midway between a boat and an envelope, with the di­methyl end being almost planar. The orientation of the benzyl group is `endo'. The di­thione derivative, (±)‐6‐benzyl‐3,3‐di­methyl­morpholine‐2,5‐di­thione, C₁₃H₁₅N­OS₂, has two symmetry‐independent mol­ecules, which show different puckering of the morpholine ring. One mol­ecule has a flattened envelope conformation distorted towards a screw‐boat, while the conformation in the other mol­ecule is similar to that in the mono­thione derivative. Intermolecular hydrogen bonds link the mol­ecules in the three compounds, respectively, into centrosymmetric dimers, infinite chains, and dimers made up of one of each of the symmetry‐independent mol­ecules.     

Chloro­di­methyl(N‐methyl­pyrrolidin­one)­tin(IV)‐μ‐chloro‐di­chloro­di­methyl­tin(IV)

The synthesis and the X‐ray structural analysis of the title compound, μ‐chloro‐1:2κ²Cl‐tri­chloro‐1κCl,2κ²Cl‐tetra­methyl‐1κ²C,2κ²C‐(N‐methyl­pyrrolidin‐2‐one)‐1κO‐ditin(IV), [Sn₂Cl₄(CH₃)₄(C₅H₉NO)], are described. The title compound is found to exhibit a distorted trigonal–bipyramidal geometry at both Sn^IV atoms. The Sn—Cl—Sn angle involving the bridging chlorine ligand is 135.56 (5)°, with the Sn—Cl bond lengths being 2.5704 (13) and 3.1159 (13) Å.     

2,4‐Bis(α,α‐di­methyl­benzyl)­phenol

The structure of the title compound, 2,4‐bis(1‐methyl‐1‐phenylethyl)phenol, C₂₄H₂₆O, was found to have a torsion angle of 129.95 (13)° for the C—C bond that connects the benzyl carbon to the phenol ring ortho to the OH group. A value of ～50° was expected from molecular mechanics calculations. Intermolecular interactions, in particular O—H?O and edge–face π bonding, may contribute to this discrepancy. Intramolecular O—H?π bonding is also observed.     

1,4‐Diethynyl‐2,5‐di­methoxy­benzene at ca 150 K

The principal determinants of packing in crystals of the title compound, C₁₂H₁₀O₂, which has crystallographically imposed inversion symmetry, are interactions between the alkyne H atoms and the methoxy O atoms [H⋯O = 2.39 (1) Å].     

Supramolecular structures of 2‐chloro‐5‐methyl­phenol and 4‐chloro‐3‐methyl­phenol (chlorocresol)

The crystal structures of the title compounds (both C₇H₇ClO) are characterized by two independent mol­ecules in each of the asymmetric units and feature O—H...O, C—H...π and π–π interactions. In addition, intermolecular C—H...Cl and intramolecular O—H...Cl interactions are present in 2‐chloro‐5‐methyl­phenol. For each crystal, the non‐covalent interactions emphasize the different spatial environments for the two independent mol­ecules.     

3‐(4‐Chloro­benzoyl)‐7‐(N,N‐di­methyl­amino)‐1‐phenyl­indolizine and 3‐(2,4‐di­chloro­benzoyl)‐7‐(N,N‐di­methyl­amino)‐1‐phenyl­indolizine

In both of the title compounds, C₂₃H₁₉ClN₂O, (I), and C₂₃H₁₈Cl₂N₂O, (II), the molecular packing is influenced by weak intermolecular C—H⋯O and C—H⋯π interactions, but despite the chemical similarity of the compounds, the packing in (II) is entirely different from that observed in (I).     

2,4‐Di­methoxy­benzoic acid and 2,5‐di­methoxy­benzoic acid

The title compounds (both C₉H₁₀O₄) have nearly planar structures, and the methyl and/or carboxylic acid groups lie out of the molecular plane, as dictated by steric interactions. 2,5‐Di­methoxy­benzoic acid (2,5‐DMBA) forms an unusual intramolecular hydrogen bond between the carboxylic acid group and the O atom of the methoxy group in the 2‐position [O⋯O = 2.547 (2) Å and O—H⋯O = 154 (3)°]. 2,4‐DMBA forms a typical hydrogen‐bond dimer with a neighboring mol­ecule.     

2,4‐Di­nitro­phenyl­hydrazones of 2,4‐di­hydroxy­benz­aldehyde, 2,4‐di­hydroxy­aceto­phenone and 2,4‐di­hydroxy­benzo­phenone

In 2,4‐di­hydroxy­benz­aldehyde 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­form­amide solvate {or 4‐[(2,4‐di­nitro­phenyl)­hydrazono­methyl]­benzene‐1,3‐diol N,N‐di­methyl­form­amide solvate}, C₁₃H₁₀N₄O₆·C₃H₇NO, (X), 2,4‐di­hydroxy­aceto­phenone 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­form­am­ide solvate (or 4‐{1‐[(2,4‐di­nitro­phenyl)hydrazono]ethyl}benzene‐1,3‐diol N,N‐di­methyl­form­amide solvate), C₁₄H₁₂N₄O₆·C₃H₇NO, (XI), and 2,4‐di­hydroxy­benzo­phenone 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­acet­amide solvate (or 4‐­{[(2,4‐di­nitro­phenyl)hydrazono]phenyl­methyl}benzene‐1,3‐diol N,N‐di­methyl­acet­amide solvate), C₁₉H₁₄N₄O₆·C₄H₉NO, (XII), the molecules all lack a center of symmetry, crystallize in centrosymmetric space groups and have been observed to exhibit non‐linear optical activity. In each case, the hydrazone skeleton is fairly planar, facilitated by the presence of two intramolecular hydrogen bonds and some partial N—N double‐bond character. Each molecule is hydrogen bonded to one solvent mol­ecule.     

Charge‐transfer complexes of 4‐(di­methyl­amino)­pyridine with 2,4‐, 3,4‐ and 3,5‐di­nitro­benzoic acid

In the three title crystal structures 4‐(di­methyl­amino)­pyridinium 2,4‐di­nitro­benzoate, (I), 4‐(di­methyl­amino)­pyri­dinium 3,4‐di­nitro­benzo­ate, (II), and 4‐(di­methyl­amino)pyri­din­ium 3,5‐di­nitro­benzo­ate, (III), all C₇H₁₁N₂⁺·C₇H₃N₂O₆^?, the ions are connected by an N—H?O hydrogen bond. Dihedral angles between the pyridine and phenyl rings are 69.9 (1), 26.7 (1) and 56.2 (1)° in (I), (II) and (III), respectively. Donor–acceptor π–π stacking is observed in (II) and (III), but not in (I).     

N‐(o‐Chloro­phenyl)‐2,5‐di­methyl­pyrrole‐3‐carb­aldehyde

Crystal structure analysis of the title compound, C₁₃H₁₂ClNO, reveals three crystallographically independent mol­ecules in the asymmetric unit. The main conformational difference between these mol­ecules is the orientation of the phenyl rings with respect to the pyrrole rings. The coplanar arrangement of the aldehyde groups attached to the pyrrole rings influences the pyrrole‐ring geometry. The C2—C3 and N1—C5 bonds are noticeably longer than the C4—C5 and N1—C2 bonds. Two independent mol­ecules of the title compound form dimers via intermolecular C—H⃛O hydrogen bonds [D⃛A = 3.400 (3) Å and D—H⃛A = 157°]. The perpendicular orientation of the phenyl and pyrrole rings of one independent mol­ecule and its symmetry‐related mol­ecule allows C—H⃛π interactions, with an H⃛centroid distance of 2.85 Å and a C—H⃛π angle of 155°. The distances between the H atom and the pyrrole‐ring atoms indicate that the C—H bond points towards one of the bonds in the pyrrole ring.     

1‐(2‐Hydroxy‐4,6‐di­methyl­phenyl)­ethanone

In the crystal of the title compound, C₁₀H₁₂O₂, there are two symmetry‐independent mol­ecules, which are essentially superimposable. Each mol­ecule exhibits an intramolecular O—H?O hydrogen bond, with O?O separations of 2.483 (4) and 2.468 (4) Å.     

Benzyl­triethyl­ammonium 2,2,2,4‐tetra­chloro‐2,5‐di­hydro‐1,2λ5‐oxatellurole

The geometry around the Te atom in the anion in C₁₃H₂₂N⁺·C₃H₃Cl₄OTe^? is distorted pseudo‐octahedral with three Cl atoms and the O atom forming the equatorial plane, and the C atom lying opposite the tellurium lone pair. Distances and angles are: Te—O 2.0120 (18), Te—C 2.072 (2), Te—Cl 2.5239 (7), 2.5283 (7) and 2.5577 (7) Å; O—Te—C 81.61 (9), O—Te—Cl 90.69 (6), 90.99 (6) and 168.13 (5), C—Te—Cl 87.13 (8), 86.64 (8) and 86.59 (8), and Cl—Te—Cl 87.02 (2), 90.00 (3) and 173.24 (3)°. The anions are arranged in an infinite zigzag chain parallel to the a axis through a secondary Te?Cl bond [3.8391 (8) Å].     

Synthesis of 3,6‐Dibromopyrazine‐2,5‐dicarbonitrile [1]

Symmetrically functionalized pyrazine of 3,6‐dibromopyrazine‐2,5‐dicarbonitrile was synthesized in three or four steps from 3‐aminopyrazinecarbonitrile or its 6‐bromo derivatives.     

Di­propyl 3,6‐di­phenyl‐1,2‐di­hydro‐1,2,4,5‐tetrazine‐1,2‐di­carboxyl­ate

The title compound, C₂₂H₂₄N₄O₄, was prepared from propyl chloro­formate and 3,6‐di­phenyl‐1,2‐di­hydro‐s‐tetrazine. This reaction yields the title compound rather than di­propyl 3,6‐di­phenyl‐1,4‐di­hydro‐s‐tetrazine‐1,4‐di­carboxyl­ate. The 2,3‐di­aza­buta­diene group in the central six‐membered ring is not planar; the C=N double‐bond length is 1.285 (2) Å, and the average N—N single‐bond length is 1.401 (3) Å, indicating a lack of conjugation. The ring has a twist conformation, in which adjacent N atoms lie 0.3268 (17) Å from the plane of the ring. The mol­ecule has twofold crystallographic symmetry.     

3‐Germyl‐3,3‐di­methyl­propionic acid derivatives

The crystal structures of 3,3‐di­methyl‐3‐(tri­chloro­germyl)­propionic acid, [Ge(C₅H₉O₂)Cl₃], 3,3‐di­methyl‐3‐(tri­phenyl­germyl)­propionic acid, [Ge(C₆H₅)₃(C₅H₉O₂)], and 3,3‐di­methyl‐3‐(tri‐p‐toly­lgermyl)­propionic acid, [Ge(C₇H₇)₃(C₅H₉O₂)], have slightly distorted tetrahedral geometries about the Ge atoms. All the structures form dimers via strong O—H·O hydrogen bonds, resulting in eight‐membered rings that can be best described in terms of graph‐set notation (8).