AbstractThe organic photocatalyst, perylene, was used to mediate photoinduced electron transfer (PET) reversible addition-fragmentation chain transfer polymerization (RAFT) of methyl methhacrylate (MMA) under light irradiation in N,N-dimethylformamide (DMF) at 25°C with 4-cyanopentanoic acid dithiobenzoate (CPADB) as chain transfer agent (CTA). Kinetic studies confirmed that the polymerization obeyed the first order kinetic m'odel. The production of PMMAs with a good control of molecular weights (Mn,GPC) and narrow polymer molecular weight distribution (Mw/Mn) were obtained. It is found that well-controlled PET RAFT polymerization of MMA can be manipulated even with the amount of perylene decreasing to ppm level. No polymer was obtained in the absence of light irradiation, implying that the model of PET RAFT polymerization of MMA is an ideal light “on”-“off” switchable system. Furthermore, the speed of PET RAFT polymerization of MMA was also finely tunable by the external light irradiation intensity. The resultant PMMA macro-CTA was characterized by 1H nuclear magnetic resonance spectrum (1H NMR) and gel permeation chromatography (GPC). The accessibility of the high end group fidelity was further demonstrated by chain extension experiments. 相似文献
This paper describes the homopolymerisations of isobornyl methacrylate (IBMA) and poly(ethylene glycol) methacrylate (PEGMA) in supercritical carbon dioxide (scCO2) and copolymerisation with methyl methacrylate (MMA). We have used two different stabiliser systems poly(dimethyl siloxane) monomethylacrylate (PDMS-MMA) and Krytox 157FSL, both of which have been shown previously to be highly effective stabilisers for dispersion polymerisation in scCO2. The effect of initiator concentration and copolymer composition is studied. For the copolymerisation of IBMA and MMA, under optimised conditions it is possible to form discrete particles with diameters in the range 1.4-3.6 μm. The PDMS-MMA macromonomer was found to be less effective as a stabiliser, causing particle aggregation due to the low solubility of this stabiliser in the monomers. The copolymers of PEGMA and MMA are also studied. The materials have interesting solubility properties with a transition in solubility from aqueous to organic media on increasing the MMA content. 相似文献
We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles. UiO-66, UiO-66-NH2, and MIL-88B-NH2 were functionalized with a catechol-bound chain-transfer agent (CTA) to graft poly(methyl methacrylate) (PMMA) from the surface of the MOF using reversible addition-fragmentation chain transfer polymerization (RAFT). The polymer-coated MOFs were self-assembled at the air–water interface into monolayer films ∼250 nm thick and capable of self-supporting at a total area of 40 mm2. Mixed-particle films were prepared through the assembly of MOF mixtures, while multilayer films were achieved through sequential transfer of the monolayers to a glass slide substrate. This method offers a modular and generalizable route to fabricate thin-films with inherent porosity and sub-micron thickness composed of a variety of MOF particles and functionalities.We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles.相似文献
Small-angle X-ray scattering (SAXS) is used to characterize the in situ formation of diblock copolymer spheres, worms and vesicles during reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate at 70 °C using a poly(glycerol monomethacrylate) steric stabilizer. 1H NMR spectroscopy indicates more than 99% HPMA conversion within 80 min, while transmission electron microscopy and dynamic light scattering studies are consistent with the final morphology being pure vesicles. Analysis of time-resolved SAXS patterns for this prototypical polymerization-induced self-assembly (PISA) formulation enables the evolution in copolymer morphology, particle diameter, mean aggregation number, solvent volume fraction, surface density of copolymer chains and their mean inter-chain separation distance at the nanoparticle surface to be monitored. Furthermore, the change in vesicle diameter and membrane thickness during the final stages of polymerization supports an ‘inward growth’ mechanism. In situ small-angle X-ray scattering is used to monitor the formation of diblock copolymer spheres, worms and vesicles during reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate.相似文献
Herein, we report a novel type of symmetrical trithiocarbonate chain transfer agent (CTA) based diphenylmethyl as R groups. The utilization of this CTA in the Reversible Addition-Fragmentation chain Transfer (RAFT) process reveals an efficient control in the polymerization of methacrylic monomers and the preparation of block copolymers. The latter are obtained by the (co)polymerization of styrene or butyl acrylate using a functionalized macro-CTA polymethyl methacrylate (PMMA) previously synthesized. Data show low molecular weight dispersity values (Đ < 1.5) particularly in the polymerization of methacrylic monomers. Considering a typical RAFT mechanism, the leaving groups (R) from the fragmentation of CTA should be able to re-initiate the polymerization (formation of growth chains) allowing an efficient control of the process. Nevertheless, in the case of the polymerization of MMA in the presence of this symmetrical CTA, the polymerization process displays an atypical behavior that requires high [initiator]/[CTA] molar ratios for accessing predictable molecular weights without affecting the Đ. Some evidence suggests that this does not completely behave as a common RAFT agent as it is not completely consumed during the polymerization reaction, and it needs atypical high molar ratios [initiator]/[CTA] to be closer to the predicted molecular weight without affecting the Đ. This work demonstrates that MMA and other methacrylic monomers can be polymerized in a controlled way, and with “living” characteristics, using certain symmetrical trithiocarbonates. 相似文献
Polystyrene, poly(methylacrylate) and poly(methyl methacrylate) four and three-arm stars were synthesized by Reversible Addition Fragmentation chain-Transfer (RAFT) polymerization by using two new dithioester-derived chain transfer agents [CTA or R-S-(C = S)Z]), CTA-1 and CTA-2. CTA-1 is a four arm CTA while CTA-2 is a three-arm CTA. These were easily synthesized from commercially available reagents and were characterized by spectroscopic techniques such as 1H-NMR, 13C-NMR, IR and mass spectrometry. It is demonstrated that the two new CTAs enable the growth of arms away from the core (i.e., core first approach). An attempt has been made to study the effect of the structure of the R-group, which is present as the core in the CTA, on the polymerization, by analyzing the detailed kinetics. This study suggests that CTA-2, with a benzylic R group, enables the controlled star polymerization of styrene while CTA-1, with a R group similar in structure to the propagating radical derived from the polymerization of methyl acrylate (MA), enables the controlled polymerization of MA although to a lesser extent. This study also reveals that the temperature of free radical initiated RAFT (star) polymerization should be chosen in such a way that it is a compromise between reasonable rate of homolysis of the initiator and the CTA (R-group). 相似文献
Summary: Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a recent and very versatile controlled radical polymerization technique that has enabled the synthesis of a wide range of macromolecules with well‐defined structures, compositions, and functionalities. The RAFT process is based on a reversible addition‐fragmentation reaction mediated by thiocarbonylthio compounds used as chain transfer agents (CTAs). A great variety of CTAs have been designed and synthesized so far with different kinds of substituents. In this review, all of the CTAs encountered in the literature from 1998 to date are reported and classified according to several criteria : i) the structure of their substituents, ii) the various monomers that they have been polymerized with, and iii) the type of polymerization that has been performed (solution, dispersed media, surface initiated, and copolymerization). Moreover, the influence of various parameters is discussed, especially the CTA structure relative to the monomer and the experimental conditions (temperature, pressure, initiation, CTA/initiator ratio, concentration), in order to optimise the kinetics and the efficiency of the molecular‐weight‐distribution control.
SUMMARY: Factors affecting the choice of RAFT agent [RSC(Z) = S] for a given polymerization are discussed. For polymerization of methyl methacrylate (MMA), tertiary cyanoalkyl trithiocarbonates provide very good control over molecular weight and distribution and polymerizations show little retardation. The secondary trithiocarbonate RAFT agents with R = CHPh(CN) also gives good control but an inhibition period attributed to slow reinitiation is manifest. Radical induced reduction with hypophosphite salts provides a clean and convenient process for removal of thiocarbonylthio end groups of RAFT-synthesized polymers. Two methods providing simultaneous control over stereochemistry and molecular weight distribution of chains formed by radical polymerization are reported. Polymerization of MMA in the presence of scandium triflate provides a more isotactic PMMA. A similar RAFT polymerization with trithiocarbonate RAFT agents also provides control and avoids issues of RAFT agent instability seen with dithiobenzoate RAFT agents in the presence of Lewis acids. RAFT polymerization of tetramethylammonium methacrylate at 45 °C provides a more syndiotactic PMMA of controlled molecular weight and distribution (after methylation; mm:mr:rr 2:21:77 compared to 3:35:62 when formed by bulk polymerization of MMA). 相似文献