Synthesis and spectroscopic studies of optically active n‐acetyl butenoates and n‐acetyl‐2‐alkyl‐pyrrolin‐4‐ones

The synthesis of a series of optically active N‐acetyl butenoates 3–5 is described using a facile methodology. These butenoates undergo cyclization to the corresponding N‐acetyl‐2‐alkyl‐pyrrolin‐4‐ones 6,7 retaining their stereochemical integrity. The structure of the newly synthesized compounds has been elucidated through ¹H‐¹³C NMR, IR spectroscopy and their enantiomeric excesses have been measured by chiral HPLC analysis.     

Hydrogen‐bonding patterns in 3‐alkyl‐3‐hydroxyindolin‐2‐ones

The molecules of racemic 3‐benzoylmethyl‐3‐hydroxyindolin‐2‐one, C₁₆H₁₃NO₃, (I), are linked by a combination of N—H...O and O—H...O hydrogen bonds into a chain of centrosymmetric edge‐fused R₂²(10) and R₄⁴(12) rings. Five monosubstituted analogues of (I), namely racemic 3‐hydroxy‐3‐[(4‐methylbenzoyl)methyl]indolin‐2‐one, C₁₇H₁₅NO₃, (II), racemic 3‐[(4‐fluorobenzoyl)methyl]‐3‐hydroxyindolin‐2‐one, C₁₆H₁₂FNO₃, (III), racemic 3‐[(4‐chlorobenzoyl)methyl]‐3‐hydroxyindolin‐2‐one, C₁₆H₁₂ClNO₃, (IV), racemic 3‐[(4‐bromobenzoyl)methyl]‐3‐hydroxyindolin‐2‐one, C₁₆H₁₂BrNO₃, (V), and racemic 3‐hydroxy‐3‐[(4‐nitrobenzoyl)methyl]indolin‐2‐one, C₁₆H₁₂N₂O₅, (VI), are isomorphous in space group P. In each of compounds (II)–(VI), a combination of N—H...O and O—H...O hydrogen bonds generates a chain of centrosymmetric edge‐fused R₂²(8) and R₂²(10) rings, and these chains are linked into sheets by an aromatic π–π stacking interaction. No two of the structures of (II)–(VI) exhibit the same combination of weak hydrogen bonds of C—H...O and C—H...π(arene) types. The molecules of racemic 3‐hydroxy‐3‐(2‐thienylcarbonylmethyl)indolin‐2‐one, C₁₄H₁₁NO₃S, (VII), form hydrogen‐bonded chains very similar to those in (II)–(VI), but here the sheet formation depends upon a weak π–π stacking interaction between thienyl rings. Comparisons are drawn between the crystal structures of compounds (I)–(VII) and those of some recently reported analogues having no aromatic group in the side chain.     

The synthesis of n‐substituted isothiazol‐3(2h)‐ones from nsubstituted 3‐benzoylpropionamides

N‐Substituted isothiazol‐3(2H)‐ones can be easily prepared from N‐substituted 3‐benzoylpropi‐onamides in two experimentally simple steps, in satisfactory overall yields. Reaction of the amides with excess thionyl chloride results in the formation of N‐substituted 5‐benzoylisothiazol‐3(2H)‐ones, which are readily debenzoylated with alkali to the corresponding N‐substituted isothiazol‐3(2H)‐ones. This method has now been successfully applied to the synthesis of isothiazolones N‐substituted with a bulky alkyl group, such as the tert‐butyl group, and with a phenyl group bearing either a strong electron‐withdrawing substituent, such as the 3‐nitrophenyl and 4‐nitrophenyl group, or an electron‐releasing substituent, such as the 4‐methylphenyl and 4‐methoxyphenyl group.     

Two (Z)‐N‐aryl‐3‐benzylideneisoindolin‐1‐ones

Two isoindolin‐1‐one derivatives, (Z)‐3‐benzyl­idene‐N‐phenyl­isoindolin‐1‐one, C₂₁H₁₅NO, (II), and (Z)‐3‐benzyl­idene‐N‐(4‐methoxy­phenyl)­isoindolin‐1‐one, C₂₂H₁₇NO₂, (III), were synthesized by the palladium‐catalysed heteroannulation. The mol­ecules of both compounds have a Z configuration. The interplanar angles between the five‐ and six‐membered rings of the isoindolinone moiety in (II) and (III) are 1.66 (11) and 2.26 (7)°, respectively. The phenyl rings at the N‐position in (II) and (III) are twisted out of the C₄N ring plane by 62.77 (11) and 67.10 (7)°, respectively. The substitutions at the N and C‐3 positions of the isoindolinone system have little influence on the molecular dimensions of the resulting compounds.     

Synthesis of pinacol esters of 1‐alkyl‐1H‐pyrazol‐5‐yl‐ and 1‐alkyl‐1H‐pyrazol‐4‐ylboronic acids

Starting from 1H‐pyrazol, a wide number of 1‐alkyl‐1H‐pyrazol‐4‐yl and 1‐alkyl‐1H‐pyrazol‐5‐ylboronic acids and their pinacol esters were synthesized and characterized. The key step in the described methodology is the regioselective lithiation of the pyrazole ring. The synthesized pinacolates are stable under prolonged storage and can be used as convenient reagents in organic synthesis.     

Convenient preparations of 2‐alkyl‐5‐oxopyrrolidine‐3‐carboxylic acids

Reduction of the Michael addition products of anions of nitro compounds to dimethyl maleate led to the spontaneous formation of the respective 2‐alkyl‐5‐oxopyrrolidine‐3‐carboxylic acid methyl esters. Conventional hydrolysis of the later gave the desired compounds.     

Formation of α‐SF5‐Enolate Enables Preparation of 3‐SF5‐Quinolin‐2‐ones, 3‐SF5‐Quinolines,and 3‐SF5‐Pyridin‐2‐ones: Evaluation of their Physicochemical Properties

This study describes, for the first time, the generation of a SF₅‐substituted ester enolate from benzyl SF₅‐acetate under soft enolization conditions, which in turn participates in aldol addition reactions in high yield. The reaction was applied in the synthesis of 3‐SF₅‐quinolin‐2‐ones, 3‐SF₅‐quinolines, and 3‐SF₅‐pyridin‐2‐ones, none of which have previously been reported. To provide guidelines for their use in drug discovery, the physicochemical properties of these building blocks were determined and compared with those of their CF₃‐ and t‐Bu‐analogues.     

Formation of α‐SF5‐Enolate Enables Preparation of 3‐SF5‐Quinolin‐2‐ones, 3‐SF5‐Quinolines,and 3‐SF5‐Pyridin‐2‐ones: Evaluation of their Physicochemical Properties

This study describes, for the first time, the generation of a SF₅‐substituted ester enolate from benzyl SF₅‐acetate under soft enolization conditions, which in turn participates in aldol addition reactions in high yield. The reaction was applied in the synthesis of 3‐SF₅‐quinolin‐2‐ones, 3‐SF₅‐quinolines, and 3‐SF₅‐pyridin‐2‐ones, none of which have previously been reported. To provide guidelines for their use in drug discovery, the physicochemical properties of these building blocks were determined and compared with those of their CF₃‐ and t‐Bu‐analogues.     

Ethyl[tris(3‐tert‐butyl‐5‐methylpyrazol‐1‐yl)hydridoborato]zinc(II)

The X‐ray crystal structure of the title compound, [Zn(C₂H₅)(C₂₄H₄₀BN₆)], or Tp^tBu,MeZnEt [Tp^tBu,Me is tris(3‐tert‐butyl‐5‐methylpyrazolyl)hydridoborate], reveals a distorted tetrahedral geometry around the Zn atom. The Zn center is coordinated by three N atoms of the borate ligand and by one C atom of the ethyl group. The present structure and other tetrahedral Tp zinc alkyl complexes are compared with similar Ttz ligands (Ttz is 1,2,4‐triazolylborate), but no major differences in the structures are noted, and it can be assumed that variation of the substitution pattern of Tp or Ttz ligands has little or no influence on the geometry of alkylzinc complexes. Refinement of the structure is complicated by a combination of metric pseudosymmetry and twinning. The metrics of the structure could also be represented in a double‐volume C‐centered orthorhombic unit cell, and the structure is twinned by one of the orthorhombic symmetry operators not present in the actual structure. The twinning lies on the borderline between pseudomerohedral and nonmerohedral. The data were refined as being nonmerohedrally twinned, pseudomerohedrally twinned and untwinned. None of the approaches yielded results that were unambiguously better than any of the others: the best fit between structural model and data was observed using the nonmerohedral approach which also yielded the best structure quality indicators, but the data set is less than 80% complete due to rejected data. The pseudomerohedral and the untwinned structures are complete, but relatively large residual electron densities that are not close to the metal center are found with values up to three times higher than in the nonmerohedral approach.     

3‐(α‐Chlorobenzyl)quinoxalin‐2(1H)‐ones as Versatile Reagents for the Synthesis of 3‐Benzylquinoxalin‐2(1H)‐ones and Thiazolo[3,4‐a]quinoxalin‐4(5H)‐ones

Facile and efficient methods for the synthesis of 3‐benzylquinoxalin‐2(1H)‐ones and thiazolo[3,4‐a]quinoxalin‐4(5H)‐ones by the reaction of the readily available 3‐(α‐chlorobenzyl)quinoxalin‐2(1H)‐ones and thiourea have been developed, with multiple roles of the latter. Possible mechanisms are discussed. These two‐step sequences can be performed in a one‐pot manner to produce the desired products in moderate to high yields.     

Structure analysis of some α‐(n‐methyl‐n‐formylaminomethyl)‐quinolines

The ¹H and ¹³C nmr spectra of the rotational isomers 3a and 3b of 6‐N‐methyl‐N‐formylaminomefhyl)‐thioquinanthrene were completely assigned with a combination of 1D and 2D nmr techniques. The key‐parts of this methodology were long‐range proton‐carbon correlations and NOE experiments with N‐methyl‐N‐formylaminomethyl substituent. The X‐ray study of 4‐methyl‐2‐N‐methyl‐N‐formylaminomethyl)quinoline 4a as well as ¹H and ¹³C nmr spectra show that N‐methyl‐N‐formylaminomethyl substituent in 4a and 4b has a different steric arrangement than the same substituent in 3a and 3b .     

Dimethyldioxirane epoxidation of 3‐aryl‐1‐(3‐coumarinyl)propen‐1‐ones

Regioselective epoxidation of 3‐aryl‐1‐(3‐coumarinyl)propen‐1‐ones 1–10 by isolated dimethyldioxirane afforded the appropriate epoxides 11–20 in high (76–87%) yields.     

A unique tautomer of 1‐n‐hexyl‐3‐phenyl‐1H‐pyrazol‐5‐ol

In the title compound, C₁₅H₂₀N₂O, the bond distances and angles are consistent with the presence of the hydroxy tautomer. This tautomer was unambiguously determined by the clear presence of a H atom bonded to oxygen, as well as the total absence of any residual electron density around the N atom in the heterocycle, thus precluding any possibility of desmotropism.     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000     

New routes to 1‐functionally substituted arylbenzotriazoles: 3‐Benzotriazol‐1‐yl‐pyridazine‐4‐ones, 5‐benzotriazol‐1‐yl‐pyridazine‐6‐ones and 5‐benzotriazol‐1‐yl‐pyridazine‐6‐imines

Condensation of 1‐arylhydrazono‐1‐benzotriazol‐1‐yl 2‐propanones ( 5a‐c ) with DMF DMA afforded 1‐aryl‐3‐benzotriazol‐1‐yl‐1,4‐dihydropyridazine‐4‐ones ( 8a‐c ). While condensation of 1‐functionally substituted methylbenzotriazoles 3b,c with 2‐arylhydrazono‐3‐oxoarylpropanal 13a,b give 3‐aroyl‐5‐(benzo‐triazolyl‐1‐yl)‐1,6‐dihydro‐1‐phenylpyridazine‐6‐ones and 6‐imines 14a‐d.     

A facile synthesis of 1‐alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines

1‐Alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines were synthesized by the alkylation of 1‐alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines with arylalkyl halide in the presence of potassium carbonate. 1‐Alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines as key precursor prepared from o‐vaniline via 6 steps.     

Rhodium(I)‐Catalyzed Reductive Cyclocarbonylation of Internal Alkynes: Atom‐Economic Process for Synthesis of 2‐Cyclopenten‐1‐ones, 5‐Alkylidenefuran‐2(5 H)‐ones and Indan‐1‐ones

Economical atoms : 2‐Cyclopenten‐1‐ones, 5‐alkylidenefuran‐2(5 H)‐ones and indan‐1‐ones have been synthesized by atom‐economic reductive cyclocarbonylation of internal alkynes with carbon monoxide catalyzed by [{RhCl(CO)₂}₂]/CO(NH₂)₂ in the presence of water (see scheme).

     

Synthesis of 1‐substituted 5‐aryl‐3‐(3‐coumarinyl)‐2‐pyrazolines by the reaction of 3‐aryl‐1‐(3‐coumarinyl)propen‐1‐ones with hydrazines

1‐Acetyl‐ and 1‐propionyl‐2‐pyrazolines 11‐27 have been synthesized by the reaction of (3‐coumarinyl)chalcones 1‐10 with hydrazine in hot acetic acid or propionic acid. While 5‐aryl‐3‐(3‐coumarinyl)‐1‐phenyl‐2‐pyrazolines 28‐35 have been prepared by the reaction of (3‐coumarinyl)chalcones 1,3,5‐10 with phenylhydrazine in hot pyridine. Structures of all new compounds have been elucidated by microanalyses, ¹H and ¹³C nmr spectroscopies.     

Regio‐ and stereoselective synthesis of spiro[1‐benzothiepine‐4(5h), 3′(3h)‐pyrazol]‐5‐ones

Reaction of (4E)‐4‐arylmethylene‐3,4‐dihydro‐1‐benzothiepin‐5(2H)‐ones 3a‐e with nitrilimines (generated in situ via triethylamine dehydrohalogenation of the corresponding hydrazonoyl chlorides 4a, b ) in refluxing benzene, afforded 2′,4′,5′‐triaryl‐2,2′,3,4′‐tetrahydro‐spiro[1‐benzothiepine‐4(5H),3′(3H)‐pyrazol]‐5‐ones 5a‐i and not the isomeric forms spiro[1‐benzothiepine‐4(5H),4′(4H)‐pyrazol]‐5‐ones 6 in high regioselective manner. Single crystal X‐ray diffraction studies of 5a, f, g indicated that the isolated products are 3′R, 4′ S.