ZnF2-Riched Inorganic/Organic Hybrid SEI: in situ-Chemical Construction and Performance-Improving Mechanism for Aqueous Zinc-ion Batteries

Uncontrolled dendrites growth and serious parasitic reactions in aqueous electrolytes, greatly hinder the practical application of aqueous zinc-ion battery. On the basis of in situ-chemical construction and performance-improving mechanism, multifunctional fluoroethylene carbonate (FEC) is introduced into aqueous electrolyte to construct a high-quality and ZnF₂-riched inorganic/organic hybrid SEI (ZHS) layer on Zn metal anode (ZMA) surface. Notably, FEC additive can regulate the solvated structure of Zn²⁺ to reduce H₂O molecules reactivity. Additionally, the ZHS layer with strong Zn²⁺ affinity can avoid dendrites formation and hinder the direct contact between the electrolyte and anode. Therefore, the dendrites growth, Zn corrosion, and H₂ evolution reaction on ZMA in FEC-included ZnSO₄ electrolyte are highly suppressed. Thus, ZMA in such electrolyte realize a long cycle life over 1000 h and deliver a stable coulombic efficiency of 99.1 % after 500 cycles.     

High-Capacity Zinc Anode with 96 % Utilization Rate Enabled by Solvation Structure Design

Aqueous zinc-ion batteries (AZBs) show promises for large-scale energy storage. However, the zinc utilization rate (ZUR) is generally low due to side reactions in the aqueous electrolyte caused by the active water molecules. Here, we design a novel solvation structure in the electrolyte by introduction of sulfolane (SL). Theoretical calculations, molecular dynamics simulations and experimental tests show that SL remodels the primary solvation shell of Zn²⁺, which significantly reduces the side reactions of Zn anode and achieves high ZUR under large capacities. Specifically, the symmetric and asymmetric cells could achieve a maximum of ∼96 % ZUR at an areal capacity of 24 mAh cm⁻². In a ZUR of ∼67 %, the developed Zn−V₂O₅ full cell can be stably cycled for 500 cycles with an energy density of 180 Wh kg⁻¹ and Zn-AC capacitor is stable for 5000 cycles. This electrolyte structural engineering strategy provides new insight into achieving high ZUR of Zn anodes for high performance AZBs.     

Hydrophobic Organic-Electrolyte-Protected Zinc Anodes for Aqueous Zinc Batteries

Aqueous Zn batteries are promising energy-storage devices. However, their lifespan is limited by irreversible Zn anodes owing to water decomposition and Zn dendrite growth. Here, we separate aqueous electrolyte from Zn anode by coating a thin MOF layer on anode and filling the pores of MOF with hydrophobic Zn(TFSI)₂-tris(2,2,2-trifluoroethyl)phosphate (TFEP) organic electrolyte that is immiscible with aqueous Zn(TFSI)₂–H₂O bulk electrolyte. The MOF encapsulated Zn(TFSI)₂-TFEP forms a ZnF₂-Zn₃(PO₄)₂ solid electrolyte interphase (SEI) preventing Zn dendrite and water decomposition. The Zn(TFSI)₂-TFEP@MOF electrolyte protected Zn anode enables a Zn||Ti cell to achieve a high average Coulombic efficiency of 99.1 % for 350 cycles. The highly reversible Zn anode brings a high energy density of 210 Wh kg⁻¹ (of cathode and anode mass) and a low capacity decay rate of 0.0047 % per cycle over 600 cycles in a Zn||MnO₂ full cell with a low capacity ratio of Zn:MnO₂ at 2:1.     

Steric-hindrance Effect Tuned Ion Solvation Enabling High Performance Aqueous Zinc Ion Batteries

Despite many additives have been reported for aqueous zinc ion batteries, steric-hindrance effect of additives and its correlation with Zn²⁺ solvation structure have been rarely reported. Herein, large-sized sucrose biomolecule is selected as a paradigm additive, and steric-hindrance electrolytes (STEs) are developed to investigate the steric-hindrance effect for solvation structure regulation. Sucrose molecules do not participate in Zn²⁺ solvation shell, but significantly homogenize the distribution of solvated Zn²⁺ and enlarge Zn²⁺ solvation shell with weakened Zn²⁺−H₂O interaction due to the steric-hindrance effect. More importantly, STEs afford the water-shielding electric double layer and in situ construct the organic and inorganic hybrid solid electrolyte interface, which effectively boost Zn anode reversibility. Remarkably, Zn//NVO battery presents high capacity of 3.9 mAh ⋅ cm⁻² with long cycling stability for over 650 cycles at lean electrolyte of 4.5 μL ⋅ mg⁻¹ and low N/P ratio of 1.5, and the stable operation at wide temperature (−20 °C~+40 °C).     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².     

Localized Anion-Cation Aggregated Aqueous Electrolytes with Accelerated Kinetics for Low-Temperature Zinc Metal Batteries

Aqueous zinc metal batteries hold great promise for large-scale energy storage because of their high safety, rich material resources and low cost. However, the freeze of aqueous electrolytes hinders low-temperature operation of the batteries. Here, aqueous localized anion-cation aggregated electrolytes composed of Zn(BF₄)₂ as the salt and tetrahydrofuran (THF) as the diluent, are developed to improve the low-temperature performance of the Zn anode. THF promotes the inclusion of BF₄⁻ in the solvation sheath of Zn²⁺, facilitating the formation of ZnF₂-rich solid-electrolyte-interphase. THF also affects the hydrogen bonding between neighboring H₂O molecules, effectively lowering the freezing point. Therefore, the full cells of Zn||polyaniline (PANI) exhibit an ultralong cycle life of 8000 cycles with an average Coulombic efficiency of 99.99 % at −40 °C. Impressively, the pouch cells display a high capacity retention of 86.2 % after 500 cycles at −40 °C, which demonstrates the great prospect of such electrolytes in cold regions. This work provides new insights for the design of low-temperature aqueous electrolytes.     

Manipulating Electric Double Layer Adsorption for Stable Solid-Electrolyte Interphase in 2.3 Ah Zn-Pouch Cells

Constructing a reliable solid-electrolyte interphase (SEI) is imperative for enabling highly reversible zinc metal (Zn⁰) electrodes. Contrary to conventional “bulk solvation” mechanism, we found the SEI structure is dominated by electric double layer (EDL) adsorption. We manipulate the EDL adsorption and Zn²⁺ solvation with ether additives (i.e. 15-crown-5, 12-crown-4, and triglyme). The 12-crown-4 with medium adsorption on EDL leads to a layer-structured SEI with inner inorganic ZnF_x/ZnS_x and outer organic C−O−C components. This structure endows SEI with high rigidness and strong toughness enabling the 100 cm² Zn||Zn pouch cell to exhibit a cumulative capacity of 4250 mAh cm⁻² at areal-capacity of 10 mAh cm⁻². More importantly, a 2.3 Ah Zn||Zn_0.25V₂O₅⋅n H₂O pouch cell delivers a recorded energy density of 104 Wh L_cell⁻¹ and runs for >70 days under the harsh conditions of low negative/positive electrode ratio (2.2 : 1), lean electrolyte (8 g Ah⁻¹), and high-areal-capacity (≈13 mAh cm⁻²).     

Boosting Zn Anode Utilization by Trace Iodine Ions in Organic-Water Hybrid Electrolytes through Formation of Anion-rich Adsorbing Layers

Aqueous Zn batteries are attracting extensive attentions, but their application is still hindered by H₂O-induced Zn-corrosion and hydrogen evolution reactions. Addition of organic solvents into aqueous electrolytes to limit the H₂O activity is a promising solution, but at the cost of greatly reduced Zn anode kinetics. Here we propose a simple strategy for this challenge by adding 50 mM iodine ions into an organic-water (1,2-dimethoxyethane (DME)+water) hybrid electrolyte, which enables the electrolyte simultaneously owns the advantages of low H₂O activity and accelerated Zn kinetics. We demonstrate that the DME breaks the H₂O hydrogen-bond network and exclude H₂O from Zn²⁺ solvation shell. And the I⁻ is firmly adsorbed on the Zn anode, reducing the Zn²⁺ de-solvation barrier from 74.33 kJ mol⁻¹ to 32.26 kJ mol⁻¹ and inducing homogeneous nucleation behavior. With such electrolyte, the Zn//Zn symmetric cell exhibits a record high cycling lifetime (14.5 months) and achieves high Zn anode utilization (75.5 %). In particular, the Zn//VS₂@SS full cell with the optimized electrolyte stably cycles for 170 cycles at a low N : P ratio (3.64). Even with the cathode mass-loading of 16.7 mg cm⁻², the full cell maintains the areal capacity of 0.96 mAh cm⁻² after 1600 cycles.     

Engineering Fluorine-rich Double Protective Layer on Zn Anode for Highly Reversible Aqueous Zinc-ion Batteries

The high thermodynamic instability and side reactions of Zn-metal anode (ZMA), especially at high current densities, greatly impede the commercialization of aqueous zinc-ion batteries (AZIBs). Herein, a fluorine-rich double protective layer strategy is proposed to obtain the high reversibility of AZIBs through the introduction of a versatile tetradecafluorononane-1,9-diol (TDFND) additive in aqueous electrolyte. TDFND molecule with large adsorption energy (−1.51 eV) preferentially absorbs on the Zn anode surface to form a Zn(OR)₂⁻ (R=−CH₂−(CF₂)₇−CH₂−) cross-linking complex network, which balances space electric field and controls the Zn²⁺ ion flux, thus enabling the uniform and compact deposition of Zn (002) crystal planes. Meanwhile, TDFND with low Lowest unoccupied molecular orbital (LUMO, 0.10 eV) energy level is priorly decomposed to regulate the interfacial chemistry of ZMA by building a ZnF₂-rich solid electrode/electrolyte interface (SEI) layer. It is found that a 14 nm-thick SEI layer delivers excellent structural integrity to suppress parasitic reactions by blocking the direct contact of active water and ZMA. Consequently, the Zn electrode exhibits a superior cycling life over 430 h at 10 mA cm⁻² and a high average Coulombic efficiency of 99.8 % at 5 mA cm⁻². Furthermore, a 68 mAh pouch cell delivers 80.3 % capacity retention for 1000 cycles.     

The Construction of Anion-Induced Solvation Structures in Low-concentration Electrolyte for Stable Zinc Anodes

Aqueous zinc-ion batteries (ZIBs) are promising large-scale energy storage devices because of their low cost and high safety. However, owing to the high activity of H₂O molecules in electrolytes, hydrogen evolution reaction and side reactions usually take place on Zn anodes. Herein, additive-free PCA−Zn electrolyte with capacity of suppressing the activity of free and solvated H₂O molecules was designed by selecting the cationophilic and solventophilic anions. In such electrolyte, contact ion-pairs and solvent-shared ion-pairs were achieved even at low concentration, where PCA⁻ anions coordinate with Zn²⁺ and bond with solvated H₂O molecules. Simultaneously, PCA⁻ anions also induce the construction of H-bonds between free H₂O molecules and them. Therefore, the activity of free and solvated H₂O molecules is effectively restrained. Furthermore, since PCA⁻ anions possess a strong affinity with metal Zn, they can also adsorb on Zn anode surface to protect Zn anode from the direct contact of H₂O molecules, inhibiting the occurrence of water-triggered side reactions. As a result, plating/stripping behavior of Zn anodes is highly reversible and the coulombic efficiency can reach to 99.43 % in PCA−Zn electrolyte. To illustrate the feasibility of PCA−Zn electrolyte, the Zn||PANI full batteries were assembled based on PCA−Zn electrolyte and exhibited enhanced cycling performance.     

Synchronous Dual Electrolyte Additive Sustains Zn Metal Anode with 5600 h Lifespan

Despite conspicuous merits of Zn metal anodes, the commercialization is still handicapped by rampant dendrite formation and notorious side reaction. Manipulating the nucleation mode and deposition orientation of Zn is a key to rendering stabilized Zn anodes. Here, a dual electrolyte additive strategy is put forward via the direct cooperation of xylitol (XY) and graphene oxide (GO) species into typical zinc sulfate electrolyte. As verified by molecular dynamics simulations, the incorporated XY molecules could regulate the solvation structure of Zn²⁺, thus inhibiting hydrogen evolution and side reactions. The self-assembled GO layer is in favor of facilitating the desolvation process to accelerate reaction kinetics. Progressive nucleation and orientational deposition can be realized under the synergistic modulation, enabling a dense and uniform Zn deposition. Consequently, symmetric cell based on dual additives harvests a highly reversible cycling of 5600 h at 1.0 mA cm⁻²/1.0 mAh cm⁻².     

Solvation Modulation Enhances Anion-Derived Solid Electrolyte Interphase for Deep Cycling of Aqueous Zinc Metal Batteries

Stable Zn anodes with a high utilization efficiency pose a challenge due to notorious dendrite growth and severe side reactions. Therefore, electrolyte additives are developed to address these issues. However, the additives are always consumed by the electrochemical reactions over cycling, affecting the cycling stability. Here, hexamethylphosphoric triamide (HMPA) is reported as an electrolyte additive for achieving stable cycling of Zn anodes. HMPA reshapes the solvation structures and promotes anion decomposition, leading to the in situ formation of inorganic-rich solid-electrolyte-interphase. More interestingly, this anion decomposition does not involve HMPA, preserving its long-term impact on the electrolyte. Thus, the symmetric cells with HMPA in the electrolyte survive ≈500 h at 10 mA cm⁻² for 10 mAh cm⁻² or ≈200 h at 40 mA cm⁻² for 10 mAh cm⁻² with a Zn utilization rate of 85.6 %. The full cells of Zn||V₂O₅ exhibit a record-high cumulative capacity even under a lean electrolyte condition (E/C ratio=12 μL mAh⁻¹), a limited Zn supply (N/P ratio=1.8) and a high areal capacity (6.6 mAh cm⁻²).     

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H₂O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H₂O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn²⁺ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)²⁺) mechanism, and the intercalated TMS works as a “pillar” that provides more zincophilic sites and stabilizes the structure of cathode (NH₄V₄O₁₀, (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g⁻¹ at a low current density of 0.2 A g⁻¹ for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.     

High-entropy Electrolyte Enables High Reversibility and Long Lifespan for Magnesium Metal Anodes

The stable cycling of Mg-metal anodes is limited by several problems, including sluggish electrochemical kinetics and passivation at the Mg surface. In this study, we present a high-entropy electrolyte composed of lithium triflate (LiOTf) and trimethyl phosphate (TMP) co-added to magnesium bis(trifluoromethane sulfonyl)imide (Mg(TFSI)₂/1,2-dimethoxyethane (DME) to significantly improve the electrochemical performance of Mg-metal anodes. The as-formed high-entropy Mg²⁺-2DME-OTf⁻-Li⁺-DME-TMP solvation structure effectively reduced the Mg²⁺-DME interaction in comparison with that observed in traditional Mg(TFSI)₂/DME electrolytes, thereby preventing the formation of insulating components on the Mg-metal anode and promoting its electrochemical kinetics and cycling stability. Comprehensive characterization revealed that the high-entropy solvation structure brought OTf⁻ and TMP to the surface of the Mg-metal anode and promoted the formation of a Mg₃(PO₄)₂-rich interfacial layer, which is beneficial for enhancing Mg²⁺ conductivity. Consequently, the Mg-metal anode achieved excellent reversibility with a high Coulombic efficiency of 98 % and low voltage hysteresis. This study provides new insights into the design of electrolytes for Mg-metal batteries.     

Inhibiting VOPO4⋅x H2O Decomposition and Dissolution in Rechargeable Aqueous Zinc Batteries to Promote Voltage and Capacity Stabilities

VOPO₄?x H₂O has been proposed as a cathode for rechargeable aqueous zinc batteries. However, it undergoes significant voltage decay in conventional Zn(OTf)₂ electrolyte. Investigations show the decomposition of VOPO₄?x H₂O into VO_x in the electrolyte and voltage drops after losing the inductive effect from polyanions.PO₄^3? was thus added to shift the decomposition equilibrium. A high concentration of cheap, highly soluble ZnCl₂ salt in the electrolyte further prevents VOPO₄?x H₂O dissolution. The cathode shows stable capacity and voltage retentions in 13 m ZnCl₂/0.8 m H₃PO₄ aqueous electrolyte, in direct contrast to that in Zn(OTf)₂ where the decomposition product VO_x provides most electrochemical activity over cycling. Sequential H⁺ and Zn²⁺ intercalations into the structure are revealed, delivering a high capacity (170 mAh g^?1). This work shows the potential issue with polyanion cathodes in zinc batteries and proposes an effective solution using fundamental chemical principles.     

Amphoteric Cellulose-Based Double-Network Hydrogel Electrolyte Toward Ultra-Stable Zn Anode

Zinc (Zn) metal anode suffers from uncontrollable Zn dendrites and parasitic side reactions at the interface, which restrict the practical application of aqueous rechargeable zinc batteries (ARZBs). Herein, an amphoteric cellulose-based double-network is introduced as hydrogel electrolyte to overcome these obstacles. On one hand, the amphoteric groups build anion/cation transport channels to regulate electro-deposition behavior on Zn (002) crystal plane enabled by homogenizing Zn²⁺ ions flux. On the other hand, the strong bonding between negatively charged carboxyl groups and Zn²⁺ ions promote the desolvation process of [Zn(H₂O)₆]²⁺ to eliminate side reactions. Based on the above two functions, the hydrogel electrolyte enables an ultra-stable cycling with a cumulative capacity of 7 Ah cm⁻² at 20 mA cm⁻²/20 mAh cm⁻² for Zn||Zn cell. This work provides significant concepts for developing hydrogel electrolytes to realize stable anode for high-performance ARZBs.     

An in-depth mechanistic insight into the redox reaction and degradation of aqueous Zn-MnO2 batteries

Rechargeable aqueous Zn/MnO₂ batteries raise massive research activities in recent years. However, both the working principle and the degradation mechanism of this battery chemistry are still under debate. Herein, we provide an in-depth electrochemical and structural investigation on this controversial issue based on α-MnO₂ crystalline nanowires. Mechanistic analysis substantiates a two-electron reaction pathway of Mn²⁺/Mn⁴⁺ redox couple from part of MnO₂ accompanying with a reversible precipitation/dissolution of flaky zinc sulfate hydroxide (ZSH) during the discharge/charge processes. The formation of the ZSH layer is double-edged, which passivates the deep dissolution of MnO₂ upon discharging, but promotes the electrochemical deposition kinetics of active MnO₂ upon charging. The cell degradation originates primarily from the corrosion failure of metallic zinc anode and the accumulation of irreversible ZnMn₂O₄ phases on the cathode. The addition of MnSO₄ to the electrolyte could afford supplementary capacity contribution via electro-oxidation of Mn²⁺. However, a high MnSO₄ concentration will expedite the cell failure by corroding the metallic zinc anodes. The present study will shed a fundamental insight on developing new strategies toward practically viable Zn/MnO₂ batteries.     

Constructing a Super‐Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re‐evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super‐saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super‐saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm^?2, near 55‐times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g^?1 and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm^?2.     

A single-ion conducting covalent organic framework for aqueous rechargeable Zn-ion batteries

Despite their potential as promising alternatives to current state-of-the-art lithium-ion batteries, aqueous rechargeable Zn-ion batteries are still far away from practical applications. Here, we present a new class of single-ion conducting electrolytes based on a zinc sulfonated covalent organic framework (TpPa-SO₃Zn_0.5) to address this challenging issue. TpPa-SO₃Zn_0.5 is synthesised to exhibit single Zn²⁺ conduction behaviour via its delocalised sulfonates that are covalently tethered to directional pores and achieve structural robustness by its β-ketoenamine linkages. Driven by these structural and physicochemical features, TpPa-SO₃Zn_0.5 improves the redox reliability of the Zn metal anode and acts as an ionomeric buffer layer for stabilising the MnO₂ cathode. Such improvements in the TpPa-SO₃Zn_0.5–electrode interfaces, along with the ion transport phenomena, enable aqueous Zn–MnO₂ batteries to exhibit long-term cyclability, demonstrating the viability of COF-mediated electrolytes for Zn-ion batteries.

A zinc sulfonated covalent organic framework is presented as a new single-ion conducting electrolyte for aqueous rechargeable Zn-ion batteries.