Chemo-selective cross reaction of two enals via carbene-catalyzed dual activation

A dual catalytic chemo-selective cross-coupling reaction of two enals is developed. One enal (without α-substitution) is activated by an NHC catalyst to form an acylazolium enolate intermediate that undergoes Michael-type addition to another enal molecule bearing an alkynyl substituent. Mechanistic studies indicate that non-covalent interactions between the alkynyl enal and the NHC·HX catalyst play important roles in substrate activation and enantioselectivity control. Many of the possible side reactions are not observed. Our reaction provides highly chemo- and diastereo-selective access to chiral lactones containing functionalizable 1,3-enyn units with excellent enantioselectivities (95 to >99% ee).

An NHC-catalyzed dual activation of two different enals is disclosed with both covalent and non-covalent activation pathways involved.

The development of chemo-selective reactions of two or more substrates bearing similar functional groups remains a classic challenge in organic synthesis.¹ Enals (α,β-unsaturated aldehydes) are common building blocks that offer multiple useful modes of reactions. For instance, enals are readily used as Michael acceptors in many reactions including organic catalytic reactions mediated by amines.² In the area of N-heterocyclic carbene (NHC) organocatalysis,³ enals are used as precursors of several NHC-bound intermediates, including Breslow acyl anion intermediates,⁴ homoenolate intermediates,⁵ enolate intermediates,⁶ and acylazolium intermediates.⁷ Somewhat surprisingly, on the other hand, there is little success in using enals as Michael acceptors to react with any of these NHC-bound intermediates.⁸ Elegant studies in this direction are from Scheidt, in which they showed that in the presence of an NHC catalyst, a homo coupling reaction of enals (with one enal molecule as the Michael acceptor) occurred effectively (Fig. 1a, top side).^8a,c Berkessel reported an intramolecular reaction of two enal moieties (in one molecule) to form a bicyclic lactone adduct in the presence of an achiral NHC catalyst (Fig. 1a, bottom side).^8b To the best of our knowledge, the intermolecular Michael addition reaction of two different enal substrates mediated by NHC catalysts has not been reported.⁹ Possible reasons for the difficulties of enals to behave as effective Michael acceptors likely include: (a) the relatively low electrophilicity of the α,β-unsaturated bonds of enals under the typical NHC catalytic conditions and (b) the presence of competing reactions involving both the alkene and aldehyde moieties of enals.Open in a separate windowFig. 1NHC-catalyzed reactions (a) with enals as Michael acceptors, (b) via cross intermolecular reactions of two enals, and (c) bio-active molecules bearing alkyne units.Here we disclose the first cross intermolecular reaction of two enals catalyzed by NHC catalysts (Fig. 1b). We envisioned that installation of an alkynyl substituent at the α-position of an enal can likely promote its reactivity as a Michael acceptor.¹⁰ The presence of an α-substituent can interrupt π-conjugations and thus minimize its reactivity via the corresponding enal-derived enolate/homoenolate intermediate formed with NHC, as shown by Bode, Glorius and others.^6b,11 In addition, the alkynyl substituent can promote hydrogen-bonding interactions to increase the electrophilicity of the enal to react as a Michael acceptor, as observed in Jørgensen''s amine-catalyzed reactions.¹² In our present study, a non-linear effect was observed regarding enantiomeric excesses of the NHC catalyst and the catalytic reaction product. The reaction enantioselectivity was also found to be sensitive to solvents and bases. These results suggested that the NHC and its azolium salt pre-catalyst (NHC·HX) played dual roles in our reaction: one is to activate the α-unsubstituted enal via the formation of the NHC-bound enolate intermediate,⁶ the other is to activate the α-alkynyl substituted enal via the acidic proton of the chiral NHC·HX (Fig. 1b, intermediate I & transition state TS-I).¹³ With respect to applications, carbon–carbon triple bonds are found in a good number of bioactive molecules such as cleviolide, (+)-prelaureatin, and oxamflatin (Fig. 1c).¹⁴ We demonstrated that our products containing these alkynyl units could be readily transformed into a diverse set of molecules.Cinnamaldehyde 1a and α-alkynyl enal 2a were chosen as the model substrates to search for suitable cross coupling reaction conditions (Table 1). The reactions were first carried out with Et₃N as the base and THF as the solvent. When aminoindanol derived azoium salt A¹⁵ was used as the NHC pre-catalyst, the desired formal [4 + 2] product (3a) was obtained in a very encouraging yield (52%) with excellent ee and dr values (entry 1). The reactions appeared to be very sensitive to the structure of the NHC pre-catalysts, as similar azolium salts with N-phenyl or N–C₆F₅ substituents (B¹⁶ and C¹⁷) were completely ineffective, leading to no product formation (entries 2 & 3). Additional studies on the NHC pre-catalysts finally revealed that introduction of a Br substituent in the indane phenyl ring of the catalyst (D)¹⁸ led to 3a in 85% yield with 99% ee as nearly a single diastereomer (entry 4). Replacing Et₃N with DIEA led to similar results (entry 5). Very interestingly, when the bases were replaced with DABCO or K₃PO₄, a significant drop in the enantioselectivity was observed (entries 6 & 7; see the ESI^† for more details). Changing the solvent from THF to CHCl₃ or EtOAc has moderate effects on reaction yields (entries 8 & 9).Optimization of reaction conditions^a

Difluorination of α-(bromomethyl)styrenes via I(I)/I(III) catalysis: facile access to electrophilic linchpins for drug discovery

Simple α-(bromomethyl)styrenes can be processed to a variety of 1,1-difluorinated electrophilic building blocks via I(I)/I(III) catalysis. This inexpensive main group catalysis strategy employs p-TolI as an effective organocatalyst when combined with Selectfluor® and simple amine·HF complexes. Modulating Brønsted acidity enables simultaneous geminal and vicinal difluorination to occur, thereby providing a platform to generate multiply fluorinated scaffolds for further downstream derivatization. The method facilitates access to a tetrafluorinated API candidate for the treatment of amyotrophic lateral sclerosis. Preliminary validation of an enantioselective process is disclosed to access α-phenyl-β-difluoro-γ-bromo/chloro esters.

Simple α-(bromomethyl)styrenes can be processed to a variety of 1,1-difluorinated electrophilic building blocks via I(I)/I(III) catalysis.

Structural editing with fluorine enables geometric and electronic variation to be explored in functional small molecules whilst mitigating steric drawbacks.¹ This expansive approach to manipulate structure–function interplay continues to manifest itself in bio-organic and medicinal chemistry.² Of the plenum of fluorinated motifs commonly employed, the geminal difluoromethylene group³ has a venerable history.⁴ This is grounded in the structural as well as electronic ramifications of CH₂ → CF₂ substitution, as is evident from a comparison of propane and 2,2-difluoropropane (Fig. 1, upper). Salient features include localized charge inversion (C–H^δ+ to C–F^δ−) and a widening of the internal angle from 112° to 115.4°.⁵ Consequently, geminal difluoromethylene groups feature prominently in the drug discovery repertoire⁶ to mitigate oxidation and modulate physicochemical parameters. Catalysis-based routes to generate electrophilic linchpins that contain the geminal difluoromethylene unit have thus been intensively pursued, particularly in the realm of main group catalysis.^7–9 Motivated by the potential of this motif in contemporary medicinal chemistry, it was envisaged that an I(I)/I(III) catalysis platform could be leveraged to convert simple α-(bromomethyl)styrenes to gem-difluorinated linchpins: the primary C(sp³)–Br motif would facilitate downstream synthetic manipulations (Fig. 1, lower). To that end, p-TolI would function as a catalyst to generate p-TolIF₂in situ in the presence of an external oxidant¹⁰ and an amine·HF complex. Alkene activation (I) with subsequent bromonium ion formation (II)¹¹ would provide a pre-text for the first C–F bond forming process (III) with regeneration of the catalyst. A subsequent phenonium ion rearrangement¹²/fluorination sequence (III and IV) would furnish the geminal difluoromethylene group and liberate the desired electrophilic building block.Open in a separate windowFig. 1The geminal difluoromethylene group: bioisosterism, and catalysis-based access from α-(bromomethyl)styrenes via I(I)/I(III) catalysis.To validate this conceptual framework, a short process of reaction optimization (1a → 2a) was conducted to assess the influence of solvent, amine·HF ratio (Brønsted acidity)¹³ and catalyst loading (Table 1). Initial reactions were performed with p-TolI (20 mol%), Selectfluor® (1.5 equiv.) as an oxidant, and CHCl₃ as the reaction medium. Variation of the amine : HF ratio was conducted to explore the influence of Brønsted acidity on catalysis efficiency (entries 1–4). An optimal ratio of 1 : 6 was observed enabling the product 2a to be generated in >95% NMR-yield. Although reducing the catalyst loading to 10 and 5 mol% (entries 5 and 6, respectively) led to high levels of efficiency (79% yield with 5 mol%), the remainder of the study was performed with 20 mol% p-TolI. Notably, catalytic vicinal difluorination was not observed at any point during this optimization, in contrast with previous studies from our laboratory.^9d,i A solvent screen revealed the importance of chlorinated solvents (entries 7 and 8): in contrast, performing the reaction in ethyl trifluoroacetate (ETFA) and acetonitrile resulted in a reduction in yield (9 and 10). Finally, a control reaction in the absence of p-TolI confirmed that an I(I)/I(III) manifold was operational (entry 11). An expanded optimization table is provided in the ESI.^†Reaction optimization^a

Nickel catalysis enables convergent paired electrolysis for direct arylation of benzylic C–H bonds

Convergent paired electrosynthesis is an energy-efficient approach in organic synthesis; however, it is limited by the difficulty to match the innate redox properties of reaction partners. Here we use nickel catalysis to cross-couple the two intermediates generated at the two opposite electrodes of an electrochemical cell, achieving direct arylation of benzylic C–H bonds. This method yields a diverse set of diarylmethanes, which are important structural motifs in medicinal and materials chemistry. Preliminary mechanistic study suggests oxidation of a benzylic C–H bond, Ni-catalyzed C–C coupling, and reduction of a Ni intermediate as key elements of the catalytic cycle.

A direct arylation of benzylic C–H bonds is achieved by integrating Ni-catalyzed benzyl–aryl coupling into convergent paired electrolysis.

Electrochemical organic synthesis has drawn much attention in recent years.¹ Compared to processes using stoichiometric redox agents, electrosynthesis can potentially be more selective and safe, generate less waste, and operate under milder conditions.^1b In the majority of examples, the reaction of interest occurs at one electrode (anode for oxidation or cathode for reduction), while a sacrificial reaction occurs at the counter electrode to fulfil electron neutrality.^1a,2 Paired electrolysis uses both anodic and cathodic reactions for the target synthesis, thereby maximizing energy efficiency.^1a,3 However, there are comparatively few examples of paired electrolysis for organic synthesis.^1a,3,4Paired electrolysis might be classified into three types: parallel, sequential, and convergent (Fig. 1).^1a,3a In parallel paired electrolysis (Fig. 1a), the two half reactions are simultaneous but non-interfering. In sequential paired electrolysis (Fig. 1b), a substrate is oxidized and reduced (or vice versa) sequentially. In convergent paired electrolysis (Fig. 1c), intermediates generated by the anodic and cathodic processes react with one another to yield the product.^1a,3a,4b,c,5 The activation mode of all three types of paired electrolysis is based on the innate redox reactivity of substrates. As a result, the types of reactions that could be conducted by paired electrolysis remain limited. We proposed a catalytic version of convergent paired electrolysis, where a catalyst is used to cross-couple the two intermediates generated at the two separated electrodes (Fig. 1d). Although mediators have been used in paired electrosynthesis,^3a,4c,6 catalytic coupling of anodic and cathodic intermediates remains largely undeveloped. This mode of action will leverage the power of cross-coupling to electrosynthesis, opening up a wide substrate and product space. Here we report the development of such a process, where cooperative nickel catalysis and paired electrolysis enable direct arylation of benzylic C–H bonds (Fig. 1e).Open in a separate windowFig. 1Different types of paired electrolysis: (a) parallel paired electrolysis, (b) sequential paired electrolysis, (c) convergent paired electrolysis, (d) catalytic convergent paired electrolysis and (e) this work.Our method can be used to synthesize diarylmethanes, which are important structural motifs in bioactive compounds,⁷ natural products⁸ and materials.⁹ Direct arylation of benzylic C–H bonds has been recognized as an efficient strategy to synthesize diarylmethanes, and methods using metal catalysis¹⁰ and in particular combined photoredox and transition-metal catalysis have been reported.¹¹ Electrosynthesis provides a complementary approach to these methods, with the potential advantages outlined above. The groups of Yoshida¹² and Waldvogel¹³ previously developed synthesis of diarylmethanes via a Friedel–Crafts-type reaction of a benzylic cation and a nucleophile. The benzylic cations were generated by anodic oxidation of benzylic C–H bonds.¹⁴ To avoid the overoxidation of products and to stabilize the very reactive benzylic cations, the reactions had to be conducted in two steps, where the benzylic cations generated in the anodic oxidation step had to be trapped by a reagent. We thought a Ni catalyst could be used to trap the benzyl radical to form an organonickel intermediate, which is then prone to a Ni-catalyzed C–C cross-coupling reaction. Although such a coupling scheme was unprecedented, Ni-catalyzed electrochemical reductive coupling of aryl halides was well established.¹⁵ We were also encouraged by a few recent reports of combined Ni catalysis and electrosynthesis for C–N,¹⁶ C–S,¹⁷ and C–P¹⁸ coupling reactions.We started our investigations using the reaction between 4-methylanisole 1a and 4-bromoacetophenone 2a as a test reaction (Table 1). Direct arylation of benzylic C–H bonds was challenging and was typically conducted using toluene derivatives in large excess, e.g., as a solvent.^{11a,b,11d–f} To improve the reaction efficiency, we decided to use only 3 equivalents of 4-methylanisole 1a relative to 2a. After some initial trials, we decided to conduct the reaction in an undivided cell using a constant current of 3 mA. These conditions are straightforward from a practical point of view. After screening various reaction parameters, we found that a combination of 4,4′-dimethoxy-2-2′-bipyridine (L1) and (DME)NiBr₂ as a catalyst, THF/CH₃CN (4 : 1) as a solvent, fluorine-doped tin oxide (FTO) coated glass as an anode and carbon fibre as a cathode gave a 50% GC yield of 1-(4-(4-methoxybenzyl)phenyl)ethanone 3a after 18 h (Table 1, entry 1). Extending the reaction time to 36 h improved the yield to 76% (isolated yield) (entry 2). The target products were formed in a diminished yield with other bipyridine type ligands (entries 3–5). Solvents commonly used in Ni-catalyzed cross-coupling reactions, such as DMA and DMF, were less effective (entries 7–8). Replacing carbon fibre by nickel foam or platinum foil as the cathode was detrimental to the coupling, but substantial yields were still obtained (entries 9–10). On the other hand, FTO could not be replaced as the anode. Using carbon fibre as the anode shut down the reaction (entry 11). Likewise, using Pt foil as the anode gave only a 7% GC yield (entry 12). The sensitivity of the reaction outcomes to the electrodes originates from the electrode-dependent redox properties of reaction components (see below). Additional data showing the influence of other reaction parameters such as nickel sources, current, concentration, and electrolytes are provided in the ESI (Table S1, ESI^†).Summary of the influence of key reaction parameters^a

Asymmetric total synthesis of (+)-xestoquinone and (+)-adociaquinones A and B

The asymmetric total synthesis of (+)-xestoquinone and (+)-adociaquinones A and B was achieved in 6–7 steps using an easily accessible meso-cyclohexadienone derivative. The [6,6]-bicyclic decalin B–C ring and the all-carbon quaternary stereocenter at C-6 were prepared via a desymmetric intramolecular Michael reaction with up to 97% ee. The naphthalene diol D–E ring was constructed through a sequence of Ti(Oi-Pr)₄-promoted photoenolization/Diels–Alder, dehydration, and aromatization reactions. This asymmetric strategy provides a scalable route to prepare target molecules and their derivatives for further biological studies.

The asymmetric total synthesis of (+)-xestoquinone and (+)-adociaquinones A and B was achieved in 6–7 steps using an easily accessible meso-cyclohexadienone derivative.

Various halenaquinone-type natural products with promising biological activity have been isolated from marine sponges of the genus Xestospongia¹ from the Pacific Ocean. (+)-Halenaquinone (1),^2,3 (+)-xestoquinone (2), and (+)-adociaquinones A (3) and B (4)^4,5 bearing a naphtha[1,8-bc]furan core (Fig. 1) are the most typical representatives of this family. Naturally occurring (−)-xestosaprol N (5) and O (6)^6,7 have the same structure as 3 and 4 except for a furan ring, while a naphtha[1,8-bc]furan core can also be found in fungus-isolated furanosteroids (−)-viridin (7) and (+)-nodulisporiviridin E (8)^8,9 (Fig. 1). Halenaquinone (1) was first isolated from the tropical marine sponge Xestospongia exigua² and it shows antibiotic activity against Staphylococcus aureus and Bacillus subtilis. Xestoquinone (2) and adociaquinones A (3) and B (4) were firstly isolated, respectively, from the Okinawan marine sponge Xestospongia sp.^4a and the Truk Lagoon sponge Adocia sp.,^4b and they show cardiotonic,^4a,c cytotoxic,^4b,i antifungal,⁴ⁱ antimalarial,^4j and antitumor^4l activities. These compounds inhibit the activity of pp60v-src protein tyrosine kinase,^4d topoisomerases I^4e and II,^4f myosin Ca²⁺ ATPase,^4c,g and phosphatases Cdc25B, MKP-1, and MKP-3.^4h,kOpen in a separate windowFig. 1Structure of halenaquinone-type natural products and viridin-type furanosteroids.Owing to their diverse bioactivities, the synthesis of this family of natural compounds has been extensively studied, with published pathways making use of Diels–Alder,^{3a,d,e,5a–c,e,g} furan ring transfer,^5b Heck,^{3b,c,5f,7,9b,d} palladium-catalyzed polyene cyclization,^5d Pd-catalyzed oxidative cyclization,^3f and hydrogen atom transfer (HAT) radical cyclization^9c reactions. In this study, we report the asymmetric total synthesis of (+)-xestoquinone (2), (−)-xestoquinone (2′), and (+)-adociaquinones A (3) and B (4) (Fig. 1).The construction of the fused tetracyclic B–C–D–E skeleton and the all carbon quaternary stereocenter at C-6 is a major challenge towards the total synthesis of xestoquinone (2) and adociaquinones A (3) and B (4). Based on our retrosynthetic analysis (Scheme 1), the all-carbon quaternary carbon center at C-6 of cis-decalin 12 could first be prepared stereoselectively from the achiral aldehyde 13via an organocatalytic desymmetric intramolecular Michael reaction.^10,11 The tetracyclic framework 10 could then be formed via a Ti(Oi-Pr)₄-promoted photoenolization/Diels–Alder (PEDA) reaction^12–16 of 11 and enone 12. Acid-mediated cyclization of 10 followed by oxidation state adjustment could be subsequently applied to form the furan ring A of xestoquinone (2). Finally, based on the biosynthetic pathway of (+)-xestoquinone (2)^4b,5c and our previous studies,⁷ the heterocyclic ring F of adociaquinones A (3) and B (4) could be prepared from 2via a late-stage cyclization with hypotaurine (9).Open in a separate windowScheme 1Retrosynthetic analysis of (+)-xestoquinone and (+)-adociaquinones A and B.The catalytic enantioselective desymmetrization of meso compounds has been used as a powerful strategy to generate enantioenriched molecules bearing all-carbon quaternary stereocenters.^10,11 For instance, two types of asymmetric intramolecular Michael reactions were developed using a cysteine-derived chiral amine as an organocatalyst by Hayashi and co-workers,^11a,b while a desymmetrizing secondary amine-catalyzed asymmetric intramolecular Michael addition was later reported by Gaunt and co-workers to produce enantioenriched decalin structures.^11c Prompted by these pioneering studies and following the suggested retrosynthetic pathway (Scheme 1), we first screened conditions for organocatalytic desymmetric intramolecular Michael addition of meso-cyclohexadienone 13 (Table 1) in order to form the desired quaternary stereocenter at C-6. Compound 13 was easily prepared on a gram scale via a four-step process (see details in the ESI^†).Attempts of organocatalytic desymmetric intramolecular Michael addition^a

Regioselective B(3,4)–H arylation of o-carboranes by weak amide coordination at room temperature

Palladium-catalyzed regioselective di- or mono-arylation of o-carboranes was achieved using weakly coordinating amides at room temperature. Therefore, a series of B(3,4)-diarylated and B(3)-monoarylated o-carboranes anchored with valuable functional groups were accessed for the first time. This strategy provided an efficient approach for the selective activation of B(3,4)–H bonds for regioselective functionalizations of o-carboranes.

B–H: site-selective B(3,4)–H arylations were accomplished at room temperature by versatile palladium catalysis enabled by weakly coordinating amides.

o-Carboranes, icosahedral carboranes – three-dimensional arene analogues – represent an important class of carbon–boron molecular clusters.¹ The regioselective functionalization of o-carboranes has attracted growing interest due to its potential applications in supramolecular design,² medicine,³ optoelectronics,⁴ nanomaterials,⁵ boron neutron capture therapy agents⁶ and organometallic/coordination chemistry.⁷ In recent years, transition metal-catalyzed cage B–H activation for the regioselective boron functionalization of o-carboranes has emerged as a powerful tool for molecular syntheses. However, the 10 B–H bonds of o-carboranes are not equal, and the unique structural motif renders their selective functionalization difficult, since the charge differences are very small and the electrophilic reactivity in unfunctionalized o-carboranes reduces in the following order: B(9,12) > B(8,10) > B(4,5,7,11) > B(3,6).⁸ Therefore, efficient and selective boron substitution of o-carboranes continues to be a major challenge.Recently, transition metal-catalyzed carboxylic acid or formyl-directed B(4,5)–H functionalization of o-carboranes has drawn increasing interest, since it provides an efficient approach for direct regioselective boron–carbon and boron–heteroatom bond formations (Scheme 1a),⁹ with major contributions by the groups of Xie,¹⁰ and Yan,¹¹ among others.¹² Likewise, pyridyl-directed B(3,6)–H acyloxylations (Scheme 1b),¹³ and amide-assisted B(4,7,8)–H arylations¹⁴ (Scheme 1c) have been enabled by rhodium or palladium catalysis, respectively.^15,16 Despite indisputable progress, efficient approaches for complementary site-selective functionalizations of o-carboranes are hence in high demand.¹⁷ Hence, metal-catalyzed position-selective B(3,4)–H functionalizations of o-carboranes have thus far not been reported.Open in a separate windowScheme 1Chelation-assisted transition metal-catalyzed cage B–H activation of o-carboranes.Arylated compounds represent key structural motifs in inter alia functional materials, biologically active compounds, and natural products.¹⁸ In recent years, transition metal-catalyzed chelation-assisted arylations have received significant attention as environmentally benign and economically superior alternatives to traditional cross-coupling reactions.¹⁹ Within our program on sustainable C–H activation,²⁰ we have now devised a protocol for unprecedented cage B–H arylations of o-carboranes with weak amide assistance, on which we report herein. Notable features of our findings include (a) transition metal-catalyzed room temperature B–H functionalization, (b) high levels of positional control, delivering B(3,4)-diarylated and B(3)-monoarylated o-carboranes, and (c) mechanistic insights from DFT computation providing strong support for selective B–H arylation (Scheme 1d).We initiated our studies by probing various reaction conditions for the envisioned palladium-catalyzed B–H arylation of o-carborane amide 1a with 1-iodo-4-methylbenzene (2a) at room temperature (Tables 1 and S1^†). We were delighted to observe that the unexpected B(3,4)-di-arylated product 3aa was obtained in 59% yield in the presence of 10 mol% Pd(OAc)₂ and 2 equiv. of AgTFA, when HFIP was employed as the solvent, which proved to be the optimal choice (entries 1–5).²¹ Control experiments confirmed the essential role of the palladium catalyst and silver additive (entries 6–7). Further optimization revealed that AgOAc, Ag₂O, K₂HPO₄, and Na₂CO₃ failed to show any beneficial effect (entries 8–11). Increasing the reaction temperature fell short in improving the performance (entries 12 and 13). The replacement of the amide group in substrate 1a with a carboxylic acid, aldehyde, ketone, or ester group failed to afford the desired arylation product (see the ESI^†). We were pleased to find that the use of 1.0 equiv. of trifluoroacetic acid (TFA) as an additive improved the yield to 71% (entry 14). To our delight, replacing the silver additive with Ag₂CO₃ resulted in the formation of B(3)–H mono-arylation product 4aa as the major product (entries 15–16).Optimization of reaction conditions^a

Access to P-stereogenic compounds via desymmetrizing enantioselective bromination

A novel and efficient desymmetrizing asymmetric ortho-selective mono-bromination of bisphenol phosphine oxides under chiral squaramide catalysis was reported. Using this asymmetric ortho-bromination strategy, a wide range of chiral bisphenol phosphine oxides and bisphenol phosphinates were obtained with good to excellent yields (up to 92%) and enantioselectivities (up to 98.5 : 1.5 e.r.). The reaction could be scaled up, and the synthetic utility of the desired P-stereogenic compounds was proved by transformations and application in an asymmetric reaction.

A highly efficient desymmetrizing asymmetric bromination of bisphenol phosphine oxides was developed, providing a wide range of chiral bisphenol phosphine oxides and bisphenol phosphinates with high yields and enantioselectivities.

P-Stereogenic compounds are a class of privileged structures, which have been widely present in natural products, drugs and biologically active molecules (Fig. 1a).^1–4 In addition, they are also important chiral materials for the development of chiral catalysts and ligands (Fig. 1b), because the chirality of the phosphorus atom is closer to the catalytic center which can cause remarkable stereo-induction.^5,6 Thus, the development of efficient methods for the synthesis of P-stereogenic compounds with novel structures and functional groups is very meaningful.^5a Conventional syntheses of P-stereogenic compounds mainly depended on the resolution of diastereomeric mixtures and chiral-auxiliary-based approaches, in which stoichiometric amounts of chiral reagents are usually needed.⁷ By comparison, asymmetric catalytic strategies, including asymmetric desymmetric reactions of dialkynyl, dialkenyl, diaryl and bisphenol phosphine oxides,^8–14 (dynamic) kinetic resolution of tertiary phosphine oxides,¹⁵ and asymmetric reactions of secondary phosphine oxides,¹⁶ can effectively solve the above-mentioned problems and have been considered as the most direct and efficient synthesis methods for constructing P-chiral phosphine oxides (Fig. 1c). Among them, organocatalytic asymmetric desymmetrization methods have been sporadic, in which the reaction sites were mainly limited to the hydroxyl group of bisphenol phosphine oxides that hindered their further transformation.^8–11 It is worth mentioning that asymmetric desymmetrization methods, especially organocatalytic desymmetrization reactions, due to their unique advantages of mild reaction conditions and wide substrate scope, have become an important strategy for asymmetric synthesis. Accordingly, the development of efficient organocatalytic desymmetrization strategy for the synthesis of important functionalized P-stereogenic compounds which contain multiple conversion groups is very meaningful and highly desirable.Open in a separate windowFig. 1(a) Examples of natural products containing P-stereogenic centers. (b) P-Stereogenic compound type ligand and catalyst. (c) Typical P-stereogenic compounds'' synthetic strategies.On the other hand, asymmetric bromination has been demonstrated to be one of the most attractive approaches for chiral compound syntheses.¹⁷ Since the pioneering work on peptide catalyzed asymmetric bromination for the construction of biaryl atropisomers,^18a the reports on constructing axially biaryl atropisomers,¹⁸ C–N axially chiral compounds,¹⁹ atropisomeric benzamides,²⁰ axially chiral isoquinoline N-oxides,²¹ and axially chiral N-aryl quinoids²² by electrophilic aromatic bromination have been well developed (Scheme 1a). In comparison, the desymmetrization of phenol through asymmetric bromination to construct central chirality remains a daunting task. Miller discovered a series of tailor made peptide catalyzed enantioselective desymmetrizations of diarylmethylamide through ortho-bromination (Scheme 1b).²³ Recently, Yeung realized amino-urea catalyzed desymmetrizing asymmetric ortho-selective mono-bromination of phenol derivatives to fix a new class of potent privileged bisphenol catalyst cores with excellent yields and enantioselectivities (Scheme 1b).²⁴ Despite this elegant work, there is no report on the synthesis of P-centered chiral compounds using the desymmetrizing asymmetric bromination strategy.Open in a separate windowScheme 1(a) Constructing axially chiral compounds by asymmetric bromination. (b) Known synthesis of central chiral compounds via asymmetric bromination. (c) This work: access to P-stereogenic compounds via desymmetrizing enantioselective bromination.Taking into account the above-mentioned consideration, we speculated that bisphenol phosphine oxides and bisphenol phosphinates are potential substrate candidates for desymmetrizing asymmetric bromination to construct P-stereogenic centers. The advantages of using bisphenol phosphine oxides and bisphenol phosphinates as substrates are shown in two aspects. First, the ortho-position of electron rich phenol is easy to take place electrophilic bromination reaction. Second, the corresponding bromination product structure contains abundant synthetic conversion groups, including bromine, hydroxyl group, alkoxy group and phosphoryl group. To achieve this goal, two challenges need to be overcome: (i) finding a suitable chiral catalyst for the desymmetrization process to induce enantiomeric control is troublesome, due to the remote distance between the prochiral phosphorus center and the enantiotopic site; (ii) selectively brominating one phenol to inhibit the formation of an achiral by-product is difficult. Herein, we report a chiral squaramide catalyzed asymmetric ortho-bromination strategy to construct a wide range of chiral bisphenol phosphine oxides and bisphenol phosphinates with good to excellent yields and enantioselectivities (Scheme 1c). It is worth mentioning that the obtained P-stereogenic compounds can be further transformed at multiple sites.Our initial investigation was carried out with bis(2-hydroxyphenyl)phosphine oxide 1a and N-bromosuccinimide (NBS) 2a as the model substrates, 10 mol% chiral amino-thiourea 4a as the catalyst, and toluene as the solvent, which were stirred at −78 °C for 12 h. As a result, the reaction gave the desired desymmetrization product 3a in 65% yield with 56 : 44 e.r. (Table 1, entry 1). Then, thiourea 4b was tested, in which a little better result was obtained (Table 1, entry 2). To our delight, using the chiral squaramides 4c–4f as the catalysts, the enantiomeric ratios of the desymmetrization products had been significantly improved (Table 1, entries 3–6). Especially, when chiral squaramide catalyst 4c was applied to this reaction, the enantiomeric ratio of 3a was increased to 95 : 5 (Table 1, entry 3). To further improve the yield and enantioselectivity, we next optimized the reaction conditions by varying reaction media and additives. As shown in Table 1, the reaction was affected by the solvent dramatically. Product 3a was obtained with low yield and enantioselectivity in DCM (Table 1, entry 7). Also, when Et₂O was used as the solvent, the yield and e.r. value of product 3a were all decreased (Table 1, entry 8). As a result, the initial used toluene was the optimal solvent. We also inspected the effect of different bromine sources, and found that the initially used NBS was the optimal one (Table 1, entries 3, 11 and 12). Fortunately, by adjusting the amount of bisphenol phosphine oxides to 1.5 equiv., the yield and the enantiomeric ratio of 3a were increased to 80% and 96.5 : 3.5, respectively (Table 1, entries 3, 13 and 14). Further increasing the amount of bisphenol phosphine oxides to 2.0 equiv. resulted in a reduced enantioselectivity (Table 1, entry 15).Optimization of the reaction conditions^a

Electrophilic fluoroalkylthiolation induced diastereoselective and stereospecific 1,2-metalate migration of alkenylboronate complexes

A transition metal free process for conjunctive functionalization of alkenylboron ate-complexes with electrophilic fluoroalkylthiolating reagents is described, affording β-trifluoroalkylthiolated and difluoroalkylthiolated boronic esters in good yield and excellent diastereoselectivity. The potential applicability of the method was demonstrated by the preparation of a difluoromethylthiolated mimic 12 of a potential drug molecule PF-4191834 for the treatment of asthma.

A transition metal free process for conjunctive functionalization of alkenylboron ate-complexes with electrophilic fluoroalkylthiolating reagents affords β-tri- and difluoroalkylthiolated boronic esters in good yield and diastereoselectivity.

An electrophile-induced 1,2-metalate migration of an alkenylboron “ate” complex and subsequent base-promoted β-elimination to form a functionalized cis-alkene, now the so-called Zweifel reaction, was first reported by Zweifel and co-workers in 1967 (Fig. 1A).^1–3 The reaction was proposed to proceed via an initial attack of the π electron of the alkene moiety to iodine to generate a zwitterionic iodonium ion, which then undergoes a stereospecific 1,2-metalate to afford a β-iodoboronic ester, followed by anti-elimination upon treatment with a base to afford a cis-olefin. Thus, if the iodine is replaced by an alternative electrophilic reagent and the use of a base is omitted, an interrupted-Zweifel reaction for the preparation of a stereospecific β-functionalized boronic ester could be realized. Toward this end, Aggarwal reported the first example of such a reaction by employing PhSeCl as the electrophilic reagent.⁴ It was proposed that PhSeCl first reacts with an alkenylboronate complex to form a zwitterionic seleniranium ion. Subsequent diastereospecific 1,2-metalate migration affords the stereospecific β-seleno-alkylboronate (Fig. 1B). Likewise, shortly after, Denmark and co-workers reported an analogous Lewis-base catalysed enantioselective and diastereoselective carbosulfenylation of an alkenylboronate complex using N-arylthiosaccharin as the electrophile (Fig. 1C).⁵Open in a separate windowFig. 1The interrupted Zweifel reaction.In light of these discoveries and our recent success in the development of a toolbox of electrophilic fluoroalkylthiolating reagents including three trifluoromethylthiolating reagents α-cumyltrifluoromethane sulfenate,⁶N-trifluoromethylthio-saccharin⁷ and N-trifluoromethylthiodibenzenesulfonimide,⁸ and two difluoromethylthiolating reagents N-difluoromethylthiophthalimide⁹ and S-(difluoromethyl)benzenesulfonothioate,¹⁰ we wondered whether these electrophilic fluoroalkylthiolating reagents could also trigger the proposed stereospecific 1,2-metalatation of the alkenylboronate complex to afford β-fluoroalkylthiolated borane derivatives (Fig. 1D). The trifluoromethylthio (–SCF₃) and the difluoromethylthio (–SCF₂H) groups have gained great attention recently, partially because of their high and tuneable lipophilicity¹¹ that might improve the drug candidate''s cell membrane permeability and consequently, its overall pharmacokinetics.¹² Thus, the development of new efficient reactions for the incorporation of the trifluoromethylthio¹³ or difluoromethylthio groups¹⁴ would be of vital importance in facilitating medicinal chemists'' endeavours in new drug discovery. Herein, we report that by employing electrophilic difluoromethylthiolating reagent PhSO₂SCF₂H 2a as the electrophile, the proposed difluoromethylthiolating induced stereospecific 1,2-metalate migration of alkenyl boronate complexes occurred smoothly to afford β-difluoromethylthiolated boronic esters in good yields and excellent diastereoselectivity. Likewise, when electrophilic trifluoromethylthiolating reagent N-trifluoromethylthiosaccharin 7 was used, an analogous reaction for the diastereoselective formation of β-trifluoromethylthiolated boronic esters was successfully achieved.We began our study by examining the reaction of the electrophilic difluoromethylthiolating reagent 2a with the alkenylboronate complex which was generated in situ by mixing 1a and PhLi in diethyl ether. It was found that the reaction in CH₃CN occurred in full conversion after 12 hours at room temperature, affording the corresponding product 3a in 53% yield (Table 1, entry 1). When the amount of PhLi was increased to 1.3 equivalents, the yield was increased to 76%, while the yield decreased to 66% when 2.0 equivalents of PhLi were used, likely due to the decomposition of the product under strong basic conditions (Table 1, entries 1–5). We then further investigated the effect of the reaction temperature and the solvent. It was found that the temperature did not affect the reaction significantly since the yields of the desired products were decreased slightly to 72% and 70%, respectively, when the reactions were conducted at 0 °C or −15 °C (Table 1, entries 6 and 7). Likewise, the reaction was not sensitive to the polarity of the solvent since reactions conducted in less polar solvents such as THF or CH₂Cl₂ or nonpolar solvents like toluene occurred in slightly lower 60–73% yields (Table 1, entries 9–11). We also found that reaction using N-difluoromethylthiophthalimide as the electrophilic difluoromethylthiolating reagent gave the same product in a slightly lower yield (Table 1, entry 8).Optimization of conditions for the reaction of the alkenyl boronate complex with PhSO₂SCF₂H^a

Formal [4 + 4]-, [4 + 3]-, and [4 + 2]-cycloaddition reactions of donor–acceptor cyclobutenes,cyclopropenes and siloxyalkynes induced by Brønsted acid catalysis

Brønsted acid catalyzed formal [4 + 4]-, [4 + 3]-, and [4 + 2]-cycloadditions of donor–acceptor cyclobutenes, cyclopropenes, and siloxyalkynes with benzopyrylium ions are reported. [4 + 2]-cyclization/deMayo-type ring-extension cascade processes produce highly functionalized benzocyclooctatrienes, benzocycloheptatrienes, and 2-naphthols in good to excellent yields and selectivities. Moreover, the optical purity of reactant donor–acceptor cyclobutenes is fully retained during the cascade. The 1,3-dicarbonyl product framework of the reaction products provides opportunities for salen-type ligand syntheses and the construction of fused pyrazoles and isoxazoles that reveal a novel rotamer-diastereoisomerism.

Brønsted acid catalysis realizes formal [4 + 4]-, [4 + 3]-, and [4 + 2]-cycloadditions of donor–acceptor cyclobutenes, cyclopropanes, and siloxyalkynes with benzopyrylium ions.

Medium-sized rings are the core skeletons of many natural products and bioactive molecules,¹ and a growing number of strategies have been developed for their synthesis.² Because of their enthalpic and entropic advantages, ring expansion is a highly efficient methodology for these constructions.^3–6 For example, Sun and co-workers have developed acid promoted ring extensions of oxetenium and azetidinium species formed from siloxyalkynes with cyclic acetals and hemiaminals (Scheme 1a).⁴ Takasu and co-workers have reported an elegant ring expansion with a palladium(ii) catalyzed 4π-electrocyclic ring-opening/Heck arylation cascade with fused cyclobutenes (Scheme 1b).⁵ Each transformation is initiated by the formation of fused bicyclic units followed by ring expansion or rearrangement to give medium-sized rings.Open in a separate windowScheme 1Cycloaddition/ring expansion background and this work.Strategies for the formation of fused bicyclic compounds rely on cycloaddition of dienes or dipoles with unsaturated cyclic compounds⁷ and, if the reactant cyclic compound is strained and chiral, the resulting bicyclic compound is activated toward ring opening that results in retention of chirality. We have recently reported access to donor–acceptor cycloalkenes by [3 + n] cycloaddition that have the prerequisites of unsaturated cyclic compounds suitable for cycloaddition.⁸ Donor–acceptor (D–A) cyclopropenes⁹ and cyclobutenes¹⁰ have sufficient strain in the resulting bicyclic compounds to undergo ring opening. We envision that the selection of a diene or dipolar reactant and suitable reaction conditions could realize cycloaddition and subsequent ring expansion. Benzopyrylium species,^11,12 which are generated by metal or acid catalysis, have attracted our attention. We anticipated that their high reactivity would overcome the conventional unfavorable kinetic and/or thermodynamic factors that typically impede medium-sized ring formation. From a mechanistic perspective, benzopyrylium species are often formed by transition metal catalyzed reactions with 2-alkynylbenzaldehydes.¹¹ Recently, the reaction between 1H-isochromene acetal and Brønsted acid catalyst forms the 2-benzopyrylium salts that could react with functional alkenes to give same cycloaddition products.¹² Consequently, we believed that the [4 + 2]-cyclization between benzopyrylium species and donor–acceptor cyclobutenes, cyclopropenes, or siloxyalkynes would give bridged oxetenium intermediates, which contain high strain energy that should provide the driving force for ring expansion. The “push and pull” electronic effect of donor–acceptor functional groups facilitates deMayo-type ring-opening of the cyclobutane or cyclopropane skeletons (Scheme 1c).¹³Here we report bis(trifluoromethanesulfonyl)imide (HNTf₂) catalyzed formal [4 + 4]-, [4 + 3]- and [4 + 2]-cycloaddition reactions of D–A cyclobutenes, cyclopropenes, and siloxyalkynes with benzopyrylium salts. Polysubstituted benzo-cyclooctatrienes, benzocycloheptatrienes and 2-naphthols, are produced in good to excellent yields and selectivities. Complete retention of configuration occurs using chiral cyclobutenes, and opportunities for further functionalization are built into these constructions.Initially, we conducted transition metal catalyzed reactions with 2-alkynylbenzaldehyde intending to produce the corresponding benzopyrylium ion and explore the possibility of cycloaddition/ring opening with donor–acceptor cyclobutene 2a. Use of Ph₃PAuCl/AgSbF₆, Pd(OAc)₂ and Cu(OTf)₂, which were efficient catalysts in previous transformations,¹¹ gave only a trace amount of cycloaddition product (Fig. 1). Spectral analysis showed that mostly starting material remained (Fig. 1-i and ii). Increasing the reaction temperature led only to decomposition of 2-alkynylbenzaldehyde (Fig. 1-iv) or donor–acceptor cyclobutene 2a (Fig. 1-iv).Open in a separate windowFig. 1Reaction of 2-alkynylbenzaldehyde with donor–acceptor cyclobutene 2a.From these disappointments we turned our attention to 1H-isochromene acetal 1a as the benzopyrylium ion precursor. Various Lewis acid catalysts were employed with limited success, but we were pleased to observe the formation of the desired formal [4 + 4]-cycloaddition benzocyclooctatriene product 3aa, albeit in low yields (Table 1, entries 1–6). Selection of the Brønsted super acid HNTf₂ (ref. 14) proved to be the most promising, producing 3aa in 40% yield (Table 1, entry 7). Increasing the amount of D–A cyclobutene 2a by 30% gave a much higher yield of 3aa (Table 1, entry 8 vs. 7). Optimization of the stoichiometric reaction between 1a and 2a by increasing the reaction temperature from rt to 35 °C led to the formation of the desired product in 76% isolated yield (Table 1, entry 9 vs. 8). However, a further increase in the reaction temperature (Table 1, entry 10) or reducing the catalyst loading to 5 mol% did not improve the yield of 3aa (Table 1, entry 11).Optimization of reaction conditions^a

An unusual formal migrative cycloaddition of aurone-derived azadienes: synthesis of benzofuran-fused nitrogen heterocycles

Aurone-derived azadienes are well-known four-atom synthons for direct [4 + n] cycloadditions owing to their s-cis conformation as well as the thermodynamically favored aromatization nature of these processes. However, distinct from this common reactivity, herein we report an unusual formal migrative annulation with siloxy alkynes initiated by [2 + 2] cycloaddition. Unexpectedly, this process generates benzofuran-fused nitrogen heterocyclic products with formal substituent migration. This observation is rationalized by less common [2 + 2] cycloaddition followed by 4π and 6π electrocyclic events. DFT calculations provided support to the proposed mechanism.

A HNTf₂-catalyzed formal migrative cycloaddition of aurone-derived azadienes with siloxy alkynes has been developed to provide access to benzofuran-fused dihydropyridines.

Benzofuran is an important scaffold in biologically important natural molecules and therapeutic agents.¹ Among them, benzofuran-fused nitrogen heterocycles are particularly noteworthy owing to their broad spectrum of bioactivities for the treatment of various diseases (Fig. 1).² Consequently, the development of efficient methods for their assembly has been a topic receiving enthusiastic attention from synthetic chemists.³ Notably, aurone-derived azadienes (e.g., 1) have been extensively employed as precursors toward these skeletons owing to their easy availability and versatile reactivity (Scheme 1a).³ The polarized conjugation system, combined with the preexisting s-cis conformation, has enabled them to serve as ideal annulation partners for the synthesis of nitrogen heterocycles of variable ring sizes. Moreover, the aromatization nature of these processes by forming a benzofuran ring provides additional driving force for them to behave as a perfect four-atom synthon for [4 + n] cycloaddition.³ In contrast, the use of such species as a two-atom partner for [2 + n] cycloaddition has been less developed.^3c,k,4 Herein, we report a new migrative annulation leading to benzofuran-fused dihydropyridines of unexpected topology (Scheme 1b, with formal R² migration), which is initiated by the less common [2 + 2] cycloaddition.Open in a separate windowFig. 1Benzofuran-fused N-heterocyclic natural and bioactive molecules.Open in a separate windowScheme 1Synthesis of benzofuran-fused nitrogen heterocycles.Siloxy alkynes are another important family of building blocks in organic synthesis.^5–8 The presence of a highly polarized C–C triple bond enables such molecules to serve as versatile two-carbon cycloaddition partners in various annulation reactions.^5–7 In the above context and in continuation of our interest in the study of such electron-rich alkynes,⁷ we envisioned that the reaction between aurone-derived azadienes 1 and siloxy alkynes 2 should lead to facile electron-inversed [4 + 2] cycloaddition to form benzofuran-fused dihydropyridine products (Scheme 1b). Interestingly, the expected product 3′ from direct [4 + 2] cycloaddition was not observed. Instead, a dihydropyridine product 3 with formal R² migration was observed. Careful analysis of the mechanism suggested that a [2 + 2] cycloaddition followed by 4π and 6π electrocyclic steps might be responsible for this unexpected product topology (vide infra).We began our investigation with the model substrates 1a and 2a, which were easily prepared in one step from aurone and 1-hexyne, respectively.⁸ Various Lewis acids were initially examined as potential catalysts for this cycloaddition (Table 1). Unfortunately, common Lewis acids (e.g., TiCl₄, BF₃·OEt₂, Sc(OTf)₃, In(OTf)₃, and AgOTf) were all ineffective (entries 1–5). Substrate decomposition into an unidentifiable mixture was typically observed. However, further screening indicated that AgNTf₂ served as an effective catalyst, leading to benzofuran-fused dihydropyridine 3a in 44% yield (entry 6). Careful analysis by X-ray crystallography confirmed that it was not formed by simple [4 + 2] cycloaddition, as the positions of the phenyl and the siloxy groups were switched (vs. the expected topology). The distinct catalytic performance of AgNTf₂ (vs. AgOTf) suggested that the triflimide counter anion Tf₂N⁻ might be important. However, further screening of various metal triflimide salts did not improve the reaction efficiency (entry 7). Instead, we were delighted to find that the corresponding Brønsted acid HNTf₂ served as a better catalyst (57% yield, entry 8). However, triflic acid (TfOH) led to no desired product in spite of complete conversion (entry 9). After considerable efforts in the optimization of other reaction parameters, an improved yield of 75% was obtained with 2.5 mol% of HNTf₂ and 2.5 equivalents of 2a at 60 °C (entry 10). Solvent screening indicated that the reaction proceeded faster in DCE with comparable yield (entry 11). However, other solvents were all inferior (entries 12–15). Finally, with a reversed order of addition of the two reactants, the yield was slightly improved (entry 16). We believe that this might be related to the relative decomposition rates of the substrates.Reaction conditions^a

Catalytic asymmetric hydrogenation of (Z)-α-dehydroamido boronate esters: direct route to alkyl-substituted α-amidoboronic esters

The direct catalytic asymmetric hydrogenation of (Z)-α-dehydroamino boronate esters was realized. Using this approach, a class of therapeutically relevant alkyl-substituted α-amidoboronic esters was easily synthesized in high yields with generally excellent enantioselectivities (up to 99% yield and 99% ee). The utility of the products has been demonstrated by transformation to their corresponding boronic acid derivatives by a Pd-catalyzed borylation reaction and an efficient synthesis of a potential intermediate of bortezomib. The clean, atom-economic and environment friendly nature of this catalytic asymmetric hydrogenation process would make this approach a new alternative for the production of alkyl-substituted α-amidoboronic esters of great potential in the area of organic synthesis and medicinal chemistry.

The direct catalytic asymmetric hydrogenation of (Z)-α-dehydroamino boronate esters was realized.

Since FDA approval of bortezomib¹ for the treatment of multiple myeloma, chiral α-aminoboronic acids have been recognized as key pharmacophores for the design of proteasome inhibitors.² The incorporation of chiral α-aminoboronic acid motifs at the C-terminal position of a peptide³ to develop potential clinical drug candidates has drawn increasing interest⁴ (Fig. 1). Meanwhile, chiral α-amidoboronic acids and their derivatives are useful synthetic building blocks for the stereospecific construction of chiral amine compounds.⁵ The biological and synthetic value of α-amidoboronates has led to considerable efforts for the development of efficient synthetic methods. However, up to now, limited transition-metal-catalyzed asymmetric approaches have been reported. The widely used strategies to synthesize these compounds are stepwise Matteson homologation/N-nucleophilic replacement,⁶ borylation of imines,⁷ and alkene functionalization.⁸ Recently, two other elegant approaches, Ni-catalyzed decarboxylative borylation of α-amino acid derivatives⁹ and enantiospecific borylation of lithiated α-N-Boc species,¹⁰ were reported by the Baran and Negishi groups, respectively. To the best of our knowledge, the majority of the methods relied on either stoichiometric amounts of chiral auxiliaries^6,7a,b or substrate-control strategies⁹ and most of these methods enable the construction of aryl-substituted α-aminoboronates. Enantioselective methods to access unfunctionalized alkyl-substituted α-aminoboronic esters are still rarely developed and so far only two examples have been realized by the Miura^8a and Scheidt^7f groups, respectively. Considering that most therapeutically relevant α-amidoboronic acid fragments contain an alkyl subunit and the fact that the options for the synthesis of alkyl-substituted α-amidoboronic esters in an enantioselective manner are still rare, the development of other distinct approaches would be highly desirable. Herein, we report a new alternative to access these compounds by catalytic asymmetric hydrogenation of (Z)-α-dehydroamidoboronate esters. With this approach, the desired chiral alkyl-substituted α-amidoboronic esters could be obtained in high yields and generally excellent enantioselectivities (up to 99% yield and 99% ee) with simple purification.Open in a separate windowFig. 1Selected inhibitors containing chiral alkyl-substituted α-amidoboronic acids.Catalytic asymmetric hydrogenation of olefins is an atom-economic, environmentally friendly and clean process for the synthesis of valuable pharmaceuticals, agricultural compounds and feedstock chemicals.¹¹ Recently, hydrogenation of vinylboronic compounds has emerged for the preparation of chiral boronic compounds in a regiodefined manner.^12,13 However, surprisingly α-dehydroamido boronate esters and their derivatives, as elegant precursors to access alkyl-substituted α-amidoboronic compounds, have never been used as substrates in asymmetric hydrogenation and remain a challenging project. To our knowledge, only one efficient hydrogenation approach to (1-halo-1-alkenyl) boronic esters was reported for indirect synthesis of alkyl-substituted α-aminoboronic esters but it was accompanied by inevitable de-halogenated by-products¹⁴ (Scheme 1). Given the catalytic efficiency and atom economy of the hydrogenation method, the development of a new direct hydrogenation approach to construct these important chiral alkyl-substituted α-amidoboronic esters would be very appealing.Open in a separate windowScheme 1Approaches towards the synthesis of chiral alkyl-substituted α-aminoboronic esters.The inspiration for our approach to the hydrogenation of α-dehydroamido boronates came from the molecular structures of relevant biologically active inhibitors containing alkyl-substituted α-amidoboronic acid fragments. Due to the limited stability of free α-aminoboronic acids, an electron-withdrawing carboxylic N-substituent is often required.¹⁵ Thus, we envisaged that N-carboxyl protected α-dehydroamido boronate esters could serve as a potential precursor for the synthesis of alkyl-substituted α-amidoboronates through Rh-catalyzed asymmetric hydrogenation of the C C bond¹⁶ (Fig. 1), a strategically distinct approach to the construction of unfunctionalized alkyl-substituted α-amidoboronic esters. However, challenges still remain, including: (1) how to synthesize α-dehydroamido boronates; (2) the facile transmetalation process of the starting materials leading to deboronated by-products in the hydrogenation process;¹⁷ (3) the unknown stability of α-amidoboronic compounds in the presence of a transition-metal catalyst and hydrogen molecules. As part of our continuous efforts to develop efficient hydrogenation approaches to construct valuable motifs,¹⁸ here we present the results of the investigation to address the aforementioned challenges.The desired aryl-substituted (Z)-α-dehydroamido boronates could be obtained by Cu-catalyzed regioselective hydroborylation of ynamide according to a previous report.¹⁹ However, different α/β-regioselectivity was observed for the preparation of alkyl-substituted (Z)-α-dehydroamido boronate esters and a new synthetic route was developed (Scheme 2, see the ESI^† for details). Of note, (Z)-α-dehydroamido boronate esters should be purified with deactivated silica gel,^7c or else protodeborylation would occur readily with flash chromatography.Open in a separate windowScheme 2Synthetic route to (Z)-α-dehydroamino boronates.In order to check the feasibility of our hypothesis, three substrates were prepared with Rh(NBD)₂BF₄ and examined and our group prepared (Rc,Sp)-DuanPhos under 50 atm hydrogen pressure (Table 1). Gratifyingly, substrate 1b reacted smoothly to provide the desired product 2b in high yield and enantioselectivity (>99% conv., 98% ee, entry 2) whilst the reaction with substrate 1a yielded a mixture of deborylation products and 1c did not work at all (entries 1 and 3). Of note, we did not observe deborylation products with 1b under the current reaction conditions and we did not select (Z)-α-dehydroamido boronic acid 1a as the model substrate because of its poor solubility in most solvents. Then, a variety of chiral diphosphine ligands were investigated along with Rh(NBD)₂BF₄ and the results are shown in Table 1. In most cases, the reaction proceeded smoothly to furnish the desired products and the best results were obtained when (Rc,Sp)-DuanPhos was used as the ligand (entries 2 and 4–12). Poor results were obtained with axially bidentate phosphine ligands (entries 5, 6 and 9). (R,R)-QuinoxP* and (R,R)-Ph-BPE also gave good conversion with a slightly decreased ee whilst (R,R)-ⁱPr-DuPhos exhibited poor results (entries 4, 7 and 10). Subsequent solvent screening revealed that the desired products could be obtained in most of the solvents and 1,2-DCE was the best solvent. (Entry 13, see the ESI^†).Condition optimization for catalytic asymmetric hydrogenation of 1^a

3-Aminooxetanes: versatile 1,3-amphoteric molecules for intermolecular annulation reactions

Despite the versatility of amphoteric molecules, stable and easily accessible ones are still limitedly known. As a result, the discovery of new amphoteric reactivity remains highly desirable. Herein we introduce 3-aminooxetanes as a new family of stable and readily available 1,3-amphoteric molecules and systematically demonstrated their amphoteric reactivity toward polarized π-systems in a diverse range of intermolecular [3 + 2] annulations. These reactions not only enrich the reactivity of oxetanes, but also provide convergent access to valuable heterocycles.

Despite the versatility of amphoteric molecules, stable and easily accessible ones are still limitedly known.

Amphoteric molecules, which bear both nucleophilic and electrophilic sites with orthogonal reactivity, represent an attractive platform for the development of chemoselective transformations.¹ For example, isocyanides are well-established 1,1-amphoteric molecules, with the terminal carbon being both nucleophilic and electrophilic, and this feature has enabled their exceptional reactivity in numerous multi-component reactions.² In the past few decades, substantial effort has been devoted to the search for new amphoteric molecules.^1–5 Among them, 1,3-amphoteric molecules proved to be versatile. The Yudin and Beauchemin laboratories have independently developed two types of such molecules, α-aziridine aldehydes and amino isocyanates, respectively.^4,5 With an electrophilic carbon and a nucleophilic nitrogen in relative 1,3-positions, these molecules are particularly useful for the chemoselective synthesis of heterocycles with high bond-forming efficiency without protective groups (Fig. 1). However, such elegant amphoteric systems still remain scarce. Therefore, the development of new stable amphoteric molecules with easy access remains highly desirable.Open in a separate windowFig. 1Representative [1,3]-amphoteric molecules versus 3-aminooxetanes.In this context, herein we introduce 3-aminooxetanes as a new type of 1,3-amphoteric molecules and systematically demonstrate their reactivity in a range of [3 + 2] annulations, providing rapid access to diverse heterocycles. Notably, 3-aminooxetanes are bench-stable and either commercially available or easily accessible. However, their amphoteric reactivity has not been appreciated previously.Oxetane is a useful functional group in both drug discovery and organic synthesis.^6–9 Owing to the ring strain, it is prone to nucleophilic ring-opening, in which it serves as an electrophile (Scheme 1A).^6–8 We envisioned that, if a nucleophilic group is installed in the 3-position (e.g., amino group), such molecules should exhibit 1,3-amphoteric reactivity due to the presence of both nucleophilic and electrophilic sites (Scheme 1B). Importantly, the 1,3-relative position is crucial for inhibiting self-destructive intra- or intermolecular ring-opening (i.e. the 3-nucleophilic site attack on oxetane itself) due to high barriers. Thus, such orthogonality is beneficial to their stability. In contrast, the nucleophilic site is expected to react with an external polarized π bond (e.g., X = Y, Scheme 1B), which enables a better-positioned nucleophile (Y) to attack the oxetane and cyclize. Thus, a formal [3 + 2] annulation should be expected. Unlike the well-known S_N2 reactivity of oxetanes with simple bond formation, this amphoteric reactivity would greatly enrich the chemistry of oxetanes with multiple bond formations and provide expedient access to various heterocycles. In contrast to the conventional approaches that require presynthesis of advanced intermediates (e.g., intramolecular ring-opening),⁸ the exploitation of such amphoteric reactivity in an intermolecular convergent manner from simple substrates would be more practically useful. Moreover, more activation modes could be envisioned in addition to oxetane activation. In 2015, Kleij and coworkers reported an example of cyclization between 3-aminooxetane and CO₂ in 55% yield, which provided a pioneering precedent.¹⁰ However, a systematic study to fully reveal such amphoteric reactivity in a broad context remains unknown in the literature.Open in a separate windowScheme 1Typical oxetane reactivity and the new amphoteric reactivity.To test our hypothesis, we began with the commercially available 3-aminooxetanes 1a and 1b as the model substrates. Phenyl thioisocyanate 2a and CS₂ were initially employed as reaction partners, as they both have a polarized C S bond as well as a relatively strong sulfur nucleophilic motif. Moreover, the resulting desired products, iminothiazolidines and mercaptothiazolidines, are both heterocycles with important biological applications (Fig. 2).¹¹ To our delight, simple mixing these two types of reactants in DCM resulted in spontaneous reactions at room temperature without any catalyst. The corresponding [3 + 2] annulation products iminothiazolidine 3a and mercaptothiazolidine 4a were both formed with excellent efficiency (Scheme 2). It is worth mentioning that catalyst-free ring-opening of an oxetane ring is rarely known, particularly for intermolecular reactions.^6–9 In this case, the high efficiency is likely attributed to the suitable choice and perfect position of the in situ generated sulfur nucleophile.Open in a separate windowFig. 2Selected bioactive molecules containing iminothiazolidine and mercaptothiazolidine motifs.Open in a separate windowScheme 2Initial results between 3-aminooxetanes and thiocarbonyl compounds.The catalyst-free annulation protocol is general with respect to various 3-aminooxetanes and isothiocyanates. A range of iminothiazolidines and mercaptothiazolidines were synthesized with high efficiency under mild conditions (Scheme 3). Many of them were obtained in quantitative yield. Quaternary carbon centers could also be generated from 3-substituted 3-aminooxetanes (e.g., 3j). The structure of product 3b was unambiguously confirmed by X-ray crystallography.Open in a separate windowScheme 3Formal [3 + 2] annulation with isothiocyanates and CS₂. Reaction conditions: 1 (0.3–0.4 mmol), 2 (1.1 equiv.) or CS₂ (1.5 equiv.), DCM (2 mL), RT, 3 h for 3 and 36 h for 4. Yields are for the isolated products.With the initial success of thiocarbonyl partners, we next turned our attention to isocyanates, in which the carbonyl group serves as the [3 + 2] annulation motif. Compared with sulfur as the nucleophilic site in the above cases, the oxygen atom is less nucleophilic. As expected, initial tests of the reactivity by mixing 1b and 5a resulted in no desired annulation product 6a in the absence of a catalyst (Table 1, entry 1). Next, Brønsted acids, including TsOH and the super acid HNTf₂, were examined as catalysts, but with no success (entries 2 and 3). We then resorted to various Lewis acids, particularly those oxophilic ones, in hope of activating the oxetane unit. Unfortunately, many of them still remained ineffective (e.g., ZnCl₂, AuCl, and FeCl₃). However, to our delight, further screening of stronger Lewis acids helped identify Sc(OTf)₃, Zn(OTf)₂, and In(OTf)₃ to be effective at room temperature, leading to the desired iminooxazolidine product 6a in good yield (entries 7–9). Its structure was confirmed by X-ray crystallography. Nevertheless, aiming to search for a cheaper catalyst, we continued to optimize this reaction at a higher temperature using previous ineffective catalysts. Indeed, FeCl₃ was found to be effective at 80 °C (61% yield, entry 10), while Brønsted acid TsOH remained ineffective at this temperature (entry 11). Notably, decreasing the loading of FeCl₃ to 1 mol% led to a higher yield (89% yield, entry 12). However, further decreasing to 0.5 mol% resulted in slightly diminished efficiency (entry 13).Reaction conditions for annulation with isocyanates^a

Polycyclic heteroaromatics via hydrazine-catalyzed ring-closing carbonyl–olefin metathesis

The use of hydrazine-catalyzed ring-closing carbonyl–olefin metathesis (RCCOM) to synthesize polycyclic heteroaromatic (PHA) compounds is described. In particular, substrates bearing Lewis basic functionalities such as pyridine rings and amines, which strongly inhibit acid catalyzed RCCOM reactions, are shown to be compatible with this reaction. Using 5 mol% catalyst loadings, a variety of PHA structures can be synthesized from biaryl alkenyl aldehydes, which themselves are readily prepared by cross-coupling.

Hydrazine catalysis enables the ring-closing carbonyl–olefin metathesis (RCCOM) to form polycyclic heteroaromatics, especially those with basic functionality.

Polycyclic heteroaromatic (PHA) structures comprise the core framework of many valuable compounds with a diverse range of applications (Fig. 1A).¹ For example, polycyclic azines (e.g. quinolines) are embedded in many alkaloid natural products, including diplamine² and eupolauramine³ to name just a few. These types of structures are also of interest for their biological activity, such as with the inhibitor of the Src-SH3 protein–protein interaction shown in Fig. 1A.⁴ Many nitrogenous PHAs are also useful as ligands for transition metal catalysis, as exemplified by the widely used ligand 1,10-phenanthroline.⁵ Meanwhile, chalcogenoarenes⁶ such as dinaphthofuran⁷ and benzodithiophene⁸ have attracted high interest for both their medicinal properties⁹ and especially for their potential use as organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), and organic field-effect transistors (OFETs).¹⁰ These and numerous other examples have inspired the development of a wide variety of strategies to construct PHAs.^1,11–14 Although these approaches are as varied as the structures they target, the wide range of molecular configurations within PHA chemical space and the challenges inherent in exerting control over heteroatom position and global structure make novel syntheses of these structures a topic of continuing interest.Open in a separate windowFig. 1(A) Examples of PHAs. (B) RCCOM strategy for PHA synthesis. (C) Lewis base inhibition for Lewis acid vs. hydrazine catalyzed RCCOM. (D) Hydrazine-catalyzed RCCOM for PHA synthesis.One potentially advantageous strategy for PHA synthesis is the use of ring-closing carbonyl–olefin metathesis¹⁵ (RCCOM) to forge one of the PHA rings, starting from a suitably disposed alkenyl aldehyde precursor 2 that can be easily assembled by cross-coupling (Fig. 1B). In related work, the application of RCCOM to form polycyclic aromatic hydrocarbons (PAHs) was reported by Schindler in 2017.¹⁶ In this case, 5 mol% FeCl₃ catalyzed the metathesis of substrates to form phenanthrenes and related compounds in high yields at room temperature. This method was highly attractive for its efficiency, its use of an earth-abundant metal catalyst, and the production of benign acetone as the only by-product. Nevertheless, one obvious drawback to the use of Lewis acid activation is that the presence of any functionality that is significantly more Lewis basic than the carbonyl group can be expected to strongly inhibit these reactions (Fig. 1C). Such a limitation thus renders this method incompatible with a wide swath of complex molecules, especially PHAs comprised of azine rings. This logic argues for a mechanistically orthogonal RCCOM approach that allows for the synthesis of PHA products with a broader range of ring systems and functional groups.We have developed an alternative approach to catalytic carbonyl–olefin metathesis that makes use of the condensation of 1,2-dialkylhydrazines 5 with aldehydes to form hydrazonium ions 6 as the key catalyst–substrate association step.^17–19 This interaction has a much broader chemoorthogonality profile than Lewis acid–base interactions and should thus be much less prone to substrate inhibition than acid-catalyzed approaches. In this Communication, we demonstrate that hydrazine-catalyzed RCCOM enables the rapid assembly of PHAs bearing basic functionality (Fig. 1D).For our optimization studies, we chose biaryl pyridine aldehyde 7 as the substrate (20 salt 11 was also productive (entry 2), albeit somewhat less so. Notably, iron(iii) chloride generated no conversion at either ambient or elevated temperatures (entries 3 and 4). Trifluoroacetic acid (TFA) was similarly ineffective (entry 5). Meanwhile, a screen of various solvents revealed that, while the transformation could occur in a range of media (entries 6–9), THF was optimal. Finally, by raising the temperature to 90 °C (entry 10) or 100 °C (entry 11), up to 96% NMR yield (85% isolated yield) of adduct 8 could be obtained in the same time period.Optimization studies^a

Correction: Expanding medicinal chemistry into 3D space: metallofragments as 3D scaffolds for fragment-based drug discovery

Correction for ‘Expanding medicinal chemistry into 3D space: metallofragments as 3D scaffolds for fragment-based drug discovery’ by Christine N. Morrison et al., Chem. Sci., 2020, 11, 1216–1225, https://doi.org/10.1039/C9SC05586J.

The authors regret that in the original article, inhibitory values reported for some metallofragments were incorrect. Unfortunately, DMSO stock solutions of reportedly active ferrocene-based metallofragments were found to decompose in the presence of light, which resulted in inaccurate inhibition values. The authors maintain that the core conclusions of the paper are accurate and the utility of three-dimensional metal complexes for fragment-based drug discovery has merit.In the original article, ‘class A’ metallofragments are comprised of ferrocene derivatives (Fig. 1). Some of these ferrocene fragments (specifically those containing carbonyl groups) are reported as broadly inhibiting several protein targets. It was noted in our original report that the ferrocene scaffold was likely promiscuous due to its lipophilicity and potential redox activity, but that it might still serve as a useful metallofragment for fragment-based drug discovery (FBDD) campaigns. However, re-evaluation of these compounds against the influenza endonuclease (PA_N) failed to reproduce our original inhibition results for the class A metallofragments using freshly prepared stocks, indicating a problem with the materials used in the original study.Open in a separate windowFig. 1Chemical structures of class A metallofragments.Several compounds from class A were originally reported as having near complete (100%) inhibition against PA_N endonuclease at an inhibitor concentration of 200 μM (​and2).2). However, when re-evaluated under identical conditions, using freshly prepared DMSO stock solutions, inhibition was only observed with one fragment of this class (A22, Fig. 1), with the previously reported highly active fragments (A4, A7–A21, CompoundA1A2A3A4A5A7A8A9A10A11Reported12 ± 6<1<145 ± 148 ± 7103 ± 5103 ± 453 ± 546 ± 790 ± 5Corrected3 ± 10n.d.18 ± 36 ± 321 ± 59 ± 310 ± 54 ± 216 ± 410 ± 7Open in a separate window^an.d. = not determined.

Reductive radical-initiated 1,2-C migration assisted by an azidyl group

We report here a novel reductive radical-polar crossover reaction that is a reductive radical-initiated 1,2-C migration of 2-azido allyl alcohols enabled by an azidyl group. The reaction tolerates diverse migrating groups, such as alkyl, alkenyl, and aryl groups, allowing access to n+1 ring expansion of small to large rings. The possibility of directly using propargyl alcohols in one-pot is also described. Mechanistic studies indicated that an azidyl group is a good leaving group and provides a driving force for the 1,2-C migration.

We report here a novel reductive radical-polar crossover reaction that is a reductive radical-initiated 1,2-C migration of 2-azido allyl alcohols enabled by an azidyl group.

Since the groups of Ryu and Sonoda described the reductive radical-polar crossover (RRPCO) concept in the 1990s,¹ it has attracted considerable attention in modern organic synthesis.² By using this concept, a variety of complex molecules could be assembled in a fast step-economic fashion which is not possible using either radical or polar chemistry alone. However, only two RRPCO reaction modes are known to date: nucleophilic addition and nucleophilic substitution (Fig. 1A). The first RRPCO reaction is the nucleophilic addition of organometallic species, which is generated in situ from the reduction of a strong reducing metal with a carbon-centered radical intermediate and cations (E⁺ = H⁺, I⁺, Br⁺, path 1).³ However, the necessity for a large amount of harmful and strong reducing metals has greatly limited the scope and functional group tolerance of the reaction. Recently, photoredox catalysis has not only successfully overcome the shortcomings of using toxic strong reducing metals in the RRPCO reaction,⁴ but also enabled the development of several new RRPCO reaction types, including the nucleophilic addition with carbonyl compounds or carbon dioxide (path 2),⁵ the cyclization of alkyl halides/tosylates (path 3),⁶ and β-fluorine elimination (path 4).⁷ Although the RRPCO reaction has been greatly advanced by photoredox catalysis, it is still in its infancy, and the development of a novel RRPCO reaction is of great importance.Open in a separate windowFig. 1(A) Reductive radical-polar crossover reactions; (B) this work: reductive radical-initiated 1,2-C migration assisted by an azidyl group.Herein, we wish to report a new type of reductive radical-polar crossover cascade reaction that is the reductive radical-initiated 1,2-C migration under metal-free conditions (Fig. 1B). The development of this approach is not only to further expand the application of the RRPCO reaction, but also to solve the problems associated with the oxidative radical-initiated 1,2-C migration, such as the necessity for an oxidant and/or transition metal for the oxidative termination of the radicals, and also required sufficient ring strain to avoid the generation of epoxy byproducts.⁸ To realize this reaction, a driving force is needed to drive the 1,2-C migration after reductive termination, to avoid the otherwise inevitable protonation of the generated anion.⁹ Inspired by the leaving group-induced semipinacol rearrangement,¹⁰ we envisaged that 2-azidoallyl alcohols¹¹ might be the ideal substrates for the reductive radical-initiated 1,2-C migration because these compounds contain both an allylic alcohol motif, which is vital for the radical-initiated 1,2-C migration, and an azidyl group, a good leaving group,¹² which may facilitate the 1,2-C migration after the reductive termination of the radicals.With the optimal conditions established (ESI, Table S1^†), we then explored the scope of this radical-initiated 1,2-migration. As shown in Table 1, a series of naphthenic allylic alcohols could undergo n+1 ring expansion with minimal impact on the product yield (Table 1, 3aa–aq). Notably, only the alkyl groups were migrated when using benzonaphthenic allylic alcohols in the reaction. These results might be attributed to the aryl group possessing greater steric resistance. The structure of 3an was further verified by single-crystal diffraction. Interestingly, the vinyl azide derived from a pharmaceutical ethisterone was also a viable substrate, affording the migration product 3aq in 57% yield, which highlighted the applicability of this strategy in the late-stage modification of pharmaceuticals. Moreover, the acyclic allylic alcohol with an alkyl chain also successfully delivered the migration product 3ar in 64% yield.Substrate scope of 2-azidoallyl alcohols^ab

Direct synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines from propargyl sulfonylamides and allenamides

Multisubstituted pyrroles are important fragments that appear in many bioactive small molecule scaffolds. Efficient synthesis of multisubstituted pyrroles with different substituents from easily accessible starting materials is challenging. Herein, we describe a metal-free method for the preparation of pentasubstituted pyrroles and hexasubstituted pyrrolines with different substituents and a free amino group by a base-promoted cascade addition–cyclization of propargylamides or allenamides with trimethylsilyl cyanide. This method would complement previous methods and support expansion of the toolbox for the synthesis of valuable, but previously inaccessible, highly substituted pyrroles and pyrrolines. Mechanistic studies to elucidate the reaction pathway have been conducted.

This method is a toolbox for the synthesis of valuable, but previously inaccessible, highly substituted pyrroles and pyrrolines.

Pyrroles are molecules of great interest in a variety of compounds including pharmaceuticals, natural products and other materials. Pyrrole fragments for example are key motifs in bioactive natural molecules, forming the subunit of heme, chlorophyll and bile pigments, and are also found in many clinical drugs, including those in Fig. 1a.¹ Although many classical methods of pyrrole synthesis, including the Paal–Knorr condensation,² the Knorr reaction,³ the Hantzsch reaction,⁴ transition metal-catalyzed reactions,⁵ and multicomponent coupling reactions,⁶ have been developed over many years, the efficient synthesis of multisubstituted pyrroles is still challenging. In condensation syntheses of pyrroles, the major problems lie in the extended syntheses of complex precursors and limited substitution patterns that are allowed. Multicomponent reactions are superior when building pyrrole core structures with more substituents. Among these, the [2+2+1] cycloaddition reaction of alkynes and primary amines is attractive because of the readily available alkyne and amine substrates and the ability to construct fully substituted pyrroles.⁷ However, with the exception of some rare examples,⁸ most [2+2+1] cycloaddition reactions afford pyrroles with two or more identical substituents. The synthesis of multisubstituted pyrroles with all different substituents from simple starting materials therefore remains a major challenge.Open in a separate windowFig. 1Previous reports and this work on propargylamides transformation.Easily accessible propargylamides are classical, privileged building blocks broadly utilized for the synthesis of a large variety of heterocyclic molecules such as pyrroles, pyridines, thiazoles, oxazoles and other relevant organic frameworks.⁹ For example, Looper¹⁰et al. reported the synthesis of 2-aminoimidazoles from propargyl cyanamides and Eycken¹¹ reported a method starting from propargyl guanidines which undergo a 5-exo-dig heterocyclization as shown in Fig. 1b. Subsequently, Wan¹²et al. revealed the cyclization of N-alkenyl propargyl sulfonamides into pyrroles via sulfonyl migration. Inspired by these transformations and multi-substituted pyrrole synthesis, we report herein a direct synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines with all different substituents from propargyl sulfonylamides and allenamides.Previously, Zhu,¹³ Ji¹⁴ and Qiu^13b,15 reported efficient syntheses of 2-aminopyrroles from isocyanides. Ye¹⁶ and Huang¹⁷ independently developed gold-catalyzed syntheses of 2-amino-pentasubstituted pyrroles with ynamides. Despite the many advantages of these methods, they all afford protected amines, rather than free amines. The deprotection of these amines may cause problems in further transformations of the products. Our method delivers pyrroles with an unprotected free amino group and are often complementary to the previously well-developed classical methods.Initially, the cyclization reaction of N-(1,3-diphenylprop-2-yn-1-yl)-N-ethylbenzenesulfonamide (1a) with trimethylsilyl cyanide (TMSCN) was carried out with Ni(PPh₃)₂Cl₂ as a catalyst, a base (Cs₂CO₃) and DMF as a solvent. Different metal catalysts, such as Ni(PPh₃)₂Cl₂, Pd(OAc)₂, Cu(OAc)₂, and Co(OAc)₂ provided the desired product with similar yields ( EntryCat.BaseSolventYield1Ni(PPh₃)₂Cl₂Cs₂CO₃DMF67%2Pd(OAc)₂Cs₂CO₃DMF65%3Cu(OAc)₂Cs₂CO₃DMF65%4Co(OAc)₂Cs₂CO₃DMF63%5Cs₂CO₃DMF65%6KFDMFTrace7K₃PO₄DMFTrace8K₂CO₃DMF48%9KOHDMF52%10KO^tBuDMF46%11Et₃NDMFTrace12Cs₂CO₃CH₃CN18%13Cs₂CO₃DME23%14Cs₂CO₃TolueneTrace15Cs₂CO₃DCETrace16Cs₂CO₃DioxaneTraceOpen in a separate window^aReaction conditions: 1a (0.1 mmol, 1 equiv.), TMSCN (0.3 mmol, 3 equiv.), cat. (0 or 10 mol%), base (0.3 mmol, 3 equiv.) and solvent (1 mL), at 80 °C for 10 h; isolated yield.With the optimal reaction conditions in hand, we investigated the scope of this reaction. As shown in Fig. 2, the transformation tolerates a broad variety of substituted propargylamides (1). The R¹ group could be an aryl group containing either electron-donating groups or electron-withdrawing groups, and the corresponding products (2b–2h) were obtained in yields of 62–80%. The substituent R¹ could also be an alkyl group such as 1-hexyl in which case the reaction provided the corresponding pyrrole (2i) in 53% yield. Exploration of the R² substituent was also conducted. Electron-rich and electron-deficient substituents in the aromatic ring of R² gave the desired products (2j–2o) with yields of 70–81%. The product bearing a furyl group (2p) can be produced in 61% yield. However, when R² group is an aliphatic group, the reaction failed to provide the desired product. Substituent groups R³, such as benzyl (2q) or 3,4-dimethoxyphenylethyl (2r) were also compatible in the reaction, providing the corresponding products in moderate yields. Significantly, this method has the potential to produce core structures (for example 2s) similar to that in Atorvastatin. Interestingly, when alkynyl substituted isoquinolines (1t–1v) were used as the substrates, the reactions smoothly afforded fused pyrrolo[2,1-α]isoquinoline derivatives (2t–2v), members of a class of compounds that are found widely in marine alkaloids and exhibit anticancer and antiviral activity.¹⁸Open in a separate windowFig. 2Substrate scope of propargylamides. Reaction conditions: 1 (0.20 mmol, 1 equiv.), TMSCN (0.60 mmol, 3 equiv.), Cs₂CO₃ (0.60 mmol, 3 equiv.) and DMF (2 mL), at 80 °C for 10 h; isolated yield.Allenes are key intermediates in the synthesis of many complex molecules.¹⁹ As a subtype of allenes, allenamines are also useful as reaction intermediates.²⁰ Although the transformation of allenamides to multisubstituted pyrroles has not been previously recorded, this reaction probably goes through the allenamide intermediates which can be derived from propargyl sulfonamides under basic conditions. To verify this hypothesis, the trisubstituted allenamide (3) was synthesized and subjected to the standard reaction conditions. A pyrrole (2a) was isolated in 82% yield from this reaction (Fig. 3). This result confirmed our assumption and raised a new question: is it possible to build hexasubstituted pyrrolines from tetrasubstituted allenamides? A range of tetrasubstituted allenamides²¹ was tested under the standard reaction conditions, and the hexasubstituted pyrrolines were obtained as is shown in Fig. 4. The R¹ group could be an aryl substituent or an alkyl chain, and the corresponding products (5a–5e) were obtained with good yields. Various aryl groups with either electron-donating groups or electron-withdrawing groups in the aromatic ring of R² provided the desired products (5f–5k) in 62–83% yields. In addition, the difluoromethyl group can also be replaced by a phenyl group, and the reaction provided the corresponding product 5l in 82% yield. It is worth noting that these pyrroline products are not easily accessible from other methods.Open in a separate windowFig. 3Synthesis of substituted pyrroles from allenes.Open in a separate windowFig. 4Substrate scope of tetrasubstituted allenamides. Reaction conditions: 4 (0.10 mmol, 1 equiv.), TMSCN (0.30 mmol, 3 equiv.), K₂CO₃ (0.30 mmol, 3 equiv.) and DMF (1 mL), at 80 °C for 10 h, isolated yield.Some synthetic applications of this method are shown in Fig. 5. The amide is a naturally occurring and ubiquitous functional group. When using benzoyl chloride to protect the free amino group of the fully-substituted pyrrole (2a), a bis-dibenzoyl amide (6) was obtained in the presence of a base, triethylamine while the monobenzoyl protected amide (7) was obtained in the presence of pyridine as the base (Fig. 5a). This method also provides a straightforward approach to pyrrole fused lactam structures (Fig. 5b). For examples, a five-membered lactam and a six-membered lactam were generated separately in a one pot reaction, directly from, (8 and 10), respectively. Taking advantage of this method, an analogue of the drug Atorvastatin was synthesized in 5 steps (Fig. 5c), demonstrating the synthetic value of the reaction.Open in a separate windowFig. 5Synthetic applications.Mechanistic experiments were performed (Fig. 6) to explore the mechanism of the reaction. When 3 equivalents of TEMPO were added, the reaction was not inhibited and the desired product (2a) was formed in 62% yield (Fig. 6a). This result suggested that the reaction might not involve a radical process. To probe the reaction further, a kinetic study was conducted (Fig. 6b). According to this study, the propargylamide (1a) was completely converted to an allenamide (3a) in 10 min under the standard conditions. The multi-substituted pyrrole (2a) was then gradually produced from the intermediate allenamide and no other reaction intermediates were observed or identified. On the other hand, DFT calculations of substrates 3b and 4a were carried out at the B3LYP-D3(SMD)/Def2-TZVP//B3LYP-D3/Def2-SVP level of theory to identify the natural bond orbital (NBO) charges on the carbons of the allene moieties. NBO charges on the internal carbon in both 3b and 4a are 0.11 and 0.18, respectively (Fig. 6c) indicating that the nucleophilic addition of cyanide anion onto the internal carbon should be reasonable as opposed to its addition onto the terminal carbon. Pathways of the cyano addition to 3b were also calculated (Fig. 6d). The transition state of cyano addition on the internal carbon (TS1), is indeed much lower than addition on the terminal carbon (TS2). The intermediate of internal carbon addition int1, is more stable than int2, implying that the internal carbon addition pathway is not only kinetically but also thermodynamically favoured.Open in a separate windowFig. 6Mechanistic studies and proposed mechanism.Based on the results of these mechanistic studies, a plausible reaction mechanism for the synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines is proposed and is shown in Fig. 6e. First, under basic conditions, the propargylamide isomerizes to an intermediate allenamide (A), which can be attacked nucleophilically by the cyanide anion to afford an intermediate imine (B) with release of the sulfonyl group. Then, the second cyanide anion attacks the imine to form an intermediate (C), which can undergo cyclization and protonation to afford the fully substituted pyrrole (2). Similarly, the hexasubstituted pyrroline product (5) can be obtained from double nucleophilic attack of the intermediate (A) by the cyanide ion.     

Palladium/GF-Phos-catalyzed asymmetric carbenylative amination to access chiral pyrrolidines and piperidines

The cross-coupling of N-tosylhydrazones has emerged as a powerful method for the construction of structurally diverse molecules, but the development of catalytic enantioselective versions still poses considerable challenges and only very limited examples have been reported. We herein report an asymmetric palladium/GF-Phos-catalyzed carbenylative amination reaction of N-tosylhydrazones and (E)-vinyl iodides pendent with amine, which allows facile access to a range of chiral pyrrolidines and piperidines in good yields (45–93%) with up to 96.5 : 3.5 er. Moreover, mild conditions, general substrate scope, scaled-up preparation, as well as the efficient synthesis of natural product (−)-norruspoline are practical features of this method.

An efficient asymmetric palladium/GF-Phos-catalyzed carbenylative amination reaction to access structurally diverse chiral pyrrolidines and piperidines in good yields with high chemo-, regio- and enantioselectivities has been developed.

N-tosylhydrazones, readily prepared from aldehydes or ketones, served as a safe source of carbene precursors and have attracted much attention of chemists.¹N-tosylhydrazone-mediated applications have been continuously developed, such as cyclopropanation or cyclopropenation, X–H insertion, ylide formation, cycloaddition, aza-Wacker-type cyclization, asymmetric allylic substitution, etc.² Among them, transition-metal-catalyzed cross-coupling is one of the powerful protocols for C–X or C C bond formation in organic synthesis involving versatile intermediates, of which in situ generation of diazo compounds and carbene migratory insertion are considered key steps.^3–5 Over the past decades, considerable progress has been made in the asymmetric cross-coupling reactions of N-tosylhydrazones with various coupling partners, including cyclobutanols, terminal alkynes, silacyclobutanes and so on.⁴ Relatively, only a few examples focus on the cross-coupling reactions of aryl halides with N-tosylhydrazones involving benzyl metal intermediates [Scheme 1A, eqn. (a)].⁶ For example, Gu,^6a Wu,^6b Lassaletta^6c and coworkers have developed a palladium-catalyzed asymmetric synthesis of axial chiral compounds from aryl bromides and N-tosylhydrazones, ending with β-H elimination. Very recently, we realized palladium/GF-Phos catalyzed asymmetric three component cross-coupling reactions of aryl halides, N-tosylhydrazones, with terminal alkynes.^6f In contrast, much less progress has been made in N-tosylhydrazone-based carbenylative insertions from vinyl halides, which would generate a π-allylic metal intermediate followed by nucleophile attack, providing a unique approach for building C–X bonds, especially for N-heterocyclic compounds [Scheme 1A, eqn. (b)].⁷N-heterocycles are important structural motifs for the development of various types of valuable chemicals and materials.⁸ Importantly, optically active 2-substituted pyrrolidine and piperidine derivatives are privileged scaffolds in many natural products and pharmaceuticals with a wide range of biological activities,⁹ as well as the backbone of organocatalysts in asymmetric catalysis (Fig. 1).¹⁰Open in a separate windowScheme 1Asymmetric transition-metal-catalyzed carbenylative cross-coupling reactions.Open in a separate windowFig. 1Selected natural products and pharmaceuticals containing chiral 2-substituted pyrrolidine and piperidine units.Notably, Van Vranken and coworkers reported an elegant palladium-catalyzed carbenylative amination reaction of N-tosylhydrazones and (E)-vinyl iodides pendent with amine, providing facile access to pyrrolidine and piperidine ring systems that are common to alkaloid natural products (Scheme 1B).¹¹ Unfortunately, only up to 58.5 : 41.5 er was obtained after they made a lot of efforts to screen a series of chiral phosphine ligands, indicating that this asymmetric reaction indeed poses considerable challenges in addition to competitive side reactions such as the dimerization of vinyl iodides,¹² the formation of diene via the palladatropic rearrangement/β-H elimination or allene via β-H elimination from C_sp²,¹³ and the π-allylpalladium intermediate trapped by the byproduct sulfinic acid salt.¹⁴ Given the significance of chiral pyrrolidines and piperidines as core structures in alkaloid natural products, the development of an asymmetric version of this elegant carbenylative amination reaction is highly desirable. In recent years, our group has developed a series of chiral sulfinamide phosphine ligands (so-called Sadphos), which showed unique potential in asymmetric transition-metal catalysis,^6f,15 so we wondered whether Sadphos could address this challenging asymmetric carbenylative amination reaction (Scheme 1C).Initially, our study began with (E)-vinyl iodide 1a and N-tosylhydrazone 2a in the presence of Pd₂(dba)₃, t-BuOLi, Et₃N, and triethylbenzylammonium chloride (TEBAC) in THF at 30 °C. A series of commercially available chiral ligands were first screened (Fig. 2). Only (R, R)-DIOP (L1), (R)-DTBM-SegPhos (L3) and (R)-MOP (L4) provided the desired product 3aa with poor enantioselectivity and other ligands such as (R, R)-Ph-BPE (L2), (R, S)-Josiphos (L5) and (S, S)-ⁱPr-FOXAP (L6) showed low reactivity. We next turned to systematically investigate Sadphos, such as Wei-Phos,¹⁶ Xiao-Phos,^15d,17 Ming-Phos,^15a,18 Xu-Phos,^15b,19 Xiang-Phos²⁰ and PC-Phos^15c,21 (Fig. 2). To our delight, PC1 delivered 3aa in 32% yield and 85.5 : 14.5 er. Inspired by this result, we further screened PC2–PC5 which vary in the substituent of phenyl, but unfortunately none of them showed better results. Surprisingly, the reactivity of this reaction could be greatly improved with our recently developed GF-Phos GF1, delivering 71% yield. When steric hindered tert-butyl groups were introduced on the phenyl group (GF2), the product 3aa was obtained in 77% yield with 91.5 : 8.5 er. After screening different palladium catalysts and solvents (Open in a separate windowFig. 2Screened chiral ligands.Optimization of reaction conditions^a

Rh(iii)-catalyzed tandem annulative redox-neutral arylation/amidation of aromatic tethered alkenes

Transition-metal-catalyzed directed C–H functionalization has emerged as a powerful and straightforward tool to construct C–C bonds and C–N bonds. Among these processes, the intramolecular annulative alkene hydroarylation reaction has received much attention because this intramolecular annulation can produce more complex and high value-added structural motifs found in numerous natural products and bioactive molecules. Despite remarkable progress, these annulative protocols developed to date remain limited to hydroarylation and functionalization of one side of alkenes, thus largely limiting the structural diversity and complexity. Herein, we developed a rhodium(iii)-catalyzed tandem annulative arylation/amidation reaction of aromatic tethered alkenes to deliver a variety of 2,3-dihydro-3-benzofuranmethanamine derivatives bearing an all-carbon quaternary stereo center by employing 3-substituted 1,4,2-dioxazol-5-ones as an amidating reagent to capture the transient C(sp³)–Rh intermediate. Notably, by simply changing the directing group, a second, unsymmetrical ortho C–H amidation/annulation can be achieved to provide tricyclic dihydrofuro[3,2-f]quinazolinones in good yields.

A rhodium(iii)-catalyzed tandem annulative arylation/amidation reaction of aromatic tethered alkenes was developed to deliver a variety of 2,3-dihydro-3-benzofuranmethanamine derivatives.

Transition-metal-catalyzed C–H functionalization for the direct conversion of C–H bonds to C–C bonds and C–N bonds has evolved into a widespread and effective strategy for fine chemical production.¹ Among these processes, the hydroarylation of C–C double bonds via a C–H addition has been well-established and become an effective strategy to access synthetically useful structural motifs.¹ Recently, this alkene hydroarylation reaction has received much attention in an intramolecular fashion² (Scheme 1a) because this intramolecular annulation can produce more complex and high value-added structural motifs found in numerous natural products and bioactive molecules (Fig. 1).³ Despite remarkable progress in this area, most of the annulative protocols developed to date remain limited to one-component intramolecular alkene hydroarylation and functionalization of one side of alkenes. More challenging C–H arylation of intramolecular alkenes followed by a tandem coupling with a different coupling partner have unfortunately proven elusive thus far, thus largely limiting the structural diversity and complexity.Open in a separate windowFig. 1Representative bioactive 2,3-dihydrobenzofurans.Open in a separate windowScheme 1Transition-metal-catalyzed C–H functionalization to construct the C–C and C–N bonds.On the other hand, nitrogen-containing molecules have gained great attention due to their widespread presence in natural products and widespread use in pharmaceutical science.⁴ During the last two decades, transition-metal-catalyzed direct C(sp²)–H amination/amidation assisted by chelating directing group is a well-established strategy.⁵ Recently, several examples of C(sp³)–H amination/amidation have also been reported for the efficient installation of C–N bonds.^6,7 Mechanistically, the reaction is initiated by a chelation-assisted C–H metalation to form a C(sp³)–M species, which is then coupled with amination reagents to construct the C–N bonds.In this context, we wondered if a catalytic annulative C–H arylation of a O-bearing olefin-tethered arenes might be possible, thus leading to a C(sp³)–M intermediate, which upon capture with a amidation reagent to construct a new C–N bond and provide bioactive 2,3-dihydro-3-benzofuranmethanamine derivatives. Inherently, the tandem annulative 1,2-arylation/amidation of alkenes has several challenges. First, the resulting C(alkyl)–M intermediate is liable to undergo protonation to provide the alkene hydroarylation products.^1,2 Moreover, a potential competing β-H elimination of the resulting C(alkyl)–M intermediate also required to be suppressed. In addition, compared with the C(sp²)–M species, the resulting C(alkyl)–M species is relatively unstable and also has a low reactivity.To address these challenges and with our continuing interest in the Rh(iii)-catalyzed C–H functionalization,⁸ we introduced a Weinreb amide as a directing group and 3-substituted 1,4,2-dioxazol-5-ones as the amide sources⁹ to trigger a new tandem annulative 1,2-arylation/amidation of alkenes via a Rh(iii)-catalyzed C–H activation,¹⁰ providing a variety of synthetically challenging 2,3-dihydro-3-benzofuranmethanamine derivatives bearing an all-carbon quaternary stereo center (Scheme 1b). More importantly, through simply changing the directing group, a second, unsymmetrical ortho C–H amidation/annulation could be realized to provide tricyclic dihydrofuro[3,2-f]quinazolinone derivatives. This protocol provides a good complement to previously reported carboamination reactions.¹¹To begin our studies, Weinreb amide 1a was reacted with methyl dioxazolone 3a in the presence of various catalyst and AgSbF₆ at 70 °C in DCE (Table 1, entries 1–4). The use of [Cp*RhCl₂]₂ as the catalyst was found to be crucial to give the desired tandem annulative product 4a, with other catalysts, such as [Ru(p-cymene)Cl₂]₂, [Cp*IrCl₂]₂, and Cp*Co(CO)I₂, resulting in no desired product. Attempt to increase or lower the reaction temperature led to a slightly low yield (entries 5 and 6). Interestingly, when employing a NH–OMe amide 2a as the substrate and using 3 equivalent of 3a, a second, unsymmetrical ortho C–H amidation/annulation was achieved to provide the tricyclic dihydrofuro[3,2-f]quinazolinone 5a in 50% yield (entry 7). A screen of additives (entries 8–10) identified LiOAc as the optimal additive, affording the desired product 5a in 93% yield (entry 10). The Rh(iii) catalyst was found to be crucial for this tandem annulative arylation/amidation reaction, with no reactivity in its absence (entries 11 and 12).Optimization of reaction conditions^a

Benzannulation of isobenzopyryliums with electron-rich alkynes: a modular access to β-functionalized naphthalenes

Described here is a modular strategy for the rapid synthesis of β-functionalized electron-rich naphthalenes, a family of valuable molecules lacking general access previously. Our approach employs an intermolecular benzannulation of in situ generated isobenzopyrylium ions with various electron-rich alkynes, which were not well utilized for this type of reaction before. These reactions not only feature a broad scope, complete regioselectivity, and mild conditions, but also exhibit unusual product divergence depending on the substrate substitution pattern. This divergence allows further expansion of the product diversity. Control experiments provided preliminary insights into the reaction mechanism.

A substituent-controlled divergent benzannulation provides rapid access to various β-functionalized naphthalenes from electron-rich alkynes.

Functionalized naphthalenes are important structural motifs widely present in bioactive natural products, pharmaceuticals and functional materials.^1,2 They also serve as valuable intermediates in organic synthesis.³ Among them, naphthalenes bearing an electron-donating group (EDG) at the β-position (e.g., β-naphthols, β-naphthylamines, and β-naphthyl thioethers) are particularly versatile (Fig. 1).^2,3 For example, BINOL, which is derived from β-naphthol, is an extensively utilized synthetic precursor toward a wide range of privileged chiral ligands and catalysts.³ While various approaches have been developed for the synthesis of naphthalenes, efficient and selective de novo strategies toward these β-functionalized ones still remain in high demand. Moreover, to the best of our knowledge, a general and modular approach for rapid access to all these electron-rich β-functionalized naphthalenes remains unknown.⁴Open in a separate windowFig. 1Useful β-naphthol, β-naphthylamine, and β-naphthyl thioether units.Isobenzopyrylium ions are readily accessible and versatile intermediates in organic synthesis (Scheme 1).⁵ They are known to participate in cycloaddition reactions with diverse carbon–carbon double bonds or triple bonds for the synthesis of naphthalenes.^5,6 While extensive progress has been achieved in this topic, challenges still remain to be addressed. For example, the majority of these benzannulations with alkynes have to be executed at high temperature, except those intramolecular cases or with stoichiometric activators. Moreover, electron-rich alkynes have not been well explored as reaction partners for the benzannulations with isobenzopyrylium ions. Nevertheless, such reactions would provide expedient access to the valuable β-naphthol and β-napthylamine derivatives with diverse substitution patterns (Scheme 1). In this context, here we report our effort in achieving a general and modular strategy toward these electron-rich naphthalenes with high efficiency and regioselectivity under mild conditions. We also observed interesting selectivity divergence controlled by the substituent of the isobenzopyrylium substrates, giving rise to different types of naphthalene products (e.g., 2-hydroxy-1-naphthaldehydes, Scheme 1).Open in a separate windowScheme 1Benzannulation of isobenzopyryliums with electron-rich alkynes.We began our study with isochromene 1a as the isobenzopyrylium precursor. Siloxy alkyne 2a was first employed as the model electron-rich alkyne in view of the extraordinary versatility of this type of alkyne in various cyclization reactions, including benzannulation.^7–9 Various Brønsted and Lewis acids were evaluated as catalysts for this reaction. Unfortunately, most of them did not show obvious catalytic activity toward the formation of a naphthalene product (Table 1). These reactions either had little conversion or resulted in a mixture of undesired products. Nevertheless, further screening led to the identification of AgOTf and BF₃·OEt₂ as capable catalysts (entries 5–6), with the latter being superior, leading to the formation of naphthalene 3a as the major product (75% yield, entry 6). Increasing the catalyst loading to 20 mol% further improved the product yield to 85% (with an isolated yield of 81%, entry 7). Further increasing the catalyst loading proved to be not beneficial (entry 8). Notably, the use of substrate 1a′ bearing an ethoxy leaving group also provided an equally good result. Other solvents, such as toluene and MeCN, were also evaluated, but all gave lower product yields. Finally, it is worth noting that the mild conditions used here are in sharp contrast to the typical high temperature required for the previously known catalytic intermolecular benzannulations involving isobenzopyryliums and alkynes.^5dEvaluation of reaction conditions