Acyl complexes of molybdenum: structural and reactivity studies

The following structural peculiarities of the agostic acyl structure ₂R) (R = H, SiMe₃) and some characteristic chemical reactivity of the M-η²-acyl and iminoacyl linkage are described. (i) A structural comparison of the bonding parameters within three agostic acetyl Mo complexes containing the dithioacid ligand, indicates that the agostic interaction strengthens upon increasing the electron-releasing properties of the S-chelating ligand. (ii) The acyl-xanthate complex Mo(C(O)Me)(S₂COR)(CO)(PMe₃)₂ undergoes loss of a sulfur atom from the coordinated xanthate and coupling with the acyl ligand to form complexes containing coordinated alkoxythiocarbonyl and monothioacetate ligands. The latter can be metathetically replaced by KS₂COR. (iii) Upon heating at 70°C η²-acyl-dicarbonyl bispirazolilborate complexes of molybdenum of the type Mo(H₂B(pz^*)₂)(η²-C(O)Me)(CO)₂(PMe₃) (pz^* = 3,5-dimethyl-pyrazol-1-yl) yield functionalized acyl ligands derived from the stereo- and regioselective intramolecular addition of one of the B---H bonds of the H₂B(pz^*)₂ group across the C=O moiety of the η²-acyl group. (iv) The η²-acyl-isocyanide complexes {Mo}(η²-C(O)R)(CNR′) ({Mo} = Mo(H₂B(pz^*)₂)(CO)(PMe₃)) undergo irreversible thermal isomerization to the corresponding η²-iminoacyl-carbonyl derivatives {MO}(η²-C(NR′)R)(CO). This isomerization reaction follows first-order kinetics.     

Synthesis and reactivity of sulfido ruthenium carbonyl clusters

A survey of the structures and reactivity of ruthenium carbonyl cluster complexes containing sulfido ligands is presented and discussed.     

Gas-phase reactivity of ruthenium carbonyl cluster anions

Partially-ligated anionic ruthenium carbonyl clusters react with alkenes, arenes, and alkanes in the gas phase; the products undergo extensive C-H activation and lose dihydrogen and carbon monoxide under collision-induced dissociation conditions. Triethylsilane and phenylsilane are also reactive towards the unsaturated clusters, and oxygen was shown to rapidly break down the cluster core by oxidative cleavage of the metal-metal bonds. These qualitative gas-phase reactivity studies were conducted using an easily-installed and inexpensive modification of a commercial electrospray ionization mass spectrometer. Interpretation of the large amounts of data generated in these studies is made relatively straightforward by employing energy-dependent electrospray ionization mass spectrometry (EDESI-MS).     

Structure and reactivity of nitrogen-containing derivatives of carbonyl compounds

Conclusions The oscillopolarographic behavior of certain phenylhydrazones, semi- and thiosemicarbazones in buffered solutions was studied, and the possibility of oscillopolarographic monitoring of the conversions of aliphatic phenylhydrazones was demonstrated.Translated from Ivestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 292–296, February, 1967.     

Physical basis of the reactivity of carbonyl compounds

Summary By comparison of physical and chemical data an individual characteristic bonds it is shown that the chemical nature of these bonds is dependent on their physical state(the electron-nucleus interactions in them), which is manifested in the experimentally determined parameters of these bonds , E, and r. Taking carbonyl compounds as an example, we have shown that from the strictly correlated changes in these parameters in characteristic bonds it is possible to make an estimate, on an experimental basis, of the electron displacements in the bonds as factors determining the reactivities of these bonds and as factors expressing the structure of the molecule and the mutual effects of its atoms.     

Metal telluride clusters composed of niobocene carbonyl, telluride, and cobalt carbonyl units: syntheses, structures, and reactivity

Abstract: The reaction of [Cp#2NbTe2H] (1#; Cp# = Cp* (C5Me5) or Cp(x) (C5Me4Et)) with two equivalents of [Co2(CO)8] gives a series of cobalt carbonyl telluride clusters that contain different types of niobocene carbonyl fragments. At 0 degrees C, [Cp#2NbTe2CO3(CO)7] (2#) and [Co4Te2(CO)10] (3) are formed which disappear at higher temperatures: in boiling toluene a mixture of [cat2][Co9Te6(CO)8] (5#) (cat= [Cp#2Nb(CO)2]+) and [cat2][Co11Te7(CO)10] (6#) is formed along with [cat][Co(CO)4] (4#). Complexes 6# transform into [cat][Co11Te7(CO)10] (7#) upon interaction with HPF6 or wet SiO2. The molecular structures of 2(Cp(x)), 4(Cp(x)), 5(Cp*), 6(Cp*) and 7(Cp*) have been determined by X-ray crystallography. The structure of the neutral 2(Cp(x)) consists of a [Co3(CO)6Te2] bipyramid which is connected to a [(C5Me4Et)2Nb(CO)] fragment through a mu4-Te bridge. The ionic structures of 4(Cp(x)), 5(Cp*), 6(Cp*) and 7(Cp*) each contain one (4, 7) or two (5, 6) [Cp#2Nb(CO)2]+ cations. Apart from 4, the anionic counterparts each contain an interstitial Co atom and are hexacapped cubic cluster anions [Co9Te6(CO)8]2- (5) or heptacapped pentagonal prismatic cluster anions [Co11Te7(CO)10]n- (n=2: [6]2- , n=1: [7]-), respectively. Electrochemical studies established a reversible electron transfer between the anionic clusters [Co11,Te7(CO)10]- and [Co11Te7(CO)10]2in 6# and 7# and provided evidence for the existence of species containing [Co11Te7(CO),0] and [Co11Te7(CO)0]3-. The electronic structures of the new clusters and their relative stabilities are examined by means of DFT calculations.     

High-nuclearity iridium carbonyl clusters containing phenylgermyl ligands: synthesis, structures, and reactivity

The reaction of Ir4(CO)12 with Ph3GeH at 97 degrees C has yielded the new tetrairidium cluster complexes Ir4(CO)7(GePh3)(mu-GePh2)2[mu3-eta3-GePh(C6H4)](mu-H)2 (10) and Ir4(CO)8(GePh3)2(mu-GePh2)4 (11). The structure of 10 consists of a tetrahedral Ir4 cluster with seven terminal CO groups, two bridging GePh2) ligands, an ortho-metallated bridging mu3-eta3-GePh(C6H4) group, a terminal GePh3 ligand, and two bridging hydrido ligands. Compound 11 consists of a planar butterfly arrangement of four iridium atoms with four bridging GePh2 and two terminal GePh3 ligands. The same reaction at 125 degrees C yielded the two new triiridium clusters Ir3(CO)5(GePh3)(mu-GePh2)3(mu3-GePh)(mu-H) (12) and Ir3(CO)6(GePh3)3(mu-GePh2)3 (13). Compound 12 contains a triangular Ir3 cluster with three bridging GePh2), one triply bridging GePh, and one terminal GePh3 ligand. The compound also contains a hydrido ligand that bridges one of the Ir-Ge bonds. Compound 13 contains a triangular Ir3 cluster with three bridging GePh2 and three terminal GePh3 ligands. At 151 degrees C, an additional complex, Ir4H4(CO)4(mu-GePh2)4(mu4-GePh)2 (14), was isolated. Compound 14 consists of an Ir4 square with four bridging GePh2, two quadruply bridging GePh groups, and four terminal hydrido ligands. Compound 12 reacts with CO at 125 degrees C to give the compound Ir3(CO)6(mu-GePh2)3(mu3-GePh) (15). Compound 15 is formed via the loss of the hydrido ligand and the terminal GePh3 ligand and the addition of one carbonyl ligand to 12. All compounds were fully characterized by IR, NMR, single-crystal X-ray diffraction analysis, and elemental analysis.     

Synthesis and catalytic reactivity of mononuclear substituted tetramethylcyclopentadienyl molybdenum carbonyl complexes

The reactions of five dinuclear carbonyl complexes [(η ⁵-C₅Me₄R)Mo(CO)₃]₂ [R = allyl, ⁿ Bu, ^t Bu, Ph, Bz] with I₂ in chloroform solution gave the corresponding mononuclear substituted tetramethylcyclopentadienyl molybdenum carbonyl complexes [(η ⁵-C₅Me₄R)MoI(CO)₃] [R = allyl (1), ⁿ Bu (2), ^t Bu (3), Ph (4), Bz (5)]. The molecular structures of complexes 2, 3 and 5 were determined by X-ray diffraction analysis. The results show that the substituent in the ring can directly affect the Mo–I bond distances; the more sterically hindered the substituent, the longer the Mo–I bond. Friedel–Crafts reactions of aromatic compounds with a variety of alkylation reagents catalyzed by the complexes showed that all of these mononuclear molybdenum carbonyl complexes have catalytic activity in Friedel–Crafts alkylation reactions. Indeed, compared with traditional catalysts, these mononuclear metal carbonyl complexes have obvious advantages such as higher activities, mild reaction conditions, high selectivity, simple post-processing, and environmentally friendly chemistry.     

Formation and reactivity of metal carbonyl anions in the gas phase

The reactions of metal carbonyl anions (M(CO)_n^?; M = Cr, Mn and Fe; n = 1–3) with n-heptane, water and methanol were studied with use of a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer equipped with an external ion source. The M(CO)_n^? ions were formed in the FT-ICR cell by collision-induced dissociation of the most abundant primary ion generated by electron impact of the appropriate metal carbonyl compound present in the external ion source. The M(CO)_n^? ions were allowed subsequently to undergo non-reactive collisions with argon in order to remove possible excess internal/translational energy prior to the ion/molecule reaction. Only the Cr(CO)₃^?, Mn(CO)₃^? and Fe(CO)₂^? ions react with n-heptane. This reaction proceeds by loss of H₂ from the collision complex and the Cr(CO)₃^? and Fe(CO)₂^? ions react about three times more efficiently than the Mn(CO)₃^? ion. With water, Mn(CO)^? and Fe(CO)₃^? are unreactive, whereas the other ions react by loss of one or two CO molecules from the collision complex. The rate of the reaction with water decreases in the order Cr(CO)₃^?, Fe(CO)₂^?, Cr(CO)₂^?, Fe(CO)^?, Mn(CO)₃^? and Mn(CO)₂^?. With methanol, the Cr(CO)₂^? ion reacts by loss of two CO molecules from the collision complex, whereas loss of one CO molecule and elimination of CO + H₂ occur in the reaction with Cr(CO)₃^?. Competing loss of CO and one or two H₂ molecules occurs in the reactions of Mn(CO)₃^? and Fe(CO)₂^? with methanol. The rate of the reaction with methanol decreases in the order Cr(CO)₃^?, Fe(CO)₂^?, Cr(CO)₂^? and Mn(CO)₃^?.     

The synthesis and reactivity of some indenyl and bis-indenyl ruthenium carbonyl complexes

The reaction of [Ru₃(CO)₁₂] (1), with indene in refluxing xylene affords [{(η⁵-C₉H₇)Ru(CO)₂}₂] (2), in high yield. An analogous reaction of 1 with 2-phenylindene affords the expected dinuclear complex [{(η⁵-C₉H₆Ph)Ru(CO)₂}₂] (5), and a heptaruthenium cluster [(C₉H₄Ph)Ru₇(μ-H)(μ-CO)₂(CO)₁₆] (6). The indenyl ligand in compound 6 exhibits a novel bonding mode in which the benzenoid ring is μ₄,η¹:η¹:η²:η² bound to the cluster. Refluxing 1 with bis-indenyl methane affords the dinuclear complex [Ru₂(CO)₄{μ-(η⁵-C₉H₆)₂CH₂}] (7), which reacts with iodine via Ru-Ru bond cleavage to give [Ru₂I₂(CO)₄{(η⁵-C₉H₆)₂CH₂}] (8).     

The reactivity of 3-methyl-5-phenylisothiazole with carbonyl compounds

The reactivity of 3-methyl-5-phenylisothiazole with carbonyl compounds in the presence of n-butyllithium and the system lithium isopropylcyclohexylamide-N,N,N',N'-tetramethylethylendiamine (LICA-TMEDA) is studied. n-Butyllithium is found to lead to higher yields of the hydroxy derivatives of the isothiazole compound than LICA-TMEDA. Ring opening products are not detected under the reaction conditions used.     

The reactivity of ketyl and alkyl radicals in reactions with carbonyl compounds

A parabolic model of bimolecular radical reactions was used for analysis of the hydrogen transfer reactions of ketyl radicals: >C·OH+R¹COR²→>C=O+R¹R²C·OH. The parameters describing the reactivity of the reagents were calculated from the experimental data. The parameters that characterize the reactions of ketyl and alkyl radicals as hydrogen donors with olefins and with carbonyl compounds were obtained: >C·OH+R¹CH=CH₂→>C=O+R¹C·HCH₃; >R¹CH=CH₂+R²C·HCH₂R³→R²C·HCH₃+R²CH=CHR³. These parameters were used to calculate the activation energies of these transformations. The kinetic parameters of reactions of hydrogen abstraction by free radicals and molecules (adelhydes, ketones, and quinones) from the C−H and O−H bonds were compared. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2178–2184, November, 1998.     

Solid supported active esters as linkers: modification of reactivity using iron carbonyl complexes

The reactivity of three polymer-bound cyclohexadienoic acid active esters was modified by complexation with iron tricarbonyl in order to evaluate their potential use as linker systems for solid phase chemistry. The best results were obtained with the tetrafluorophenol ester, which was slowly cleaved when 1 equiv of amine was used, but could be rapidly cleaved with up to 94% yield when the amount of nucleophile was increased.