Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Intrinsic activity modulation and structural design of NiFe alloy catalysts for an efficient oxygen evolution reaction

NiFe alloy catalysts have received increasing attention due to their low cost, easy availability, and excellent oxygen evolution reaction (OER) catalytic activity. Although it is considered that the co-existence of Ni and Fe is essential for the high catalytic activity, the identification of active sites and the mechanism of OER in NiFe alloy catalysts have been controversial for a long time. This review focuses on the catalytic centers of NiFe alloys and the related mechanism in the alkaline water oxidation process from the perspective of crystal structure/composition modulation and structural design. Briefly, amorphous structures, metastable phases, heteroatom doping and in situ formation of oxyhydroxides are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted OER kinetics. Furthermore, the construction of dual-metal single atoms, specific nanostructures, carbon material supports and composite structures are introduced to increase the abundance of active sites and promote mass transportation. Finally, a perspective on the future development of NiFe alloy electrocatalysts is offered. The overall aim of this review is to shed light on the exploration of novel electrocatalysts in the field of energy.

Effective strategies to increase the intrinsic activity by electronic modulation and to increase the number of active sites by structural design are discussed for improving the oxygen evolution activities of NiFe alloys.     

Hierarchical Hollow Nanoprisms Based on Ultrathin Ni‐Fe Layered Double Hydroxide Nanosheets with Enhanced Electrocatalytic Activity towards Oxygen Evolution

The oxygen evolution reaction (OER) is involved in various renewable energy systems, such as water‐splitting cells and metal–air batteries. Ni‐Fe layered double hydroxides (LDHs) have been reported as promising OER electrocatalysts in alkaline electrolytes. The rational design of advanced nanostructures for Ni‐Fe LDHs is highly desirable to optimize their electrocatalytic performance. Herein, we report a facile self‐templated strategy for the synthesis of novel hierarchical hollow nanoprisms composed of ultrathin Ni‐Fe LDH nanosheets. Tetragonal nanoprisms of nickel precursors were first synthesized as the self‐sacrificing template. Afterwards, these Ni precursors were consumed during the hydrolysis of iron(II) sulfate for the simultaneous growth of a layer of Ni‐Fe LDH nanosheets on the surface. The resultant Ni‐Fe LDH hollow prisms with large surface areas manifest high electrocatalytic activity towards the OER with low overpotential, small Tafel slope, and remarkable stability.     

Oxygen Isotope Labeling Experiments Reveal Different Reaction Sites for the Oxygen Evolution Reaction on Nickel and Nickel Iron Oxides

Nickel iron oxide is considered a benchmark nonprecious catalyst for the oxygen evolution reaction (OER). However, the nature of the active site in nickel iron oxide is heavily debated. Here we report direct spectroscopic evidence for the different active sites in Fe‐free and Fe‐containing Ni oxides. Ultrathin layered double hydroxides (LDHs) were used as defined samples of metal oxide catalysts, and ¹⁸O‐labeling experiments in combination with in situ Raman spectroscopy were employed to probe the role of lattice oxygen as well as an active oxygen species, NiOO^?, in the catalysts. Our data show that lattice oxygen is involved in the OER for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. Moreover, NiOO^? is a precursor to oxygen for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. These data indicate that bulk Ni sites in Ni and NiCo oxides are active and evolve oxygen via a NiOO^? precursor. Fe incorporation not only dramatically increases the activity, but also changes the nature of the active sites.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

Deciphering Iron-Dependent Activity in Oxygen Evolution Catalyzed by Nickel–Iron Layered Double Hydroxide

Nickel iron oxyhydroxide is the benchmark catalyst for the oxygen evolution reaction (OER) in alkaline medium. Whereas the presence of Fe ions is essential to the high activity, the functions of Fe are currently under debate. Using oxygen isotope labeling and operando Raman spectroscopic experiments, we obtain turnover frequencies (TOFs) of both Ni and Fe sites for a series of Ni and NiFe layered double hydroxides (LDHs), which are structurally defined samples of the corresponding oxyhydroxides. The Fe sites have TOFs 20–200 times higher than the Ni sites such that at an Fe content of 4.7 % and above the Fe sites dominate the catalysis. Higher Fe contents lead to larger structural disorder of the NiOOH host. A volcano-type correlation was found between the TOFs of Fe sites and the structural disorder of NiOOH. Our work elucidates the origin of the Fe-dependent activity of NiFe LDH, and suggests structural ordering as a strategy to improve OER catalysts.     

Deciphering Iron‐Dependent Activity in Oxygen Evolution Catalyzed by Nickel–Iron Layered Double Hydroxide

Nickel iron oxyhydroxide is the benchmark catalyst for the oxygen evolution reaction (OER) in alkaline medium. Whereas the presence of Fe ions is essential to the high activity, the functions of Fe are currently under debate. Using oxygen isotope labeling and operando Raman spectroscopic experiments, we obtain turnover frequencies (TOFs) of both Ni and Fe sites for a series of Ni and NiFe layered double hydroxides (LDHs), which are structurally defined samples of the corresponding oxyhydroxides. The Fe sites have TOFs 20–200 times higher than the Ni sites such that at an Fe content of 4.7 % and above the Fe sites dominate the catalysis. Higher Fe contents lead to larger structural disorder of the NiOOH host. A volcano‐type correlation was found between the TOFs of Fe sites and the structural disorder of NiOOH. Our work elucidates the origin of the Fe‐dependent activity of NiFe LDH, and suggests structural ordering as a strategy to improve OER catalysts.     

Introducing Fe2+ into Nickel–Iron Layered Double Hydroxide: Local Structure Modulated Water Oxidation Activity

Exploring materials with regulated local structures and understanding how the atomic motifs govern the reactivity and durability of catalysts are a critical challenge for designing advanced catalysts. Herein we report the tuning of the local atomic structure of nickel–iron layered double hydroxides (NiFe‐LDHs) by partially substituting Ni²⁺ with Fe²⁺ to introduce Fe‐O‐Fe moieties. These Fe²⁺‐containing NiFe‐LDHs exhibit enhanced oxygen evolution reaction (OER) activity with an ultralow overpotential of 195 mV at the current density of 10 mA cm^?2, which is among the best OER catalytic performance to date. In‐situ X‐ray absorption, Raman, and electrochemical analysis jointly reveal that the Fe‐O‐Fe motifs could stabilize high‐valent metal sites at low overpotentials, thereby enhancing the OER activity. These results reveal the importance of tuning the local atomic structure for designing high efficiency electrocatalysts.     

The Effect of Interlayer Anion Grafting on Water Oxidation Electrocatalysis: A Comparative Study of Ni- and Co-Based Brucite-Type Layered Hydroxides,Layered Double Hydroxides and Hydroxynitrate Salts

The urge for carbon-neutral green energy conversion and storage technologies has invoked the resurgence of interest in applying brucite-type materials as low-cost oxygen evolution reaction (OER) electrocatalysts in basic media. Transition metal layered hydroxides belonging to the brucite-type structure family have been shown to display remarkable electrochemical activity. Recent studies on the earth-abundant Fe³⁺ containing mössbauerite and Fe³⁺ rich Co−Fe layered oxyhydroxide carbonates have suggested that grafted interlayer anions might play a key role in OER catalysis. To probe the effect of such interlayer anion grafting in brucite-like layered hydroxides, we report here a systematic study on the electrocatalytic performance of three distinct Ni and Co brucite-type layered structures, namely, (i) brucite-type M(OH)₂ without any interlayer anions, (ii) LDHs with free interlayer anions, and (iii) hydroxynitrate salts with grafted interlayer anions. The electrochemical results indeed show that grafting has an evident impact on the electronic structure and the observed OER activity. Ni- and Co-hydroxynitrate salts with grafted anions display notably earlier formations of the electrocatalytically active species. Particularly Co-hydroxynitrate salts exhibit lower overpotentials at 10 mA cm⁻² (η=0.34 V) and medium current densities of 100 mA cm⁻² (η=0.40 V) compared to the corresponding brucite-type hydroxides and LDH materials.     

Layered Double Hydroxide Nanosheets with Multiple Vacancies Obtained by Dry Exfoliation as Highly Efficient Oxygen Evolution Electrocatalysts

Layered double hydroxides (LDHs) with two-dimensional lamellar structures show excellent electrocatalytic properties. However, the catalytic activity of LDHs needs to be further improved as the large lateral size and thickness of the bulk material limit the number of exposed active sites. However, the development of efficient strategies to exfoliate bulk LDHs into stable monolayer LDH nanosheets with more exposed active sites is very challenging. On the other hand, the intrinsic activity of monolayer LDH nanosheets can be tuned by surface engineering. Herein, we have exfoliated bulk CoFe LDHs into ultrathin LDH nanosheets through Ar plasma etching, which also resulted in the formation of multiple vacancies (including O, Co, and Fe vacancies) in the ultrathin 2D nanosheets. Owing to their ultrathin 2D structure, the LDH nanosheets expose a greater number of active sites, and the multiple vacancies significantly improve the intrinsic activity in the oxygen evolution reaction (OER).     

自支撑NiFe LDHs@Co-OH-CO3纳米棒阵列电极用于碱性阴离子交换膜电解水

开发高效耐用的电极对碱性阴离子交换膜电解水（AEMWEs）制氢至关重要。在这项研究中,我们展示了一种高效且稳定的自支撑NiFe LDHs@Co-OH-CO₃/NF纳米棒阵列电极分别用于析氧反应（OER）和AEMWE的阳极。在这项工作中,我们将2D的镍铁层状双金属氢氧化物纳米片（NiFe LDHs）原位生长在1D的碱式碳酸钴纳米线上（Co-OH-CO₃/NF）,最终得到独特的纳米棒阵列复合结构电极。在三电极体系中,自支撑NiFe LDHs@Co-OH-CO₃/NF对OER具有良好的催化活性, 在1 mol·L^-1 KOH中, 当电流密度为20 mA·cm^-2时,过电位为215 mV。当自支撑NiFe LDHs@Co-OH-CO₃/NF作为AEMWE的阳极（70 ^oC,1 mol·L^-1 KOH）,在电流密度为0.5 A·cm^-2时, 电解电压为1.72 V,并且具有较好的稳定性。进一步的实验表征结果显示了自支撑NiFe LDHs@Co-OH-CO₃/NF的优异性能是其具有特殊的形貌结构。这是由于纳米棒阵列电极的三维分层结构可以有效防止纳米片团聚, 从而有利于电子转移,为水分解提供大量的边缘活性位点。     

One-Step Synthesis of NiFe Layered Double Hydroxide Nanosheet Array/N-Doped Graphite Foam Electrodes for Oxygen Evolution Reactions

Developing cost-effective and highly efficient oxygen evolution reaction (OER) electrocatalysts is vital for the production of clean hydrogen by electrocatalytic water splitting. Here, three dimensional nickel-iron layered double hydroxide (NiFe LDH) nanosheet arrays are in-situ fabricated on self-supporting nitrogen doped graphited foam (NGF) via a one-step hydrothermal process under an optimized amount of urea. The as prepared NiFe LDH/NGF electrode exhibits a remarkable activity toward OER with a low onset overpotential of 233 mV and a Tafel slope of 59.4 mV dec⁻¹ as well as a long-term durability. Such good performance is attributed to the synergy among the doping effect, the binder-free characteristic, and the architecture of the nanosheet array.     

Enhancing Electrocatalytic Activity through Liquid-Phase Exfoliation of NiFe Layered Double Hydroxide Intercalated with Metal Phthalocyanines in the Presence of Graphene

Earth-abundant transition-metal-based catalysts are attractive for alkaline water electrolysis. However, their catalytic properties are often limited by their poor electrical conductivity. Here, we present a strategy for enhancing the electrical conductivity of NiFe layered double hydroxide (LDH) in order to further improve its properties as an electrocatalyst for the oxygen evolution reaction (OER) in alkaline media. We show that NiFe LDH containing metal tetrasulfonate phthalocyanine in the interlayers between the NiFe oxide galleries can be coupled with graphene during liquid-phase exfoliation by taking advantage of their π-π stacking capabilities. A substantial enhancement in the electrocatalytic activity of NiFe LDH with respect to the OER was observed. Moreover, the activity and selectivity of the catalyst materials towards the oxygen reduction reaction were investigated, demonstrating that both the metal hydroxide layer and the interlayer species contribute to the electrocatalytic performance of the composite material.     

Hexa-peri-benzocoronene with two extra K-regions in an ortho-configuration

There are three possible isomers for hexa-peri-hexabenzocoronene (HBC) with two extra K-regions, but only two of them have been reported, namely with the meta- and para-configurations. Herein, we describe the synthesis of HBC 4 with two extra K-regions in the ortho-configuration, forming a longer zigzag edge compared with the other two isomers. The structure of 4 was validated by laser desorption/ionization time-of-flight mass analysis and nuclear magnetic resonance spectra, as well as Raman and infrared spectroscopies supported by density functional theory calculations. The optical properties of 4 were investigated by UV/vis absorption and ultrafast transient absorption spectroscopy. Together with the analysis of aromaticity, the influence of the zigzag edge on the π-conjugation pathway and HOMO–LUMO gaps of the three isomers were investigated.

We reported the synthesis of hexa-peri-benzocoronene (HBC) with two extra K-regions adopting an ortho-configuration. The systematical study provides deep insights about the effect of zigzag edge on the π-conjugated pathway and molecular design.     

In situ conversion builds MIL-101@NiFe-LDH heterojunction structures to enhance the oxygen evolution reaction

The construction of rich phase interfaces to increase active reaction area in hybrid materials is an excellent strategy to improve electrochemical performance. Under this guideline, MIL-101@OX-metal organic framework (MOF) is constructed by the "MOF on MOF" method, then converts to MIL-101@NiFe-layered double hydroxides (LDH) by in situ transformation in alkaline solution. MIL-101@NiFe-LDH shows excellent electrochemical water oxidation performance. It needs only an overpotential of 215 mV to drive 10 mA/cm² of oxygen evolution reaction (OER), which is less than that of NiFe-LDH, MIL-101. In addition, MIL-101@NiFe-LDH has the smallest Tafel slope (55.1 mV/dec) compared with NiFe-LDH (61.1 mV/dec), MIL-101 (150.8 mV/dec). The excellent water oxidation activity is due to the high phase interfaces derived from high specific surface area of MOF. This work offers an alternative method for making MOF/LDH heterostructures with an optimized phase interfaces and provides new insights for OER.     

电化学形成的PtFeNi合金与含缺陷NiFe LDHs载体之间的电荷转移实现高效水分解

氢气是一种能量密度高,可完全燃烧的清洁能源.发展绿色制氢技术对于解决全球环境污染,二氧化碳排放等环境问题具有重要意义.电化学水分解被认为是一种清洁高效的制氢手段,可自恰于可再生能源的波动性,具有效率高、响应快、氢气纯度高等优点.然而,由于电化学反应过电位大及动力学缓慢的原因,驱动电化学水分解的能量消耗巨大.因此,开发高...     

Energy-efficient hydrogen production coupled with methanol oxidation using NiFe LDH@NiMo alloy heterostructure

The traditional electrochemical water splitting is extremely restricted by the sluggish kinetics of the anodic oxygen evolution reaction (OER). In this context, replacing OER with a more thermodynamic favorable oxidation reaction, such as methanol oxidation reaction (MOR), is an effective strategy to improve the hydrogen evolution reaction (HER) efficiency while still obtaining some valuable by-products. In this work, nickel-iron layered double-hydroxide [NiFe LDH]@NiMo alloy heterostructure is synthesized by electrodeposition process and its bi-functional electrocatalytic activities for both hydrogen evolution reaction (HER) and methanol oxidation reaction (MOR) are evaluated. For the HER, the catalyst exhibits low overpotential of 82.5 mV at 100 mA/cm², with a Tafel slope of 61 mV/dec as well as splendid long-term stability. For the MOR, the required potential decreases by 74 mV at 100 mA/cm² compared to oxygen evolution reaction (OER). Moreover, 97% process yields toward value-added formic acid (HCOOH) are obtained at the anode, with a faradaic efficiency of approximately 100% for HER at the cathode. The superior catalytic performance results from the synergic contribution of NiFe LDH and NiMo alloy. The formation of NiFe LDH@NiMo alloy heterostructure leads to the redistribution of electrons among nickel (Ni), iron (Fe) and molybdenum (Mo) elements. Therefore, the charge transfer process has been greatly promoted. This study provides a scalable energy saving strategy for hydrogen energy development.     

Selective inhibition of the K+ efflux sensitive NLRP3 pathway by Cl− channel modulation

The NLRP3 inflammasome regulates production of the pro-inflammatory cytokines interleukin-1β (IL-1β) and IL-18, and contributes to inflammation exacerbating disease. Fenamate non-steroidal anti-inflammatory drugs (NSAIDs) were recently described as NLRP3 inflammasome inhibitors via chloride channel inhibition. Fenamate NSAIDs inhibit cyclooxygenase (COX) enzymes, limiting their potential as therapeutics for NLRP3-associated diseases due to established side effects. The aim here was to develop properties of the fenamates that inhibit NLRP3, and at the same time to reduce COX inhibition. We synthesised a library of analogues, with feedback from in silico COX docking potential, and IL-1β release inhibitory activity. Through iterative screening and rational chemical design, we established a collection of chloride channel inhibiting active lead molecules with potent activity at the canonical NLRP3 inflammasome and no activity at COX enzymes, but only in response to stimuli that activated NLRP3 by a K⁺ efflux-dependent mechanism. This study identifies a model for the isolation and removal of unwanted off-target effects, with the enhancement of desired activity, and establishes a new chemical motif for the further development of NLRP3 inflammasome inhibitors.

The NLRP3 inflammasome regulates production of the pro-inflammatory cytokines interleukin-1β (IL-1β) and IL-18, and contributes to inflammation exacerbating disease.     

Electrochemical oxidation of molecular nitrogen to nitric acid – towards a molecular level understanding of the challenges

Nitric acid is manufactured by oxidizing ammonia where the ammonia comes from an energy demanding and non-eco-friendly, Haber–Bosch process. Electrochemical oxidation of N₂ to nitric acid using renewable electricity could be a promising alternative to bypass the ammonia route. In this work, we discuss the plausible reaction mechanisms of electrochemical N₂ oxidation (N₂OR) at the molecular level and its competition with the parasitic oxygen evolution reaction (OER). We suggest the design strategies for N₂ oxidation electro-catalysts by first comparing the performance of two catalysts – TiO₂(110) (poor OER catalyst) and IrO₂(110) (good OER catalyst), towards dinitrogen oxidation and then establish trends/scaling relations to correlate OER and N₂OR activities. The challenges associated with electrochemical N₂OR are highlighted.

Electrochemical oxidation of N₂ to HNO₃ (N₂OR) is explored in conjunction with parasitic oxygen evolution reaction (OER) on a poor and a good OER catalyst, TiO₂ and IrO₂. We develop scaling relations to correlate OER and N₂OR activities on oxides.     

Metal–ligand cooperativity in the soluble hydrogenase-1 from Pyrococcus furiosus

Metal–ligand cooperativity is an essential feature of bioinorganic catalysis. The design principles of such cooperativity in metalloenzymes are underexplored, but are critical to understand for developing efficient catalysts designed with earth abundant metals for small molecule activation. The simple substrate requirements of reversible proton reduction by the [NiFe]-hydrogenases make them a model bioinorganic system. A highly conserved arginine residue (R355) directly above the exogenous ligand binding position of the [NiFe]-catalytic core is known to be essential for optimal function because mutation to a lysine results in lower catalytic rates. To expand on our studies of soluble hydrogenase-1 from Pyrococcus furiosus (Pf SH1), we investigated the role of R355 by site-directed-mutagenesis to a lysine (R355K) using infrared and electron paramagnetic resonance spectroscopic probes sensitive to active site redox and protonation events. It was found the mutation resulted in an altered ligand binding environment at the [NiFe] centre. A key observation was destabilization of the Ni_a³⁺–C state, which contains a bridging hydride. Instead, the tautomeric Ni_a⁺–L states were observed. Overall, the results provided insight into complex metal–ligand cooperativity between the active site and protein scaffold that modulates the bridging hydride stability and the proton inventory, which should prove valuable to design principles for efficient bioinspired catalysts.

Metal–ligand cooperativity is an essential feature of bioinorganic catalysis.