N‐(4‐Cyano­phenyl)‐α‐(4‐methoxy­phenyl)­nitro­ne

In the crystal structure of the title compound, 4‐cyano‐N‐(4‐methoxy­benzyl­idene)­phenyl­amine N‐oxide, C₁₅H₁₂N₂O₂, the 4‐methoxy­phenyl is approximately coplanar with the nitrone moiety but significantly rotated with respect to the 4‐cyano­phenyl moiety. The extent of this rotation is significantly different for the two crystallographically independent mol­ecules of the asymmetric unit [dihedral angles of 19.4 (1) and 26.5 (1)°]. The geometry about the C=N bond is Z. The two mol­ecules are related to one another by a pseudo inversion centre.     

Phenyl‐(2‐pyridyl)‐(3‐pyridyl)‐(4‐pyridyl)methane: Synthesis,Chiroptical Properties,and Theoretical Calculation of Its Absolute Configuration

The title compound, a prototypical chiral molecule based on a tetraarylmethane framework, has been synthesized in five steps from (2‐pyridyl)‐(3‐pyridyl)ketone. X‐ray crystallographic analysis revealed the tetraarylmethane framework of the molecule but did not determine the positions of the nitrogen atoms because the crystal is a racemic compound and the aryl groups are disordered in the crystal. The optical resolution of the title compound was achieved by chiral HPLC with a Chiralcel OD column. The CD spectra of the two fractions in acetonitrile exhibited opposite signs as expected for a pair of enantiomers. Their CD spectra are changed in 2 M HCl due to protonation. The calculated CD curve for the target molecule based on time‐dependent density functional theory (TDDFT) reproduces the experimental result very well, thus suggesting that the first eluted fraction is the R isomer in terms of absolute configuration.     

Two‐dimensional square‐grid frameworks formed by self‐associating copper(II) complexes with 1‐(3‐pyridyl)‐ and 1‐(4‐pyridyl)‐substituted butane‐1,3‐diones

In bis­[1‐(3‐pyridyl)butane‐1,3‐dionato]copper(II) (the Cu atom occupies a centre of inversion), [Cu(C₉H₈NO₂)₂], (I), and bis­[1‐(4‐pyridyl)butane‐1,3‐dionato]copper(II) methanol solvate, [Cu(C₉H₈NO₂)₂]·CH₃OH, (II), the O,O′‐chelating diketonate ligands support square‐planar coordination of the metal ions [Cu—O = 1.948 (1)–1.965 (1) Å]. Weaker Cu⋯N inter­actions [2.405 (2)–2.499 (2) Å], at both axial sides, occur between symmetry‐related bis­(1‐pyridylbutane‐1,3‐dion­ato)copper(II) mol­ecules. This causes their self‐organization into two‐dimensional square‐grid frameworks, with uniform [6.48 Å for (I)] or alternating [4.72 and 6.66 Å for (II)] inter­layer separations. Guest methanol mol­ecules in (II) reside between the distal layers and form weak hydrogen bonds to coordinated O atoms [O⋯O = 3.018 (4) Å].     

N‐(4‐Methoxy­benzyl­idene)‐N′‐(2‐pyridyl)­hydrazine

Molecules of the title compound (alternative name p‐methoxybenzaldehyde 2‐pyridyl­hydrazone), C₁₃H₁₃N₃O, adopt an E configuration about the azomethine C=N double bond. Molecules are almost planar, the dihedral angle between the pyridine and methoxy­phenyl rings being only 6.19 (12)°. Pairwise N—H⃛N hydrogen bonds [R(8) in graph‐set notation] link centrosymmetrically related mol­ecules into discrete pairs.     

Reactions of 1‐(3‐aryl‐3‐oxopropenyl)azulenes and 1‐cinnamoylazulenes with malononitrile: Synthesis of 1‐(2‐aryl‐4‐pyridyl)azulenes and 1‐(4‐aryl‐2‐pyridyl)azulenes

The reactions of 1‐formyl‐3‐methoxycarbonylazulene ( 1 ) with acetophenones 3a‐e gave 1‐(3‐aryl‐3‐oxopropenyl)‐3‐methoxycarbonylazulenes 4a‐e which reacted with malononitrile in the presence of sodium methoxide to afford 1‐(2‐aryl‐4‐pyridyl)‐3‐methoxycarbonylazulenes 9a‐d , except for 4′‐nitro‐substituted compounds. Heating of the compounds 9a‐d in 100% phosphoric acid yielded 1‐(2‐aryl‐4‐pyridyl)azulenes 10a‐d . In a similar manner, 1‐(4‐aryl‐2‐pyridyl)azulenes 12a‐1 and 1‐[4‐(2‐furyl)‐ and 4‐(2‐thienyl)‐2‐pyridyl)]azulenes 14a,b were obtained.     

2‐Amino‐4‐(4‐pyridyl)­pyrimidine and the 1:1 adduct with 4‐amino­benzoic acid

The structure of the title compound, C₉H₈N₄, comprises non‐planar mol­ecules that associate via pyrimidine N—H?N dimer R(8) hydrogen‐bonding associations [N?N 3.1870 (17) Å] and form linear hydrogen‐bonded chains via a pyrimidine N—H?N(pyridyl) interaction [N?N 3.0295 (19) Å]. The dihedral angle between the two rings is 24.57 (5)°. The structure of the 1:1 adduct with 4‐amino­benzoic acid, C₉H₈N₄·C₇H₇NO₂, exhibits a hydrogen‐bond­ing network involving COOH?N(pyridyl) [O?N 2.6406 (17) Å], pyrimidine N—H?N [N?N 3.0737 (19) and 3.1755 (18) Å] and acid N—H?O interactions [N?O 3.0609 (17) and 2.981 (2) Å]. The dihedral angle between the two linked rings of the base is 38.49 (6)° and the carboxyl­ic acid group binds to the stronger base group in contrast to the (less basic) complementary hydrogen‐bonding site.     

3‐(4‐Acetyl­phenyl)‐1‐(4‐nitro­phenyl)­triazene

The crystal structure of the title compound, C₁₄H₁₂N₄O₃, shows that the stereochemistry about the N=N double bond of the N=N—N(H) moiety is trans. The whole mol­ecule is almost planar (r.m.s. deviation = 0.0654 Å), the interplanar angle between the phenyl rings being 0.7 (1)° and the largest interplanar angle being that between the phenyl ring and the nitro group of the 4‐nitro­phenyl substituent [11.5 (2)°]. Intermolecular N—H⋯O interactions between mol­ecules related by translation give rise to chains along the [110] and [10] directions, and these chains are held together by N⋯O π–π interactions. An unequal distribution of the double‐bond character among the N atoms suggests a delocalization of π electrons over the diazo­amine group and the adjacent aryl substituents.     

1,1‐Bis­(phenyl­sulfonyl)‐1‐(pyridinio)­methanide

The title di­sulfonyl‐stabilized pyridinium yl­ide, C₅H₅N⁺–C⁻(SO₂C₆H₅)₂ or C₁₈H₁₅NO₄S₂, contains a near planar NCS₂ core. The structure suggests that the formal negative charge of the yl­ide C atom is delocalized to the S atoms rather than the N atom. Structural features of pyridinium yl­ides are briefly discussed.     

Bis[bis­(3‐phenyl­pyrazol‐1‐yl)­(pyrazol‐1‐yl)­methane]­copper(II) bis­(per­chlor­ate) acetonitrile disolvate

The title copper(II) complex, [Cu(C₂₂H₁₈N₆)₂](ClO₄)₂·2C₂H₃N, comprises two neutral substituted tris­(pyrazol‐1‐yl)­methane ligands bonded to a central Cu^II ion, which is positioned on a crystallographic inversion center. Six Cu—N bonds are arranged in a distorted octa­hedral fashion. The unsubstituted pyrazole rings on each ligand are oriented trans with respect to each other, inter­digitated with the two 3‐phenyl­pyrazole rings of the other ligand.     

Bis[1‐(pyridin‐2‐yl)­ethano­ne‐κN 4‐phenyl­thio­semicarbazonato‐κ2N4,S]­manganese(II)

One half of the mol­ecule of the title complex, [Mn(C₁₄H₁₃N₄S)₂], is related to the other half by a twofold axis passing through the Mn atom. This high‐spin Mn atom is six‐coordinated, in an octahedral geometry, by the azomethine N, the pyridyl N and the thiol­ate S atom of two planar 1‐­(pyridin‐2‐yl)­ethanone N(4)‐phenyl­thio­semicarbazone lig­ands. In the crystal, the mol­ecules are interconnected by N—­H?S and C—H?N interactions, forming a three‐dimensional network.     

Bis­[μ‐3{5}‐(2‐pyridyl)­pyrazolido]­bis­[(aceto­nitrile)copper(II)] diperchlorate

The title compound, [Cu₂(C₈H₆N₃)₂(C₂H₃N)₂](ClO₄)₂, con­tains a centrosymmetric dinuclear dication, with square‐pyrami­dal Cu^II centres linked by two 1,2‐pyrazolide bridging groups. There is a weak apical interaction between each Cu ion and a perchlorate O atom.     

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile, C₁₅H₁₀N₂S, (I), and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile, C₂₆H₂₄N₂S, (II), were prepared by base‐catalyzed reactions of the corresponding indole‐3‐carbox­aldehyde with thio­phene‐3‐aceto­nitrile. ¹H/¹³C NMR spectral data and X‐ray crystal structures of compounds (I) and (II) are presented. The olefinic bond connecting the indole and thio­phene moieties has Z geometry in both cases, and the mol­ecules crystallize in space groups P2₁/c and C2/c for (I) and (II), respectively. Slight thienyl ring‐flip disorder (ca 5.6%) was observed and modeled for (I).     

Monoclinic and triclinic forms of bis­[2‐hydroxy‐2,2‐bis(2‐pyridyl)­ethano­ato‐O1,N,N′]­nickel(II)

Reaction of pyridoin with nickel nitrate in methanol in air gives crystals of two forms of the title compound, [Ni(C₁₂H₉N₂O₃)₂]; a triclinic form with the Ni atom on an inversion centre and a monoclinic form with one mol­ecule in a general position in the asymmetric unit. Both forms show an octahedral nickel centre coordinated by two facial tridentate ligands with their O‐atom donors trans.     

Supra­molecular motifs in 1‐(2‐cyano­ethyl)thymine and 1‐(3‐cyano­propyl)­thymine

In both 1‐(2‐cyano­ethyl)thymine [systematic name: 3‐(5‐methyl‐2,4‐dioxo‐1,2,3,4‐tetra­hydro­pyrimidin‐1‐yl)propane­nitrile], C₈H₉N₃O₂, (I), and 1‐(3‐cyano­propyl)thymine [systematic name: 4‐(5‐methyl‐2,4‐dioxo‐1,2,3,4‐tetra­hydro­pyrimidin‐1‐yl)butane­nitrile], C₉H₁₁N₃O₂, (II), the core of the supra­molecular structure is formed by centrosymmetric dimers generated by N—H⋯O hydrogen bonds. Further weak hydrogen bonds of C—H⋯O and C—H⋯N types generate mol­ecular tapes and sheets that resemble those in uracil and its methyl derivatives. The steric hindrance that arises from the cyano­alkyl substituents perturbs the conformations of the tapes and sheets.     

1‐(2‐{4‐[6‐Hydro­xy‐2‐(4‐hydroxy­phenyl)­benzo­[b]­thiol‐3‐yl­carbonyl]­phenoxy}ethyl)­piperidinium chloride

The title compound, raloxifene hydro­chloride, C₂₈H₂₈NO₄S⁺·Cl^?, belongs to the benzo­thio­phene class of antiosteoporotic drugs. In the molecular cation, the 2‐phenol ring sustains a dihedral angle of 45.3 (1)° relative to the benzo­[b]­thio­phene system. The benzo­[b]­thio­phene and phenyl ring planes are twisted with respect to the carbonyl plane, with the smallest twist component occurring between the phenyl and carbonyl planes. The N atom bears the positive charge in the molecular cation and the piperidine ring adopts an almost perfect chair conformation. The Cl^? anion is involved in the formation of N—H?Cl and O—H?Cl intermolecular hydrogen bonds, which lead to the formation of a layer of molecular cations.     

6‐(3,4‐Di­fluoro­benzoyl)‐3‐[2‐(4‐pyridyl)­ethyl]‐1,3‐benzo­thia­zol‐2(3H)‐one

A new type of benzo­thia­zolinone derivative with potential pharmacological activity, viz. 6‐(3,4‐di­fluoro­benzoyl)‐3‐[2‐(4‐pyridyl)­ethyl]‐1,3‐benzo­thia­zol‐2(3H)‐one, C₂₁H₁₄F₂N₂O₂S, has been prepared and studied by NMR, IR and single‐crystal X‐ray diffraction techniques. The mol­ecule is not planar, the pyridine and di­fluoro­benzene moieties being located above and below the benzo­thia­zole ring system. The carbonyl O atoms are involved in an intramolecular hydrogen‐bond‐type interaction.     

(Z)‐3‐(1‐Methyl‐1H‐indol‐3‐yl)‐2‐(thio­phen‐3‐yl)­acrylo­nitrile

The title compound, C₁₆H₁₂N₂S, has been synthesized by base‐catalyzed condensation of 1‐methyl­indole‐3‐carbox­aldehyde with thio­phene‐3‐aceto­nitrile. The product assumes an approx­imately planar Z configuration. The mol­ecule has a thienyl‐ring flip disorder.     

Tetraaqua­bis[2‐(4‐pyridyl)ethanesul­fonato‐N]­zinc(II)

The title compound, [Zn(C₇H₈NO₃S)₂(H₂O)₄], has an octahedral coordination around the central Zn atom composed of two axial N atoms from the pyridine ligands and four equatorial O atoms of water mol­ecules, forming a monomeric centrosymmetric complex. The two Zn—N bond distances are 2.102 (3) Å, while the four Zn—O bond distances range from 2.114 (2) to 2.167 (2) Å. Packing is determined by hydrogen bonds formed by the water mol­ecules. The sulfonate group does not take part in coordination to the Zn atom.     

1‐Methyl‐1‐phenyl‐3‐[1‐hydroxy­imino‐2‐(succinimido)­ethyl]­cyclo­butane

In the title compound, C₁₇H₂₀N₂O₃, the cyclo­butane ring is puckered, with a dihedral angle of 19.11 (15)°. The 1‐phenyl and 3‐[1‐hydroxy­imino‐2‐(succinimido)­ethyl] groups are in cis positions. The mol­ecules are linked by O—H⋯O and C—H⋯π(benzene) interactions, forming a two‐dimensional network.     

1‐(4‐Bromo­phenyl)‐3‐(4‐methyl­phenyl)­prop‐2‐en‐1‐one

In the mol­ecule of the title compound, C₁₆H₁₃BrO, the two benzene rings are rotated in opposite directions with respect to the central C—C=C—C part of the mol­ecule. The phenone O atom deviates from the least‐squares plane of the mol­ecule by 0.300 (3) Å. In the crystal structure, mol­ecules are paired through C—H⋯π interactions. The molecular pairs along [001] are hydrogen bonded through three translation‐related co‐operative hydrogen bonds in the `bay area', forming molecular chains, which are further hydrogen bonded through C—H⋯Br weak interactions, forming (010) molecular layers. In the third direction, there are only weak van der Waals interactions. The co‐operative hydrogen bonds in the `bay area' are discussed briefly.