Production and Characterization of Zirconia (ZrO2) Ceramic Nanofibers by Using Electrospun Poly(Vinyl Alcohol)/Zirconium Acetate Nanofibers as a Precursor

Zirconia (ZrO₂) inorganic ceramic nanofibers were produced using electrospinning of the poly(vinyl alcohol)/zirconium acetate as a precursor followed by calcinating and sintering to decompose the polymer and turn the metal salt (zirconium acetate) into the metal oxide. Characterization of the nanofibers, including polymer thermal decomposition, chemical and crystal structure, phase transformations, and fiber morphology were investigated by simultaneous thermal analysis (STA), thermomechanical analysis (TMA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). The results showed that the polymer decomposition started at 250°C and zirconia nanofibers with different phases (tetragonal and monoclinic) were obtained by the calcination of the precursor nanofibers at various temperatures between 500°C and 1100°C. The initially crystallized zirconia phase, which formed at 500°C, was tetragonal and with increasing calcination temperature, zirconia nanofibers with increasing amount of monoclinic phase were formed. Consequently, at 1100°C, the tetragonal phase disappeared and was transformed to the monoclinic phase of the zirconia completely. Increasing the calcination temperature caused the fiber average diameter decrease and grain growth took place due to the removal of the polymer and organic groups; neighboring grains sintered to each other and formed fibers with a high aspect ratio. At 1100°C the grains size was about the same as the fiber diameter.     

Fabrication and Properties of Carbon Nanotube and Poly(vinyl alcohol) Composites

Dispersion of carbon nanotubes in a polymer matrix is one of the most critical issues in carbon nanotube/polymer composites. In this paper we discuss the considerable improvement in the dispersion of multiwalled carbon nanotubes (MWNTs) in poly(vinyl alcohol) (PVA) matrix that was attained through gum arabic treatment. The mechanical properties of these MWNT/PVA composites show that only 2 wt% nanotube loading increases the tensile modulus by more than 130%.     

Optimization of Electrospun Polyacrylonitrile/Poly(Vinylidene Fluoride) Nanofiber Diameter Using the Response Surface Method

Electrospinning of polyacrylonitrile/poly(vinylidene fluoride) (PAN/PVdF) was applied using Box–Benkhen experimental design to obtain a quantitative relationship between selected electrospinning parameters (namely applied voltage, solution concentration, and PVdF composition) and nanofiber diameter and standard deviation of nanofiber diameter. Important parameters in the model were determined by analysis of variance (ANOVA). The model was consequently used to find the optimal conditions that yield the minimum PAN/PVdF nanofiber diameter. The morphology and nanofiber diameter were investigated by field emission scanning electron microscopy (FESM). The range of produced nanofiber diameters was from 116 to 379 nm. It was concluded that the nanofiber diameter tended to increase with solution concentration and decrease with PVdF composition. The applied voltage had no significant effect on the nanofiber diameters. Nanofibers with smaller standard deviation in diameter could be obtained at lower solution concentrations and higher PVdF composition. The model predicted the minimum nanofiber diameter of 114 nm when the applied voltage was set at 19.7 kV, solution concentration set at 14.07 wt%, and the PVdF composition set at 58.78 wt%.     

Morphology and Properties of Poly(vinyl alcohol)/MMT Nanocomposite Prepared by Solid-state Shear Milling (S3M)

Poly(vinyl alcohol) (PVA)/montmorillonite (MMT) nanocomposites were prepared by combining solid-state shear milling (S³M) technology with melt intercalation. Compared with the composite obtained by simple melt intercalation, more MMT layers were exfoliated and apparently oriented along the injection molding direction in the nanocomposite prepared by combining S³M technology and melt intercalation, which greatly increased the orientation degree of MMT, resulting in the greater interactions between PVA and MMT layers. Simultaneously, this also promoted the orientation of PVA molecules and produced effective nucleation of the crystallization of PVA. Consequently, the thermal stability and mechanical properties of PVA were obviously improved. For instance, when the MMT content was 3 wt%, the tensile strength and modulus of the nanocomposite with MMT prepared by S³M were 98.9 MPa and 3.1 GPa, respectively, increasing by 52% and 63.2% compared with PVA.     

Poly(Butylene Terephthalate)/Single Wall Carbon Nanotubes Composite Nanofibers by Electrospinning

Poly(buthylene terephthalate)(PBT)/single wall carbon nanotubes (SWCNTs) composite nanofibers were prepared by electrospinning. The effect of carbon nanotubes on the morphology, crystallization, and mechanical properties of the electrospun composite nanofibers were investigated by SEM, DSC, and tensile testing, respectively. SEM observations indicated that the presence of SWCNTs resulted in finer nanofibers for lower loading; however, a broader distribution, especially for the higher diameter ranges was found for nanofibers with higher amounts of carbon nanotubes. SWCNTs accelerated crystallization and acted as a nucleating agent; the degree of crystallinity increased with increasing content of SWCNTs, followed by a moderate decrease at higher content. Specific tensile strength and modulus of the PBT/SWCNTs composite nanofibers mats were higher than that of neat PBT nanofibers mat. However, the elongation at break of composite nanofibers mats was lower than that of the neat PBT nanofibers mat.     

Synthesis and Characterization of Poly(vinyl pyrrolidone)/Reduced Graphene Oxide Nanocomposite

Poly(vinyl pyrrolidone) (PVP)/reduced graphene oxide (RGO) nanocomposites were synthesized by reducing graphene oxide in the polymer matrix at different temperatures. The effects of the GO content on the properties of the nanocomposites were investigated by Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). The degree of dispersion of GO in the PVP matrix was examined by field-emission scanning electron microscopy. The results showed that both GO and RGO were well dispersed in the PVP matrix. Under low filler content, the improvement of onset decomposition temperatures of PVP nanocomposites was not obviously observed, but the amounts of residual char of the PVP nanocomposites were clearly increased. In addition, the decomposition temperature peak values of the PVP nanocomposites were increased, while the peak was broadened.     

High-Performance Poly(vinyl alcohol) Nanocomposites Filled with Individual Montmorillonite Nanolayers

Filling poly(vinyl alcohol) (PVA) with clay, typically montmorillonite (MMT), has been proven to be an attractive option to meet the high-performance requirements of PVA-based materials. In previous reports MMT or organophilic MMT (OMMT) were directly used as fillers. As a result, both exfoliated and intercalated MMT structures coexisted in the resultant nanocomposites. However, there is still a large gap between these nanocomposites and ideally designed ones where individual clay nanolayers (CNLs) are expected to be uniformly dispersed in the PVA. With this in mind, an ameliorative solution casting process is proposed here to prepare PVA nanocomposites. For this purpose the CNLs were prepared ahead of time by exfoliation of MMT in water and then used as fillers. Assessment of the dispersion state of the CNLs in PVA revealed that they (≤5.0 wt%) were randomly and uniformly dispersed (down to the level of individual silicate layers) in and formed strong interfacial interactions with the PVA. This resulted in significantly enhanced physical properties of the resultant nanocomposites relative to neat PVA. In particular, a 104.7% increment in the yield stress was achieved with 5.0 wt% CNLs, much larger than the 15–70% increments of previous PVA nanocomposites using MMT or OMMT as fillers. Additionally, excellent optical clarity of the PVA was obtained for the nanocomposites.     

Liposomal Templating,Association with Mammalian Cells,and Cytotoxicity of Poly(vinyl alcohol) Physical Hydrogel Nanoparticles

The assembly, cellular internalization, and cytotoxicity of nanoparticles based on physical hydrogels of poly(vinyl alcohol) (PVA) are reported. PVA nanoparticles are assembled using a liposomal templating technique followed by removal of the lipids using isopropanol, a process that requires the presence of a custom‐made block copolymer, poly(vinyl alcohol‐b‐vinyl pyrrolidone), to avoid aggregation of the nanoparticles. Polymer hydrogelation is induced via incubation in aqueous isopropyl alcohol solution, which results in PVA hydrogel nanoparticles (PVA HNP) with excellent colloidal stability and stability towards disintegration over at least 24 h. Pristine PVA HNP are found to be remarkably stealth‐like and exhibit negligible cellular internalization. This feature is likely inherent with the low fouling nature of PVA and makes PVA HNP attractive for targeted drug delivery with a low level of association with non‐targeted cells and tissues. Blending PVA with varied amounts of collagen results in colloidal hydrogel particles with a well pronounced tendency towards association with mammalian cells, specifically hepatocytes and endothelial cells. The association of PVA HNP elicits minimal changes in cellular proliferation, making these novel hydrogel particles convenient tools for drug delivery applications and creation of implantable artificial organelles and sensors.     

Structure and Properties of Poly(vinyl chloride)/Halloysite Nanotubes Nanocomposites

Poly(vinyl chloride)(PVC)/halloysite nanotubes (HNTs) nanocomposites were prepared by melt blending. The effects of HNT content on the mechanical properties, morphology, and rheological properties of the nanocomposites were investigated. The results showed that HNTs were effective in toughening and reinforcing PVC nanocomposites. The notched impact, tensile and flexural strength, and flexural modulus of the nanocomposites were remarkably increased compared with those for the pure PVC. Scanning electron microscopy (SEM) results illustrated the ductile behavior of the nanocomposites, with a possible cavitation mechanism. Transmission electron microscopy (TEM) results showed that HNTs were uniformly dispersed in the PVC matrix. Interfacial interaction of hydrogen bonding between the HNTs and PVC matrix was substantiated. The plasticization times of PVC/HNTs nanocomposites were found to be shorter and the equilibrium torque was higher than that for the pure PVC.     

Study of the Thermal Decomposition Behavior of Poly(vinyl alcohol) with NaHSO4

The thermal decomposition behavior of poly(vinyl alcohol) (PVA) with NaHSO₄ at 280～290°C as well as the optical characteristics and the thermal stability of the resulting thermally decomposed PVA were investigated by means of UV-Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The results suggest that (1) the elimination reactions of side groups in PVA with NaHSO₄ can occur under our conditions resulting in formation of carbon–carbon double and triple bonds; (2) most of the carbon–carbon double bonds were conjugated; (3) the PVA thermally treated with NaHSO₄ could absorb light in the region of 190～600 nm; (4) the thermal stability of the resulting PVA was better than that of PVA without thermal treatment; and (5) compared with the thermal reaction of PVA without NaHSO₄, the addition of NaHSO₄ can promote the thermal elimination of side groups of PVA.     

Microstructure and Thermal and Tensile Properties of Poly(vinyl alcohol) Nanocomposite Films Reinforced by Polyacrylamide Grafted Cellulose Nanocrystals

Abstract

Polyacrylamide grafted cellulose nanocrystals (CNC-g-PAM) were incorporated into poly(vinyl alcohol) (PVA) by a solution casting method to fabricate nanocomposite films with enhanced thermal and tensile properties. The microstructure and the thermal and tensile properties of the PVA/CNC-g-PAM nanocomposite films were investigated as a function of CNC-g-PAM content. Infrared spectroscopy corroborated the presence of hydrogen bonds between PVA and the PAM on the surface of the CNC. Polarized optical microscopy and scanning electron microscopy revealed good dispersion of the CNC-g-PAM in the PVA matrix and good interfacial compatibility. Accordingly, the initial degradation temperature of the nanocomposite films was elevated slightly compared to pristine PVA film. The glass transition temperature, melting temperature, and crystallinity of the PVA also varied slightly after the incorporation of the CNC-g-PAM. At both 0% and 50% RH, the nanocomposite films showed an obvious increase of elastic modulus, no apparent change of breaking strength and a drastic reduction of elongation at break with increasing CNC-g-PAM content.     

Study on the Electrospinnability of Polyvinyl Alcohol Solutions by Using Water/N,N-dimethylacetamide or Water/N,N-dimethylformamide as Solvents

The electrospinning of poly(vinyl alcohol) (PVA) (99% hydrolysis degree) aqueous solution with added organic solvents N, N-dimethylacetamide (DMAc) or N, N-Dimethylformamide (DMF) was investigated. After the addition of the organic solvents to the PVA aqueous solutions, the surface tension and conductivity decreased and the viscosity significantly increased, which caused an improved electrospinnability of the PVA solutions. The micro-structures of the three solutions were investigated by dynamic light scattering (DLS), differential scanning calorimetry (DSC) and dynamic viscoelastic measurements. The DLS data revealed that the swelling of the PVA coils was slightly increased but the overlaps of PVA coils decreased greatly after one of the organic solvents was added to the aqueous solution. The DSC data showed both the water-rich phase and PVA-rich phase were destroyed and the solution became more homogenous after the addition due to the interaction between the organic solvent and water. Viscoelastic data showed there was an obvious difference in the storage modulus behavior between the aqueous solutions and the water/solvents solutions. These changes in the micro-structure and properties were the reason for the improved electrospinnability of the PVA solution. According to scanning electron microscopy (SEM), the average diameter of the electrospun PVA nanofibers was about 308 nm for the DMF/water system, and 255 nm for the DMAC/water system, as compared with uneven diameter nanofibers for the water system.     

Mechanical and Thermal Behavior of Blends of Poly(hydroxybutyrate-co-hydroxyvalerate) with Ethylene Vinyl Acetate Copolymer

Ethylene vinyl acetate copolymer (EVA), with vinyl acetate contents of 60% or 80%, was used to improve the mechanical properties of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV). Blends of PHBV/EVA were prepared with the ratios of 90:10, 70:30, and 50:50. Stress–strain results indicated that the tensile strength, elongation at break, Young's modulus, and toughness of PHBV blends could be adjusted by changing the composition of blends and miscibility. It was found that high elongation at break, ca. 200%, was obtained for PHBV/EVA80 (50:50).     

pH-Sensitive Poly(Vinyl Alcohol)/Sodium Carboxymethylcellulose Hydrogel Beads for Drug Delivery

A series of pH-sensitive hydrogel beads were prepared composed of poly(vinyl alcohol) (PVA) and sodium carboxymethylcellulose (CMC) by using Fe³⁺ crosslinking and freeze-thawing (FT) cycle techniques. The mixed solution of CMC and PVA was firstly crosslinked with Fe³⁺ to form beads and then subjected to freezing-thawing cycles for further crosslinking. The formation of hydrogel was confirmed by Fourier transform infrared spectroscopy (FTIR). The gelling rate in ferric solution and the swelling and pH-senstive properties of the hydrogel beads were investigated. The encapsulation efficiency and in-vitro release properties of beads were also evaluated using Bovine serum albumin as model drug. The pH sensitivity and the release rate increased with increasing CMC content. These results suggest that the PVA/CMC hgdrogel beads should be useful as pH-sensitive drug delivery systems for bioactive agents.     

一种高电导率PVA聚合物电解质的制备与表征

通过溶液浇注法制备了一种polymer in salt型PVA KOH H2O聚合物电解质.对该电解质进行了X射线衍射、热性质及电化学性质测试与分析.X射线衍射显示PVA和KOH在聚合物电解质中均以非晶态存在.随着KOH含量的增加,聚合物的玻璃转化点温度逐渐上升,而电解质电导率也随之增加.该电解质的电化学窗口可达1.4V,阻抗测试显示当电解质组成PVA/KOH为1/3(质量比)时,室温电导率可达0.15S/cm,电导率与温度关系符合Arrhenius方程.该电解质热力学稳定性好,机械强度高、电化学性质优越.     

Microstructures and Mechanical Properties of Poly(Trimethylene Terephthalate)/Maleic Anhydride Grafted Poly(Ethylene-octene)/Polypropylene Blends

A range of blends based on 70 wt% of poly(trimethylene terephthalate) PTT with 30 wt% dispersed phase were produced via melt blending. The dispersed phase composition was varied from pure maleic anhydride grafted poly(ethylene-octene) (POE-g-MA) over a range of POE-g-MA:polypropylene (PP) ratios. The micromorphology and mechanical properties of the ternary blends were investigated. The results indicated that the domains of the POE-g-MA are dispersed in the PTT matrix, and at the same time the POE-g-MA encapsulate the PP domains. The interfacial reaction between the hydroxyl-end group of PTT and maleic anhydride (MA) during melt blending changes the formation from “isolated formation” to “capsule formation,” where the PP domains are encapsulated by POE-g-MA. Compared to the PTT/POE-g-MA blends, mechanical properties of ternary blends, such as tensile strength and Young's modulus, were improved significantly.     

Preparation of Poly (L-lactic Acid) Microsphere

Poly (L-lactic acid) (PLLA) microspheres were prepared by a solvent evaporation method based on an oil/water emulsion. The effect of the mass ratio of PLLA and poly(vinyl alcohol) (PVA) on the formation of the microspheres was discussed, and the influence of extraction speed of dichloromethane on the microsphere morphology was also studied. Moreover, the influences of the PLLA concentration and the volume ratio of water phase to dichloromethane phase were investigated. The results showed that stable microspheres can be obtained under the conditions that the mass ratio of PLLA to PVA is 20:1. Porous microspheres were obtained under faster evaporating speed of dichloromethane. The microsphere size increased with increasing PLLA concentration. The microsphere size also increased with the increase of the volume ratio of water phase to dichloromethane phase.     

Fabrication and Characterization of Ultrathin Graphene Oxide/Poly(Vinyl Alcohol) Composite Films via Layer-by-Layer Assembly

Novel multilayer ultrathin films comprised of graphene oxide (GO) and poly(vinyl alcohol) (PVA) were fabricated through a layer-by-layer (LBL) assembly technique. GO could self-assemble onto quartz substrates alternately with PVA via hydrogen-bonding interactions. X-ray diffraction, atomic force microscopy, and transmission electron microscopy analysis revealed that GO was exfoliated to monolayers. The ultrathin films, with PVA/GO multilayer structures fabricated by LBL assembly, were characterized by ultraviolet-visible spectroscopy and X-ray diffraction analysis, confirming that the assembly of the multilayer films was quantitative and reproducible.     

Blending Optimization of Non-Dioctyl Phthalate Plasticized Poly (vinyl chloride) Formulations

The use of non-ortho-phthalate plasticizers in poly (vinyl chloride) (PVC) packaging materials and medical devices has been in increasing demand due to worldwide regulatory trends to minimize or eliminate phthalate plasticizers (particularly di(2-ethylhexyl)phthalate (DEHP) or dioctyl phthalate (DOP)) in the PVC industry. This study evaluates the dry-blending cycle time of a suspension grade PVC formulated with various non-DOP plasticizers, di-(2-ethylhexyl) terephthalate (DEHT or DOTP), tris (2-ethylhexyl) trimellitate (TEHTM or TOTM) and alkyl sulphonic phenyl ester (ASE), and compares them with the DOP standard. A design of experiments was also conducted to study the critical dry-blending parameters for optimization of PVC formulated with only DEHT. Effects of PVC temperature (measured during plasticizer addition to the blender), plasticizer pre-heat temperature, plasticizer and lubricant concentrations and the method of plasticizer addition on the dry-blending cycle time and peak amperage of the blender were studied. The blending cycle time is shown to be related to the resultant plasticizer efficiency and the peak amperage is related to the power consumption (the energy required to mix the PVC).