Thermo-Sensitivity of poly-N-isopropylacrylamide with Statistically Introduced D,L-Allylglycine Betainic Units

Abstract

Statistical copolymers of N-isopropylacrylamide containing 2.2 – 2.7?mol % D,L-allylglycine were synthesized. The sample with 2.2?mol % allylglycine and molar mass 320000?g/mol was studied using light scattering and turbidimetry while heated in water and water–salt solutions. Temperature dependencies of light scattering intensity and optical transmission as well as hydrodynamic size and composition of the scattering entities were obtained in a wide range of pH. The onset temperatures of phase separation were independent of pH; however, in the basic pH region the phase transition was widened as compared to the neutral and acid media. It was shown that a small content of allylglycine results in a different thermoresponsive behavior of the copolymer as compared with N-isopropylacrylamide homopolymer. The addition of a physiological amount of NaCl shifts the copolymer thermo-sensitivity toward lower temperatures.     

Structure of colloidal complexes obtained from neutral/poly- electrolyte copolymers and oppositely charged surfactants

We report on the phase behavior and scattering properties of colloidal complexes made from block copolymers and surfactants. The copolymer is poly(sodium acrylate)-b-poly(acrylamide), hereafter abbreviated as PANa-PAM, with molecular weight 5000 g/mol for the first block and 30000 g/mol for the second. In aqueous solutions and neutral pH, poly(sodium acrylate) is a weak polyelectrolyte, whereas poly(acrylamide) is neutral and in good-solvent conditions. The surfactant is dodecyltrimethylammonium bromide (DTAB) and is of opposite charge with respect to the polyelectrolyte block. Combining dynamical light scattering and small-angle neutron scattering, we show that in aqueous solutions PANa-PAM diblocks and DTAB associate into colloidal complexes. For surfactant-to-polymer charge ratios Z lower than a threshold (Z(C) approximately 0.3), the complexes are single surfactant micelles decorated by few copolymers. Above the threshold, the colloidal complexes reveal an original core-shell microstructure. We have found that the core of typical radius 100-200 A is constituted from densely packed surfactant micelles connected by the polyelectrolyte blocks. The outer part of the colloidal complex is a corona and is made from the neutral poly(acrylamide) chains. Typical hydrodynamic sizes for the whole aggregate are around 1000 A. The aggregation numbers expressed in terms of numbers of micelles and copolymers per complex are determined and found to be comprised between 100-400, depending on the charge ratio Z and on the total concentration. We have also shown that the sizes of the complexes depend on the exact procedure of the sample preparation. We propose that the driving mechanism for the complex formation is similar to that involved in the phase separation of homopolyelectrolyte/surfactant systems. With copolymers, the presence of the neutral blocks prevents the macroscopic phase separation from occurring.     

Thermo-sensitive N-n-propylacrylamide gels

Thermo-sensitive gels were prepared by irradiating aqueous solutions of poly(N-n-propylacrylamide) (NNPA) and its copolymers with acrylic acid (AA) with γ-rays from a ⁶⁰Co source. The equilibrium swelling volume of the gel in water was determined as a function of temperature. NNPA gel showed a discontinuous and reversible volume phase transition. The transition temperature and the volume change at the transition decreased with irradiation time. The transition temperature was approximately 12°C lower than that of poly(N-isopropylacrylamide) gel. A discontinuous volume transition was also observed in the copolymer gels of NNPA and AA. The dependence of the transition temperature on the concentration of carboxyl groups revealed a marked difference depending on whether they were protonated or dissociated. For gels having side groups of COONa, the transition temperature rose and the volume change at the transition was elevated as the COONa concentration increased. In contrast, an increase in the COOH concentration resulted in a decrease in the transition temperature. These results are discussed in terms of an equation of state constructed based on scaling theory.     

Aggregation Behavior of Copolymer Containing Sulfobetaine Structure in Aqueous Solution

Copolymers containing sulfobetaine (P(AM/DMAPS)) were synthesized by aqueous copolymerization of acrylamide with 3-[N-(2-methacroyloylethyl)-N,N- dimethylammonio]-propane sulfonate. Aggregation and disaggregation of P(AM/ DMAPS) copolymer in aqueous solution as a function of copolymer concentration, added salts, and temperature were studied by dynamic laser light scattering. P(AM/DMAPS) copolymers exist as a mixture of individual chains and interchain aggregation in deionized water. At low copolymer concentrations (below 1.0 g L^?1), the intrachain aggregation is dominant. With increasing copolymer concentration, the interchain aggregation is enhanced. The addition of a small amount of salts (C_NaCl < 0.1 mol L^?1; C_MgCl2/CaCl2 < 0.05 mol L^?1) leads to the disaggregation of the intra- and interchain aggregation. Further addition of salts results in the enhancement of interchain aggregation. The influence of various cations (Na⁺, Ca²⁺, Mg²⁺) on the aggregation behavior increases in the order Na⁺ < Ca²⁺ < Mg²⁺. The increase of temperature from 25°C to 60°C facilitates the breakup of intrachain aggregation and the enhancement of interchain aggregation.     

Investigation of W/O microemulsion droplets by contrast variation light scattering

Dynamic and static light scattering experiments have been performed at various molar ratios (γ) of water to AOT and temperatures on water-in-oil (W/O) microemulsions dispersed in n-heptane, n-octane, and n-nonane. Size and shape fluctuations of microemulsion droplets are determined with very high precision because polydispersity influences the characteristic features of scattering data as well as the hydrodynamic radius withγ. Self-consistent interpretation of dynamic and static light scattering data using optical properties and packing consideration on the basis of the layered sphere model are obtained. The estimated extent of polydispersity index of 17% is found, whereas the polydispersity is independent of the alkane types. The geometrical parameters, e.g., hydrodynamic radius, area per head group of the surfactant molecule and thickness of the surfactant layer of microemulsion droplets are also estimated and compared in three different n-alkane types. The best interpretation of the temperature dependence of data has shown a transition from spherical droplets to ellipsoid aggregates with increasing temperature. Axial ratio increases with increase of temperature and the longer the alkane the larger is the axial ratio. The parameters describing the polydispersity and shape change are in agreement with theoretical and experimental results found in the literature     

Characterization of Nanoparticles and Colloids in Aquatic Systems 1. Small Angle Neutron Scattering Investigations of Suwannee River Fulvic Acid Aggregates in Aqueous Solutions

Fulvic acids (FA) and humic acids (HA) constitute 30–50% of dissolved organic matter in natural aquatic systems. In aqueous solutions, a commonly accepted view is that FA and HA exist as soluble macroligands at low concentration and as supramolecular aggregates at higher concentration. The size, shape and structure of these aggregates are still the subject of ongoing debate in the environmental chemistry literature. In this article, we use small angle neutron scattering (SANS) to assess the effects of solute concentration, solution pH and background electrolyte (NaCl) concentration on the structures of Suwannee River FA (SRFA) aggregates in D₂O. The qualitative features of the SANS curves and data analysis are not consistent with the view point that SRFA forms micelle-like aggregates as its concentration in aqueous solution increases. We find that SRFA forms fractal aggregates in D₂0 with size greater than 242 nm. The SRFA aggregates undergo a significant degree of restructuring in compactness as solution pH, solute concentration and NaCl concentration increase.     

Thermal Behavior of Polyamide‐12 and Poly (Styrene‐Co‐Acrylonitrile) Blend

In this work, an unusual morphology of a mixture of polyamide‐12 (PA‐12) with a series of poly (styrene‐co‐acrylonitrile) (SAN) was obtained by solution casting and fast solvent evaporation. The prepared film was transparent although it contained many crystals. These crystals apparently prevented phase separation despite the instability of the PA‐12 and SAN mixtures below 180°C. In isothermal experiments, once the crystals were melted, phase separation began and the scattered intensity fit the Cahn–Hilliard theory. When the AN content in the SAN copolymer was less than 5%, the phase separation took place when only part of the crystals were melted at 180°C. However, due to the constraint of unmelted crystals, the growth rate of phase separation at this temperature was much slower.     

The Effect of Hydrophilic Bentonite Nanoclay on the Thermogelation Properties of Poly(N-isopropylacrylamide)-poly(ethylene glycol)-poly(N-isopropylacrylamide) Triblock Copolymer Aqueous Solutions

The effect of hydrophilic bentonite addition on the thermogelation properties of aqueous solutions of poly(N-isopropylacrylamide)–poly(ethylene glycol)–poly(N-isopropylacrylamide) (PNIPAM-PEG-PNIPAM) triblock copolymers of various compositions and molecular weights was investigated. Dynamic rheometry and differential scanning calorimetry (DSC) measurements showed that increasing concentrations of clay added to 20 wt.% polymer aqueous solutions caused a decrease of the temperature at which the viscosity starts increasing, while the temperature corresponding to the maximum endothermic effect due to the PNIPAM chain dehydration remained practically unchanged. The storage modulus, G′, increased with clay concentration for shorter PNIPAM chain triblock copolymers, while an opposite situation occurred in the case of the block copolymer with the longest PNIPAM block. For bentonite concentrations above 1 wt.%, G′ was larger than the viscous modulus, G″, at temperatures higher than the phase separation temperature, indicating a predominantly elastic character of the resulting composite hydrogels. These findings were explained through the presence of polymer–clay interactions occurring mainly through the PEG blocks.     

Spectroscopic Evaluation of Effects of Heat Treatments on the Structures and Emulsifying Properties of Caseins

The effects of heat treatment (heating temperature and pH) on the structures and emulsifying properties of caseins were systematically studied by spectroscopy. Heat treatment from 60 to 100 ℃ resulted in an increase in their fluorescence intensity, hydrodynamic diameter, turbidity and emulsifying activity index, but decreased the size polydispersity of caseins. In the pH range of 5.5 to 7.0, the fluorescence intensity, hydrodynamic diameter, turbidity and emulsifying properties decreased with increased heating pH, but the size polydispersity of caseins increased with increased pH. The relationship between the surface fluorescence intensity and emulsifying activity was also investigated, revealing a correlation coefficient of 0.90. These results suggested that heat treatment could be used to modify the structures and emulsifying properties of caseins by appropriately selecting heating conditions.     

4-(2-吡啶偶氮)-间苯二酚的共振散射光谱研究

研究了4-(2-吡啶偶氮)-间苯二酚(PAR)水溶液的共振散射光谱的形成机理与影响因素。在弱酸性溶液中,PAR可产生很强的共振光散射, 散射光谱形状与吸收光谱有关。溶液酸度影响PAR的电离平衡和存在状态,因而影响散射光谱。在pH 3.1～6.2之间,PAR为不带电荷的中性分子,可在疏水力的作用下结合形成分子聚合体,从而导致共振光散射增强。光偏振实验表明PAR的散射光为完全偏振光。在一定实验条件下,光散射强度与PAR浓度之间存在线性关系。     

Temperature and concentration dependence of SANS spectra of aqueous solutions of short-chain amphiphiles

The small-angle neutron scattering (SANS) of some aqueous solutions of short-chain amphiphiles (glycols, diglycols, diols) has been measured as a function of concentration and temperature. The analysis of the spectra in terms of the Teubner-Strey phenomelogical formula indicates that, on increasing the concentration of the amphiphile, the structure of all these systems evolves in a similar way, i.e. a transition from disordered structures toward correlated aggregates (microstructures). The transition is depressed by increasing the temperature.     

Molecular mobility of confined phases in model mesoporous (MCM-41) and microporous (AlPO4-5 zeolite) host materials

This paper discusses the self-assembly of block copolymers into vesicular morphology. After a brief state of art of the field, a system based on an amphiphilic poly(butadiene)-b-poly(-L-glutamic acid) (PB-b-PGA) diblock copolymer in aqueous solution is discussed in detail. The aggregation behavior of this block copolymer has been investigated by means of fluorescence spectroscopy, dynamic (DLS) and static (SLS) light scattering as well as transmission electron microscopy (TEM). The diblock copolymer was found to form well-defined vesicles in water. The size of these so-called polymersomes or peptosomes could be reversibly manipulated as a function of both pH and ion strength. Depending on the pH of the aqueous solution, the hydrodynamic radii of these vesicles were found to vary from 100 nm to 150 nm. By cross-linking the 1,2-vinyl double bonds present in the polybutadiene block, the ability to transform a transient supramolecular self-organized aggregate into a permanent “shape-persistent stimuli-responsive nanoparticle” has been demonstrated. Received 25 June 2002 and Received in final form 22 October 2002 Published online: 11 March 2003     

Small-angle neutron scattering from micellar solutions

Micellar solutions are the suspension of the colloidal aggregates of the sur-factant molecules in aqueous solutions. The structure (shape and size) and the interaction of these aggregates, referred to as micelles, depend on the molecular architecture of the surfactant molecule, presence of additives and the solution conditions such as temperature, concentration etc. This paper gives the usefulness of small-angle neutron scattering to the study of micellar solutions with some of our recent results.     

Effect of temperature on the intrinsic viscosity of poly(ethylene glycol) in water/dimethyl sulfoxide solutions

In this work, the intrinsic viscosities of poly(ethylene glycol) with molar mass of 20 kg mol^− 1 were measured in water/dimethyl sulfoxide solutions from (298.15 to 318.15) K. The expansion factors of the polymer chains were calculated from the intrinsic viscosity data. The expansion factor were decreased by increasing temperature; therefore the chain of PEG shrinks and the end-to-end distance become smaller by increasing temperature. Perhaps the interactions of segment-segment are favored toward segment-solvent by increasing temperature; therefore the hydrodynamic volumes of the polymer coils become smaller by increasing temperature. The thermodynamic parameters (entropy of dilution parameter, the heat of dilution parameter, theta temperature and polymer-solvent interaction parameter) were derived by the temperature dependence of the polymer chain expansion factor. The thermodynamic parameters indicate that the interactions of segment-segment were increased by increasing temperature.     

Effects of Poly(Propylene Oxide)–Poly(Ethylene Oxide)–Poly(Propylene Oxide) Triblock Copolymer on the Gelation of Poly(Ethylene Oxide)–Poly(Propylene Oxide)–Poly(Ethylene Oxide) Aqueous Solutions

Poly(ethylene oxide)-poly(propylene oxide)–poly(ethylene oxide) ((EO)_n–(PO)_m–(EO)_n) block copolymers, commercially available as Pluronics (BASF Corp.) and Poloxamers (ICI Corp.), have been widely applied in medicine, biochemistry, and other fields because of their ability to form reversible micelles and physical gels in aqueous solution. Generally, for PEO–PPO–PEO block copolymers with higher ethylene oxide concentration, the micellization and gelation in aqueous solution are easier. However, if we introduce the reverse block copolymer PPO–PEO–PPO into PEO–PPO–PEO aqueous solutions, the micellization and gelation of the system will be more complex. In this work, the reverse block copolymer PO₁₄–EO₂₄–PO₁₄ (17R4) was added to the Pluronics EO₂₀–PO₇₀–EO₂₀ (P123), EO₁₀₀–PO₆₅–EO₁₀₀ (F127), and EO₁₃₃–PO₅₀–EO₁₃₃ (F108) aqueous solutions with different molar ratios. The rheological properties of different mixtures were measured to study the additive effect on the gelation behavior. The sol–gel transition temperature of the P123, F127, and F108 solutions shifted to a higher temperature when 17R4 was added to the solutions. In addition, the existence of 17R4 greatly affected the stability of gels. These results help to better understand the gelation of Pluronic aqueous solutions.     

Nano-network with dual temperature and pH responsiveness based on copolymers of 2-hydroxyethyl methacrylate with 3,9-divinyl-2,4,8,10-tetraoxaspiro[5.5]-undecane

Abstract  

This study refers to the synthesis of a nano-network with dual temperature and pH responsiveness based on the 2-hydroxyethyl methacrylate (HEMA) copolymers with a comonomer with spiroacetal moiety and crosslinking capacity, namely 3,9-divinyl-2,4,8,10-tetraoxaspiro[5.5]-undecane (U). The copolymers were synthesized by radical emulsion polymerization, using 4,4′-azobis(cyanopentanoic acid) as initiator, in the presence of sodium lauryl sulfate as tensioactive agent and poly(vinyl alcohol) as protective colloid. Three copolymer variants were taken into study resulted from the different ratio between the comonomers (HEMA/U), which was about 98/2, 95/5, and 90/10, respectively. The copolymers were characterized by FTIR and thermal analysis. The copolymers sensitivity was evidenced by studying the evolution of the hydrodynamic radius and zeta potential of the polymeric particles as a function of pH. Thus, the particles size increases with the comonomer amount, from 193 nm in case of the homopolymer up to 253 nm for the copolymer with maximum content of the comonomer (10%). The increase of the particle hydrodynamic radius with the growth of temperature was also put into evidence.     

Step-addition Method for Enhancing the Yield of Gold Nanoparticles in Block Copolymer Solution

Triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) has been used to synthesize gold nanoparticles from hydrogen tetrachloroaureate (III) hydrate (HAuCl₄·3H₂O) salt in aqueous solution at room temperature. Measurements were performed using the triblock copolymer Pluronic P85 (EO₂₆PO₃₉EO₂₆) at a fixed concentration (1 wt%) mixed with varying HAuCl₄·3H₂O concentration in the range of 0.001 to 0.1 wt%. The surface plasmon resonance (SPR) band in UV-visible absorption spectra confirmed the formation of the gold nanoparticles. The maximum yield of the nanoparticles was found at 0.005 wt% of the salt solution. Small-angle neutron scattering (SANS) does not show any significant change in the scattering profile in these suspensions of the nanoparticles. A similar behavior was also observed in dynamic light scattering (DLS) experiments where autocorrelation function was found to be independent of the salt concentration. This can be understood since a high-block copolymer-to-gold ion ratio (r ～ 22) is required in the reduction reaction to produce gold particles. As a result, a very small fraction of the block copolymers were associated with the gold nanoparticles, and hence lead to a very low yield. Both SANS and DLS basically see the micelles of most of these block copolymers, which are not associated with nanoparticles. Based on this explanation, a step-addition method was used to enhance the yield of gold nanoparticles by manifold, where the gold salt is added in small steps to maintain higher value of r (>22), and therefore continuous formation of nanoparticles.     

Molecular Properties and Aggregation of Porphyrin-modified Polysiloxane in Solutions

Molecular properties and aggregation behavior of a polysiloxane with grafted side chain groups consisting of asymmetrical hydroxy-functionalized porphyrin were studied in dilute solutions. In order to understand the mechanism of aggregation of the polymeric porphyrin derivatives, several analyses of chloroform solutions were performed permitting comparison of the data obtained by means of different techniques. Molar mass and hydrodynamic size of the macromolecules were obtained using the methods of analytical ultracentrifugation, isothermal translational diffusion, and viscometry. Long distance interactions between macromolecules in dilute solutions were detected with static light scattering. With increasing the concentration of the solutions, the electronic and fluorescence spectra bands assigned to generation of H and J aggregates became apparent. The organization of aggregates, which seemed to be favored by chloroform, was visualized by atomic force microscopy images that displayed sponge-like morphology, small triangular particles, characteristic of H aggregates, and nano or micro-structured ring geometries obtained by the side-by-side J-process, coexisting together.     

Small-angle light scattering studies of dense AOT-water-decane microemulsions

Summary We have performed extensive studies of a three-component microemulsion system composed of AOT-water-decane (AOT=sodium-bis-ethylhexyl-sulfosuccinate is an ionic surfactant) using small-angle light scattering (SALS). The small-angle scattering intensities are measured in the angular interval 0.001–0.1 radians, corresponding to a Bragg wave number range of 0.14 μm⁻¹<Q<<1.4 μm⁻¹. The measurements were made by changing temperature and volume fraction ϕ of the dispersed phase (water + AOT) in the range 0.05<ϕ<0.75. All samples have a fixed water-to-AOT molar ratio,w=[water]/[AOT]=40.8, in order to keep the same average droplet size in the stable one-phase region. With the SALS technique, we have been able to observe all the phase boundaries of a very complex phase diagram with a percolation line and many structural organizations within it. We observe at the percolation transition threshold, a scaling behavior of the intensity data. This behavior is a consequence of a clustering among microemulsion droplets near the percolation threshold. In addition, we describe in detail a structural transition from a droplet microemulsion to a bicontinuous one as suggested by a recent small-angle neutron scattering experiment. The loci of this transition are located several degrees above the percolation temperatures and are coincident with the maxima previously observed in shear viscosity. From the data analysis, we show that both the percolation phenomenon and this novel structural transition are derived from a large-scale aggregation between microemulsion droplets.     

Self—assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small—angle x—ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PS_m-b-PVBA_n) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms flat disc objects with the ratio of radius ω=0.4. The average radius gyration R_g of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of CoCl_2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h)∝h^{-α} in different selective solutions, suggesting that the PS_m-b-PVBA_n coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (D_m) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (D_s) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing D_m and D_s from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding CoCl_2 in ethanol solvents.