Accelerated solvent extraction combined with dispersive liquid–liquid microextraction before gas chromatography with mass spectrometry for the sensitive determination of phenols in soil samples

A method combining accelerated solvent extraction with dispersive liquid–liquid microextraction was developed for the first time as a sample pretreatment for the rapid analysis of phenols (including phenol, m‐cresol, 2,4‐dichlorophenol, and 2,4,6‐trichlorophenol) in soil samples. In the accelerated solvent extraction procedure, water was used as an extraction solvent, and phenols were extracted from soil samples into water. The dispersive liquid–liquid microextraction technique was then performed on the obtained aqueous solution. Important accelerated solvent extraction and dispersive liquid–liquid microextraction parameters were investigated and optimized. Under optimized conditions, the new method provided wide linearity (6.1–3080 ng/g), low limits of detection (0.06–1.83 ng/g), and excellent reproducibility (<10%) for phenols. Four real soil samples were analyzed by the proposed method to assess its applicability. Experimental results showed that the soil samples were free of our target compounds, and average recoveries were in the range of 87.9–110%. These findings indicate that accelerated solvent extraction with dispersive liquid–liquid microextraction as a sample pretreatment procedure coupled with gas chromatography and mass spectrometry is an excellent method for the rapid analysis of trace levels of phenols in environmental soil samples.     

Optimization of Soxtec Extraction for the Determination of Polychlorinated Biphenyls (PCBs) in Mussel and Comparison with Soxhlet Extraction,Accelerated Solvent Extraction,and Microwave Assisted Extraction

An on-line Soxtec extraction and cleanup method is optimized for PCBs determination in mussel samples. Soxtec extraction conditions have been optimized using two factorial designs. Optimized extraction parameters were sample weight, anhydrous sodium sulfate weight, solvent volume, alumina weight, and boiling and rinsing times. The results suggest that all PCBs congeners extracted by Soxtec appeared statistically affected by solvent volume. Soxtec quantitative recoveries (8– ?115%) were achieved for all PCBs and method precision (RSD <12%) was satisfactory. The optimized method is compared with three different applied extraction methods, Soxhlet, accelerated solvent extraction, and microwave-assisted extraction. This latter presents the cleanup step on column or assisted by polypropylene membranes. The extraction effectiveness of the four different applied extraction methods for the determination of PCBs in mussel was similar.     

Solid-phase microextraction combined with gas chromatography/triple quadrupole tandem mass spectrometry for determination of nitrated polycyclic aromatic hydrocarbons in sediments

Nitro-polycyclic aromatic hydrocarbons have been detected in various environmental media. However, determination in sediment matrix is challenging due to the lack of a suitable method. In this study, a reliable method for determining 15 nitro-polycyclic aromatic hydrocarbons in sediments was developed based on accelerated solvent extraction and solid-phase microextraction coupled with gas chromatography–tandem mass spectrometry. The accelerated solvent extraction and solid-phase microextraction are sample pre-treatment techniques that have advantages, such as rapid operation and minimal sample volume. Initially, the solid-phase microextraction was optimized using five commercial fibers and from that 65 μm polydimethylsiloxane/divinylbenzene fiber was selected as the best fiber. Further, the accelerated solvent extraction conditions were optimized by Taguchi experimental design, such as extraction temperature (120℃), extraction solvent (dichloromethane), number of cycles (two), static extraction period (4 min), and rinse volume (90%). The method parameters, such as limits of quantitation, and intraday and interday accuracy and precision, were in the range of 0.067–1.57 ng/g, 75.2–115.2%, 69.9–115.4%, and 1.0–16.5%, respectively. Upon meeting all the quality criteria, the method was applied successfully to analyze real sediment samples. Therefore, our study creates a new prospect for the future application of direct immersion solid-phase microextraction in sediment analysis.     

茶叶中9种有机氯和拟除虫菊酯农药残留的前处理方法研究

建立了一种简便准确的前处理方法用于茶叶中5种有机氯农药和4种拟除虫菊酯类农药的测定。对索氏提取、超声提取、加速溶剂萃取和振荡提取4种提取方法的参数条件进行优化和对比,并对前处理的净化条件进行优化,建立了丙酮-正己烷(7∶3,体积比)溶液振荡提取串联Envi-Carb和LC-AliminaN小柱净化后,经丙酮-正己烷(1∶9)溶液洗脱,浓缩后用GC-MS法测定。茶叶样品中9种农药的加标回收率(n=6)为82%～108%,相对标准偏差为1.2%～4.5%,方法的检出限(以3倍信噪比计)为0.46～12.13ng/g。     

A multiresidue method for the analysis of pesticide residues in polished rice (Oryza sativa L.) using accelerated solvent extraction and gas chromatography and confirmation by mass spectrometry

An analytical procedure using accelerated solvent extraction and gas chromatography with an electron capture detector has been optimized to simultaneously determine the residue of two insecticides (diazinon and EPN) and one fungicide (isoprothiolane) in polished rice and was confirmed by GC-mass spectrometry. Several parameters, including temperature, pressure, solvent ratio, cell size and cell cycle, were thoroughly investigated to find the optimal extraction conditions. The average recoveries of the three pesticides were between 82.7 and 126.4% at spiking levels of 0.1 and 0.5 ppm. The relative standard deviations were less than 7% for all of the recovery tests. The optimum accelerated solvent extraction operating conditions were 100 degrees C, 1500 atm, acetone-n-hexane (20:80 v/v) as the extraction solvent, two cycles, and a cell size of 33 ml. The total extraction time was approximately 20 min. The optimized procedure has also been applied to the determination of diazinon, isoprothiolane and EPN in real rice samples. In conclusion, accelerated solvent extraction was used for the first time for the analysis of diazinon, isoprothiolane and EPN in polished rice and offers the possibility of a fast and simple process for obtaining a quantitative extraction of the studied pesticides.     

Determination of Preservatives in Water-Based Adhesives by Gas Chromatography–Mass Spectrometry

This study establishes an analytical method for the determination of eighteen preservatives in water-based adhesives. The method was based on liquid–liquid extraction by methyl tertiary-butyl ether and subsequent determination by gas chromatography–mass spectrometry. Experimental conditions (instrumental parameters, extraction solvent, extraction mode, dispersant volume, and extraction time) were optimized and validated. When the method was applied to water-based adhesives, the limits of detection and recovery were 2.29–17.59 milligrams per kilogram and 85.7 ? 93.9 percent, respectively, and the repeatability was below 5 percent for all analytes. None of the analytes were found in five cigarette adhesives.     

Simplified Determination of Organophosphorus Pesticides in Camellia Oil

A rapid, simple, and economical analytical approach has been developed and evaluated for the determination of six organophosphorus pesticides in camellia oil. This method is based on dispersive liquid?liquid microextraction (DLLME) following simple extraction. Oil was extracted with methanol by a high-speed blender and filtered with glass paper to remove fat. The filtrate was incorporated in the DLLME procedure. Acetonitrile was used as the dispersive solvent and chloroform as the extraction solvent. The residues were analyzed by gas chromatography–mass spectrometry. Under the optimized conditions, the recoveries were between 78.4 and 112.8% with relative standard deviations less than 12.3%. The limits of detection for the analytes were from 0.0003 to 0.0056?mg?·?kg^?1. The optimized method was used for the determination of organophosphorus pesticides in camellia oil.     

加速溶剂萃取技术在中药有效成分分析中的应用

以两种药材为研究实例,对加速溶剂萃取法（ASE）在中药材有效成分提取研究中的应用进行了简要介绍。采用正交试验法考察了提取丹参中丹酚酸B的提取条件（萃取温度、静态萃取时间、萃取溶剂以及料液比）,确定了较好的实验条件。比较了ASE、水蒸气蒸馏法、超声波提取法及索氏提取法对木香挥发油的提取效果,结果表明ASE对木香挥发油的提取效果最好。     

Influence of processing procedure on the quality of Radix Scrophulariae: A quantitative evaluation of the main compounds obtained by accelerated solvent extraction and high‐performance liquid chromatography

An improved high‐performance liquid chromatography with diode array detection combined with accelerated solvent extraction method was used to simultaneously determine six compounds in crude and processed Radix Scrophulariae samples. Accelerated solvent extraction parameters such as extraction solvent, temperature, number of cycles, and analysis procedure were systematically optimized. The results indicated that compared with crude Radix Scrophulariae samples, the processed samples had lower contents of harpagide and harpagoside but higher contents of catalpol, acteoside, angoroside C, and cinnamic acid. The established method was sufficiently rapid and reliable for the global quality evaluation of crude and processed herbal medicines.     

加速溶剂萃取法快速提取黄连中的生物碱

探讨了快速溶剂萃取法（ASE）提取黄连中生物碱的可行性,并比较了该方法与回流提取法和超声提取法的优越性。以黄连中盐酸小檗碱的提取率为指标,以高效液相色谱法（HPLC）为检测方法,用正交实验对快速溶剂萃取法从黄连中提取盐酸小檗碱的工作条件进行优化。最佳仪器参数：提取溶剂为80%乙醇＋0.5%HCl,提取温度为130℃,静态提取时间为10 min,提取次数为1次。快速溶剂萃取法可作为黄连中生物碱分析测定的前处理方法。     

Dispersive Liquid–Liquid Microextraction for the Preconcentration of Multiple Classes of Pesticides in Water

A simple, rapid, efficient, and environmentally friendly method was developed for the preconcentration of atrazine, simazine, diuron, bentazone, tebuconazole, and fipronil from water. Dispersive liquid–liquid microextraction was employed with determination by liquid chromatography–tandem mass spectrometry. The volumes of extraction and disperser solvents, the concentration of sodium chloride, and the pH were optimized by response surface methodology. The optimum conditions involved the use of 150 µL of 1:1 (v/v) monochlorobenzene:dichlorobenzene as the extraction solvent, 2 mL acetonitrile as the disperser solvent, and 10 mL of sample at pH 3.0. The accuracy was evaluated in terms of recovery values that were from 54 to 112%. The relative standard deviations ranged from 4 to 27%. The limits of quantification were between 0.005 and 0.05 µg L^?1. The optimized method had low matrix effects for the analytes and the results demonstrated application for the determination of pesticides in water.     

加速溶剂萃取/气相色谱-质谱测定海洋沉积物中的痕量多环芳烃

沉积物是多环芳烃(polycyclic aromatic hydrocarbons,PAHs)在环境中迁移归趋的一个重要的汇[1]。沉积物中多环芳烃的提取方法主要有索氏提取、超声波提取、微波萃取、加速溶剂提取及超临界流体萃取等。其中加速溶剂提取(accelerated solvent extraction,ASE)由于提取速度快,溶     

Optimized Ultrasonic Extraction for the Determination of Polyaromatic Hydrocarbons by Gas Chromatography–Mass Spectrometry

The presence of polycyclic aromatic hydrocarbons (PAHs) in soil is an issue of concern due to their harmful effects on human health. The goal of this study was to optimize ultrasonic extraction to establish an efficient, easy, and low-cost method for the determination of 16 priority PAHs in soil. The time of extraction and solvent systems were optimized with the analysis by gas chromatography–mass spectrometry. The method was validated, and the optimum results were obtained using 1:1 cyclohexane:acetone and 1:1 hexane:acetone solvent systems with 30- and 60-min sonication times.     

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.     

Evaluation and optimization of extraction and clean-up methods for the analysis of polycyclic aromatic hydrocarbons in peat samples

The analysis of PAH in peat samples is complicated by the high content of organic matter in peat which affects both extraction efficiency and analytical quality. Therefore, we evaluated the efficiencies of three extraction methods (accelerated solvent extraction (ASE), fluidized bed extraction, ultrasonic extraction) and several clean-up techniques in order to find the best set of methods. ASE proved to be the best extraction method. For clean-up, a procedure using aluminium oxide and silica gel showed the highest efficiency, whereas a method originally developed for soil samples failed to remove the peat matrix satisfactorily. With the optimized extraction and clean-up procedure, 170 samples from Canadian bogs were analysed for PAH. With overall recovery rates between 69?±?14 and 89?±?16% and an inaccuracy of ≤20%, the optimized method was a well suitable tool for the analysis of PAH in peat samples.     

Optimization and determination of polycyclic aromatic hydrocarbons in biochar‐based fertilizers

The agronomic benefit of biochar has attracted widespread attention to biochar‐based fertilizers. However, the inevitable presence of polycyclic aromatic hydrocarbons in biochar is a matter of concern because of the health and ecological risks of these compounds. The strong adsorption of polycyclic aromatic hydrocarbons to biochar complicates their analysis and extraction from biochar‐based fertilizers. In this study, we optimized and validated a method for determining the 16 priority polycyclic aromatic hydrocarbons in biochar‐based fertilizers. Results showed that accelerated solvent extraction exhibited high extraction efficiency. Based on a Box–Behnken design with a triplicate central point, accelerated solvent extraction was used under the following optimal operational conditions: extraction temperature of 78°C, extraction time of 17 min, and two static cycles. The optimized method was validated by assessing the linearity of analysis, limit of detection, limit of quantification, recovery, and application to real samples. The results showed that the 16 polycyclic aromatic hydrocarbons exhibited good linearity, with a correlation coefficient of 0.996. The limits of detection varied between 0.001 (phenanthrene) and 0.021 mg/g (benzo[ghi]perylene), and the limits of quantification varied between 0.004 (phenanthrene) and 0.069 mg/g (benzo[ghi]perylene). The relative recoveries of the 16 polycyclic aromatic hydrocarbons were 70.26–102.99%.     

Ionic‐liquid‐based,manual‐shaking‐ and ultrasound‐assisted,surfactant‐enhanced emulsification microextraction for the determination of three fungicide residues in juice samples

A novel manual‐shaking‐ and ultrasound‐assisted surfactant‐enhanced emulsification microextraction method was developed for the determination of three fungicides in juice samples. In this method, the ionic liquid, 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, instead of a volatile organic solvent was used as the extraction solvent. The surfactant, NP‐10, was used as an emulsifier to enhance the dispersion of the water‐immiscible ionic liquid into an aqueous phase, which accelerated the mass transfer of the analytes. Organic dispersive solvent typically required in common dispersive liquid–liquid microextraction methods was not necessary. In addition, manual shaking for 15 s before ultrasound to preliminarily mix the extraction solvent and the aqueous sample could greatly shorten the time for dispersing the ionic liquid into aqueous solution by ultrasound irradiation. Several experimental parameters affecting the extraction efficiency, including type and volume of extraction solvent, type and concentration of surfactant, extraction time, and pH, were optimized. Under the optimized conditions, good linearity with the correlation coefficients (γ) higher than 0.9986 and high sensitivity with the limit of detection ranging from 0.4 to 1.6 μg/L were obtained. The average recoveries ranged from 61.4 to 86.0% for spiked juice, with relative standard deviations from 1.8 to 9.7%. The proposed method was demonstrated to be a simple, fast, and efficient method for the analysis of the target fungicides in juice samples.     

快速溶剂萃取-气相色谱/质谱法分析血液中的甲卡西酮

建立血液中甲卡西酮快速溶剂萃取（ASE）-气相色谱/质谱（GC/ MS）分析的新方法. 通过优化 ASE 的萃取条件（溶剂、温度及时间）,对血液中的甲卡西酮进行有效提取,之后用 GC/ MS 进行定性、定量分析. 方法检出限为0. 02 mg / L,定量限为0. 1 mg / L. 血液中甲卡西酮在0. 5、1. 0 和2. 0 mg / L 3 个添加水平的平均回收率在96. 70% ~99. 27%之间,甲卡西酮在0. 1 ~ 50 mg / L 的浓度范围内线性良好. 方法快速、简便、高效且操作自动化,适用于血液中甲卡西酮的检验鉴定.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.     

酶解-离子色谱法测定烟草中的果胶

建立了一种测定烟草中果胶含量的酶解-离子色谱法,并对酶解条件进行了优化.即样品经快速溶剂萃取仪用80%乙醇除糖后,在47℃、pH4条件下用果胶酶酶解2 h,用离子色谱测定酶解液中的半乳糖醛酸含量.该法的线性相关系数为0.999 3,回收率98.3%～100.8%,RSD为3.43%.