Stability-Indicating Chromatographic Methods for Simultaneous Determination of Mosapride and Pantoprazole in Pharmaceutical Dosage Form and Plasma Samples

Simple, sensitive, selective, precise, and stability-indicating thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) methods for the determination of mosapride and pantoprazole in pharmaceutical tablets were developed and validated as per the International Conference on Harmonization guidelines. The TLC method employs aluminum TLC plates precoated with silica gel 60F₂₅₄ as the stationary phase and ethyl acetate/methanol/toluene (4:1:2, v/v/v) as the mobile phase to give compact spots for mosapride (R _f 0.73) and pantoprazole (R _f 0.45) separated from their degradation products; the chromatogram was scanned at 276 nm. The HPLC method utilizes a C18 column and a mobile phase consisting of acetonitrile/methanol/20 mM ammonium acetate (4:2:4, v/v/v) at a flow rate of 1.0 mL min⁻¹ for the separation of mosapride (t _R 11.4) and pantoprazole (t _R 4.4) from their degradation products. Quantitation was achieved with UV detection at 280 nm. The same HPLC method was successfully used in performing calibrations in lower concentration ranges for both drugs in human plasma using ezetimibe as internal standard. The methods were validated in terms of accuracy, precision, linearity, limits of detection, and limits of quantification. Mosapride and pantoprazole were exposed to acid hydrolysis and then analyzed by the proposed methods. As the methods could effectively separate the drugs from their degradation products, these techniques can be employed as stability-indicating methods that have been successively applied to pharmaceutical formulations without interference from the excipients. Moreover the HPLC method was successfully used in the determination of both drugs in spiked human plasma.

     

Stability-Indicating Chromatographic Methods for Simultaneous Determination of Mosapride and Pantoprazole in Pharmaceutical Dosage Form and Plasma Samples

Simple, sensitive, selective, precise, and stability-indicating thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) methods for the determination of mosapride and pantoprazole in pharmaceutical tablets were developed and validated as per the International Conference on Harmonization guidelines. The TLC method employs aluminum TLC plates precoated with silica gel 60F₂₅₄ as the stationary phase and ethyl acetate/methanol/toluene (4:1:2, v/v/v) as the mobile phase to give compact spots for mosapride (R _f 0.73) and pantoprazole (R _f 0.45) separated from their degradation products; the chromatogram was scanned at 276 nm. The HPLC method utilizes a C18 column and a mobile phase consisting of acetonitrile/methanol/20 mM ammonium acetate (4:2:4, v/v/v) at a flow rate of 1.0 mL min^?1 for the separation of mosapride (t _R 11.4) and pantoprazole (t _R 4.4) from their degradation products. Quantitation was achieved with UV detection at 280 nm. The same HPLC method was successfully used in performing calibrations in lower concentration ranges for both drugs in human plasma using ezetimibe as internal standard. The methods were validated in terms of accuracy, precision, linearity, limits of detection, and limits of quantification. Mosapride and pantoprazole were exposed to acid hydrolysis and then analyzed by the proposed methods. As the methods could effectively separate the drugs from their degradation products, these techniques can be employed as stability-indicating methods that have been successively applied to pharmaceutical formulations without interference from the excipients. Moreover the HPLC method was successfully used in the determination of both drugs in spiked human plasma.     

Quantitation of fluoroquinolones in honey using tandem mass spectrometry (LC-MS/MS): nested validation with two mass spectrometers

A number of drugs in the quinolone and fluoroquinolone families, approved for veterinary treatment of food animals by various countries, may be used to treat bee diseases and thereby contaminate honey. An LC-MS/MS method has been developed for the quantification of the quinolones: flumequine, nalidixic acid, oxolinic acid, and pipemidic acid; and the fluoroquinolones ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, norfloxacin, ofloxacin, orbifloxacin, marbofloxacin, sarafloxacin, and sparfloxacin. A method-matched calibration curve is used with several internal standards, i.e., ciprofloxacin-d8, Iomefloxacin, and cinoxacin, to correct for the various types of honey matrices: white, light, medium, and dark colors. Enoxacin is added as an external recovery standard. The LOD values range from 0.05 microg/kg (ofloxacin) to 0.4 microg/kg (flumequine). The compounds are verified by LC-MS/MS retention times and ion ratios. Method uncertainty was determined using two separate analytical systems. The method has successfully measured the presence of norfloxacin in several samples of honey imported into Canada.     

Determination of quinolone residues in infant and young children powdered milk combining solid-phase extraction and ultra-performance liquid chromatography-tandem mass spectrometry

The present work describes a method based on solid-phase extraction (SPE) and ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) for the simultaneous determination of three quinolones (pipemidic acid, oxolinic acid and flumequine) and twelve fluoroquinolones (marbofloxacin, fleroxacin, pefloxacin, levofloxacin, norfloxacin, ciprofloxacin, enrofloxacin, danofloxacin, lomefloxacin, difloxacin, sarafloxacin, and moxifloxacin) in different infant and young children powdered milks. After suitable deproteination of the reconstituted powdered samples, a SPE procedure was developed providing recovery values higher than 84% (RSDs lower than 13%) for all the analytes, with limits of detection between 0.04 and 0.52 μg/kg. UPLC-MS/MS analyses were carried out in less than 10 min. Sixteen infant and young children powdered milk samples of different origin, type and composition bought at Spanish markets were analyzed. Residues of the selected antibiotics were not detected in any of the analyzed samples.     

Multiresidue determination of eleven quinolones in milk by liquid chromatography with fluorescence detection

A liquid chromatographic method with fluorescence detection was developed for simultaneous determination of norfloxacin, ofloxacin, ciprofloxacin, pefloxacin, lomefloxacin, danofloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, and flumequine in milk The samples were extracted with 10% trichloroacetic acid/acetonitrile (9 + 1, v/v) and cleaned by Strata-X reversed-phase solid-phase extraction cartridges. The 11 quinolones were separated on a reversed-phase C18 column (Hypersil BDS-C18) with mobile phase gradient elution and detected with fluorescence by means of a wavelength program. The recoveries for milk fortified with the 11 quinolones at 3 levels were 69-88% with acceptable relative standard deviations of <9% (intraday) and <14% (interday). The limits of detection were 23 microg/L for enrofloxacin, and 1-9 microg/L for the other 10 quinolones.     

Ultra performance liquid chromatography tandem mass spectrometry performance evaluation for analysis of antibiotics in natural waters

An ultra performance liquid chromatography electrospray tandem mass spectrometry (UPLC/MS/MS) method was developed and validated for the determination of 17 antibiotics in natural waters in one single extraction and chromatographic procedure. Gradient separation conditions were optimised for 17 compounds belonging to five different antibiotic groups: quinolones (oxolinic acid, nalidixic acid, pipemidic acid, flumequine), fluoroquinolones (enoxacin, ciprofloxacin, norfloxacin, ofloxacin, enrofloxacin, sarafloxacin, danofloxacin, difloxacin, lomefloxacin), sulphonamides (sulphamethoxazole, sulphamethazine), nitro-imidazole (ornidazole) and diaminopyrimidine (trimethoprim). The separation of all compounds, obtained using a 1.7 μm particle size column (100 mm?×?2.1 mm), was achieved within 10 min time. Water samples were adjusted to pH 7 and extracted using Oasis hydrophilic–lipophilic balance (HLB) solid phase extraction cartridges. After elution with methanol and concentration, extracts were injected in a C18 column (Acquity UPLC BEH C18) and detected by tandem mass spectrometry. Average recovery from 100 ng L^?1 fortified samples was higher than 70% for most of the compounds, with relative standard deviations below 20%. Performances of the method (recoveries, detection limit, quantification limit and relative standard deviation) and matrix effects were studied, and results obtained showed that method was suitable for routine analysis of antibiotics in surface water. Samples analysis from Seine River (France) confirmed the interest of antibiotic contamination evaluation in that area.

A degradation study of cefepime hydrochloride in solutions under various stress conditions by TLC–densitometry

A rapid, accurate and sensitive thin‐layer chromatography (TLC) method with densitometric detection has been developed and validated for the determination of cefepime in pharmaceuticals. Chromatographic separation was achieved on a silica gel TLC F₂₅₄ plates with a mobile phase consisting of ethanol–2‐propanol–glacial acetic acid 99.5%–water (4:4:1:3, v/v). Densitometric detection was carried out at wavelength of 266 nm in reflectance/absorbance mode. The validation of the method was found to be satisfactory with high accuracy (from 99.24 to 101.37%) and precision (RSD from 0.06 to 0.36%). Additionally, the stability of cefepime in solution was investigated, including the effect of pH, temperature and incubation time. Favorable retention parameters (R_f, R_s, α) were obtained under the developed conditions, which guaranteed good separation of the studied components. The degradation process of cefepime hydrochloride was described by kinetic and thermodynamic parameters (k, t_0.1, t_0.5 and E_a). Moreover, the chemical properties of degradation products were characterized by the R_f values, absorption spectra, HPLC‐MS/MS and TLC‐densitometry analysis. As the method could effectively separate the active substance from its main degradation product (1‐methylpyrrolidine), it can be employed as a method to indicate the stability of this drug. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of Oxazepam in Pharmaceutical Formulation by HPTLC UV-Densitometric and UV-Derivative Spectrophotometry Methods

Abstract

Methods for determination of oxazepam in pharmaceutical formulation by derivative ultraviolet (UV) spectrophotometry as well as high-performance thin-layer chromatography (HPTLC) UV densitometry were described. For UV-derivative spectrophotometry, some derivatives and wavelengths may be recommended for routine quality control of the drug of interest. On the other hand, HPTLC provided good results, but only when the calibration curve was estimated using nonlinear regression analysis. The HPTLC method was developed with silica F₂₅₄ plates, a mobile phase of benzene/ethanol (5:1, v/v), and densitometric detection at 204 nm receiving R _f  = 0.47. Developed methods were validated and found to be sufficiently precise and reproducible for established conditions.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

TLC Determination of Betulinic Acid from Nymphodies macrospermum: A New Botanical Source for Tagara

The accepted botanical source of Tagara, an ayurvedic drug is Valeriana jatamansi Jones. In South India, a drug by the name of Granthika Tagara is used as Tagara in several therapeutic preparations. Currently, no analytical procedures appear to be available for quality control purposes. A sensitive, selective and precise thin-layer chromatographic method has been developed and validated for the analysis of betulinic acid in Nymphoides macrospermum. Separation and quantification was achieved by TLC using ternary mobile phase of hexane:ethyl acetate:acetic acid (7:3:0.03, v/v) (R _F 0.60) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent in the reflection/absorption mode at 540 nm. The calibration curve was linear in the concentration range of 100–600 ng spot^?1. The method was validated for precision, repeatability and accuracy. The proposed method was found to be simple, precise, specific, sensitive and accurate for the quantification of betulinic acid. This is the first TLC report for the identification and quantification of betulinic acid in N. macrospermum and may be useful for the routine quality control of Granthika Tagara.     

Separation of fifteen quinolones by high performance liquid chromatography: application to pharmaceuticals and ofloxacin determination in urine

A simple chromatographic method is described for assaying 15 quinolones and fluoroquinolones (pipemidic acid, marbofloxacin, enoxacin, ofloxacin, norfloxacin, ciprofloxacin, danofloxacin, lomefloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, nalidixic acid, flumequine and piromidic acid), in urine and pharmaceutical samples. The determination was achieved by LC using an RP C18 analytical column. A mobile phase composed of mixtures of methanol-ACN-10 mM citrate buffer at pH 3.5 and 10 mM citrate buffer at pH 4.5, delivered under an optimum gradient program, at a flow rate of 1.5 mL/min, allows to accomplish the chromatographic separation in 26 min. For detection, diode-array UV-Vis at 280 nm and fluorescence detection set at excitation wavelength/emission wavelength: 280/450, 280/ 495, 280/405 and 320/360 nm were used. Detection and quantification limits were between 0.3-18 and 0.8-61 ng/mL, respectively. The method was validated in terms of interday (n = 6) and intraday (n = 6) precision and accuracy. The procedure was successfully applied to the analysis of human and veterinary pharmaceuticals. Also, ofloxacin was determined in human urine samples belonging to a patient undergoing treatment with this active principle, among others.     

Multiresidue analysis of quinolones and fluoroquinolones in soil by ultrasonic-assisted extraction in small columns and HPLC-UV

In this work, a new and simple analytical methodology for the simultaneous analysis of several quinolones (cinoxacin, oxolinic acid, nalidixic acid and flumequine) and fluoroquinolones (norfloxacin, enrofloxacin, enoxacin, ciprofloxacin and danofloxacin) in soil samples is presented. The method is based on the extraction of these analytes by an ultrasonic-assisted extraction in small columns and their subsequent quantification by HPLC using UV detection. The observed strong sorption of quinolones and fluoroquinlones to soil together their different acid-base properties made necessary an exhaustive optimisation of the extraction step. The optimum extraction procedure, based on the formation of antibiotic-Mg(II) complexes, allowed to desorb and quantitatively extract both groups of antibiotics in a single step, which was not possible by using conventional organic solvents. The proposed method was validated and the limits of detection achieved were in the low μg g⁻¹ concentration range proving its suitability for the determination of quinolones and fluoroquinolones in soil samples at realistic environmental concentration level.     

RP-LC and HPTLC Methods for the Determination of Olmesartan Medoxomil and Hydrochlorothiazide in Combined Tablet Dosage Forms

Two new, rapid, precise, accurate and specific chromatographic methods were described for the simultaneous determination of olmesartan medoxomil and hydrochlorothiazide in combined tablet dosage forms. The first method was based on reversed phase liquid chromatography using an Eurosphere 100 RP C18 column (250 × 4.6 mm ID, 5 μm). The mobile phase was methanol–0.05% o-phosphoric acid (60:40 v/v) at a flow rate of 1.0 mL min^?1. Commercially available tablets and laboratory mixtures containing both drugs were assayed and detected using a UV detector at 270 nm. The second method involved silica gel 60 F₂₅₄ high performance thin layer chromatography and densitometric detection at 254 nm using acetonitrile–ethyl acetate–glacial acid (7:3:0.4 v/v/v) as the mobile phase. Calibration curves ranged between 200–600 and 125–375 ng spot^?1 for olmesartan and hydrochlorothiazide, respectively.     

Quantification of β-Sitosterol from Mucuna pruriens by TLC

Mucuna pruriens Linn. one of the popular and important medicinal plants of India is a constituent of more than 200 indigenous drug formulations. β-Sitosterol is one of the most prevalent phytosterols which is ubiquitous throughout the plant kingdom. A sensitive, selective and precise thin-layer chromatographic method has been developed and validated for the analysis of β-sitosterol in Mucuna pruriens roots. Separation and quantification was achieved by TLC using ternary mobile phase of toluene: chloroform; methanol (4:4:1 v/v) (R _F 0.55) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent in reflection/absorption mode at 527 nm. The calibration curve was linear in the concentration range of 100–600 ng spot⁻¹. The method was validated for precision, repeatability and accuracy. The proposed method was found to be simple, precise, specific, sensitive and accurate for the quantification of β-sitosterol.

     

Simple Multiresidue Determination of Fluoroquinolones in Bovine Milk by Liquid Chromatography with Fluorescence Detection

Abstract

A simple and sensitive method for the simultaneous determination of five fluoroquinolones (ciprofloxacin, enrofloxacin, danofloxacin, difloxacin, and sarafloxacin) in bovine milk was developed. Protein precipitation from milk samples was achieved by the addition of acetonitrile and o‐phosphoric acid. Acetonitrile was removed with dichloromethane, leaving the fluoroquinolones in the acid aqueous extract. The aqueous extract was analyzed by liquid chromatography with fluorescence detection (LC–FD). The mobile phase was composed of acetonitrile and 10 mM citrate buffer solution of pH 4.5, with an initial composition of acetonitrile‐water (12∶88, v/v) and using linear gradient elution. Norfloxacin was used as an internal standard. The limits of detection found ranged from 1 to 6 ng · mL^?1 and were below the maximum residue limits (MRLs) established by the European Union. The proposed method was applied to the determination of these compounds in different bovine milk samples. Method validation was carried out by a recovery assay.     

Simultaneous determination of levofloxacin hemihydrate and ambroxol hydrochloride in tablets by thin-layer chromatography combined with densitometry

This paper describes the application of thin-layer chromatography (TLC) combined with densitometry to simultaneous determination of levofloxacin hemihydrate (LEV) and ambroxol hydrochloride (AMB) in bulk and tablets. The separation was achieved on aluminum sheet of silica gel 60 F ₂₅₄ using chloroform: methanol: toluene: ammonia (10: 6: 3: 0.8 v/v/v/v) as mobile phase. Quantification was carried out densitometrically at 245 nm. This system was found to give compact spots for LEV (R _f value of 0.4) and AMB (R _f value of 0.7). The calibration curves for LEV and AMB was found to be linear between 9960–16600 ng/spot (r ² = 0.999) and 600–1000 ng/spot (r ² = 0.999), respectively. The mean percentage recoveries from tablets for LEV and AMB were 99.45% and 99.58%, respectively. The TLC-densitometry method has many advantages, such as simplicity, reasonable sensitivity, rapidity, and low cost, and it can be successfully used in routine analysis of both these drugs in tablet formulations.     

Simultaneous quantification of levofloxacin,pefloxacin, ciprofloxacin and moxifloxacin in microvolumes of human plasma using high‐performance liquid chromatography with ultraviolet detection

Levofloxacin, pefloxacin, ciprofloxacin and moxifloxacin are four fluoroquinolones used in the treatment of serious bacterial infections. The antibacterial activity of fluoroquinolones is concentration dependent. Therefore, therapeutic drug monitoring in daily clinical practice is warranted to ensure the therapy's efficacy and prevent bacterial resistance. The purpose of the present study was to develop a method using high‐pressure liquid chromatography with an ultraviolet detector for simultaneous quantification of these four fluoroquinolones in human plasma. A 50 μL aliquot of plasma was precipitated by 200 μL of methanol using gatifloxacin as internal standard. The chromatographic separation was performed on a Kinetex XB‐C₁₈ column using a mobile phase composed of a mixture of orthophosphoric acid 0.4% (v/v), acetonitrile and methanol at a flow rate of 1.2 mL/min. Dual UV wavelength mode was used, with levofloxacin and moxifloxacin monitored at 293 nm, and pefloxacin and ciprofloxacin monitored at 280 nm. The calibration was linear over the ranges of 0.125–25 mg/L for levofloxacin, 0.1–20mg/L for moxifloxacin and 0.05‐10 mg/L for both pefloxacin and ciprofloxacin. Inter‐ and intra‐day trueness and precision were <13% for all the compounds under study. The proposed method was simple, reliable, cost‐effective and suitable for therapeutic drug monitoring or pharmacokinetics studies.     

RP-LC and HPTLC Methods for the Determination of Olmesartan Medoxomil and Hydrochlorothiazide in Combined Tablet Dosage Forms

Two new, rapid, precise, accurate and specific chromatographic methods were described for the simultaneous determination of olmesartan medoxomil and hydrochlorothiazide in combined tablet dosage forms. The first method was based on reversed phase liquid chromatography using an Eurosphere 100 RP C18 column (250 × 4.6 mm ID, 5 μm). The mobile phase was methanol–0.05% o-phosphoric acid (60:40 v/v) at a flow rate of 1.0 mL min⁻¹. Commercially available tablets and laboratory mixtures containing both drugs were assayed and detected using a UV detector at 270 nm. The second method involved silica gel 60 F₂₅₄ high performance thin layer chromatography and densitometric detection at 254 nm using acetonitrile–ethyl acetate–glacial acid (7:3:0.4 v/v/v) as the mobile phase. Calibration curves ranged between 200–600 and 125–375 ng spot⁻¹ for olmesartan and hydrochlorothiazide, respectively.

     

Micropreparative fractionation of DNA fragments on metathesis-based monoliths: influence of stoichiometry on separation

New antibiotics were recently developed, among which are the (fluoro)quinolones. This paper presents an analytical method which allows the determination of 11 (fluoro)quinolones in swine kidneys: norfloxacin, ofloxacin, cinoxacin, oxolinic acid, nalidixic acid, flumequine, enrofloxacin, enoxacin, ciprofloxacin, danofloxacin and marbofloxacin. The procedure involves a rapid and efficient pre-treatment by solid-phase extraction (recoveries 83-98%), followed by the sensitive and selective determination of all compounds in a single run using LC-ESI-MS-MS. Multiple reaction monitoring (MRM) was used for selective detection of each (fluoro)quinolone. Quinine was selected as internal standard. The accuracy of the method, expressed as recovery, was between 89 and 109%; the repeatability had a maximum RSD lower than 15%. The limits of detection (LOD) were much lower than the respective Maximum Residue Limits (MRL)/4.     

Veterinary antimicrobials and antiparasitics in fee-fishing ponds: analytical method and occurrence*

ABSTRACT

The aim of this work was to develop and validate a method using online solid-phase extraction and ultra-high-performance liquid chromatography coupled to tandem mass spectrometry to determine residues of 22 veterinary drugs including sulfonamides, amphenicols, fluoroquinolones, benzimidazoles, trimethoprim (TMP) and oxytetracycline (OTC) in water from fee-fishing ponds. The optimal analytical conditions were as follows: XBridge C8 SPE column, Acquity UPLC CSH C18 analytical column, sample loading with water:methanol (98:2, v/v), mobile phase of water with 0.1% acetic acid:methanol (with gradient elution) and eluent flow rate of 0.3 mL min^?1. Quantification was performed in selected reaction monitoring mode and sulfadimethoxine-d₆, ciprofloxacin-d₈, florfenicol-d₃ and albendazole-d₃ were used as internal standards. Water samples collected from 11 fee-fishing ponds showed the presence of residues of FF (0.42–0.74 µg L^?1), albendazole (0.05–0.31 µg L^?1) and thiabendazole (0.45 µg L^?1). Thiamphenicol and TMP were detected at concentrations lower than the limits of quantification of the method (0.1 and 0.001 µg L^?1, respectively).