A Novel Method for the Selective Determination of Silver （I） Ion

Semiconductor quantum dots (QDs) present considerable advantages over bulk single-crystal semiconductors1. As a result of quantum confinement, they have unique optical and electronic properties such as broad excitation spectra, narrow, symmetric and tunable emission spectra2. In addition, QDs exhibit high photobleaching threshold and excellent photostability. They are starting to attract considerable attention as novel fluorescence probes in recent years3-6. Recently, Chen and Rosenzwei…     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Flow Injection Chemiluminescence Determination of Hemin Using the Rhodamine B–H2O2–NaOH System

A flow injection chemiluminescence method has been developed and applied to the determination of hemin in tablets and animal blood. The proposed method is based on the luminescent properties of the Rhodamine B–H₂O₂–NaOH system and the addition of sodium dodecyl sulfonate (SDS) as emission-sensitizer. Hemin was determined over the concentration range of 8.6×10^–10–8.6×10^–7M with a detection limit of 8.6×10^–11M (3). The relative standard deviation (RSD) for seven independent detections of 1.72×10^–8M hemin was 3.0%. The proposed method was successfully applied to the analysis of hemin in pharmaceutical preparations and animal blood with a recovery of 96–108%. A possible CL mechanism of the present system was discussed, and free radicals were suggested to be involved in this reaction.     

A New Chemiluminescence Amplification Reaction for the Determination of HRP and Labelled HRP

A new chemiluminescence amplification reaction has been developed, which is on the coupling of the oxidation of Eosin by hydrogen peroxide under the catalysis of HRP at pH 3. 5 to the chemiluminescent reaction of luminol and hydrogen peroxide catalyzed by HRP at pH 10 to measure the activity of HRP and labelled-HRP. The detection limit of HRP is 10-10 g/mL. The lowest dilution ratio of HBsAb-HRP is 1 : 1. 8×102 and 1 : 106 for the direct method and coupled method respectively.     

Rapid Flow-Injection Method for the Determination of Colistin by Sensitized Chemiluminescence Using the Acidic Permanganate–Sulfite System

Abstract

A simple, rapid, and sensitive chemiluminescence method for the determination of colistin (Polymyxin E), a cyclic polypeptide with antibiotic effect produced by certain strains of Bacillus polymyxa, has been developed by combining a flow-injection technique and the bacteria's sensitizing effect on the chemiluminescence reaction between sulfite and acidic permanganate. The optimum conditions for chemiluminescence emission were established. The chemiluminescence was proportional to the log of concentration of colistin over the range 4–100 µg mL^?1 (3.5–87 µM). The detection limit was 1.2 µg mL^?1 (1.0 µM) of colistin. The method has been satisfactorily used for the determination of colistin in pharmaceuticals.     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

“Signal-on” Electrogenerated Chemiluminescence Biosensing Method for the Determination of Matrix Metalloproteinase 2

A simple, selective and sensitive “signal-on” electrogenerated chemiluminescence (ECL) biosensing method was developed for matrix metalloproteinase 2 (MMP-2). Ru(bpy)₃²⁺, gold nanoparticles (AuNPs) and Nafion were modified onto glassy carbon electrode (GCE) to form Ru(bpy)₃²⁺/AuNPs/Nafion/GCE as sensitive ECL platform and then ferrocene (Fc) labeled peptide was assembled onto the modified electrode to form ECL biosensing platform. The ECL intensity increased when the ECL biosensing electrode reacted with MMP-2 because of MMP-2-induced cleavage of Fc labeled peptide. The ECL method was applied to determine MMP-2 with detection limit of 0.3 ng/mL and one-step recognition, which is promising for point-of-care test of protease.     

Kinetic Potentiometric Determination of some Thiols with Iodide Ion‐Sensitive Electrode

Abstract

This paper describes a kinetic potentiometric method for the determination of thiols (RSH): l‐cysteine (cys), N‐acetyl‐l‐cysteine (NAC), l‐glutathione (glu), and d‐penicillamine (pen). The proposed method is based on the reaction of formation the sparingly soluble salts, RSAg, between RSH and Ag⁺ ions. During this reaction potential‐time curves were recorded by using an electrochemical cell with commercial iodide selective electrode. The rectilinear calibration graphs are obtained in the RSH concentration range from 1.0×10^?5 to 1.0×10^?3 M. The applicability of the proposed method was demonstrated by determination of chosen compounds in pharmaceutical dosage forms.     

Indirect Flow Injection Chemiluminescence Method for the Determination of Tetracyclines Using Cu(Ⅱ) as a Probe Ion

Tetracycline antibiotics (TCs) are active against a wide range of gram-positive and gram-negative bacteria, being extensively used in human and veterinary medicine to treat and prevent bacterial infections1. Among the TCs, TC, OTC and CTC are commercially available and permitted for human administration. However, the degradation products occurring in storage conditions might induce potential adverse effects. Thus, many studies have focused on the development of a rapid, sensitive and reli…     

A Novel Kinetic Method for the Determination of Cobalt(Ⅱ) in Vitamin Bl2

Cobalt(Ⅱ) in NaOH(a.q.) can catalyze the decolorizing reaction resulting from the oxidation of dibromohydoxylphenylfluorone(DBH-PF) by H₂O₂(a.q.). A new catalytic spectrophotometry for determining trace Cobalt(Ⅱ) was obtained. The method has been used to determine trace Cobalt(Ⅱ) in Vitamin B₁₂ samples. The sensitivity of this method is higher than the references, and the selectivity of the method is better than the references too.     

Indirect Flow Injection Chemiluminescence Method for the Determination of Tetracycfines Using Cu（]I） as a Probe Ion

This paper reported an indirect flow injection chemiluminescence （FI-CL） method for the determination of the drugs tetracycline （TC）, chlortetracycline （CTC） and oxytetracycline（OTC） using Cu（ Ⅱ ） as a probe ion. The CL reaction was induced on-line and after injection of the sample the negative peaks appeared as a result of complexation. The method was applied to the determination of TCs in pharmaceuticals and human urine with recoveries in the range95-105%.     

A Novel Ionic Liquid／water Biphasic System for the Preparation of Oximes

A variety of carbonyl compounds can be converted into oximes efficiently and conveniently in a novel ionic liquid/water bi-phasic system in the presence of sodium bicarbonate at ambient temperature. The ionic liquid 1-butyl-3-methyl imidazolium hexafluorophosphate [bmim]PF6 is immiscible with water or diethyl ether and can be easily recycled for reuse without noticeable droping in activity after separation of the products. The protocol is rapid, the yields are excellent, the method is simple and the ionic liquid can be reused.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

A Novel and Convenient Assay for the Determination of OH Produced by Fenton Reaction

Oxygenradicalsaswellas0theroxygen-derivedspeciesincludinglipidperoxides,havebeensuggestCdaspotentiallyimportantcausativeagents0fagingandvarioushumandi,...,i-3suchascancer,multiplescler0sis,Parkinson'sdisease,autoinununediseases,ischemia,anemia,seniledementiaandasbestosis.Am0ngthevari0usradicals,thehydroxylradical(OH)ispresumedtoplayacentralroleduetoitSstr0ngactivity'.TheimPortanceofremovingexcessiveactiveoxygenspeciesfromlivingorganismsisbecondngincreasinglyrec0gnized,t0getherwithagrowingint…     

Chemiluminescence Determination of Benzoic Acid Using A Solid-Phase Verdigris Reactor

Benzoicacidisacommonadditiveusedwidelyasfoodpreservativeandplasticizer.Itcouldpromoteseverereactiontoallergicpopulationevenatlowconcentrationlevel1.Routinemethodsfortheassayofbenzoicacidincludeschromatographic2-6,spectrophotometry7,8,capillaryelectrophoresis9-13andelectrochemicaltitration14.Stokes15etal.monitoredairbornebenzoicacidbasedonsurface-enhancedRamanscatteringtechniques.Thereisalsoreportonamicrobialsensorusingpseudomonasforbenzoicacidandtheirderivativesinaqua16.Interestofusinglumines…     

The Use of Boron‐Doped Diamond Electrodes for the Amperometric Determination of Flavonoids in a Flow Injection System

Abstract

This paper describes the use of boron‐doped diamond electrode for the amperometric detection and quantification of flavonoids in tea samples using a flow injection system. Flavonoids are phenol derivates widely distributed in fruits, nuts, seeds, flowers, vegetable peels, and beverages; they are known to exhibit high antioxidative activities. After optimization, the experiments were performed at a fixed potential of 0.42 V vs Ag/AgCl with a flow rate of 2.5 ml min^?1 in a Britton‐Robinson buffer at pH 5.0. The results revealed that the peak current increases linearly with rutin concentration in the interval 0.1–2.5×10^?4 mol L^?1 and the detection limit was 7.7×10^?6 mol L^?1. The method was used for the determination of rutin in three different green tea (Camellia sinensis) infusions by the direct addition of 150 µL of untreated sample. The repeatability of current responses for injections of 150 µL rutin was evaluated to be 2.1% (n=20) and the analytical frequency was 100 Hz h^?1. The results were compared with the results obtained by high‐performance liquid chromatrography‐diode ray detector.     

A Novel Derivatization Method Coupled with GC–MS for the Simultaneous Determination of Chloropropanols

A sensitive and rapid derivatization method for the simultaneous determination of chloropropanols [1,3-dichloropropan-2-ol (1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD)] has been developed. The three chloropropanols were silylated with 1-trimethylsilylimidazole and then determined by GC–MS. n-Undecane was used as the internal standard. The limits of detection (LOD) were 0.20, 0.10, 0.14 μg kg^?1 for 1,3-DCP, 2,3-DCP and 3-MCPD, respectively. The three compounds behaved >0.999 of linearity and satisfactory precision with the relative standard deviation (RSD) <10%. The excellent validation data suggested that this method was more effective than heptafluorobutyrylimidazole derivatization, and 1-trimethylsilylimidazole was considered as a promising silylating reagent to be widely applied to measurements of chloropropanols in real samples.     

Flow－injection Chemiluminescence Sensor for the Determination of Free Chlorine in Tap Water

Ｆｌｏｗ－ｉｎｊｅｃｔｉｏｎＣｈｅｍｉｌｕｍｉｎｅｓｃｅｎｃｅＳｅｎｓｏｒｆｏｒｔｈｅＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＦｒｅｅＣｈｌｏｒｉｎｅｉｎＴａｐＷａｔｅｒＳｈｕＮａＬＩＵ；ＷｅｉＱＩＮ；ＺｈｕＪｕｎＺＨＡＮＧ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉ...     

A Novel and Efficient Catalytic System for Aerobic Oxidative Coupling of 2-Naphthol Derivatives

The paper reported a novel and efficient aerobic oxidative coupling reaction of 2-naphthol derivatives catalyzed by CuCu (Ⅰ or Ⅱ)N-alkylimidazole complexes in excellent yields. The crystal structure of CuCu(Ⅱ)N-methylimidazole complex to be determined by X-Ray.     

Conductivity Studies of Glasses in the System WO3−P2O5

Russian Journal of Applied Chemistry - Quenching method was used to obtain glasses in the system xWO3-(100-x)P2O5 (x = 70, 75, 80, 82 mol %). The electrical conductivity of the compositions was...