Electrochemical Behavior of Hydrogen Peroxide at a Glassy Carbon Electrode Modified with Nickel Hydroxide–Decorated Multiwalled Carbon Nanotubes

Abstract

The multiwalled carbon nanotube–nickel hydroxide composite film used to modify glassy carbon electrode was prepared and confirmed by transmission electron microscopy and cyclic voltammetry. The process and mechanism of film formation were discussed in detail. The electrode modified with the composite film exhibited good catalytic activity toward electrochemical oxidation of hydrogen peroxide in 0.1 mol/L sodium hydroxide solution. Various factors affecting the electrocatalytic activity of nickel hydroxide film were investigated. The anodic peak current increased with the increased concentration of hydrogen peroxide. The linear range for the determination of hydrogen peroxide was from 1.5 × 10^?6 mol/L to 2.5 × 10^?3 mol/L with the detection limit 6.1 × 10^?7 mol/L (S/N = 3). And the proposed method was applied to the determination of hydrogen peroxide in disinfector with higher sensitivity and lower detection limit.     

The Electrochemical Behavior and the Determination of Bavistin on Glassy Carbon Electrode

Bavistin(MBC)'isatypeofveryimportantbactericides.Theanalyticalmethodsofthispesticideincludingchromatography',polarography'havebeenreported,butthereisnoreportaboutthedetendnationwithvoltanuntryonglassycarbonelectrode.Inthispaper,westudiedthevoltanunetric(CV)propertiesandthedifferentialpulsestrippingvoltanunetry(DPSV)detendnationofMBConglassycarbonelectrode.TheinstrUmentusedinthisexperimentwastheBAS-l(X)AElectroanalyser.Aglassycarbonelectrodewasusedastheworkingelectrode,aconunercialAgjA…     

Direct Electrochemical Oxidation of NADPH at a Low Potential on the Carbon Nanotube Modified Glassy Carbon Electrode

Introduction Because of its novel structural and electronic proper-ties, high chemical stability, and extremely high me-chanical strength and modulus,1 carbon nanotube (CNT), which has become a major subject of many experimen-tal and theoretical investigations, has a wide potential application from structural materials to nanoelectronic components2-12 since its initial discovery by Iijima13 in 1991 and the subsequent report about the synthesis of large quantities of CNT by Ebbesen and cowork…     

The Study of Electrochemical Behavior of Dopamine at Nano—gold Modified Carbon Fiber Electrode

In the field of detection of neurotransmitters carbon fiber ultramicroelectrode has attracted extensive attention due to its specific features such as particular steady state diffusion profiles and very small IR drop values as well as the ability to work in living organism1. Carbon fiber microelectrodes have been used successfully to detect dopamine in vivo2,3. The electrochemical behavior of dopamine at nano-gold modified carbon fiber electrode was studied in this paper. The electrochemica…     

Voltammetric Determination of Hydroquinone using β‐Cyclodextrin/Poly(N‐Acetylaniline)/Carbon Nanotube Composite Modified Glassy Carbon Electrode

Abstract

An electrochemical sensor for hydroquinone (HQ) using β‐cyclodextrin/poly(N‐acetylaniline)/carbon nanotube composite (β‐CD/PAA/MWNTs) modified glassy carbon electrode has been successfully developed. Based on the synergistic effect of MWNTs and conducting PAA polymer and the accumulation effect of β‐CD, the analytical response of the β‐CD/PAA/MWNTs film to the electrochemical behavior of HQ was better than that of a β‐CD/PAA film, a PAA/MWNTs film, a PAA film, or a bare glassy carbon (GC) electrode. Under the conditions chosen, the anodic currents increased linearly with HQ concentration from 1×10^?6 to 5×10^?3 mol l^?1 and the detection limit was 8×10^?7 mol l^?1. This electrochemical sensor showed excellent reproducibility, stability and recovery for the determination of HQ.     

Electrochemical Oxidation at a Glassy Carbon Electrode of the Anti‐Arrhythmia Drug Disopyramide

Abstract

A voltammetric study of the oxidation of disopyramide has been carried out using a glassy carbon electrode. The electrochemical oxidation of disopyramide was investigated by cyclic, differential pulse, and square wave voltammetry. The oxidation of disopyramide is an irreversible, diffusion‐controlled process. The diffusion coefficient of disopyramide was calculated in pH 7.0 phosphate buffer to be D _disopyramide=3.8×10^?6 cm² s^?1. The oxidation of disopyramide is also pH dependent and for electrolytes with pH between 4 and 7 occurs with the transfer of one electron and one proton. In alkaline electrolytes, two consecutive charge transfer reactions are observed: both oxidation reactions involve the transfer of two electrons but only the first also involves the transfer of two protons. Two procedures for the analytical determination of disopyramide in pH 7.0 phosphate buffer were developed and compared and a detection limit LOD=1.27 µM was obtained.     

The Determination of Salbutamol Sulfat Based on a Flow‐Injection Coupling Irreversible Biamperometry at Poly(aminosulfonic acid)‐Modified Glassy Carbon Electrode

Abstract

The present work describes the development of a simple and efficient method for electrochemical analysis determination of SBS using polymer film coated modified electrode. A glassy carbon electrode (GCE) is successfully modified with electropolymerized film of aminosulfonic acid (ASA) in pH 6.8 phosphate buffer solution (PBS). Cyclic voltammetry (CV) were used to study the electrochemical properties of the polymer film and the appropriate condition for electropolymerization process. The voltammetric behavior of SBS at the PASA GC CMEs has been investigated, the results suggest that the PASA GC CMEs have good effect of electrocatalytic oxidation action to SBS, also propose the mechanism toward SBS. The flow‐injection irreversible biamperometry analysis method was studied under the applied potential difference of 0 V to determinate SBS. In 0.1 mol l^?1 (pH 6.80) phosphate buffer solution, a sensitive and irreversible oxidation peak was obtained at the PASA GC CMEs. Under the optimum conditions, SBS can be determined from the range 2.0×10^?6 to 1.0×10^?3 mol · 1^?1 with the sampling frequency of 100 samples per hour. The detection limit for SBS is 6.5×10^?7 mol l^?1 and the RSD for 20 replicate determinations of 4.0×10^?5 mol l^?1 SBS is 1.85%. The method is simple, with high selective rapid and sensitive. The method is applied to the determination of SBS in the drug with satisfactory results. Moreover, the physiologically common interferents (i.e., sucrose, lactose, citric acid, and citrate) negligibly affected the response of SBS. The PASA GC CMEs film‐coated electrode exhibited a stable and sensitive response to salbutamol sulfat in the presence of electrocatalysis oxidation.     

Sensitive Determination of Clomipramine at Poly‐ABSA/Pt Nano‐Clusters Modified Glassy Carbon Electrode

Abstract

Clomipramine, an important tricylic antidepressant drug with low redox activity, was effectively electrocatalyzed on poly‐aminobenzene sulfonic acid/Pt nano‐clusters modified glassy carbon electrode (i.e., poly‐ABSA/Pt/GCE) and generated a sensitive anodic peak at about 0.80 V in pH 8.1 PBS. ABSA was electropolymerized on the surface of GCE modified with Pt nano‐clusters. Pt nanoparticles provide a 3 D and conductive structure for the polymer immobilization. The resulting sensor exhibited a considerable enhancement in voltammetric response characteristics: extending the linear range and lowering the detection limit. The anodic peak current of clomipramine was linear with its concentration over two concentration intervals, viz., 1.0×10^?7～4.0×10^?6 M and 4.0×10^?6～4.0×10^?5 M, with the detection limit of 1.0×10^?9 M (S/N=3). This method was successfully applied to the determination of clomipramine in drug tablets and proved to be reliable compared with UV.     

Preparation, Electrochemical Behavior and Electrocatalytic Activity of a Copper Hexacyanoferrate Modified Ceramic Carbon Electrode

A copper hexacyanoferrate modified ceramic carbon electrode （CuHCF/CCE） had been prepared by two-step sol-gel technique and characterized using electrochemical methods. The resulting modified electrode showed a pair of well-defined surface waves in the potential range of 0.40 to 1.0 V with the formal potential of 0.682 V （vs. SCE） in 0.050 mol·dm^-3 HOAc-NaOAc buffer containing 0.30 mol·dm^-3 KCl. The charge transfer coefficient （a） and charge transfer rate constant （ks） for the modified electrode were calculated. The electrocatalytic activity of this modified electrode to hydrazine was also investigated, and chronoamperometry was exploited to conveniently determine the diffusion coefficient （D） of hydrazine in solution and the catalytic rate constant （kcat）. Finally, hydrazine was determined with amperometry using the resulting modified electrode. The calibration plot for hydrazine determination was linear in 3.0 × 10^-6--7.5 × 10^-4 mol·dm^-3 with the detection limit of 8.0 × 10^-7 molodm^-3. This modified electrode had some advantages over the modified film electrodes constructed by the conventional methods, such as renewable surface, good long-term stability, excellent catalytic activity and short response time to hydrazine.     

Simultaneous Determination of Nitrophenol Isomers at Multi-Walled Carbon Nanotube-β-Cyclodextrin-Poly (Diphenylamine) Composite Modified Glassy Carbon Electrode

Russian Journal of Electrochemistry - Nitrophenol (NP) isomers are toxic for human, animals and plants. Therefore determination of them in environment is very urgent and important. In this paper,...     

The Electrochemical Behavior of p-Aminophenol at a ω-Mercaptopropionic Acid Self-Assembled Gold Electrode

A -mercaptopropionic acid (MPA) self-assembled monolayer modified electrode (MPA/SAM/Au) on a gold electrode has been fabricated. The characterization of the MPA/SAM/Au was investigated using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. impedance. The electrochemical behaviors of p-aminophenol (p-AP) were studied at the MPA/SAM/Au by cyclic voltammetry and semi-derivative voltammetry (SDV) in BR buffer solution. The modified electrode shows excellent electrocatalytic activity for the redox of p-AP and accelerates the electron transfer rate. The diffusion coefficient (D) is 4.55×10^–6cm²s^–1. The oxidative peak current increases linearly with the concentration of p-AP in the range of 4.0×10^–88×10^–6molL^–1 and 1.0×10^–52×10^–4molL^–1 by square wave voltammetry response, respectively. The detection limit (three times the signal blank/slope) is up to 1.2×10^–8molL^–1. The modified electrode is able to eliminate the interference of p-benzenediol, o-benzenediol and o-AP at a 40-, 90- or 70-fold concentration of p-AP, and it has been satisfactorily used for the determination of the real sample.     

The Electrochemical Behavior of Acetaminophen on Multi‐Walled Carbon Nanotubes Modified Electrode and Its Analytical Application

Abstract

A multi‐walled carbon nanotubes modified glassy carbon electrode (MWNTs/GCE) was fabricated, and the electrochemical behaviors of acetaminophen (ACOP) were investigated on the MWNTs/GCE. The results showed that MWNTs exhibited excellent electrocatalytic effects on the reaction of ACOP by accelerating the electron transfer rate. Cyclic voltammetry (CV) was used to explore the electrochemical redox mechanism of ACOP on the MWNTs/GCE and differential pulse voltammetry (DPV) was taken to determine ACOP in samples, respectively. The results showed that the oxidative peak currents were linear with the concentration of ACOP in the range of 4.0×10^?7–1.5×10^?4 mol l^?1 with the detection limit 1.2×10^?7 mol l^?1. The MWNTs/GCE showed satisfactory stability, selectivity, and it can be used to quantify ACOP in effervescent dosage real samples.     

Direct Electrochemistry of Catalase on Single Wall Carbon Nanotubes Modified Glassy Carbon Electrode

Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at -0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0).The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.     

Electrochemical Oxidation of Hydrazines at a 4-Pyridyl Hydroquinone Modified Electrode

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＯｘｉｄａｔｉｏｎｏｆＨｙｄｒａｚｉｎｅｓａｔａ４－ＰｙｒｉｄｙｌＨｙｄｒｏｑｕｉｎｏｎｅＭｏｄｉｆｉｅｄＥｌｅｃｔｒｏｄｅＮＩＵＬｉ,ＹＯＵＴｉａｎ－ｙａｎ,ＪｏｈｎＹ．Ｇｕｉ,ＤＯＮＧＳｈａｏ－ｊｕｎ,ＷＡＮＧＥｒ－...     

Voltammetric Determination of L‐Dopa Using a Carbon Nanotubes‐Nafion Modified Glassy Carbon Electrode

Abstract

A method for determination of L‐dopa by the adsorption stripping voltammetry (ASV) using a multiwalled carbon nanotubes (MWNTs)–Nafion modified glassy carbon electrode (GMGCE) was proposed. This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed and the anodic peak potential is ca. 0.374V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of L‐dopa in samples. There is a good linear relationship between the peak current (i_p) and L‐dopa concentration in the range of 3.5×10^?7～1.5×10^?5 mol/L, with the limit of detection 5.0×10^?8 mol/L.     

Nafion‐Modified Glassy Carbon Electrode for Trace Determination of Indium

Abstract

A new method for determination of trace indium is proposed by the adsorption stripping voltammetry (ASV) using a Nafion‐modified glassy carbon electrode (NMGCE). This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed, and the anodic peak potential is ca. ?0.548 V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of indium in water samples. There is a good linear relationship between the peak current (i_p) and indium(III) concentration in the range of 1.0×10^?9–1.0×10^?7 mol/l, and the limit of detection is 7.5×10^?10 mol/l.     

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Nanoporous materials have been widely applied to biosensor investigation. Recently, Guo et al. have investigated the mesoporous materials modified carbon paste electrode for rapid cTnI (cardiac troponin I) detection with enhanced sensitivity1-3. However, …     

Electrochemical Determination of Uric Acid Using a Multiwalled Carbon Nanotube Platinum–Nickel Alloy Glassy Carbon Electrode

Platinum–nickel nanoparticles were synthesized by a reduction procedure. The Pt–Ni/C composite was characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and electrochemical analysis. The measurements show that the Pt–Ni/multiwalled carbon nanotubes provided higher electrocatalytic activity for the oxidation of uric acid than Pt–Ni/carbon black. The sensor prepared from the characterized material provided a long linear dynamic range from 0.1 to 240.4?µM with a detection limit of 0.03?µM and a sensitivity of 41.21?µA?mM^?1?cm^?2. The reported modified electrode also provided excellent selectivity, good stability, and satisfactory reproducibility for the determination of uric acid.     

Voltammetric Determination of Dopamine in Human Serum and Urine at a Glassy Carbon Electrode Modified by Cysteic Acid Based on Electrochemical Oxidation of L ‐cysteine

Abstract

The voltammetric behavior of dopamine was studied at a glassy carbon electrode modified by cysteic acid, based on electrochemical oxidation of L ‐cysteine. The modified electrode showed strong electrocatalytic activity towards dopamine and good selectivity. In a phosphate buffer solution (pH 7.4), the anodic peak current obtain from the differential pulse voltammetry of dopamine was linearly dependent on its concentration in the range of 5×10^?9 to 4.0×10^?6mol · L^?1, with a detection limit of 2×10^?9mol · L^?1. The low‐cost modified electrode had been applied to the determination of dopamine in human serum and urine samples with satisfactory results.     

Electrochemical Behavior and Application of Pirarubicin at Gold Nanoparticles–Modified Indium Tin Oxide Electrode

Abstract

A new type of gold nanoparticles–attached indium tin oxide electrode was made. By SEM and EDS, the as‐prepared gold nanoparticles–modified ITO electrode was characterized. This modified electrode has been used for the determination of pirarubicin (THP) in urine by cyclic voltammetry. Compared to a bare ITO electrode, the modified electrode exhibited a marked enhancement in the current response. Liner calibration curves are obtained in the range 5×10^?9mol/L～1.5×10^?6 mol/L with a detection limit of 1×10^?9 mol/L. The percentage of the recoveries ranged from 99.3% to 106.3%. The practical analytic utility of the method is illustrated by quantitative determination of THP in urine.