Characterization of micellar mobile phases for reversed-phase chromatography

Cationic, anionic, and nonionic surfactants are characterized for their usefulness as micellar mobile phases in reversed-phase chromatography. Conditions found previously to provide optimum chromatographic efficiency for sodium dodecyl sulfate also provide high efficiency for the cationic and nonionic surfactants studied. The use of 3% n-propanol in the micellar mobile phase and column temperatures of 40°C appear to offer a broadly applicable solution to the low efficiency previously reported for micellar mobile phases. A chromatographic method for the determination of critical micelle concentrations is reported; it compares favorably with literature methods. Micellar mobile phases are shown to mimic ion-pairing mobile phases, allowing the separation of neutral solutes as well as solutes charged oppositely to the surfactant and offer a more rugged method of analysis than hydro-organic ion-pairing methods.     

Surfactant fouling of nanofiltration membranes: measurements and mechanisms.

Fouling of nanofiltration membranes is studied during filtration of aqueous surfactant solutions under different conditions. To this purpose, four typical nanofiltration membranes (Desal51HL, NF270, NTR7450 and NFPES10) and three typical surfactants (nonionic neodol, anionic SDBS and cationic cetrimide) are selected. Fouling is studied as a function of the surfactant concentration, with and without addition of an electrolyte (NaCl), at different pH and when filtering a mixture of surfactants. Adsorption experiments and hydrophobicity measurements (to study the orientation of the surfactants on the membrane surface) are also performed under the different conditions. The least membrane fouling is found for the anionic surfactant SDBS, while for the cationic surfactant cetrimide very low relative fluxes are observed. Neodol shows an intermediate degree of fouling. Both hydrophobic and electrostatic interactions (in the case of ionic surfactants) between the membrane surface and the surfactant explain the degree of adsorption and hence fouling, as membrane fouling is correlated with the amount of adsorbed surfactant. The difference between cetrimide and SDBS becomes especially visible when changing the pH: increasing the pH leads not only to an opposite orientation of the adsorbed surfactants, but also to an opposite trend in adsorbed amount and membrane fouling. This study permits selection of an optimal nanofiltration membrane to recycle wastewater containing surfactants in the carwash industry. The optimal choice would be a hydrophilic membrane with a low molecular weight cut-off and a small negative surface charge at neutral pH. Cationic surfactants in the wastewater should also be avoided as much as possible.     

BEHAVIOR OF ANIONIC SURFACTANT MICELLES IN THE PRESENCE OF Al3+ AND Ca2+

The estimation of the C-potential of ionic surfactant micelles may be useful for the study of adsorption of solutes onto the micellar surface, which causes a reduction of the net electrostatic charge. This work presents results on the variation of ζ-potential of alkylsulfate and fatty carboxylate micelles with the bulk concentrations of Al³⁺ and Ca²⁺ cations. Combined with results from the literature about the effect of micellar surfactant concentration on reducing surfactant precipitation in the presence of polyvalent cations, these allow to conclude that micelles of anionic surfactants will have a higher chance of electroneutralization of their surface charge by adsorbing cations if the end functional group of the surfactant is smaller.     

Separation and Determination of Phenolic Antioxidants by HPLC with Surfactant/n‐Propanol Mobile Phases

The influence of cationic and anionic surfactants and short‐chain alcohols in the mobile phase on the retention of five antioxidants has been studied. The solutes chosen were butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), and propyl, octyl, and dodecyl gallates (PG, OG, DG).The surfactants were hexadecyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS), and n‐propanol (PrOH) was the selected alcohol. A simple isocratic reversed‐phase method for the antioxidant determination is proposed. Separation of five primary antioxidants takes 18 min with the mobile phase SDS 0.10 M/H₃PO₄ 0.01 M/PrOH 30%. Variation of the percentage of alcohol in the mobile phase permits optimization of the retention times of the antioxidants. Detection limits in the pg range were obtained for the all solutes. The method was used to determine the antioxidants in olive oil at three different levels, giving mean recoveries close to 100% for all the solutes (BHA 102%, PG 99%, OG 99%, DG 99%) except BHT (84%).     

Effect of the Mobile Phase on Solute Retention in Liquid-Solid Chromatography

Abstract

Utilizing retention data estimated by HPTLC on silica and activity coefficients in the non-aqueous mobile phase determined on the basis of saturation solubility of solutes, the effect of the mobile phase on retention of a set of structurally different solutes was studied. A quadratic relationship between the logarithm of retention factors or activity coefficients and the volume fraction of ethyl acetate in heptane - ethyl acetate solution was observed, suggesting a common retention machanism in liquid chromatography. The retention and/or relative retention of a solute was affected by both the mobile and the stationary phase. The magnitude of these effects depended merely on the molecular structure of a solute.     

Effect of Surfactants on the Formation,Morphology, and Surface Property of Synthesized SiO2 Nanoparticles

Abstract

This study investigated the effect of cationic, anionic (saturated and unsaturated), and nonionic surfactants on the formation, morphology, and surface properties of silica nanoparticles synthesized by the ammonium‐catalyzed hydrolysis of tetraethoxysilane in alcoholic media. Results indicate that at a relatively low surfactant concentration (1 × 10^?3–1 × 10^?6 M), cationic surfactants significantly affected the growth of silica particles as measured by dynamic light scattering and transmission electron microscopic analyses. In contrast, the anionic and nonionic surfactants showed relatively minor effects in the low concentration range. The magnitude of negative zeta potential was reduced for silica colloids that were synthesized in the presence of cationic surfactant because of charge neutralization. The presence of anionic surfactants only slightly increased the negative zeta potential while the nonionic surfactant showed no obvious effects. At high surfactant concentrations (>1 × 10^?3 M), cationic and anionic surfactants both induced colloid aggregation, while the nonionic surfactant showed no effect on particle size. Raman spectroscopic analysis suggests that molecules of cationic surfactants adsorb on silica surfaces via head groups, aided by favorable electrostatic attraction, while molecules of anionic and nonionic surfactants adsorb via their hydrophobic tails.     

Amphitropic liquid crystals. Two lamellar phases in a surfactant containing thermotropic and lyotropic mesogenic groups

Abstract

We have studied the lyotropic liquid-crystalline behaviour of cationic surfactants containing a potentially thermotropic moiety, a terminal cyanobiphenyloxy group. Both mono-alkyl and mid-chain substituted dialkyl surfactants have been examined using optical microscopy and NMR spectroscopy. Incorporation of the cyanobiphenyloxy group destabilizes the hexagonal and bicontinuous cubic phases, with only an extensive lamellar region being observed. For the dialkyl surfactant there is a range of compositions where two lamellar phases co-exist, one water-rich and the second surfactant-rich.     

Effect of water hardness on the interaction of cationic dye with anionic surfactants

ABSTRACT

The effect of water hardness causing ions on the critical micelle concentration (cmc) of surfactants was studied using conductivity measurement. Spectrophotometric and conductometric studies of dye and surfactant interaction under the influence of water hardness causing ions were also investigated. It was found that with increasing hardness in water, cmc of the surfactants tends to decrease. The change in the colour of the solution was observed as the degree of hardness increases. Hardness of water can consider as a major contributor of fading or change in colour during washing and cleaning of dyed material. Dye in a surfactant solution containing varying amount of hardness causing ions undergoes a blue shift in the visible region and red shift in ultraviolet region. The comparison between sodium dodecylsulphate (SDS) and saponin natural surfactant showed that turbidity was observed only in the aqueous solution of SDS in the presence of very hard water.     

Charge-Transfer Chromatographic Study on the Interaction of Nonhomologous Series of Nonionic Surfactants with Heptakis(2,6-di-O-methyl)-β-cyclodextrin

Abstract

The interaction of 38 nonionic surfactants containing various hydrophobic moieties with dimethyl-β-cyclodextrin (DIMEB) was studied by charge transfer chromatography. DIMED modified the retention behaviour of each surfactant, however, the strength of interaction varied considerably. Both the lipophilicity and specific hydrophobic surface area of surfactants significantly influenced the strength of interaction. The presence of ester bond and double bond in the hydrophobic moiety of surfactants has impact on the complex formation.     

Sensitivity Enhancement of the Fluorometric Determination of Aluminum by the Use of Surfactant

Abstract

The effects of surfactants on fluorescence analysis were studied. The addition of surfactants to a metal complex solution causes a remarkable enhancement of fluorescence. By means of such phenomenon the sensitivity of the fluorometric determination of aluminum was increased about six-fold over conventional methods. From the stability of the chelate complex in the presence of surfactant and the degree of enhancement of fluorescence, the nonionic surfactant was judged to be the most useful of the types of surfactants: cationic, anionic and nonionic. An ultramicro amount of aluminum, 5 × 10^?10 g Al/ml, could be determined by the proposed method.     

Separating Ability of Some Polar Mobile Phases in Reverse Phase High Performance Liquid Chromatography

Abstract

Homologous series of n-alkanes, n-alcohols, ethers, esters, amides and ketones were studied as solutes. Methanol, acetonitrile, ethanol, dioxane, 2-propanol and tetrahydrofuran were mobile phases. Spherisorb ODS columns with light and heavy octadecyl coatings were used. Methanol and acetonitrile were found to be the most selective solvents for reverse phase separation. The polar amides, alcohols, and ketones behaved differently from nonpolar solutes in acetonitrile mobile phases. Results were interpreted with the solvophobic theory.     

Separation and determination of Ni(II), Co(II) and Cu(II) by RP-HPLC with hexadecyltrimethylammonium bromide/n-propanol mobile phases

Summary The effect of the presence of a cationic surfactant, hexadecyltrimethylammonium bromide (CTAB), and a short chain alcohol,n-propanol, in the mobile phase on the chromatographic retention of Co(II), Ni(II) and Cu(II) diethylammonium diethyldithiocarbamate complexes, has been studied. A simple isocratic reversephase method for the determination of the metals is proposed, using a mobile phase of composition CTAB 0.03 M/n-propanol 45 %v/v. Detection limits at pg levels were obtained for all solutes. The method was applied to the determination of the complexes in tap water samples at three different concentrations, with recoveries close to 100%. In order to evaluate the interaction between the metal complexes and the aggregates formed, the values of solute binding constants are calculated.     

Reactive Surfactant in the Emulsion Copolymerization of Methyl Methacrylate and Octyl Acrylate

The emulsion copolymerization of methyl methacrylate and octyl acrylate was studied using a reactive surfactant ammonium sulfate allyloxy nonylphenoxy poly(ethyleneoxy) (10) ether (DNS‐86), and a conventional surfactant sodium dodecylbenzene sulfonate (DBS) with a similar structure as a comparison sample. A series of latex samples have been prepared with two kinds of surfactants, and their properties have been characterized and compared. ¹H‐NMR proves that the reactive surfactant has been incorporated into the resulting copolymers. The atomic force microscopy (AFM) proves that the reactive surfactant DNS‐86 migrate to the surface of the latex film to a much less degree than the conventional surfactant DBS. Transmission electron microscopy (TEM) demonstrates that there are some differences in the particle morphologies. The stability and water‐resistance of the latex films prepared by reactive surfactant DNS‐86 are better than those prepared by the conventional surfactant DBS.     

Ceramic membrane ultrafiltration of anionic and nonionic surfactant solutions

The ultrafiltration of two types of surfactants, sodium dodecyl sulfate (SDS, anionic) and Tergitol NP-9 (nonylphenol polyethylene glycol ether, nonionic), using a 20 nm ZrO₂ tubular membrane was investigated. The influence of crossflow velocity, temperature, pressure, and surfactant concentration on the permeate flux, close to and above the critical micelle concentration (CMC), is reported. Permeate flux and surfactant retention were measured in order to evaluate concentration polarization and fouling phenomena, and also the variation of these parameters due to surfactant/membrane interactions. High surfactant retentions (60–70%) were achieved depending on the feed concentration.     

Retention mechanisms in micellar liquid chromatography

Micellar liquid chromatography (MLC) is a reversed-phase liquid chromatographic (RPLC) mode with mobile phases containing a surfactant (ionic or non-ionic) above its critical micellar concentration (CMC). In these conditions, the stationary phase is modified with an approximately constant amount of surfactant monomers, and the solubilising capability of the mobile phase is altered by the presence of micelles, giving rise to diverse interactions (hydrophobic, ionic and steric) with major implications in retention and selectivity. From its beginnings in 1980, the technique has evolved up to becoming a real alternative in some instances (and a complement in others) to classical RPLC with hydro-organic mixtures, owing to its peculiar features and unique advantages. This review is aimed to describe the retention mechanisms (i.e. solute interactions with both stationary and mobile phases) in an MLC system, revealed in diverse reports where the retention behaviour of solutes of different nature (ionic or neutral exhibiting a wide range of polarities) has been studied in a variety of conditions (with ionic and non-ionic surfactants, added salt and organic solvent, and varying pH). The theory is supported by several mechanistic models that describe satisfactorily the retention behaviour, and allow the measurement of the strength of solute-stationary phase and solute-micelle interactions. Suppression of silanol activity, steric effects in the packing pores, anti-binding behaviour, retention of ionisable compounds, compensating effect on polarity differences among solutes, and the contribution of the solvation parameter model to elucidate the interactions in MLC, are commented.     

Solute Dissociation Effects in Reversed Phase Liquid Chromatography with Mixed Eluents

Abstract

Basing on the displacement model of liquid chromatography new equations are proposed for the capacity ratio of ionogenic solutes in the mixed mobile phase. Effects of different parameters on the capacity ratio of the monotropic acids are systematically studied for RPLC process.     

Rheology and microstructure studies of SDS/CTAB/H2O system

Phase behavior of mixed sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB) aqueous solution was studied. The rheological properties and microstructure were investigated using a rheostat and freeze-fracture technique and are shown to be closely related to the phase behavior. Experimental investigations reveal two symmetrical aqueous two-phase systems (ATPS) in the ternary phase diagram of SDS/CTAB/H₂O system. In the surfactant rich phase of ATPS or in the adjacent stoichiometric state of ATPS, the system has high viscosity because of its long range ordered structure. Lamellar phase was found in the high viscosity samples in which the cationic and anionic surfactant are in 1: 3 or 3: 1 stoichiometry. In addition, the viscosity has a tendency to increase when salt was added to the solution. The viscosity increase is due to the salt can screen the repulsion between different charged headgroups and thus reduces the effective size of surfactants and facilitates the spherical or rod likes micelles to be transformed to worm-like micelles which can form hexagonal or liquid crystal phases. Large-size salt ions like sodium sulfate (especially organic salt ions) have more significant effect on the surfactant solution viscosity. The text was submitted by the authors in English.     

Amphiphilic pyrimidinophane,a new dimeric surfactant: Synthesis,aggregation, and catalytic activity

Abstract Tensiometry, conductometry, dynamic light scattering, and potentiometry are used to study the aggregation of a new amphiphilic alkylated pyrimidinophane (APP) in aqueous solutions in the presence of polyethylen-imine. The new geminal surfactant is shown to possess high micellization ability (CMC = 0.00001 M) due to the presence of an additional alkyl radical in the pyrimidine fragment. APP aggregates are characterized by a low degree of counterion binding (lower than 50%). Spectrophotometry is employed to investigate the catalytic activities of individual surfactant solutions and solutions of APP—polyethylenimine binary mixtures with respect to the hydrolysis of phosphonic acid esters. The effect of APP on phosphonate hydrolysis is typical of cationic surfactants. The higher acceleration is observed for the hydrolysis of a more hydrophobic phophonate.     

Supramolecular systems of amphiphilic derivatives of calix[4]resorcinarenes and surfactants in chloroform

Aggregation of amphiphilic calix[4]resorcinarenes (CRA) modified by carboxymethyl (1), 2-hydroxyethyl (2), methylamino acetal (3), and aminomethyl (4) fragments and their interaction with some synthetic (5, 6) and natural (7, 8) surfactants in the low-polarity solvent (chloroform) were studied by permittivity measurements and FT-IR spectroscopy. Compounds 1–4 and surfactants form aggregates at critical micelle concentrations (CMC) of 2.0·10⁻⁵–7.5·10⁻⁵ and 1.7·10⁻⁵–2.0·10⁻³ mol L⁻¹, respectively. The CMC values of CRA—surfactant mixed aggregates depend on the surfactant structure and the structure and concentration of CRA. Analysis of the IR spectra of solutions of a series of amphiphilic CRA (2–4, 9, 10) and their mixtures with the cationic surfactant N-cetyl-N,N-dimethyl-N-(2-hydroxyethyl)ammonium bromide (5) showed that an increase in the concentration of the solutions in individual and mixed systems is accompanied by a decrease in the molar integral intensities and intensities in the maxima of the absorption bands of the O—H and C—H bonds down to the CMC point, after which these values change slightly. The discovered effect, which is differently pronounced for all systems studied, indicates that both the polar “head” groups and nonpolar fragments of CRA and surfactant are involved in the formation of supramolecules of the reverse micelle type in all cases. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 459–466, March, 2007.     

Separation of basic, acidic and neutral compounds by capillary electrochromatography using uncharged monolithic capillary columns modified with anionic and cationic surfactants

A mode of capillary electrochromatography (CEC), based on the dynamical adsorption of surfactants on the uncharged monolithic stationary phases has been developed. The monolithic stationary phase, obtained by the in situ polymerization of butyl methacrylate with ethylene dimethacrylate, was dynamically modified with an ionic surfactant such as the long-chain quaternary ammonium salt of cetyltrimethylammonium bromide (CTAB) and long-chain sodium sulfate of sodium dodecyl sulfate (SDS). The ionic surfactant was adsorbed on the surface of polymeric monolith by hydrophobic interaction, and the ionic groups used to generate the electroosmotic flow (EOF). The electroosmotic mobility through these capillary columns increased with increasing the content of ionic surfactants in the mobile phase. In this way, the synthesis of the monolithic stationary phase with binary monomers can be controlled more easily than that with ternary monomers, one of which should be an ionic monomer to generate EOF. Furthermore, it is more convenient to change the direction and magnitude of EOF by changing the concentration of cationic or anionic surfactants in this system. An efficiency of monolithic capillary columns with more than 140000 plates per meter for neutral compounds has been obtained, and the relative standard deviations observed for to and retention factors of neutral solutes were about 0.22% and less than 0.56% for ten consecutive runs, respectively. Effects of mobile phase composition on the EOF of the column and the retention values of the neutral solutes were investigated. Simultaneous separation of basic, neutral and acidic compounds has been achieved.