Enantioseparation of racemic paroxol on an amylose‐based chiral stationary phase by supercritical fluid chromatography

The separation of racemic paroxol, a key precursor of trans‐(?)‐paroxetine, on Chiralpak AD‐H, an amylose‐based chiral stationary phase, by supercritical fluid chromatography was studied. Pulse experiments were investigated using supercritical carbon dioxide modified with methanol (MeOH), ethanol and 2‐propanol at 35°C and 15 MPa. Retention and separation factors were determined under analytical conditions for different mobile phase compositions. Among the modifiers used, MeOH was shown to be the best additive, and 5% v/v of MeOH was the preferable concentration at which selectivity of 1.14 and resolution of 3.0 was obtained. In order to evaluate the potential with respect to preparative separations, the adsorption isotherms of individual enantiomers of paroxol were estimated using the elution by characteristic point method. Isotherm parameters were determined from the overloaded elution profiles that were collected at pressure ranging from 15 to 24 MPa. The isotherms obtained were further validated by comparing experimentally recorded elution profiles with the predictions based on the equilibrium‐dispersive model. The results are important to the process design and optimization of preparative supercritical fluid chromatography application.     

Separation of enantiomers of ibuprofen on chiral stationary phases by packed column supercritical fluid chromatography.

A packed column supercritical fluid chromatography (SFC) method for the separation of ibuprofen enantiomers on a chiral stationary phase and CO2 with modifier as mobile phase has been developed at an analytical scale. Among 11 different stationary phases the Kromasil CHI-TBB phase showed by far the best separation properties. The influence of different modifiers, injection solvents, temperature, and pressure, and density of the fluid, respectively, on the separation behavior has been studied. It was found that the separation behavior strongly depends on the type of modifier and the modifier content. Temperature and pressure are of less influence.     

Enantioselective separation and dissipation of pydiflumetofen enantiomers in grape and soil by supercritical fluid chromatography–tandem mass spectrometry

Pydiflumetofen is registered in many countries and is widely used in crop production in the racemate form. However, the environmental behavior of the enantiomers has not been studied. An effective and sensitive chiral analytical method was first established for analyzing the pydiflumetofen enantiomers by supercritical fluid chromatography with tandem triple quadrupole mass spectrometry. The enantiomers could be separated and detected using the Chiralcel OD‐3 column in less than 3 min. The separation conditions were as follows: mobile phase, CO₂/methanol (80:20); flow rate, 1.0 mL/min; column temperature, 30°C, auto back‐pressure regulator pressure, 2000 psi with modified quick, easy, cheap, effective, rugged, and safe sample treatment method. The average recoveries of analytes from both matrices at three spiking levels were in the range of 84.1–103.0%. The limit of quantitation for each enantiomer was 0.005 mg/kg with a baseline resolution of approximately 1.64. The method was applied to monitor the enantioselective dissipation of pydiflumetofen in grape and soil. In grapes, (?)‐pydiflumetofen was degraded more rapidly than (+)‐pydiflumetofen. In soil, (+)‐pydiflumetofen was preferentially degraded. The data provided useful references for the risk assessment and rational use of pydiflumetofen in agriculture.     

Chiral ligand-exchange high-performance liquid chromatography with copper (II)-L-phenylalanine complexes for separation of 3,4-dimethoxy-α-methylphenylalanine racemes

L-3, 4-dimethoxy-α-methylphenylalanine (L-DMMD) is an important intermediate for the synthesis of 3-hydroxy-α-methyl-L-tyrosine (L-methyldopa). This paper describes an efficient, accurate, and low-priced method of high-performance liquid chromatography (HPLC) using chiral mobile phase and conventional C₁₈ column to separate L-DMMD from its enantiomers. The effects of ligands, copper salts, organic modifiers, pHs of mobile phase, and temperatures on the retention factors (k') and selectivity (α) were evaluated to achieve optimal separation performance. Then, thermal analysis of the optimal separation conditions was investigated as well. It was confirmed that the optimal mobile phase was composed of 20 % (v/v) methanol, 8 mM L-phenylalanine (L-Phe), and 4 mM cupric sulfate in water of pH 3.2, and the column temperature was set at 20 °C. Baseline separation of two enantiomers could be obtained through the conventional C₁₈ column with a resolution (R) of 3.18 in less than 18 min. Thermodynamic data (??H and ??S) obtained by Van't Hoff plots revealed the chiral separation was an enthalpy-controlled process. To the best of our knowledge, this is the first report regarding the enantioseparation of DMMD by chiral ligand-exchange HPLC.     

Supercritical fluid solid chromatography using novel porous glassy carbon. Evaluation of retention mechanisms

The use of a porous glassy carbon (PGC) material as a packed-column SFC stationary phase has been previously demonstrated [1]. The material is further characterized in terms of its retention characteristics. The effects of variations in mobile phase composition, pressure, and temperature conditions are evaluated. Variation of temperature and pressure yielded expected results, specifically, decreased solute capacity factors with increased mobile phase density. The choice of supercritical fluid mobile phase allows the most notable control of solute retention; this was evaluated by adding low percentages of organic modifiers of varying molecular weights to the supercritical carbon dioxide mobile phase. PGC-SFC provides reversed phase characteristics similar to those found for PGC-HPLC. Porous glassy carbon has selectivity characteristics previously unavailable in supercritical fluid chromatography. Use of porous glassy carbon in supercritical fluid chromatography may provide distinct advantages in difficult analytical separations, allowing separations of molecules with only slight structural differences.     

Chiral Separation of Tenatoprazole and Several Related Benzimidazoles by Normal Phase LC Using Amylose-Based Stationary Phase

Simple and efficient analytical LC methods using amylose-based stationary phase Chiralpak AS-H were developed for direct enantioseparation of tenatoprazole and several related benzimidazoles. The chromatographic experiments were performed in the normal phase mode with n-hexane–ethanol–triethylamine (TEA) as mobile phase. The effects of the mobile phase additive, concentration of organic modifiers and column temperature were studied for the enantioseparation. The thermodynamic parameters were also calculated from the van’t Hoff plots. It was found that the enantioseparations were all enthalpy driven. The enantiomers of all compounds were resolved (R _s  > 3.3) within 14 min using n-hexane–ethanol–TEA (20:80:0.1%, v/v/v) as mobile phase with a flow rate of 0.4 mL min^?1 at 40 °C. The optimized method was validated for determination of the enantiomers of tenatoprazole in terms of linearity, precision and accuracy according to ICH guidelines and applied to the assay of tenantoprazole bulk drugs. The proposed method was shown to be accurate and suitable for the quantitative determination of tenatoprazole enantiomers.     

Cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase for the enantioseparation of drugs in supercritical fluid chromatography: comparison with HPLC

A cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase was studied as a tool for the enantioselective separation of 21 selected analytes with different pharmaceutical and physicochemical properties. The enantioseparations were performed using supercritical fluid chromatography. The effect of the mobile phase composition was studied. Four different additives (diethylamine, triethylamine, isopropylamine, and trifluoroacetic acid) and isopropylamine combined with trifluoroacetic acid were tested and their influence on enantioseparation was compared. The influence of two different mobile phase co‐solvents (methanol and propan‐2‐ol) combined with all the additives was also evaluated. The best mobile phase compositions for the separation of the majority of enantiomers were CO₂/methanol/isopropylamine 80:20:0.1 v/v/v or CO₂/propan‐2‐ol/isopropylamine/trifluoroacetic acid 80:20:0.05:0.05 v/v/v/v. The best results were obtained from the group of basic β‐blockers. A high‐performance liquid chromatography separation system composed of the same stationary phase and mobile phase of similar properties prepared as a mixture of hexane/propan‐2‐ol/additive 80:20:0.1 v/v/v was considered for comparison. Supercritical fluid chromatography was found to yield better results, i.e. better enantioresolution for shorter analysis times than high‐performance liquid chromatography. However, examples of enantiomers better resolved under the optimized conditions in high‐performance liquid chromatography were also found.     

Chromatographic separation of 3,4-difluorophenylacetic acid and its positional isomers using five different techniques

The separation of five positional isomers from 3,4-difluorophenylacetic acid was investigated using normal- and reversed-phase high-performance liquid chromatography, capillary zone electrophoresis, gas chromatography and supercritical fluid chromatography. Operating parameters of each technique, such as temperature, type of stationary phase, mobile phase pH, ionic strength, organic modifiers and additives were varied in order to elucidate the separation mechanisms. Based on the advantages and disadvantages of each methodology, a simple and practical RPLC method was selected. The method was validated in terms of linearity, limit of detection, accuracy, recovery, ruggedness and precision.     

Efficient separation of curcumin,demethoxycurcumin, and bisdemethoxycurcumin from turmeric using supercritical fluid chromatography: From analytical to preparative scale

Curcumin is the major constituent of turmeric (Curcuma longa L.). It has attracted widespread attention for its anticancer and anti‐inflammatory activities. The separation of curcumin and its two close analogs, demethoxycurcumin and bisdemethoxycurcumin, has been challenging by conventional techniques. In this study, an environmentally friendly method based on supercritical fluid chromatography was established for the rapid and facile separation of the three curcuminoids directly from the methanol extract of turmeric. The method was first developed and optimized by ultra performance convergence chromatography, and was then scaled up to preparative supercritical fluid chromatography. Eluted with supercritical fluid CO₂ containing 8–15% methanol (containing 10 mM oxalic acid) at a flow rate of 80 mL/min, curcumin, demethoxycurcumin and bisdemethoxycurcumin could be well separated on a Viridis BEH OBD column (Waters, 250 mm × 19 mm, 5 μm) within 6.5 min. As a result, 20.8 mg of curcumin (97.9% purity), 7.0 mg of demethoxycurcumin (91.1%), and 4.6 mg of bisdemethoxycurcumin (94.8%) were obtained after a single step of supercritical fluid chromatography separation with a mean recovery of 76.6%. Showing obvious advantages in low solvent consumption, large sample loading, and easy solvent removal, supercritical fluid chromatography was proved to be a superior technique for the efficient separation of natural products.     

Separation of antiviral nucleoside phosphoramidate diastereomers by analytical supercritical fluid chromatography

Two amino acid phosphoramidates with high antiviral activity were used as model compounds and separated using supercritical fluid chromatography on an achiral Hypersil BDS cyano column (250 × 4.6 mm, 5 µm). Supercritical CO₂ was used as a mobile phase with different co-solvents, including methanol, ethanol, and 2-propanol. Several key processing parameters were evaluated, including the type and concentration of alcohol modifier (5 to 15%), backpressure (100 to 200 bar), and column temperature (30 to 45 ?C) in terms of their impact on retention factor, diastereoselectivity, and resolution. The optimized chromatographic conditions allowed for a complete separation of mixture of two diastereomers with good resolution over a short time (5–9 min). At a backpressure of 150 bar and a temperature of 33°C, the diastereomers of phenylalanine methyl ester phenyl 5′-phosphoamidate of d4T (d4T-P-N-PheOMe) and alanine methyl ester phenyl 5′-phosphoamidate of d4T (d4T-P-N-AlaOMe) were separated with resolutions of 4.43 and 2.55 using 10.0% and 5.0% (v/v) methanol, respectively.     

A comparative study of chiral separation of proton pump inhibitors by supercritical fluid chromatography and high-performance liquid chromatography

A comparative study of chiral separation of pantoprazole and rabeprazole is carried out using supercritical fluid chromatography and high-performance liquid chromatography. The columns used were Chiralpak IA and Chiralpak IE. The best mobile phase in supercritical fluid chromatography was carbon dioxide-0.2% triethylamine in methanol (60:40) and 0.1% triethylamine in n-hexane-ethanol (50:50) in high-performance liquid chromatography. For supercritical fluid chromatography, values of the retention factor of pantoprazole enantiomers were 3.97 and 4.88. These values for rabeprazole enantiomers were 6.10 and 7.52. The values of separation and resolution factor for pantoprazole and rabeprazole were 1.23 and 1.23 and 2.20 and 3.36, respectively. Similarly, for high-performance liquid chromatography, the values of retention factor for enantiomers of pantoprazole were 4.02 and 7.32. These values for rabeprazole enantiomers were 5.32 and 7.88, respectively. The values of separation and resolution factor for pantoprazole and rabeprazole were 1.82 and 1.48 and 9.22 and 6.58, respectively. A comparison was carried out, which confirmed supercritical fluid chromatography as the best method due to its fastness, eco-friendly, and inexpensiveness. The reported methods are effective, efficient, and reproducible and may be used to separate and identify pantoprazole and rabeprazole in any unknown samples.     

Packed column supercritical fluid chromatographic separation and estimation of acetaminophen, diclofenac sodium and methocarbamol in pharmaceutical dosage forms

A reproducible and fast method has been developed for the assay of acetaminophen, methocarbamol, and diclofenac sodium in bulk and drug forms using packed column supercritical fluid chromatography employing internal standard method. The analytes were resolved by elution with supercritical fluid carbon dioxide doped with 11.1% (v/v) methanol on a Shendon-Phenyl (250x4.6 mm) 5 mum column with detection monitored spectrophotometrically at 225 nm. The densities and polarities of the mobile phase were optimised from the effects of pressure, temperature and modifier concentration on chromatograhic figures like retention time (t(R), min), retention factor (k(')) etc. Modifier concentration proved to be the most effective means for changing both retention and selectivity. Calibration data and recovery of the drug from spiked concentrations were determined to assess the viability of the method. The supercritical fluid chromatography (SFC) method was directly compared to an HPLC assay, developed in the laboratory, of the same analytes. With respect to speed and use of organic solvents SFC was found to be superior, while in all other aspects the results were similar to HPLC. The method has been successfully used for the assay of two formulations containing a combination of (A) acetaminophen and methocarbamol and (B) acetaminophen and diclofenac sodium. There was no interference from excipients. The present work validates the recent proposition that supercritical fluid chromatography using CO(2) and modifiers is a viable, faster alternative to reverse phase HPLC.     

HPLC Method for Chiral Separation and Quantification of Antidepressant Citalopram and Its Precursor Citadiol

HPLC method enabling chiral separation and determination of citalopram (CIT), a widely used antidepressant, and its synthetic precursor citadiol in one analysis was developed and validated. Moreover, supercritical fluid chromatography was also tested and was proved to be less effective for this separation purpose. The optimized HPLC system was composed of Chiralcel OD-H column and n-hexane/propane-2-ol/triethylamine 96/4/0.1 (v/v/v) as mobile phase, column temperature 25 °C, flow rate 1.0 mL min^?1, UV detection at 250 nm. The effects of amount of propane-2-ol, triethylamine addition, and temperature on enantioselectivity and resolution of the enantiomers were evaluated. The method was found to be suitable for determination of the enantiomeric purity of CIT in bulk drugs. Enantiomers of CIT were determined in two commercially available pharmaceuticals.     

Validated HPLC Method for Separation and Determination of Terbutaline Enantiomers

Abstract

A simple, rapid, and validated method for separation and determination of terbutaline enantiomers was developed. Terbutaline was separated and determined on a Vancomycin Chirobiotic V column (250 × 4.6 mm), using a mixture of methanol, acetic acid, and triethylamine (100:0.1:0.1% v/v/v) as a mobile phase at 20°C and at a flow rate of 1 ml/min. The UV detector was set to 276 nm. Acetyl salicylic acid (aspirin) was used as an internal standard. The applied high-performance liquid chromatography (HPLC) method allowed separation and quantification of terbutaline enantiomers with good linearity (r > 0.999) in the studied range. The relative standard deviations (RSD) were 1.10 and 1.32% for the terbutaline enantiomers with accuracy of 99.80 and 99.55. The limit of detection and limit of quantification of terbutaline enantiomers were found to be 0.05 and 0.10 µg · ml^?1, respectively. The method was validated through the parameters of linearity, accuracy, precision, and robustness. The HPLC method was applied for the quantitative determination of terbutaline in pharmaceutical formulations.     

超临界流体色谱对吴茱萸中吲哚类生物碱的快速分析

建立了超临界流体色谱快速分析吴茱萸中吲哚类生物碱的方法。以标准品混合物和复杂样品为对象比较4种色谱柱的分离效果,进行色谱柱的筛选;考察了进样体积、改性剂、添加剂、温度和背压对保留行为的影响。结果表明,进样体积对峰形影响显著;添加剂对保留时间和色谱峰形影响有限;改变改性剂能使保留时间显著改变;降低温度,升高背压,保留时间减小。经过优化,确定采用Waters ACQUITY UPC² BEH色谱柱,以甲醇为改性剂,在35 ℃柱温和2.07×10⁷ Pa背压条件下,15 min内完成复杂样品的分析。同时采用超高效液相色谱完成复杂样品的快速分析。结果表明,超临界流体色谱可用于天然产物的高效快速分析,同时该方法与超高效液相色谱在分离选择上的差异有助于天然产物分析方法的拓展。     

Development of an Isocratic SFC Method for Four Centrally Active Muscle Relaxant Drugs

Abstract

A reproducible and selective supercritical fluid chromatography (SFC) method was developed for the estimation of four centrally active muscle relaxants, viz., chlorzoxazone, methocarbamot, tizanidine, and baclofen, using guaifenesin (expectorant, muscle relaxant) as the internal standard. The effect of temperature, pressure and the modifier concentration on retention of the five solutes has been explored and the parameters optimised. An arbitrary mixture of 5 components was base line resolved on a JASCO- RP- C₁₈ (150 × 4.6 mm) 5μ metaphase column with a tertiary mobile phase of 9.1 % modifier [methanol containing 2 % glacial acetic acid, v/v] in carbon dioxide at 1.5 ml/min, 50°C temperature, and 12.75 MPa outlet pressure. UV detection at 235 nm was employed. Without the acetic acid in the mobile phase it was not possible to elute tizanidine and baclofen. With the additive, all the analytes produced symmetrical peaks. Quantitative validation concentration ranges have been found, and the performance data evaluated.     

超高效超临界色谱分析聚合物制品中的7种添加剂

采用超高效超临界色谱(UPSFC)-二极管阵列检测器(PDA)建立了快速分析高分子材料中7种常用聚合物添加剂的方法。在检测波长为220 nm条件下,通过考察样品的稀释溶剂、流动相添加剂、柱温、背压、柱流速对分离的影响,最终确定7种添加剂分离的最优化条件：采用正己烷/异丙醇(1/1,v/v)为稀释溶剂,流动相添加剂为甲醇/乙腈(1/1,v/v),流速2 mL/min,柱温50 ℃,背压12.41~13.79 MPa条件下,7种聚合物添加剂能够在5 min之内达到完全基线分离。利用微波辅助萃取方法对实际样品中的添加剂进行提取,经UPSFC-PDA分析,7种添加剂的回收率为69.9%~118.9%,相对标准偏差(RSD,n=9)低于10%。该方法简便、快速,选择性强,能够准确快速地分析聚合物制品中的添加剂。     

Separation of Chlorophylls and Their Degradation Products using Packed Column Supercritical Fluid Chromatography (SFC)

Complex mixtures of chlorophyll degradation products may arise during processing and storage of vegetable oil and green plant materials like broccoli and spinach. Determination of these compounds is important in the area of food chemistry. Therefore a method using packed column supercritical fluid chromatography (SFC) has been developed. The method comprises chromatography using a simple gradient of methanol in carbon dioxide at constant column back pressure of 30 MPa and a column temperature of 40°C. Effects of pressure and mobile phase composition showed the importance of applying a modifier gradient for optimal separation of the chlorophyll products. The method permits separation of 15 chlorophyll derivatives including chlorophyll a and b, pheophytins, and pyropheophytins on a C₁₈ column in about 20 minutes. Identifications of the individual peaks were based on reference compounds, the retention order of the compounds, and their absorption spectra.     

Development of a supercritical fluid chromatography high-resolution separation method suitable for pharmaceuticals using cyanopropyl silica

A method has been developed for the analysis of a broad spectrum of pharmaceuticals using packed column supercritical fluid chromatography (pSFC) on a cyanopropyl silicagel stationary phase. Five 25 cm x 4.6 mm I.D., 5.0 microm columns were coupled to generate ca. 100000 plates. The selectivity was tuned by varying the nature and concentration of various modifiers and additives in the carbon dioxide mobile phase. It was noted that pressure influences both efficiency and selectivity of the chromatographic process. Final method conditions are: outlet pressure 100 bar, flow 2.0 mL/min, temperature 40 degrees C, organic modifier program from 5% (1 min) to 40% at 2.0%/min, organic modifier composition methanol:acetonitrile in a ratio of 3:1 (variable according to sample composition) with peak symmetry additives trifluoroacetic acid and diisopropylamine both at levels of 0.5%.     

纤维素衍生物手性固定相高效液相色谱法分离盐酸川丁特罗对映体

以纤维素三-(3,5-二甲基苯基氨基甲酸酯)为手性固定相(Lux Cellulose-1),建立了在正相色谱条件下直接分离盐酸川丁特罗对映体的高效液相色谱法。考察了乙醇、异丙醇等有机改性剂,三氟乙酸、二乙胺等流动相添加剂和柱温对对映体分离的影响。结果显示,酸性和碱性添加剂对对映体分离的影响最为显著: 添加二乙胺时两对映体无分离趋势;添加三氟乙酸时对映体保留强,且分离趋势明显;而同时添加三氟乙酸和二乙胺则两对映体分离显著改善,分离度可达4.0。优化后的色谱条件: 色谱柱为Lux Cellulose-1手性柱(250 mm×4.6 mm, 5 μm),流动相为正庚烷-乙醇-三氟乙酸-二乙胺(88:12:0.3:0.05, v/v/v/v),流速为1.0 mL/min,紫外检测波长为246 nm,柱温为25 ℃。该方法简便,快速,可用于左旋盐酸川丁特罗原料中右旋异构体杂质的检查。