Chemical separation for identification of new isotope202Pt

A separation procedure of trace platinum from large amounts of mercury and other interfering elements is described. After irradiation, the HgO target was dissolved in concentrated HCl solution. The thallium fraction was removed by solvent extraction with ether. In the aqueous phase after extraction the radioisotope of platinum produced by irradiation was precipitated as (NH₄)₂PtCl₆ by adding a saturated solution of NH₄Cl in the presence of H₂PtCl₆·6H₂O as stable carrier. The decontamination factor of mercury, gold and thallium and the recovery of platinum in the process of separation are satisfactory.     

Extraction of Hg/II/ with dibutylester of N-/4-antipyryl/-amidophosphoric acid from iodide solutions

A new extraction reagent-dibutylester of N-/4-antipyryl/-amidophosphoric acid/DBAAP/—has been developed and used for the extraction of divalent mercury into chloroform from mixture of sodium iodide and perchloric acid. It was found that the composition of the species extracted into the organic phase depends on the acidity of the aqueous phase. The solvate HgI₂. DBAAP is extracted at low HClO₄ concentrations, an ion-pair, /DBAAPH/⁺.HgI ₃ ^– , is formed and extracted at high concentrations of perchloric acid.     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

Sorption of mercury on chemically synthesized polyaniline

Summary Sorption of inorganic mercury (Hg²⁺) and methyl mercury, on chemically synthesized polyaniline, in 0.1-10N HCl solutions has been studied. Hg²⁺ is strongly sorbed at low acidities and the extent of sorption decreases with increase in acidity. The sorption of methyl mercury is very low in the HCl concentration range studied. Sorption of Hg²⁺ on polyaniline in 0.1-10N LiCl and H₂SO₄ solutions has also been studied. The analysis of the data indicates that the sorption of Hg²⁺ depends on the degree of protonation of polyaniline and the nature of mercury(II) chloride complexes in solution. X-ray photoelectron spectroscopy analysis (XPS) of polyaniline sorbed with mercury show that mercury is bound as Hg²⁺. Sorbed mercury is quantitatively eluted from polyaniline with 0.5N HNO₃. Polyaniline can be used for separation and pre-concentration of inorganic mercury from aqueous samples.     

Determination of Organic and Inorganic Mercury Species as Emetine Dithiocarbamate Complexes by High-Performance Liquid Chromatography with Electrogenerated Tris(2,2′-bipyridine)ruthenium(III) Chemiluminescence Detection

A sensitive method for simultaneous determination of organic and inorganic mercury species has been developed and is presented in this study. The method is based on complex formation of mercury species with the emetine dithiocarbamate (emetine-CS₂) ligand, HPLC separation, and tris(2,2′-bipyridine)ruthenium(III) chemiluminescence detection. The complexation reactions of the mercury species and emetine-CS₂ ligand occurred instantaneously upon the addition of emetine-CS₂ solution to the solution containing the mercury species. The complete separation of these complexes was achieved using an ODS column with 20 mM NaH₂PO₄-acetonitrile (52:48, v/v) containing 30 mM NaClO₄ as an ion-pair reagent. The calibration graphs of these complexes were linear in the range from 1–100 µg/L. The detection limits were 0.27 µg/L, 0.33 µg/L, 0.39 µg/L, and 0.17 µg/L for methylmercury, ethylmercury, phenylmercury, and the mercury ion, respectively, at a signal-to-noise ratio of 3. The developed technique was validated by analyzing certified reference materials, CRM7402-a (cod fish, NMIJ) and CE464 (tuna fish, ERM), in combination with sonication-assisted acid leaching and liquid-liquid extraction. The emetine-CS₂ ligand has been used for extraction, separation, and detection of mercury species. The results determined using the proposed method were in good agreement with the values of the certified reference materials. The MeHg⁺ and EtHg⁺ recoveries for the spiked samples were found to be almost 100%.     

A new room temperature ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate as a solvent for extraction and preconcentration of mercury with determination by cold vapor atomic absorption spectrometry

A new room temperature ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate abbreviated as [C₄tmsim][PF₆] was synthesized and developed as a novel medium for liquid/liquid extraction of inorganic mercury in this work. Under optimal condition, o-carboxyphenyldiazoamino-p-azobenzene abbreviated as CDAA reacted with inorganic mercury to form a neutral Hg-CDAA complex, the complex was rapidly extracted into ionic liquid phase. After back-extracting into aqueous phase with sulfide sodium solution, the mercury concentration was detected by cold vapor atomic absorption spectrometry. The extraction and back-extraction efficiencies were 99.9 and 100.1% for 5.0 μg L⁻¹ standard mercury in 1000 mL of water solution, respectively. The detection limit, calculated using three times the standard error of estimate of the calibration graph, is 0.01 ng of mercury per milliliter water sample. The proposed method has been used to the determination of trace inorganic mercury in natural water with satisfactory results. Moreover, Zeta potential and surface tension of [C₄tmsim][PF₆] solution were measured and applied to explain the extraction mechanism of [C₄tmsim][PF₆] system.     

Extraction of mercury from aqueous iodide solutions by trilaurylamine N-oxide and its subsequent determination by atomic absorption spectrometry

A solvent extraction technique using 0.01M solution of trilaurylamine N-oxide in benzene as extractant has been used to concentrate mercury efficiently from water solutions with or without the presence of 0.02M KI in weakly acidic media. In addition to unmodified aqueous solutions, mercury can be extracted quantitatively from aqueous iodide solutions that are up to 1M in HCl, H₂SO₄, and HNO₃ in a single equilibration. Distribution coefficients and separation factors of several elements relative to mercury(II) are reported for media that contain 0.1 M HCl and 0.02M KI. The reagent is superior to aliphatic amines and quaternary amines for the extraction of mercury from aqueous iodide solutions.     

Solvent extraction of chromium(VI) from base metal ions with diphenyl-2-pyridylmethane as a liquid anion exchanger

The extraction of chromium(VI) from aqueous hydrochloric, nitric and sulfuric acid solutions by diphenyl-2-pyridylmethane(DPPM) dissolved in chloroform has been studied. Chromium(VI) is quantitatively extracted from hydrochloric acid solutions in the range 0.1–1M. With increasing acid concentration, the extraction of chromium diminishes and in concentrated acid solutions practically all the chromium remains in the aqueous phase. The quantitative back-extraction of chromium from the organic phase is possible with HCl or HNO₃ at concentrations higher than 5M through the use of reducing agents. The composition of the extracted chromium(VI) species was studied in solution. The complexes (DPPMH)⁺HCrO ₄ ⁻ and (DPPMH)₂Cr₂O ₇ ⁻ are extracted for tracer and macro amounts of chromium(VI) respectively. The data have been utilized for the separation of chromium(VI) from base metal ions.     

Tandem focused ultrasound (TFU) combined with fast furnace analysis as an improved methodology for total mercury determination in human urine by electrothermal-atomic absorption spectrometry

A new sample preparation procedure based on tandem (that is, different diameter probe sonicators used in the same sample treatment) focused ultrasound (TFU) for mercury separation, preconcentration and back-extraction in aqueous solution from human urine has been developed. The urine is first oxidized with KMnO₄/HCl/focused ultrasound (6 mm probe). Secondly, the mercury is extracted and preconcentrated with dithizone and cyclohexane. Finally, the mercury is back-extracted and preconcentrated again with the aid of focused ultrasound (3 mm probe). The procedure allows determining mercury by electrothermal atomic absorption spectrometry with fast furnace analysis and calibration against aqueous standards. Matrix modification is provided by the chemicals used in the sample treatment. The procedure is accomplished with low sample volume (8.5 ml). Low volume and low concentration reagents are used. The sample treatment is rapid (less than 3 min per sample) and avoids the use of organic phase in the graphite furnace. The preconcentration factor used in this work was 14. The limit of detection and the limit of quantification in urine were, respectively, 0.27 and 0.9 μg l⁻¹. The relative standard deviation of aqueous standards (n=10) was 4% for a concentration of 100 μg l⁻¹ and 5% for a concentration of 400 μg l⁻¹. Recoveries from spiked urine with inorganic mercury, methyl-mercury, phenyl-mercury and diphenyl-mercury ranged from 86 to 98%.     

Sensitive and selective determination of mercury by differential pulse stripping voltammetry after accumulation of mercury vapour on a gold plated graphite electrode

 A selective and sensitive method is proposed for the determination of mercury by anodic stripping voltammetry after its preconcentration from the gas phase. Mercury from the sample solution is reduced to elemental Hg by SnCl₂ and volatilized by the bubbles of a carrier gas. The gas containing mercury vapour is dried and passed through a capillary onto a gold coated graphite electrode. An anodic stripping voltammogram is recorded from 0.1 mol/l HClO₄+3×10^-3 mol/l HCl solution. The calibration curve is linear from 1×10^-9 to 4×10^-8 mol/l Hg(NO₃)₂. The absolute detection limit is 0.46 ng Hg. The relative standard deviations for 4×10^-9 mol/l and 2×10^-8 mol/l Hg(NO₃)₂ are 9.8% and 6.1%, respectively (n=5). Received: 18 December 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

Gravimetric and spectrophotometric determination of mercury with n-benzoyl-n-phenylhydroxylamine

N-Benzoyl-N-phenylhydroxylamine (BPHA) is suggested for the gravimetric determination of mercury(II) at pH 3.0–6.0; the precipitate, Hg(C₁₃H₁₀O₂N)₂, is dried at 105° and weighed. Separation from NH₄⁺, Pb, Bi, Sb, As, Cd, Sn, etc. is possible, but chloride, cyanide and (EDTA) interfere. Mercury(II) can also be extracted with a BPHA solution in chloroform: the extracted mercury complex is yellow and shows an absorbance maximum at 340 mμ. The optimum concentration range for determination is 15–52 μg Hg/ml, the molar extinction coefficient is 2693 ±10 and the sensitivity is 0.075 μg/cm². Interferences are similar to those found in the gravimetric method.     

Extraction of metals by neutral sulfur-containing extractants: Part I. o-isopropyl-n-ethylthiocarbamate

The formation of neutral mixed complexes of the MX_mS_p type (where M is a metal ion with m⁺ charge, X the inorganic anion, and S the sulfur-containing extractant) allows a selective extraction of various elements. The extraction of many metals from mineral acid solutions or from halide-sulfuric acid mixtures by 0.05 M O-isopropyl-N-ethylthiocarbamate(IPETC) solution in chloroform has been studied. (IPETC) possesses very high selectivity for silver and mercury ions in extractions from HNO₃, H_{2)SO4, HClO4 and HCl solutions. In addition to silver and mercury, Cu, Au, Tl and Se are readily extracted from solutions containing bromide. From iodide solutions, copper, gold and thallium ions may be selectively extracted because silver and mercury cannot be extracted at concentrations of iodide above 0.1 M.(IPETC} extracts metals as mixed complexes, containing the halide and apparently the extractant in the molecular form.     

Sensitive and selective determination of mercury by differential pulse stripping voltammetry after accumulation of mercury vapour on a gold plated graphite electrode

A selective and sensitive method is proposed for the determination of mercury by anodic stripping voltammetry after its preconcentration from the gas phase. Mercury from the sample solution is reduced to elemental Hg by SnCl₂ and volatilized by the bubbles of a carrier gas. The gas containing mercury vapour is dried and passed through a capillary onto a gold coated graphite electrode. An anodic stripping voltam-mogram is recorded from 0.1 mol/1 HClO₄ + 3 × 10⁻³ mol/1 HCl solution. The calibration curve is linear from 1 × 10⁻⁹ to 4 × 10⁻⁸ mol/1 Hg(NO₃)₂. The absolute detection limit is 0.46 ng Hg. The relative standard deviations for 4 × 10⁻⁹ mol/1 and 2 × 10⁻⁸ mol/1 Hg(NO₃)₂ are 9.8% and 6.1%, respectively n = 5).     

A rapid separation of radioactive cesium by nitrobenzene extraction using the chromium complex [Cr(aniline)2(NCS)4]−

A rapid separation of radioactive cesium by the solvent extraction method was investigated. Cesium ions are quantitatively extracted with [Cr(NH₂C₆H₅)₂(NCS)₄]⁻ into nitrobenzene. EDTA is an effective masking agent for other polyvalent cations. The extracted cesium can be back-extracted into the aqueous phase by shaking with 6N HCl. The method was applied to samples of a natural mixture of fission products and a reactor coolant. The decontamination factors for other predominant isotopes in fission products were 10²∼10⁴. The separation of^137m Ba from a mixture of¹³⁷Cs and^137m Ba is also described.     

流动注射在线吸附预富集-冷蒸气原子荧光法测定矿泉水中的痕量无机汞

研究了聚四氟乙烯管编结反应器(KR)在线吸附预富集技术与冷蒸气原子荧光联用测定矿泉水中痕量无机汞的方法.Hg2+与DDTC在线形成Hg2+-DDTC络合物并吸附在KR内壁上,采用电磁感应加热技术,用20% (V/V) HNO3在线加热洗脱并氧化预富集于KR内壁上的Hg2+-DDTC.洗脱液与KBH4溶液反应生成蒸气态汞,直接用冷蒸气原子荧光联用技术检测.20%(V/V)HNO3作为洗脱液的同时也为氢化发生提供了酸性介质.本方法未使用常用的有机洗脱液,具有操作简单和环保等优点.每小时可分析30个样品,最大吸附倍数为35倍,样品分析精密度RSD为2.2%(n=11),检出限(3σ)为2.0 ng/L.     

Optimisation of a Flow Injection System with a Piezoelectric Quartz Crystal Detector for the Determination of Inorganic Mercury

ABSTRACT

A new method combining flow injection methodology with quartz crystal microbalance (QCM) detection is proposed for inorganic mercury analysis. A modified simplex method is used in order to maximise the observed analytical signals (crystal frequency decrease). Six parameters were optimised: the concentration of the acidic carrier solution, the lengths of the sample loop and mixing coil, and the flow rates of the sample carrier, the reductant stream (SnCl₂), and the carrier of the mercury vapour (N₂). An increase of 18% in the signal of the centroid of the calibration line was achieved, as well as an increase in the sensitivity from 290 Hz μg^? to 313 Hz μg^?. Following the proposed procedure, detection limits of 47 μg L^? of inorganic mercury were found for sample volumes of 0.5 mL.     

Determination of sulfite by reaction with mercury(I) chloride and spectrophotometric measurement of mercury(II) complexes

Sulfite ion was determined in the 0.4 to 12-ppm range by reaction with insoluble mercury(I) chloride to form the soluble Hg(SO₃)₂^staggered2? ion and elemental mercury. The uv absorption of the sulfite complex or an anion species, HgX₄^staggered2?, formed on adding an excess of KBr, KCl, KI, or KSCN is measured. The mercury(II) in solution can also be determined by lowering the pH, adding KCl, and forming the crystal violet adduct of the HgCl₃^staggered? ion. This adduct is extracted into benzene and the absorbance measured at 605 nm.     

Ultrasonic-assisted supramolecular solvent-based liquid phase microextraction of mercury as 1-(2-pyridylazo)-2-naphthol complexes from water samples

A separation-preconcentration method based on supramolecular solvent ultrasonic-assisted liquid-phase microextraction (Ss-USA-LPME) for spectrophotometric determination of mercury as 1-(2-pyridylazo)-2-naphthol (PAN) chelates has been established. Red coloured Hg(II)-PAN hydrophobic complex was extracted into the supramolecular phase (1-decanol/THF) at pH 9.5. The extract was separated from aqueous phase by centrifugation, diluted with ethanol and determined by UV–Vis spectrophotometer at λ_max = 560 nm. The influences of important analytical parameters such as pH, amount of PAN, 1-decanol and THF, sample volume and matrix effects for the quantitative recoveries were examined and optimised. Under the optimised experimental conditions, the amount of ligand, 1-decanol and THF were 1.0 × 10^–4 M, 200 µL and 300 µL, respectively. The optimum time of ultrasonic bath and centrifugation were found as 2 min and 5 min. A linear calibration graph was obtained linearly in the concentration ranges of 8.3–1000 µg L^?1. The preconcentration factor was obtained as 20. The limit of detection (LOD) was 2.6 µg L^?1 with the relative standard deviation (RSD) of 2.4% for mercury (C = 100 µg L^?1, n = 7). The validity of the developed Ss-USA-LPME technique was checked with a certified reference material of NIST 1641d. The presented method has been successfully applied to the determination of mercury in water samples.     

Preconcentration of inorganic mercury and organic mercury with solvent extraction for neutron activation analysis

A preconcentration method combined with neutron activation technique for the analysis of organic and inorganic mercury in waste water samples at ppb levels is presented. The inorganic mercury is extracted in CCl₄ solution with lead diethyldithiocarbamate reagent and the organic mercury is extracted in C₆H₆ solution. Interfering activities of sodium and bromine are removed from the irradiated samples by this procedure. Two different solvent extraction procedures are also described in detail.     

Selective extraction of thallium(III) in the presence of gallium(III), indium(III), bismuth(III) and antimony(III) by salting-out of an aqueous mixture of 2-propanol

Thallium(III), in the presence of other triply charged ions such as gallium, indium, bismuth and antimony in aqueous solution, was quantitatively and selectively extracted into 2-propanol/water phase by addition of NaCl ranging from 2.5 to 4.0 mol dm⁻³. The extraction efficiencies of gallium, indium, bismuth and antimony were much lower than that of thallium(III). Thus a maximal selective separation of thallium(III) from these elements could be attained using a 2-propanol/water mixture. Thallium(III) was extracted as TlCl₄⁻ with Na⁺. The detailed extraction mechanism in the presence of chloride, water in the organic phase and counter ions is discussed.