磁性印迹纳米粒子固定血红蛋白修饰磁性电极构建过氧化氢传感器

采用表面印迹技术,以磁性二氧化硅纳米粒子（Fe₃O₄@SiO₂ NPs）作为载体、血红蛋白（Hb）为模板分子、正硅酸乙酯（TEOS）为印迹聚合物单体,制备了Hb印迹Fe₃O₄@SiO₂的磁性印迹纳米粒子（MMIPs NPs）. MMIPs NPs具有磁性内核和血红蛋白印迹壳层的核壳结构,可以富集并固定Hb. 使用壳聚糖将MMIPs NPs固定于磁性电极表面,构建血红蛋白类酶生物传感器,研究了Hb对过氧化氢（H₂O₂）的催化活性. MMIPS NPS相比于磁性非印迹纳米粒子（MNIPS NPS）,催化电流增加了14.3%. 采用磁性电极,MMIPS NPS、Hb和O₂的顺磁性使得该类酶生物传感器对H₂O₂的催化电流增加了60.0%. 血红蛋白类酶生物传感器电流响应与H₂O₂浓度在25 ~ 200 μmol·L^-1间呈线性关系,检出限为3 μmol·L^-1（S/N=3）,表明该类酶传感器对H₂O₂具有良好的催化性能.     

A Novel Biomolecular Immobilization Matrix Based on Nanoporous ZnO／Chitosan Composite Film for Amperometric Hydrogen Peroxide Biosensor

The performance of an enzyme electrode often depends on the method of enzyme immobilization when fabricating biosensors1. Therefore, the technique used to immobilize the enzyme is one of the key factors in developing a reliable biosensor. Organic-inorganic composite (or hybrid) materials have emerged in recent years. It combines the physicochemical attributes of components and improves their features. Organic components benefit the formation of defect-free inorganic membranes and make it less …     

Immobilization of Hemoglobin on the Gold Colloid Modified Pretreated Glassy Carbon Electrode for Preparing a Novel Hydrogen Peroxide Biosensor

A novel hydrogen peroxide (H₂O₂) biosensor was developed by immobilizing hemoglobin on the gold colloid modified electrochemical pretreated glassy carbon electrode (PGCE) via the bridging of an ethylenediamine monolayer. This biosensor was characterized by UV-vis reflection spectroscopy (UV-vis), electrochemical impendence spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Hb exhibited excellent electrocatalytic activity for hydrogen peroxide. The Michaelis–Menten constant (K _m) was 3.6 mM. The currents were proportional to the H₂O₂ concentration from 2.6 × 10⁻⁷ to 7.0 × 10⁻³ M, and the detection limit was as low as 1.0 × 10⁻⁷ M (S/N = 3).     

Reagentless Biosensor for Hydrogen Peroxide Based on the Immobilization of Hemoglobin in Platinum Nanoparticles Enhanced Poly(chloromethyl thiirane) Cross‐linked Chitosan Hybrid Film

An unmediated hydrogen peroxide (H₂O₂) biosensor was prepared by co‐immobilizing hemoglobin (Hb) with platinum nanoparticles enhanced poly(chloromethyl thiirane) cross‐linked chitosan (CCCS‐PNs) hybrid film. CCCS could provide a biocompatible microenvironment for Hb and PNs could accelerate the electron transfer between Hb and the electrode. Spectroscopic analysis indicated that the immobilized Hb could maintain its native structure in the CCCS‐PNs hybrid film. Entrapped Hb exhibited direct electrochemistry for its heme Fe(III)/Fe(II) redox couples at ?0.396 V in the CCCS‐PNs hybrid film, as well as peroxidase‐like activity to the reduction of hydrogen peroxide without the aid of an electron mediator.     

Hydrogen Peroxide Biosensor Based on Immobilization of Hemoglobin on Au@Ag Nanoparticles Modified Carbon Ionic Liquid Electrode

A hydrogen peroxide (H₂O₂) biosensor based on the combination of Au@Ag core‐shell nanoparticles with a hemoglobin‐chitosan‐1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (Hb‐CHIT‐BMIM×BF₄) composite film was prepared. UV‐vis spectroscopy and transmission electron microscopy confirmed a core‐shell nanostructure of Au@Ag nanoparticle was successfully obtained. Cyclic voltammetric results showed a pair of well‐defined redox peaks appeared with the formal potential (E^O′) of ‐0.301 V (versus Ag/AgCl reference electrode) and the peak‐to‐peak separation (ΔE_p) was 84 mV in 0.1 M phosphate buffer solutions. Due to the synergetic effect of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄, the biosensor exhibited good electrocatalytic activity to the reduction of H₂O₂ in a linear range from 1.0 × 10^?6 to 1.0 × 10^?3 M with a detection limit of 4 × 10^?7 M (S/N = 3). The apparent Michaelis‐Menten constant (K_M) was estimated to be 4.4 × 10^?4 M, showing its high affinity. Thus, the study proved that the combination of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄ is able to open up new opportunities for the design of enzymatic biosensors.     

A Sensitive Hydrogen Peroxide Sensor Based on Hemoglobin Immobilized on Gold Nanoparticles and 1,6-hexanedithiol Modified Gold Electrode

Hemoglobin (Hb) was successfully immobilized on a gold electrode modified with gold nanoparticles (AuNPs) via a molecule bridge 1,6-hexanedithiol (HDT). The AFM images suggested that the HDT/gold electrode could adsorb more AuNPs. UV-vis spectra indicated that Hb on AuNPs/HDT film retained its near-native secondary structures. The electrochemical behaviors of the sensor were characterized with cyclic voltammetric techniques. The resultant electrode displayed an excellent electrocatalytical response to the reduction of hydrogen peroxide (H₂O₂). The linear relationship existed between the catalytic current and the H₂O₂ concentration ranging from 5.0 × 10^?8 to 1.0 × 10^?6 mol · L^?1. The detection limit (S/N = 3) was 1.0 × 10^?8 mol · L^?1.     

基于硫堇/碳纳米管修饰电极的新型过氧化氢电化学传感器

基于碳纳米管(CNTs)和硫堇(Th)的协同效应,将辣根过氧化物酶(HRP)通过戊二醛(GA)交联作用固定在硫堇(Th)/CNTs修饰电极上,构造了一种新型酶电极(HRP/GA-Th/CNTs/GC)。CNTs静电吸附正电荷的Th,而Th不仅可以促进电极和酶的氧化还原活性中心之间的电子传递,而且能使CNTs氨基(—NH2)功能化,从而利于HRP的固定。基于HRP/GA-Th/CNTs/GC电极的过氧化氢传感器具有较好的传感性能,且检出限低(0.3μmol.L-1)、响应时间短(5 s内)、抗干扰能力强。     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…     

Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Immobilized on Fe3O4/Chitosan Modified Glassy Carbon Electrode

A new type of amperometric hydrogen peroxide biosensor was constructed based on horseradish peroxidase (HRP) immobilized on Fe₃O₄/chitosan modified glassy carbon electrode. The effects of some experimental variables such as the concentration of supporting electrolyte, pH, enzyme loading, the concentration of the mediator of methylene blue (MB) and the applied potential were investigated. The linear range of the calibration curve for H₂O₂ was 2.0×10^?4–1.2×10^?2 M with a detection limit of 1.0×10^?4 M (S/N=3). The response time was less than 12 s. The apparent Michaelis‐Menten constant K_m was 21.4 mM and it illustrated the excellent biological activity of the fixed enzyme. In addition, the biosensor had long‐time stability and good reproducibility. And this method has been used to determine H₂O₂ concentration in the real sample.     

An Unmediated Hydrogen Peroxide Sensor Based on a Hemoglobin-sds Film Modified Electrode

ABSTRACT

An unmediated hydrogen peroxide sensor is designed in this paper by employing a hemoglobin-SDS film modified electrode. Hemoglobin exhibits direct (unmediated) electrochemistry at the modified electrode. The protein also shows elegant catalytic activity towards the electrochemical reduction of hydrogen peroxide. Consequently, a prototype hydrogen peroxide sensor is prepared. Under optimum conditions, this sensor provides a linear response over the hydrogen peroxide concentrations in the range of 1×10^-5～1×10^-4 mol/L. The detection limit was 2×10^-6 mol/L The relative standard deviation was 4.2% for 6 successive determinations of the hydrogen peroxide at 1×10^-5 mol/L. This configuration is shown to be sensitive, stable and easily fabricated. It might be useful in the biological and industrial fields.     

Sensitive Electrochemical Determination of Hydrogen Peroxide Using Copper Nanoparticles in a Polyaniline Film on a Glassy Carbon Electrode

Rapid and accurate determination of hydrogen peroxide is necessary in biochemistry and environmental science. In this paper, a sensitive hydrogen peroxide electrochemical sensor was developed by cyclic voltammetry deposition of polyaniline–copper nanocomposite film on a glassy carbon electrode. The synthesized polyaniline/Cu composites were characterized by scanning electron microscopy and X-ray diffraction. With a typical working potential of 0.4?V (versus Ag/AgCl) and a pH value of 6.0, the prepared electrochemical sensor achieved linear range of 1.0–500?µM for hydrogen peroxide detection. A relative standard deviation of 4.9% for n?=?7 and 10.0?µM of H₂O₂ and a limit of detection of 0.33?µM at a signal-to-noise ratio?=?3 were observed. The sensor was successfully used for the analysis of tap water, and a spiked recovery of 93.0?±?2.1% was obtained, further confirming the sensor’s accuracy and feasibility.     

壳聚糖/聚乙烯吡咯烷酮固定辣根过氧化物酶的过氧化氢生物传感器

用一种新型的壳聚糖(CS)/聚乙烯吡咯烷酮(PVP)复合膜在玻碳电极(GCE)上固定辣根过氧化物酶(HRP)。以乙二醛作交联剂,二茂铁(Fc)作媒介体,制备过氧化氢生物传感器。红外光谱表明:CS与PVP交联形成了一种新的高聚物,实验结果证明该聚合物适合辣根过氧化物酶的固定。该传感器对于H2O2的电流响应在5 s内即可达到最大,线性范围为6.0×10-6~1.7×10-4mol/L;检出限为2.5×10-6mol/L。该传感器的检测灵敏度为62.5μA/mmol/L。     

血红蛋白在壳聚糖修饰碳纳米管上的电化学特性及对过氧化氢的电催化分析

用壳聚糖对多壁碳纳米管进行修饰,构建了一种用于固定血红蛋白的新型复合材料,并研究了血红蛋白在该碳纳米管上的电化学性质及其对过氧化氢的电催化活性.扫描电镜结果表明,壳聚糖修饰的多壁碳纳米管呈单一的纳米管状,并能均匀分散在玻碳电极表面.紫外光谱分析表明血红蛋白在该复合膜内能很好地保持其原有的二级结构.将该材料固定在玻碳电极上后,血红蛋白能成功地实现其直接电化学.根据峰电位差随着扫描的变化,计算得到血红蛋白在壳聚糖修饰的碳纳米管膜上的电荷转移系数为0.57,表观电子转移速率常数为7.02 s-1.同时,该电极对过氧化氢显示出良好的催化性能,电流响应信号与H2O2浓度在1.0×10-6 ～1.5×10-3 mol/L间呈线性关系,检出限为5.0×10-7 mol/L.修饰电极显示了良好的稳定性.     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.     

A Nonenzymatic Hydrogen Peroxide Sensor Based on Silver Nanowires and Chitosan Film

A nonenzymatic amperometric electrochemical sensor for the detection of hydrogen peroxide (H₂O₂) was fabricated based on highly dense silver nanowires (Ag NWs) and chitosan (CS) film. Ag NWs were synthesized by a poly(vinyl pyrrolidone) (PVP)‐mediated polyol process in the presence of manganese chloride (MnCl₂), and were characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), and X‐ray diffraction (XRD). Under the optimal conditions, the proposed nonenzymatic sensor exhibited good electrocatalytic activity towards the reduction of H₂O₂, and could detect H₂O₂ in the linear range of 0.008–1.35 mM, with a detection limit of 2 µM (S/N=3).     

血红蛋白和SiO2凝胶层层组装膜在碳纳米管/金纳米粒子修饰电极界面上的直接电化学及电催化研究

以SiO2凝胶膜和蛋白质交互组装法固定血红蛋白(Hb), 对其进行了电化学和电催化研究. 首先制备碳纳米管/金纳米粒子复合材料修饰的MWNTs-Au/GC电极, 为防止蛋白质在电极表面流失, 将Hb和自制的SiO2凝胶膜交替滴涂到电极表面, 得到SiO2/Hb层层组装膜修饰电极, 即{SiO2/Hb}n/MWNTs-Au/GC电极, n=2为优化层数. Hb在{SiO2/Hb}2/MWNTs-Au/GC电极上仍能保持其特有的生物活性, 并能与电极进行稳定快速的电子直接转移, 同时表现出过氧化物酶特性, 对H2O2具有良好的生物电催化还原能力.     

基于金纳米棒-壳聚糖复合膜的葡萄糖生物传感器

本文采用金纳米棒-壳聚糖复合膜固定葡萄糖氧化酶构建电流型葡萄糖生物传感器.通过电化学交流阻抗法和循环伏安法对酶膜状态进行了表征,得到了相应的等效电路和动力学参数.实验结果表明,金纳米棒-壳聚糖复合膜可以辅助电子传递,提高电极的电流响应,并使生物传感器的使用温度范围有很大的扩展.此传感器表现出对葡萄糖溶液浓度的优良响应,线性范围在2.78×10^-5mol/L—2.22×10^-3mol/L,响应灵敏度约为7.819μA·cm^-2(mmol/L)^-1,表观米氏常数为10mmol/L.本工作还研究了温度和溶液pH值对电极电流响应的影响.     

Development of Nonenzymatic Hydrogen Peroxide Sensor Based on Successive Pd‐Ag Electrodeposited Nanoparticles on Glassy Carbon Electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing palladium? silver nanoparticles (NPs) on a glassy carbon electrode. The morphology of the modified electrode was characterized by Scanning electron microscopy (SEM). The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability, high sensitivity, excellent selectivity towards reduction of hydrogen peroxide (H₂O₂). The response to H₂O₂ is linear in the range between 0.30 μM to 2.50 mM, and the detection limit is 0.1 μM (at an S/N of 3).     

Multilayer Assembly of Hemoglobin and Colloidal Gold Nanoparticles on Multiwall Carbon Nanotubes/Chitosan Composite for Detecting Hydrogen Peroxide

Chitosan (CS) was chosen for dispersing multi‐wall carbon nanotubes (MWNTs) to form a stable CS‐MWNTs composite, which was first coated on the surface of a glassy carbon electrode to provide a containing amino groups interface for assembling colloidal gold nanoparticles (GNPs), followed by the adsorption of hemoglobin (Hb). Repeating the assembly step of GNPs and Hb resulted in {Hb/GNPs}_n multilayers. The assembly of GNPs onto CS‐MWNTs composites was confirmed by transmission electron microscopy. The consecutive growth of {Hb/GNPs}_n multilayers was confirmed by cyclic voltammetry and UV‐vis absorption spectroscopy. The resulting system brings a new platform for electrochemical devices by using the synergistic action of the electrocatalytic activity of GNPs and MWNTs. The resulting biosensor displays an excellent electrocatalytic activity and rapid response for hydrogen peroxide. The linear range for the determination of H₂O₂ was from 5.0×10^?7 to 2.0×10^?3 M with a detection limit of 2.1×10^?7 M at 3σ and a Michaelis–Menten constant K_M^app value of 0.19 mM.     

基于普鲁士蓝/二氧化锰复合材料修饰电极上的无酶过氧化氢传感器

合成了一种普鲁士蓝/二氧化锰(PB/MnO2)复合材料。表征结果显示两者成功地复合在一起。电化学测试结果表明复合材料比单独的PB具有更好的电化学活性。由修饰玻碳电极(GCE)构建的传感器对过氧化氢(H2O2)的还原具有良好的稳定性、重现性和选择性。