The Preparation and Characterization of La Doped TiO2 Nanotubes and Their Photocatalytic Activity

La-doped TiO₂ nanotubes (La/TiO₂ NTs) were prepared by the combination of sol-gel process with hydrothermal treatment. The prepared samples were characterized by using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectra, and ultraviolet-visible spectra. The photocatalytic performance of La/TiO₂ NTs was studied by testing the degradation rate of methyl orange under ultraviolet (UV) irradiation. The results indicated La/TiO₂ NTs calcined at 300°C consisted of anatase as the unique phase. The absorption spectra of the La/TiO₂ NTs showed a stronger absorption in the UV range and a slight red shift in the band gap transition than that of pure TiO₂ nanotubes. The photocatalytic performance of TiO₂ NTs could be improved by the doping of lanthanum ions, which is ascribed to several beneficial effects the formation of Ti-O-La bond and charge imbalance, existing of oxygen defects and Ti³⁺ species, stronger absorption in the UV range and a slight red shift in the band gap transition, as well as higher equilibrium dark adsorption of methyl orange. 0.75 wt% La/TiO₂ NTs had the best catalytic activity.     

浸渍-分解法制备高可见光催化活性的Bi2O3/TiO2纳米管阵列

用浸渍-分解法将Bi₂O₃纳米颗粒沉积在TiO₂纳米管壁上, 制备了Bi₂O₃/TiO₂纳米管阵列. 用电感耦合等离子体发射光谱(ICP-AES)测定了Bi₂O₃/TiO₂ 纳米管阵列的化学组分, 利用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 通过在可见光下(λ>400 nm)降解甲基橙(MO)水溶液来评价样品的光催化活性. 结果表明, Bi₂O₃纳米颗粒均匀地沉积在TiO₂纳米管中. Bi₂O₃/TiO₂纳米管阵列具有比纯Bi₂O₃膜和N-TiO₂纳米管阵列高得多的可见光催化活性. Bi₂O₃/TiO₂纳米管阵列活性的增强是其强可见光吸收和Bi₂O₃与TiO₂之间形成的异质结的协同作用的结果.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

原位碳、氮共掺杂二氧化钛空心球的制备与可见光光催化性能

在H₂O₂-HF 的乙醇-水混合溶液中, 通过水热处理碳氮化钛(TiCN)制备了碳、氮共掺杂TiO₂ 空心球(CNTH). 用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X 射线光电子能谱(XPS)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 在可见光(λ≥400 nm)照射下, 通过降解甲基蓝检测了碳、氮共掺杂TiO₂空心球的光催化活性. 结果表明, 源于TiCN中的部分碳和氮原子原位掺入了TiO₂的晶格中, 部分碳掺入TiO₂点阵的间隙中. 该材料在整个可见光区展示了增强的可见光吸收, 其带边明显红移. 光催化研究表明在强可见光吸收和独特的空心球结构的协同作用下, 碳、氮共掺杂TiO₂空心球展示了比P25更高的可见光光催化活性.     

Au-doped TiO2 nanoparticles for selective photocatalytic synthesis of quinaldines from anilines in ethanol

A convenient eco-friendly photocatalytic synthesis of quinaldines has been developed by a simple one-pot reaction of anilines in ethanol solution with Au-loaded TiO₂ under UV irradiation. Upon irradiation in the presence of Au-TiO₂, aniline and oxidation products derived from ethanol undergo condensation-cyclization to afford quinaldines.     

Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

光驱动多孔无定形TiO2的形成机制与光催化性能的研究

以钛酸正丁醇和乙二醇为原料,采用溶剂热法合成了钛乙二醇盐(TG)前躯体,在高压汞灯照射下制备出无定形TiO2。利用X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)、紫外-可见吸收光谱(UV-Vis)、表面光电压谱(SPS)、N2吸附-脱附对所得材料进行了结构和性能的表征。借助X射线吸收精细结构(XAFS)对无定形TiO2的形成机制进行了分析,并通过硝基苯的还原反应考察了材料的光催化性能。结果表明:在紫外光驱动无定形TiO2的形成过程中,中心元素Ti4+的配位环境发生变化,由八面体结构转变为四面体结构;由于特殊的孔道结构使得多孔无定形TiO2显示出较好的光催化活性。     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Ag掺杂型空心TiO2纳米微球的制备与表征及其光催化性能

通过甲基丙烯酸与苯乙烯的乳液聚合制备了表面载有阴离子的聚苯乙烯(PSt)纳米乳胶粒. 在乙醇与水的混合溶剂中, 用硅烷偶联剂乙烯基三甲氧基硅烷对其进行表面改性. 以此乳胶粒为模板, 加入钛酸四丁酯和硝酸银制备了Ag₂O掺杂型聚苯乙烯/二氧化钛(PSt/TiO₂)复合微球. 对该微球在180 °C进行液相预处理、干燥、500 °C煅烧等步骤制备了Ag 掺杂型Ag-TiO₂复合粒子. 通过扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)等手段对PSt/TiO₂复合粒子及Ag-TiO₂空心粒子的形貌及晶体结构等进行了表征. 考察了Ag-TiO₂复合粒子在紫外光(365 nm)与紫外-可见光(370-760 nm)下对罗丹明B (RhB)降解的催化活性. 结果表明, 与不含银的TiO₂空心微球相比, 在紫外光照射下, 银含量(n_Ag/n_Ti)为0.1%的Ag-TiO₂复合粒子对RhB的降解率提高了11%左右; 在紫外-可见光照射下, n_Ag/n_Ti为1.0%和2.0% 的Ag-TiO₂复合粒子对RhB的降解率提高了30%左右.     

Photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant on highly smooth and ordered TiO2 nanotube arrays

The photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant were achieved on TiO₂ nanotube electrodes with double purposes of environmental protection and renewable energy production under illumination of simulated solar light. The TiO₂ nanotube arrays (TiO₂ NTs) were fabricated by a two-step anodization method. The TiO₂ NTs prepared in two-step anodization process (2-step TiO₂ NTs) showed much better surface smoothness and tube orderliness than TiO₂ NTs prepared in one-step anodization process (1-step TiO₂ NTs). In the photoelectrochemical water splitting and simultaneous photoelectrocatalytic decomposition process, the 2-step TiO₂ NTs electrode showed both highest photo-conversion efficiency of 1.25% and effective photodecomposition efficiency with existing of methylene blue (MB) as sacrificial agent and as pollutant target. Those results implied that the highly ordered nanostructures provided direct pathway and uniform electric field distribution for effective charges transfer, as well as superior capabilities of light harvesting.     

p-Aminophenylacetic acid-mediated synthesis of monodispersed titanium oxide hybrid microspheres in ethanol solution

Monodispersed TiO₂ hybrid microspheres were prepared via the hydrolysis of titanium isopropoxide (TTIP) in ethanol solution containing p-aminophenylacetic acid (APA). The effects of the APA:TTIP molar ratio, water content, reaction time and reaction temperature on the morphology of the resultant spheres were investigated. The products were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. It was demonstrated that the diameters of the resultant TiO₂ spheres could be tuned in the range of 380–800 nm by changing the APA:TTIP molar ratio (1:3 to 3:1) and water content (1–3 v/v%) in the reaction medium, and that increasing the APA:TTIP molar ratio led to larger TiO₂ hybrid spheres while increasing the water content decreased their size. The loading content of APA in the hybrid spheres could reach 20 wt.% as they were prepared with the APA:TTIP ratio of 3:1. The possible formation mechanism of the hybrid spheres was also investigated. It was found that APA slowed down the hydrolysis rate of the titanium precursor so that resulted in the formation of the TiO₂ spheres. In addition, the APA present in TiO₂ spheres acted as a reducing agent to in situ convert HAuCl₄ into metallic Au on the surface of the TiO₂ spheres. The catalytic activity of the resultant Au/APA–TiO₂ composite was examined using transfer hydrogenation of phenylacetone with 2-propanol, and it was indicated that the catalyst displayed high efficiency for this reaction.     

Photocatalytic activities of C–N-doped TiO2 nanotube array/carbon nanorod composite

A C–N-doped TiO₂ nanotube (NT)/carbon nanorod composite is fabricated by chemical vapor deposition (CVD). Carbon nanorods are grown from the TiO₂ NTs, and partly graphitized, while TiO₂ is in the mixture of anatase and rutile. The C–N doping shifts the absorption edge of TiO₂ NTs to the visible light region; the formed carbon nanorods promote the charge carrier transfer from the TiO₂ surface to the electrolyte. Under the simulated solar light irradiation, the C–N-doped TiO₂ NTs show higher photocatalytic activity in the degradation of methyl orange (MO) than the undoped TiO₂ NTs.     

Biocompatibility and <Emphasis Type="Italic">in vitro</Emphasis> antineoplastic drug-loaded trial of titania nanotubes prepared by anodic oxidation of a pure titanium

TiO₂ nanotube (NT) arrays have been prepared by anodic oxidation of a Ti sheet, and carbon-deposited TiO₂ NT arrays have been prepared by annealing TiO₂ NT arrays in carbon atmosphere. The biocompatibility of the as-prepared NT arrays was investigated by observing the growth of osteosarcoma (MG-63) cells on the NT arrays. The application of the TiO₂ NT arrays as a drug delivery vehicle was investigated. Both the TiO₂ NTs and the carbon-modified TiO₂ NTs have good biocompatibility supporting the normal growth and adhesion of MG-63 cells with no need of extracellular matrix protein coating. The one end-opened TiO₂ NTs can be easily filled with drugs, working as an efficient drug delivery vehicle.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

Reaction of oxygen with adsorbed hydrogen species of a reduced Pt/TiO2 catalyst

Reaction of oxygen with the adsorbed hydrogen species of Pt/TiO₂ catalysts reduced in the temperature range of RT-773 K has been studied by temperature-programmed oxidation (TPO). It is obtained that the Pt-assisted reaction of oxygen with both the surface hydroxy groups and titanium hydride species occurs in the temperature range of 320–450 K; direct oxidation of the surface hydrogen species takes place on the surface of TiO₂ in the temperature range of 500–600 K; and oxygen reacts with the stored hydrogen species in the sublayer and bulk of the TiO₂ support when the temperature was increased to above 600 K.     

Photocatalytic degradation of trichloroethylene using N-doped TiO<Subscript>2</Subscript> prepared by a simple sol–gel process

Visible-light-driven N-doped TiO₂ was prepared by a simple sol–gel process using nitric acid not only as the acid catalyst of the sol–gel reaction but also as the source of nitrogen. The photocatalytic performance of the N-doped TiO₂ was investigated by using FTIR spectroscopy to monitor the degradation of trichloroethylene (TCE) during UV and visible irradiation. The photocatalytic degradation of TCE was well-reproduced several times. The activity of Ti–O–N species was supported experimentally. The N-doped TiO₂ was found to be responsive to visible light and was stable during repeated runs and maintained the nitrogen species and its activity for at least four months.     

Photocatalytic degradation of dichloroacetyl chloride adsorbed on TiO<Subscript>2</Subscript>

Dichloroacetyl chloride (DCAC) attracted our attention as an intermediate product of the photocatalytic degradation of trichloroethylene (TCE). The adsorption and photocatalytic reaction of DCAC on TiO₂ have been investigated by FTIR spectroscopy. The influence of the surface structure of several TiO₂s on the reaction mechanism was discussed in order to understand the complete degradation mechanism of TCE as well as DCAC. DCAC was transformed into dichloroacetic acid (DCAA) on the relatively hydrophobic TiO₂ surface by the small amount of the water molecules weakly adsorbed on the surface. This DCAA was degraded to phosgene, CO₂, and CO during UV irradiation. For the hydrophilic TiO₂, DCAC was mainly transformed into the dichloroacetate anion. UV irradiation allowed this species to produce chloroform in addition to phosgene, CO₂, and CO. It is suggested that DCAC easily reacts with the Ti–OH group on the hydrophilic TiO₂ and forms the bidentate titanium chelate of dichloroacetate, which efficiently degrades into chloroform.     

CdS‐Encapsulated TiO2 Nanotube Arrays Lidded with ZnO Nanorod Layers and Their Photoelectrocatalytic Applications

A novel TiO₂ nanotube array/CdS nanoparticle/ZnO nanorod (TiO₂ NT/CdS/ZnO NR) photocatalyst was constructed which exhibited a wide‐absorption (200–535 nm) response in the UV/Vis region and was applied for the photoelectrocatalytic (PEC) degradation of dye wastewater. This was achieved by chemically assembling CdS into the TiO₂ NTs and then constructing a ZnO NR layer on the TiO₂ NT/CdS surface. Scanning electron microscopy (SEM) results showed that a new structure had been obtained. The TiO₂ NTs looked like many “empty bottles” and the ZnO NR layer served as a big lid. Meanwhile the CdS NPs were encapsulated between them with good protection. After being sensitized by the CdS NPs, the absorption‐band edge of the obtained photocatalyst was obviously red‐shifted to the visible region, and the band gap was reduced from its original 3.20 eV to 2.32 eV. Photoelectric‐property tests indicated that the TiO₂ NT/CdS/ZnO NR material maintained a very high PEC activity in both the ultraviolet (UV) and the visible region. The maximum photoelectric conversion efficiencies of TiO₂ NT/CdS/ZnO NR were 31.8 and 5.98 % under UV light (365 nm) and visible light (420–800 nm), respectively. In the PEC oxidation, TiO₂ NT/CdS/ZnO NR exhibited a higher removal ability for methyl orange (MO) and a high stability. The kinetic constants were 1.77×10^?4 s^?1 under UV light, which was almost 5.9 and 2.6 times of those on pure TiO₂ NTs and TiO₂ NT/ZnO NR, and 2.5×10^?4 s^?1 under visible light, 2.4 times those on TiO₂ NT/CdS.     

Degradation of ofloxacin by UVA-LED/TiO<Subscript>2</Subscript> nanotube arrays photocatalytic fuel cells

The degradation of ofloxacin (OFX) at low concentration in aqueous solution by UVA-LED/TiO₂ nanotube arrays photocatalytic fuel cells (UVA-LED/TiO₂ NTs PFCs) was investigated. TiO₂ nanotube arrays (TiO₂ NTs) photoanode prepared by anodization-constituted anatase–rutile bicrystalline framework. The results indicated that the degradation efficiency of OFX by UVA-LED/TiO₂ NTs PFC was significantly enhanced by 14.3% compared with UVA-LED/TiO₂ NTs photocatalysis. The pH affected the degradation efficiency markedly; the highest degradation efficiency (95.0%) and the pseudo-first-order reaction rate constant k value (0.049 min^?1) were achieved in neutral condition (pH 7.0). The degradation efficiency increased with the increasing concentration of dissolved oxygen (DO) in the UVA-LED/TiO₂ NTs PFC. The main reactive species of OFX degradation are positive holes (h⁺) and superoxide ion radicals (O ₂ ^·? ) in a DO sufficient condition. Furthermore, the possible pathways of OFX degradation were proposed.     

石墨烯修饰Y型TiO_2纳米管光电极制备及其对氨氮催化氧化性能

采用三步阳极氧化法和一步循环伏安电沉积法制备了还原氧化石墨烯(rGO)修饰的Y型TiO_2纳米管(rGO/Y-TiO_2NTs)电极。通过场发射电子扫描显微镜(FESEM)、X射线能谱(EDS)、X射线衍射(XRD)、紫外可见漫反射光谱(UV-Vis DRS)及拉曼光谱(Raman)等对电极样品进行了表征。以rGO/Y-TiO_2NTs电极为光阳极,测试了不同循环伏安沉积圈数对电极光电流响应的影响,考察了在1.0 V偏压下电极对氨氮的光电催化氧化性能。结果表明,高度有序的Y-TiO_2NTs为锐钛矿型,具有大的比表面积,表面修饰平滑透明rGO薄膜后可显著提高其光电催化效率,沉积圈数为30时电极在30 min内对氨氮的光电催化氧化效率为95.9%。