Diaminobenzene as a Novel Reagent for Nitrite Assay in Environmental Samples: Evidence for Its Mechanistic Aspects

Abstract

o-Phenylenediamine has been used as a reagent to quantify nitrites/nitrates in a variety of sample matrices. The method is based on the cyclization reaction between o-phenylenediamine and nitrite in acid medium. The amine undergoes diazotization with nitrite in the presence of acid to form the diazonium ion, which subsequently cyclizes to yield yellowish orange benzotriazole at room temperature with an absorption maximum at 450 nm. The formed dye has been separated, purified, and characterized by IR, NMR, and spectroscopy techniques. The parameters of the reaction between amine and nitrite have been optimized. The effect of interfering ions on the determination of nitrites/nitrates has been described. The developed method has been applied for the determination of residual NO₂ gas present in the ambient air after fixing it as a nitrite ion using sodium arsenite as a trapping medium. The dye formed has been extracted into organic solvent to improve the detection limit during the measurement of low levels of ambient NO₂ in air. The method obeyed Beer's law in the concentration range 0–250 µg in aqueous medium and 0–50 µg in organic medium with molar absorptivity of 4.09 × 10⁴ L mol^?1 cm^?1 and 4.3 × 10⁴ L mol^?1 cm^?1 respectively. Nitrate is determined by reducing it to nitrite after passing through the copperized cadmium reductor column. The developed method has been applied to determine nitrite/nitrate levels in water, soil, and biological samples.     

Aminophenyl Benzimidazole as a New Reagent for the Estimation of NO2/Nitrite/Nitrate at Trace Level: Application to Environmental Samples

Abstract

A simple and sensitive spectrophotometric method for the determination of nitrogen dioxide in ambient air and nitrite/nitrate in water and soil samples has been developed. Nitrogen dioxide in air has been fixed as nitrite ion using alkaline sodium arsenite as absorbing medium. The method is based on the reaction of nitrite with aminophenyl benzimidazole in acid medium to form diazonium ion, which is coupled with N‐(1‐naphthyl)ethylenediamine dihydrochloride to form an azo dye with an absorption maximum at 555 nm in aqueous phase. The method obeys Beer's law in the concentration range 0–10 µg of nitrite in 25 ml solution. The molar absorptivity has been found to be 6.3×10⁴ l mol^?1 cm^?1. The dye can be extracted quantitatively into isoamyl alcohol under alkaline condition and the addition of methanolic hydrochloric acid restores the original dye colour. Beer's law is obeyed in the concentration range 0–2 µg of nitrite with a detection limit of 0.009 µg. The effect of interfering species has been studied and the developed method has been applied to determine trace levels of nitrogen dioxide in ambient air and the results have been compared with the standard method. It is also applied to measure the nitrite/nitrate levels of surface and ground water samples collected from lakes, tube wells as well as soil samples.     

Spectrophotometer Determination of Nitrite Using Salbutamol sulphate as a Reagent

Abstract

A simple spectrophotometric method for the trace determination of nitrite (NO^? ₂) is described. Nitrite is reacted with Salbutamal sulphate in acidic medium which gives a yellow colour in alkaline medium (?pH 7) and can be determined in the presence of several cations and anions. Beer's law is obeyed in the range of 1.8 to 27.6 ppm of nitrite with the molar absorptivity 1.8 × 10³ 1 × mole^?1 × cm^?1 at 4l0 nm. The proposed method can also be utilized for the determination of nitrate (NO^? ₃) after its reduction to nitrite. The method has been applied for the determination of various samples containing traces of nitrite.     

Determination of Nitrite by a New Spectrophotometric Method Using Safranin

Abstract

A spectrophotometric method was developed to determine nitrite using safranin as color reagent. The reaction between nitrite and safranin produces a safranin-HNO₂ species, which exhibits absorption peaks at 280, 349, 420(shoulder) and 610 nm. The peak at 610 nm was chosen as the analysis wavelength because nitrite ion and safranin do not present absorption bands in this region. The Lambert-Beer law was obeyed in the concentration range 7.0 × 10^?6 - 5.0 × 10^?5M. The effects of various ions on absorbance of the safranin-HNO₂ species were studied; the nitrite analysis can be performed without interference in the presence of the ions SCN^?, Br^?, CH₃COO^?, Cl^? (≤ 1.0 × 10^?3 M) and NO₃ ^? (< 1.0 × 10^?5 M). The SO₄ ⁼ does not interfere even at a concentration of 0.25M.     

Determination of nitrite in environmental waters by flow injection catalytic spectrophotometry

ABSTRACT

The flow injection catalytic spectrophotometry is proposed for the determination of nitrite based on the catalytic effect on the redox reaction between methylene blue and potassium bromate in acidic medium. The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of methylene blue at the maximum absorption wavelength of 664 nm. The method is characterised by low solvent consumption and easy automatic continuous analysis. It has higher sensitivity and lower detection limit. Experimental analysis conditions of the flow injection-catalytic photometry are optimised, and the best analysis conditions are: the concentration of the potassium bromate is 0.068 mol L^?1; the concentration of the phosphoric acid in oxidation liquid is 0.045 mol L^?1; the concentration of the methylene blue in colour-substrate solution is 2.4 mg L^?1, the volume of sample ring is 200 μL; the reaction coil is around 7 m in length; the inject time is 50 s and analysis time is 70 s. Under the optimal conditions, the linear range is from 10 to 500 μg L^?1 and the detection limit is 1 μg L^?1. The nitrate standard solution is continuously determined with a mass concentration of 300 μg L^?1. The RSD is determined to be 1.41% (n = 10). The nitrite in water samples, which were from the Half Acre pond, the Ink River and the Small West lake in a campus, was determined respectively by this method. A satisfactory standard addition recovery of 96.7%–103.9% was obtained.     

Kinetic Spectrophotometric Determination of Nitrite with Tropaeolin 00-Bromate System

A simple accurate kinetic spectrophotometric method was developed for the determination of nitrite based on its catalytic effect on the redox reaction between tropaeolin 00 and bromate in acid medium. Nitrite was determined by measuring the decrease in the absorbance of tropaeolin 00 at 530 nm by a fixed time method, after 30 s from the initiation of the reaction. The calibration graph was linear in the range 6–500 ng mL^?1 of nitrite and the detection limit was 2 ng mL^?1. The proposed method is selective and is useful for the determination of nitrite in drinking water samples.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

Spectrophotometric Determination of Nitrite in Water Samples with 4‐(1‐Methyl‐1‐Mesitylcyclobutane‐3‐yl)‐2‐Aminothiazole

Abstract

A simple, sensitive, and specific spectrophotometric method for the measurement of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. The azo dye, 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐(p‐N,N‐dimethylazobenzene)‐1,3‐thiazole was synthesized with the reaction of 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐aminothiazole and N,N‐dimethyl aniline in acidic medium. Obtained azo dye has been characterized by infrared (IR), ¹H nuclear magnetic resonance (NMR), and microanalysis methods. The dye shows an absorption maximum at 482 nm. The method is optimized for acid concentration, pH, amount of reagents required, time, and interfering species. All the determinations were carried out at this wavelength throughout the work. At an analytical wavelength of 482 nm, Beer's law is obeyed over the concentration range 0.05 to 2.00 µg nitrite per mL analyte. The molar absorptivity, Sandell's sensitivity, and relative standard deviation are 2.03×10⁴ L mol^?1 cm^?1±251.3 (95%), 2.28×10^?3 µg cm^?2, and 2.74% (n=10), respectively. The detection limit of the method is 0.012 µg ml^?1 of nitrite ion. The method was succesfully applied to the determination of nitrite in tap water and lake water.     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

Regeneration characteristics and kinetics of Fe2O3/lignite semi-coke hot gas desulfurizer at O2/N2 atmosphere

The Fe₂O₃/lignite semi-coke sorbent was prepared by co-precipitation method with assistance of ultrasonic irradiation and underwent 4 sulfidation–regeneration cycles with O₂/N₂ as regeneration gases. The fresh, sulfided, and regenerated sorbents were characterized using XRD, SEM, XPS, and BET technologies in this paper. The regeneration mechanism was also discussed. It was found that in the oxygen atmosphere, FeS in the sulfided sorbent reacted with oxygen to produce Fe₂O₃ and SO₂, the sulfate formed in regeneration process is easy to decompose at higher temperature. Regeneration kinetic studies were also performed at regeneration temperatures of 625–700 °C. It was found that the reaction order of regeneration with respect to O₂ is first order. The equivalent grain model can be effectively used to correlate with the experimental data. In the early stage of reaction (x < 65 %), the regeneration is controlled by the chemical reaction, while it is controlled by the diffusion through the product layer in the latter stage (x > 70 %). According to the model, the apparent activation energy and the corresponding frequency factor for two different stages are 14.73 kJ mol^?1 and 4.43 × 10^?2 m s^?1, 31.32 kJ mol^?1 and 5.77 × 10^?4 m² s^?1, respectively.     

Determination of nitrite and nitrate in Venice lagoon water by ion interaction reversed-phase liquid chromatography

Ion interaction reversed-phase liquid chromatography with octylammonium orthophosphate as the interacting reagent and a reversed-phase C₁₈ column was applied to the identification and determination of nitrite and nitrate in Venice lagoon water. Interference by the high chloride concentration was systematically studied and the results obtained with different column packings were compared. With spectrophotometric detection at 230 nm, nitrite at 0.005 mg 1^?1 can be detected and determined even in the presence of 0.70 M chloride. The dependence of the retention time of nitrite on the chloride concentration was studied for two reversed-phase columns with different packings. Concentrations of 0.30 ± 0.05 mg 1^?1 of nitrite and 0.20 ± 0.05 mg 1^?1 of nitrate were found in Venice lagoon water.     

Highly Sensitive Determination of Traces of Co(II) in Pharmaceutical and Urine Samples Using Kinetic–Spectrophotometric Method

Abstract

A high sensitive, accurate and simple kinetic method has been developed for determination of trace of Co(II) ions, based on its strongly catalytic effect in the reaction oxidation of disodium-6-hydroxy-5-[(4-sulfophenyl)azo]-2-naphtalenesulfonic acid (artificial color, Sunset Yellow FCF, E110 in text selected as SY) by hydrogen peroxide in borate buffer at pH of 9.5, by monitoring the rate of disappearance of SY. Reaction rate was monitored spectrophotometrically, at λ_max of the SY at 478.4 nm. The optimum operating conditions regarding reagents concentration and temperature were established. The tangent method was adopted for constructing the calibration curve, which was found to be linear over the concentration range 1.18–17.67 ng ml^?1 and 17.67–58.90 ng ml^?1 of Co(II). The limit of detection (3σ) is 0.15 ng ml^?1, and limit of quantification (10σ) is 0.5 ng ml^?1. The effects of the other ions on the reaction rate were determined for an assessment of the selectivity of the method. The developed kinetic procedure was successfully applied for the determination of Co(II) in pharmaceutical and urine samples. The unique features of this procedure are that the determination can be performed at room temperature, and the analysis time is short. The newly developed method is high sensitive, simple, inexpensive and efficient for use in the analysis of a large number of samples.     

Speciation Analysis of Osmium(VIII) and Osmium(IV) by UV‐VIS Spectrophotometry Using Quercetin as the Reagent

Abstract

The UV‐VIS spectrophotometric methods for the determination of Os(VIII) (as OsO₄) and Os(IV) (as OsCl₆ ^2? complex) in their mixtures were developed. Quercetin (Q), a flavonoid compound, was used as a chromogenic reagent. Both direct and derivative spectrophotometry can be employed for the determination of Os(VIII). The calculation of the first‐derivative spectrum of the examined mixture and the use of the signal at 285.1 nm allows reaching a better detection limit (0.01 µg mL^?1 Os) as compared with direct spectrophotometry (0.1 µg mL^?1 Os). Relative standard deviations of the results are in the range of 0.87%–4.65% and 0.45%–1.15% for direct and derivative mode, respectively. Selective redox reaction of OsO₄ with Q under the conditions used (0.05 M HCl, 1×10^?4 M Q, 15 min heating at 70°C) makes the basis of its determination in mixtures with the OsCl₆ ^2? complex. Quercetin does not react with the OsCl₆ ^2? complex. The signals of the OsCl₆ ^2? complex can be isolated from the examined mixtures by the calculation of the third‐order derivative spectra and the use of the values at 340.0 nm. The effectiveness of the reduction of OsO₄ in chloride solutions has been studied by the developed method.     

A Study on Liquid Hybrid Material for Waveguides—Synthesis and Property of PSQ‐Ls for Waveguides

Silicate‐based inorganic‐organic hybrid polymer systems have many unique properties including thermal stability and photo‐stability, chemical resistance with the combination of tunable optical properties. Two kinds of new UV‐patternable hybrid materials PSQ‐Ls were synthesized by a sol‐gel process at room temperature, which can be used for low cost fabrication of optical waveguides. Thick films (up to 8.31 µm) can be coated by a single spin‐coating process without any cracking and the average surface roughness (Ra), detected by atomic force microscopy (AFM), is below 0.5 nm. The optical properties (refractive index, birefringence, and optical loss at 1310 nm and 1550 nm, respectively) of the PSQ‐Ls films are investigated by a prism coupler. The refractive index of PSQ‐Ls can be exactly tuned from 1.4483 to 1.5212 by blending PSQ‐LH (n_TE=1.5212 @ 1310 nm) and PSQ‐LL (n_TE=1.4483 @ 1310 nm). The maximum refractive index contrast is about 4.8%. After post‐baking, birefringences of the films are below 0.0005 and optical losses are about 0.2 dB · cm^?1 at 1310 nm, 0.7 dB · cm^?1 at 1550 nm, respectively. Furthermore, the PSQ‐Ls films also show outstanding thermal stability in air atmospheres.     

Rapid Analysis of Nitrate and Nitrite by Ion-Interaction Chromatography on a Monolithic Column

Ion-interaction chromatography with direct conductivity detection has been used for analysis of nitrate and nitrite. Chromatographic separation was performed on a monolithic silica-based C₁₈ column dynamically modified with tetrabutylammonium (TBA⁺). Using the optimized mobile phase, containing 2.0 mmol L^?1 TBA⁺ and 0.8 mmol L^?1 citrate (pH 6.0), delivered at a flow rate of 6.0 mL min^?1, separation of five anions (chloride, nitrite, bromide, nitrate, and sulfate) was achieved in only 40 s at a column temperature of 30 °C. The detection limits for nitrate and nitrite were 0.74 and 0.92 mg L^?1, respectively. The relative standard deviation (RSD, n = 5) of the retention times of nitrate and nitrite was 0.1% and RSD of chromatographic peak areas were 0.4 and 0.2%, respectively. The method was successfully used for analysis of the anions in groundwater. Recovery of nitrate and nitrite was 99.1 and 105%, respectively.     

Porous microsphere of magnesium oxide as an effective sorbent for removal of volatile iodine from off-gas stream

Porous microspheres of magnesium oxide were synthesized by calcination of precursor obtained via hydrothermal method. A sample of microsphere was characterized by transmission electron microscopy, scanning electron microscopy–energy dispersion spectroscopy, X-ray diffraction, thermogravimetric analysis, N₂ adsorption–desorption isotherms, and BET surface area. The average pore size and surface area of the microsphere were found to be 9.0 nm and 83.1 m² g^?1, respectively. The performance of sorbent was investigated in a continuous adsorption system. Iodine adsorption on sorbent was studied by varying temperature of adsorption column, sorbent calcination temperature and initial concentration of iodine. The capacity of sorbent increased by ~25 % when calcination temperature was raised from 350 to 500 °C. The maximum iodine adsorption capacity of sorbent was found to be 196 mg g^?1 using Langmuir isotherm. These results indicate the microspherical form of MgO to be effective sorbent to capture iodine vapor from off-gas stream.     

Postcolumn Iodine–Azide Reaction as a Detection System in HPLC for the Determination of Methylthiouracil in Urine

Abstract

This article describes a system for determining methylthiouracil in urine based on the sensitizing induction of methylthiouracil on the reaction between iodine and azide ions and combined techniques of high-performance liquid chromatography and simple postcolumn detection. The optimal conditions for iodine–azide reaction and high-performance liquid chromatographic separation were determined. The reproducibility, linearity, and recovery were evaluated under the optimal conditions. The methylthiouracil standards added to normal urine show that the response of the detector, set at 350 nm (corresponding to unreacted iodine in the postcolumn iodine–azide reaction), is linear within the concentration range of 0.4–5.0 nmol mL^?1 urine. The relative standard deviation values for precision and recovery within the calibration range varied from 0.9 to 4.8% and from 94 to 105%, respectively. Limits of detection (LOD) and quantitation (LOQ) were 0.3 and 0.4 nmol mL^?1 urine, respectively.     

A Dip‐and‐Read Test Strip for the Determination of Nitrite in Food Samples for the Field Screening

Abstract

A new test strip method for field screening of nitrite in aqueous samples based on the diazo‐coupling reaction between the nitrite and the Griess reagents has been developed. The test strip has a circular sensing zone that contains two layers: the Griess reagents act as the sensing reagent and is immobilized in the bottom layer; the top layer is a cellulose acetate membrane that can be used as a dialysis membrane to remove the matrix from the sample, which can enhance the selectivity of this method. When the test strip was directly dipped into the samples, a color change of the test strip was observed, and the intensity of color that appears on the test strip is proportional to the concentration of nitrite in the range from 0.50 to 25 µg mL^?1 in food samples. Under the experimental conditions, as low as 0.20 µg mL^?1 nitrite can be observed; most of anionic and cationic species as well as other sample matrixes basically do not interfere with the nitrite measurement.     

Flow Injection Analysis Spectrophotometric Determination of Platinum

Abstract

A new, simple, rapid, and selective procedure for the flow injection analysis (FIA) spectrophotometric determination of platement (Pt) is described. The method is based on the color reaction of Pt(IV) with SnCl₂ in the HCl medium. The mixed surfactants, i.e., cetylpyridinium chloride (CPC)+triton X‐100 (TX‐100) are used to enhance sensitivity of the method. The value of apparent molar absorptivity in the term of Pt is (3.00)×10³ L mol^?1 cm^?1 at absorption maximum, 405 nm. The detection limit (causing absorbance greater than 3×std. dev.) of the method is 150 ng/mL^?1. The optimum concentration range for the determination of Pt is 0.5–18 µg/mL^?1 with slope, intercept and correlation coefficient 0.0086, ?0.001, and +0.99, respectively. The sample throughput of the method is 120 samples/h^?1 at the flow rate of 3.7 mL/min^?1. The composition of the complex, and the reaction mechanism involved are discussed. The effect of FIA and analytical variables on the determination of the metal is optimized. The method has been tested for the analysis of Pt to the catalytic materials.     

Discotic derivatives of 6-oxoverdazyl radical

Substitution of each phenyl in 1,3,5-triphenyl-6-oxoverdazyl with three alkoxy groups induces an ordered columnar hexagonal phase (Col_h(o)) below 130°C in 1b[n], while in the alkylsulfanyl analogues 1a[n] additional periodicity along the columns was found rendering the phase a true three-dimensional columnar hexagonal phase (Col_h(3D)) below 60°C. Both series exhibit broad absorption bands in the visible region with maxima at 540 and 610 nm in series 1a[n] and at 486 and 614 nm in series 1b[n]. Unusual reversible thermochromism is observed in series 1b[n], in which the dark green isotropic phase turns red in the discotic phase. Analysis of 1a[8] revealed redox potentials E^0/+1_1/2 = +0.99 V and E^{0/ ?1}_1/2 = –0.45 V vs. saturated calomel electrode (SCE), while the potentials in the alkoxy analogue 1b[8] are shifted cathodically by 0.16 V. Photovoltaic studies of 1a[8] demonstrated hole mobility of μ_h = 1.52 × 10^?3 cm² V^?1 s^?1 in the mesophase with an activation energy E_a = 0.06 ± 0.01 eV. Magnetisation studies of 1a[8] revealed nearly ideal paramagnetic behaviour in either the solid or fluid phase above 200 K and weak antiferromagnetic interactions at low temperatures. In contrast, a noticeable drop of about 4% in μ_eff was observed during the I→Col phase transition in 1b[8], which coincide with the thermochromic effect.