Study on the Fluorescence System of Oxolinic Acid‐Tb(III) and the Determination of Oxolinic Acid

Abstract

In Tris‐HCl buffer (pH=7.43), Tb³⁺ can react with oxolinic acid (OA) and form a 1:2 complex, which emits the intrinsic fluorescence of Tb³⁺. Based on this, a new fluorimetric method of determination of OA is developed. Under the optimum conditions, the enhanced fluorescence intensity of the system is proportional to the concentration of OA in the range of 1.5×10^?7～2.5×10^?5mol/L, and the detection limit is 5.5×10^?9 mol/L. Recovery test was also satisfactory. The experiments indicated that the luminescence mechanism was attributed to the M*–M luminescence.     

Study on the Fluorescence System of Tb-ATP-Phen for the Determination of ATP

Abstract

It was found that ATP could form a ternary complex with Tb³⁺ and Phen, which can emit the characteristic fluorescence of Tb³⁺. The experiment showed that the fluorescence intensity of the system was maxmium in the following conditions: pH of the solution is 7.2, the concentrations of Tb³⁺ and phenanthroline (Phen) are 2.0×10^-5mol.L^-1 and 2.0 × 10^-4mol.L^-1, respectively. At the optimum conditions, a linear relationship is obtained between the fluorescence intensity and ATP concentration in the range of 1.0×10^-6—1.0×10^-5mol.L^-1.

Traces of ATP in drugs (ATP disodium salt tablets) can be determined using the standard addition method. The luminescence mechanism of the system was discussed.     

Potentiometric Dipyridamole Sensors Based on Lipophilic Ion Pair Complexes and Native Ionic Polymer Membranes

Abstract

A new spectrofluorimetric method was developed for the determination of trace amounts of lecithin. Using enoxacine (ENX)‐terbium ion (Tb³⁺) as a fluorescent probe, in a buffer solution at pH=5.80, lecithin can remarkably reduce the fluorescence intensity of the ENX‐Tb³⁺ complex at λ=545 nm; the reduced fluorescence intensity of the Tb³⁺ ion is proportional to the concentration of lecithin. Optimum conditions for the determination of lecithin were also investigated. The linear range and detection limit for the determination of lecithin were 1.96×10^?7–9.8×10^?6 mol l^?1 and 9.74×10^?8 mol l^?1. This method is simple, practical and relatively free of interference from coexisting substances, and can be successfully applied to assess lecithin in serum samples.     

Spectrofluorimetric method for the determination of uric acid in human serum

A new spectrofluorimetric method is described for the determination of uric acid (UA), that can remarkably reduce the fluorescence intensity of the enoxacin (ENX)-terbium ion (Tb³⁺) complex at 545 nm. The reduced fluorescence intensity of Tb³⁺ ion at pH 5.7 is proportional to the concentration of UA. Optimum conditions for the determination of UA have been investigated. The linear range and detection limit for the determination of UA are 6.0 × 10^?7–3.0 × 10^?5 M and 1 × 10^?7 M, respectively. The relative standard deviation (RSD) was 0.4% for 6 × 10^?6 M UA (n = 11). The method is simple, practical and relatively free of interferences. It has been successfully applied to assess UA in serum at the level of 3 × 10^?4 M with an RSD of 5–7% (n = 3). The results were evaluated by comparison with a common clinical spectrophotometric method using phosphotungstic acid as developer.     

Tb3+ PVC-Membrane Electrode Based on 2-{2-(2-Anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazine Carbothioamide

Abstract

The polyvinyl chloride (PVC) membrane containing 2-{2-(2-anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazinecarbothioamide (AHC) as a suitable iophore exhibits a Nernstian response for Tb³⁺ ions over a wide concentration range (1.0 × 10^?6 to 1.0 × 10^?2 M) with a slope of 19.6 ± 0.3 mV per decade and a limit of detection of 6.8 × 10^?7 M in the pH range 3.5–8.5. The proposed sensor revealed very good selectivities (expect for the Pr³⁺ and Ho³⁺ ions) for a wide variety of other metal ions. The practical utility of the electrodes has been demonstrated by its use for the determination of Tb³⁺ in different solutions.     

Sensitive Determination of Prulifloxacin by Its Fluorescence Enhancement on Terbium(III)–Sodium Dodecylbenzene Sulfonate System

Abstract

A terbium-sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of prulifloxacin (PUFX). It was found that SDBS significantly enhanced the fluorescence intensity of the PUFX–Tb³⁺ complex (about 13-fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 290 nm and 545 nm, pH 8.0, 4.0 × 10^?5 mol L^?1 terbium(III), and 4.0 × 10^?4 mol L^?1 SDBS. The enhanced fluorescence intensity of the system (ΔF) showed a good linear relationship with the concentration of PUFX over the range 6.0 × 10^?8 to 2.0 × 10^?6mol L^?1 with a correlation coefficient of 0.9991. The detection limit (S/N = 3) was determined as 8.5 × 10^?9 mol L^?1. This method has been successfully applied for the determination of PUFX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range, and good stability. The luminescence mechanism of the system was also discussed in detail. In the fluorescence system of PUFX–Tb³⁺–SDBS, SDBS acted not only as the surfactant but also as the energy donor.     

Photochemical Fluorescence Enhancement of Terbuium-Fleroxacin System and Determination of Fleroxacin

ABSTRACT

The sensitized fluorescence of the terbium ion (Tb³⁺) can be observed when excited in the presence of fleroxacin (FLRX) in the aqueous solution because a Tb³⁺ -FLRX complex was formed. The sensitised fluorescence was greatly enhanced after the complex system was irradiated by 365nm ultraviolet light. The irradiation makes the complex system undergo photochemical reactions and a new terbium complex which is more favourable to the intramolecular energy transfer is formed. On this basis a new sensitive and selective photochemical fluorimetric method for the determination of FLRX was developed. Under the optimum experimental conditions, the linear range of the determination is 1.0—200×10^?7 mol 1^?1 for FLRX, and the detection limit is 1.2×10^?8mol 1^?1. Without any pre-treatment the recoveries of FLRX in human urine samples were determined with satisfaction.     

Fluorescence enhancement by gadolinium of the europium or samarium-dibenzoylmethane-diethylamine system

A fluorescence enhancement produced by adding Gd³⁺, Y³⁺, Tb³⁺, La³⁺ or Lu³⁺ to europium or samarium-dibenzoylmethane-diethylamine was observed. Gd³⁺ enhanced the fluorescence intensity by 2–3 orders of magnitude compared with the system without Gd³⁺. The new system was used for the simultaneous determination of traces of Sm³⁺ and Eu³⁺ in the ranges 1.0 × 10^?9?8.0 × 10^?8 M and 1.0 × 10^?11?4.0 × 10^?9 M, respectively, and the detection limits were 5 × 10^?13 M for Sm³⁺ and 8 × 10^?14 M for Eu³⁺. The luminescence mechanism of the system is discussed.     

八肋游仆虫中心蛋白N-端半分子与Tb3+，Ca2+的结合

用分子生物学方法表达、纯化了游仆虫中心蛋白及N-端半分子，用铽荧光探针法、离子竞争法研究了pH 7.4，0.01 mol· L^-1 Hepes条件下中心蛋白与铽、钙的结合性质。结果表明中心蛋白有4个铽结合部位，其中2个为高亲合结合部位、2个为低亲合结合部位。具有2个低亲合结合部位的中心蛋白半分子与铽结合的条件常数是(2.13±0.10)×10⁵ L·mol^-1，与钙结合的条件常数是(7.52±0.02)×10² L·mol^-1。     

A biacylhydrazone-based chemosensor for fluorescence ‘turn-on’ detection of Al3+ with high selectivity and sensitivity

A simple Al³⁺ fluorescent chemosensor (1) based on diacylhydrazone has been designed and synthesized by the condensation reaction of 2-hydroxy naphthaldehyde and metaphthalic hydrazide. The chemosensor 1 displays a specific and sensitive response to Al³⁺ over other cations in DMSO solution. Upon the addition of DMSO solution of Al³⁺, the sensor 1 shows an immediate fluorescence ‘turn-on’ response and emitting strong blue emission with visible color change from colorless to green. The fluorescence quantum yield enhanced from 7.24% to 48.68%. Meanwhile, the fluorescence and UV absorption spectra detection limits of the chemosensor 1 for Al³⁺ were 2.0 × 10^?7 M and 5.6 × 10^?7 M respectively, indicating the high sensitivity of 1 to Al³⁺. Furthermore, test strips based on 1 were fabricated, which could be used as a convenient test kit for the detection of Al³⁺ and an efficient Al³⁺ controlled fluorescent security display materials.     

Study on the co-luminescence system Sm-Gd-BPMPHD-CTMAB and its analytical application

It has been found that the Sm-BPMPHD-CTMAB ion association system shows a strong fluorescence intensity. In this system some rare earth ions, such as Lu³⁺, Y³⁺, Gd³⁺ and Tb³⁺, exert an evident fluorescence enhancement effect. The formation conditions of the system and the factors affecting the columinescence effect were studied in detail in order to determine trace amounts of Sm³⁺. Under optimum conditions a linear relationship was obtained between the fluorescence intensity and the Sm³⁺ concentration in the range of 5.0×10^?8–8.0×10^?6 mol·L^?1. The detection limit of Sm³⁺ was 2.0×10^?8 mol·L^?1. The determination gave satisfactory results.     

Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Enhanced fluorescence of 3-tryptimino-1-phenyl-butan-1-one–Tb with 1,10-phenanthroline ternary system, and its analytical application

A new Schiff base ligand, 3-tryptimino-1-phenyl-butan-1-one (TPB), was synthesized. The fluorescence intensity of its terbium(III) complex was greatly enhanced by addition of 1,10-phenanthroline to an acetonitrile solution. Spectrofluorimetric determination of trace amounts of Tb³⁺ was performed based on this effect. The excitation and emission wavelengths are 293 and 546 nm, respectively. Under optimal conditions, the fluorescence intensities varied linearly with the concentration of Tb³⁺ in the range of 2.0 × 10⁻⁶ to 7.0 × 10⁻⁶ M with a detection limit of 2.4 × 10⁻⁹ M. Interference by some rare earth ions is described. This method was applied to the determination of trace amounts of terbium(III) in a high purity Y₂O₃ matrix. The mechanism of fluorescence enhancement was also studied.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.     

Electronic excitation energy transfer between Tb3+ and Eu3+ in DMSO

Excitation of Tb³⁺ and Eu³⁺ in DMSO with 487 mμ, which corresponds to the ⁷F₆ → ⁵D₄ transition of Tb³⁺, is accompanied by a reduction in the fluorescence efficiency of Tb³⁺ as [Eu³⁺] increases and by the appearance of a weak emission from Eu³⁺. An average rate constant for both the fluorescence quenching of Tb³⁺ and the energy transfer from Tb³⁺ to Eu³⁺ with subsequent emission from the latter, was found to be (2.2 ± 0.4) × 10³ M^?1 sec^?1.     

Imidazo[1,2-a]pyridine-substituted coumarin as a selective ratiometric sensor for Cu2+ ion

A novel fluorescent chemosensor, (E)-7-(diethylamino)-3-((2-phenylimidazo[1,2-a]pyridin-3-ylimino)methyl)-2H-chromen-2-one 1a, has been synthesised and characterised. This chemosensor displayed an extreme selective fluorescence emission only with Cu²⁺ ion over all other metal ions examined. The Job’s plot experiment analysis suggested the binding ratio of the chemosensor 1a with Cu²⁺ was 1:1 metal-to-ligand ratio. The association constant for Cu²⁺ towards receptor 1a obtained from Benesi–Hildebrand plot was found to be 4.859 × 10³ M^?1 with a detection limit 4.6 × 10^?8 M. Fluorescence enhancement caused by Cu²⁺ binding with chemosensor 1a attributed to combinational effect of intramolecular charge transfer and chelation-enhanced fluorescence occurred at pH 8.0.     

A Selective Fluorimetric Method for the Determination of Some β-Lactamic AntibioticsSupported by Natural Science Foundations of China and Shandong province

Abstract

Based on the reaction between acetylacetone-formaldehyde and β-lactamic antibiotics at pH=4.0, in which product can emit strong fluorescence, a selective simple fluorimetric method is described for the determination of both α-aminocephalosporins (namely cepharadine and cefalexin) and 6-aminopenicillanic acid (6-APA) in pure form and in pharmaceutical form. Other β-lactamic antibiotics free from α-amino group do not interfere with the assay. The linear ranges are 1.0×10^?4-8.0×10^?2 mg/ml, 2.0×10^?4-3.0×10^?2 mg/ml and 3.0×10^?4-2.0×10^?2mg/ml for cepharadine, cefalexin and 6-APA, respectively. Their detection limits (S/N=3) are 3.0×10^?5mg/ml, 4.0×10^?5mg/ml and 6.0×10^?5mg/ml.     

Terbium(III) Ion-Selective Electrochemical Sensor Based on Hematoporphyrin

Abstract

A polyvinyl chloride (PVC) based membrane sensor for terbium ions was prepared by employing Hematoporphyrin (HP) as an ionophore. The sensor revealed a very good selectivity (expect for the Fe³⁺ion) with respect to common alkali, alkaline earth and heavy metal ions. The plasticized membrane electrode exhibits a Nernstian response for Tb³⁺ ions over a wide concentration range (1.0 × 10^?6 ? 1.0 × 10^?2 M) with a slope of 19.8±0.3 mV per decade and low detection limit of 7.4 × 10^?7 M. The developed sensor was used in determination of F^? in mouth wash preparation sample.     

Enhanced Luminescence of Europium by Gadolinium and Its Application

Abstract

The fluorescence enhancement of the Eu-dibenzoylmethane(DBM)- cetylpyridinium-chloride (CPC) system was studied. The fluorescence intensity of the system can be greatly increased by Gd³⁺ in the presence of triethanolamine(TEA). The optimum conditions for enhanced fluorescence of the Eu-Gd-DBM-CPC system were examined. It was a linear function of the Eu³⁺ concentration in the range of 1.0×10^?10～1.0×10^?8 mol dm^?3 under the optimized conditions. The detection limit was 2.6 × 10¹¹ mol dm^?3 in an aqueous solution at pH=7.5～9.5.

The Eu-Gd-DBM-CPC system was applied to the determination of europium in rare earth oxides with satisfactory results. The mechanism of enhanced fluorescence was discussed.     

Rapid Method for the Micro-Determination of Hydrazine by Amperometric Titration With Potassium Iodate

Abstract

An amperometric method, with potassium iodate as the titrant, for the rapid and precise determination of micro amounts of hydrazine salts is described. Hydrazine dihydrochloride, hydrazine sulfate and hydrazine hydrate could be quantitatively analyzed at the concentration range of 4 × 10^?7 -4×10^?3 M in the presence of 5 M hydrochloric acid. Hydrazine salts, 2×10^?4 -4×10^?3 M, were titrated in 5 minutes with a relative error and a relative standard deviation of 0.1%. It was also found that hydrazine dihydrochloride can be precisely determined, without any interference, even in the presence of hydroxylamine which is ten times as much as the former.

The suitable applied potential between the rotating platinum indicator microelectrode and the silver plate-silver chloride reference electrode was + 0.7V.