Spectrophotometric Determination of Cefadroxil and Metyrosine in Dosage Forms

Abstract

A simple and sensitive spectrophotometric method is described for the determination of cefadroxil and metyrosine in pure form and in pharmaceutical formulations. The method is based on reacting these drugs with 4-aminoantipyrine (AAP) in the presence of an alkaline oxidising agent. The coloured products were measured spectrophotometrically at 500 nm and 470 nm for cefadroxil and metyrosine, respectively. Beer's law was obeyed over the concentration range 1-28 and 2-44 μg ml^-1 for cefadroxil monohydrate and metyrosine, respectively. The molar ratio in both cases was established and a proposal for the reaction pathway was suggested. The percentage recoveries obtained were in accordance with those given by the reference methods.     

High-Pressure Liquid Chrohatographic Assay of Cefotaxime and Desacetylcefotaxime in Human Myometrium

Abstract

An analytic high-pressure liquid chromatographic (HPLC) procedure for the assay of desacetylcefotaxime and cefotaxime in gynecologic tissue was developed. Normal individuals undergoing elective hysterectomy were subjects in this study. Blood and myometrium were removed up to four hours after a 1-g intramuscular dose of cefotaxime. Since cefotaxime is unstable in homogenized tissue at room temperature, the specimens must be maintained at 4°C during homogenization and extraction. Mean serum desacetylcefotaxime and cefotaxime levels were 3.2 ± 2.0 μg/ml and 6.8 ± 4.4 μ/ml, respectively. The mean myometrium concentrations of desacetylcefotaxime and cefotaxime were 8.4 ± 10.0 μg/g and 6.3 ± 8.9 μg/g, respectively. The cefotaxime to desacetylcefotaxime ratios in serum and tissue were 2.12 and 0.75, respectively. Our results suggest that in antimicrobial synergistic studies evaluating serum and tissue levels, the optimal ratio of one part cefotaxime to at least one part desacetylcefotaxime.     

Spectrophotometric Determination of Trimethoprim in Pure Form and in Pharmaceutical Preparations using Bromothymol Blue,Bromocresol Green and Alizarin Red S

ABSTRACT

Simple, sensitive and selective methods for the determination of trimethoprim (TMP) in pure form and in pharmaceutical formulations are described. The methods are based on the reaction of TMP as a π-electron donor with bromothymol blue (BTB), bromocresol green (BCG) and alizarin red S (ARS) as electron acceptors. The coloured products are quantified spectrophotometrically at their corresponding λ_max.

Beer's law is obeyed in case of BTB in the range 2.9-23.2 μg/ml (CHCl₃), 2.9-20.0 μg/ml (CH₂Cl₂) and 5.0-29.0 μg/ml (ClC₆H₅), in the case of BCG 2.9-27.5 μg/ml (H₂O/alc.), 2.9-18.3 μg/ml (CHCl₃) and 2.9-20.3 μg/ml (CH₂Cl₂) and for ARS in the range 3.0-12.0 μg/ml in H₂O/alc medium.

The specific absorptivities, molar absorptivities, Sandell sensitivities, standard deviations and percent recoveries are evaluated. Application of the suggested methods to dosage forms is presented and compared with the pharmacopoeial method. The interference from additives and sulfa compounds, especially sulfamethoxazole, has been overcome by extraction into chloroform or methylene chloride.     

Spectrophotometric Determination of Chlorzoxazone in pure State and Formulations Through Oxidative Coupling of its Hydrolysis Product

ABSTRACT

Three simple and sensitive procedures (Methods A, B and C) for the assay of chlorzoxazone (CZZ) in pure form and in formulations are described. The methods are based on the oxidative coupling reaction of the hydrolysis product of chlorzoxazone (HCZZ) with 3-methyl-2-benzothiazolinone hydrazone (MBTH) in the presence of Fe (III) (Method A, λ_max 445 nm), N, N-dimethyl-p-phenylene diamine (DMPD) in the presence of periodate (IO₄) (method B, λ_max 605 nm) and 2, 6-dichloroquinone chlorimide (DCQC) (Method C, λ, _max 560 nm). The Beer's law limits were found to be 5.0 to 25.0 μg/ml in the case of methods A and B and 2.0 to 12.0 μg/ml in the case of method C. The results are statistically validated and the reactions involved are presented.     

Indirect Determination of Sodium Cefotaxime with N‐Propyl Alcohol‐Ammonium Sulfate‐Water System by Extraction‐Flotation of Cuprous Thiocyanate

A novel method for the indirect determination of sodium cefotaxime by the extraction‐flotation of cuprous thiocyanate is described in this paper. The experiment indicated that the degradation of sodium cefotaxime took place in the presence of 0.20 M sodium hydroxide in a boiling water bath for 40 min. At pH 4.0, the thiol group (‐SH) of the degradation product of sodium cefotaxime could reduce Cu(II) to Cu(I) for the formation of the emulsion CuSCN precipitation in the presence of ammonium thiocyanate. By determining the residual amount of Cu(II) in the solution and calculating the flotation yield of CuSCN, the indirect determination of sodium cefotaxime can be achieved. When the concentration of Cu(II) was 5.0 μg mL^?1, a good linear relationship was obtained between the flotation yield of CuSCN and the amount of sodium cefotaxime in the range of 0.50～20 μg mL^?1. The linear equation is E = 1.329 + 2.654C with a correlation coefficient r = 0.9988. The detection limit of sodium cefotaxime of this proposed method evaluated by calibration curve (3σ/k) was found to be 0.39 μg mL^?1. Every parameter has been optimized and the reaction mechanism has been studied. This method has been successfully applied to the determination of sodium cefotaxime in pharmaceutical formulations, human serum, and urine samples, respectively. Analytical results obtained with this novel method are satisfactory.     

Simultaneous Analysis of Pyridoxine and Melatonin in Tablet Formulation by Derivative Ultraviolet Spectroscopy

Abstract

A method for simultaneous analysis of pyridoxine and melatonin by second and third derivative UV - spectroscopy, the “zero - crossing” technique, is described. The determination has been carried out in 0.1 mol dm^?3 hydrochloric acid solution and the concentration range of 2 – 10 μg/ml pyridoxine and 0.5 – 3.5 μg/ml melatonin. Lower limits of detection at the 95% confidence level were 0.26 μg/ml for pyridoxine and 0.05μg/ml for melatonin The advantages of the proposed method include its application for the assay and in-vitro dissolution studies of pyridoxine and melatonin from two different tablet formulations.     

Fluorigenic Derivatization of Oxazepam. Application to Its Determination in Pharmaceuticals

Abstract

Oxazepam, when heated in mixtures of acetic acid and methanol, undergoes a reaction giving an intense fluorescence at excitation and emission wavelengths of 364 and 469 nm, respectively. The best reaction conditions were a 7:25 methanol:acetic acid volume ratio, a temperature of 100 °C (examinated range 50–100 °C), and a reaction time of 5 minutes. A linear range from 0.025 to 50 μg/ml with a limit of detection of 0.014 μg/ml and a reproducibility within day of less than 5% were attained. A Flow Injection Analysis method was designed and a linear range from 0.1 to 100 μg/ml with a limit of detection of 0.035 μg/ml and a reproducibility within day of less than 5% were obtained. These methods were applied to the determination of oxazepam in five pharmaceutical formulations.     

Simultaneous Determination of Tinidazole and Furazolidone in Suspension by HPTLC and HPLC

Abstract

High performance thin layer chromatographic (HPTLC) and high performance liquid chromatographic (HPLC) methods were developed for the simultaneous determination of Tinidazole and Furazolidone in suspension.

In the HPTLC method the separation of Tinidazole and Furazolidone was carried out on silica gel 60F₂₅₄ HPTLC glass plate using chloroform:methanol:ammonia (9:1:0.1 v/v) as a mobile phase. Rf values obtained were 0.63 and 0.79 for Furazolidone and Tinidazole respectively. Densitometric evaluation was done at 335 nm. Linearity was obtained within the concentration range 10–50 μg/ml and 3.5–17.5 μg/ml for Tinidazole and Furazolidone respectively.

The second method is based on high performance liquid chromatography on a reversed phase column (μ Bondapak C₁₈) using a mobile phase comprised of water: acetonitrile: triethylamine (80:20:0.1 v/v) adjusted to pH = 3.0 with dil. phosphoric acid. Retention times were 5.24 and 7.82 min for Tinidazole and Furazolidone respectively at a flow rate of 1.5 ml/min. Detection was done at 335 nm. Linearity was obtained within the concentration range 30–180 μg/ml and 10.5–63 μg/ml for Tinidazole and Furazolidone resp.     

A Validated Ion-Pairing High Performance Liquid Chromatographic Method for the Determination of Enoxacin and its Metabolite Oxo-Enoxacin in Plasma and Urine

Abstract

A rapid, sensitive, and specific determination of enoxacin and its principal metabolite, oxo-enoxacin, in plasma and urine is described. the method, which employs the structurally related compound ciprof loxac in as internal standard, involves a protein precipitation step for plasma and solid-phase extraction for urine. Liquid chromatographic analysis is carried out on a C-18 bonded silica column; the mobile phase consists of 0.1 M citric-acid/acetonitrile employing ammonium perchlorate and tetrabutyl-ammonium hydroxide as ion-pairing agents. Quantitation is performed by UV-detection at 340 nm.

The analytical method was validated by examining the performance characteristics specificity, linearity, precision, accuracy, sensitivity, and recovery. Enoxacin calibration curves were linear between 0.02 and 3.2 μg/ml of plasma and from 0.5 to 125 μg/ml of urine. Limits of quantitation in plasma and urine were 0.01 and 0.5 μg/ml, respectively. For oxo-enoxacin, linear of calibration curves were obtained i n the range 0.05 to 1.6 μg/ml (plasma) and 1 to 50 μg/ml (urine); the respective quantitation limits were approximately 0.02 and 1 μg/ml.

The present assay procedure has been applied to monitoring plasma and urine concentrations in several pharmacokinetic studies in humans and different animal species.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Spectrophotometric Determination of Cephalosporins in Pure Form and in Pharmaceutical Preparations

Abstract

A spectrophotometric determination is described for cephalosporins, offering adequate sensitivity and good precision. The procedure applies successfully to a wide variety of cephalosporins, also in pharmaceutical preparations: cephalothin, cefacetrile, cephapirin, cefotaxime, ceftizoxime, cephaloridine, cefazolin, cefamandole nafate, cephalexin, cefadroxil, cefoxitin and cefuroxime. The method employs a reaction with ammonium molybdate in sulphuric acid medium. The antibiotic is heated at 91.5°C for 15 min and the absorbance of the coloured product is measured at 670 nm against a reagent blank treated similarly. Beer's law is obeyed up to 125 to 150 μg of cephalosporin in the 5-ml final solution. The effect of reagent concentration and reaction conditions are discussed.     

Determination of Anafranil in Pharmaceuticals by Difference and Difference-Derivative Spectrophotometry

Abstract

Difference (ΔA) and difference first- (ΔD1) and second- (ΔD2) derivative spectrophotometric methods are described for the assay and quality control of anafranil, a powerful antidepressant, in pharmaceutical formulations.

The procedures are based upon the measurement of ΔA, ΔD1 and ΔD2 of anafranil in alkaline solutions against their acidic solutions as blanks.

Interferences of the excipients and diluents or irrelevant absorptions are nullified. Calibration graphs of ΔA, ΔD1 and ΔD2 versus the concentration of the drug showed linear relationships up to 10 μg/ml, with correlation coefficients ranging from 0.9998 to 0.9999.

Detection limits at p = 0.01 level of significance were calculated to be 0.060 (ΔA), 0.056 (ΔD1) and 0.063 (ΔD2) μg/ml. The limits of quantification were 0.45 (ΔA), 0.36 (ΔD1) and 0.81 (ΔD2) μg/ml.

The procedures have been successfully applied to the determination of anafranil in synthetic samples and in commercial pills and injections for this drug with high reliability and repeatability.     

A Kinetic Spectrophotometric Method to Determine the Insecticide Methyl Parathion in Commercial Formulations and the Aqueous Environment

Abstract

A simple kinetic-spectrophotometric method for the analysis of the organophosphate insecticide methyl parathien is presented. The method is based on the alkaline hydrolysis of the insecticide into its main metabolite p-nitrophenol. The influence of reaction variables (pH and temperature), and the effect of other pesticides, are discussed. The calibration graphs (initial rate, fixed time, fixed absorbance) were linear from 2 to 30μg/ml. The precision was calculated for the different methods applied, the relative standard deviation being 6.25% for 4μg/ml.

The proposed kinetic method can be applied directly to synthetic mixtures, commercial formulations and different aqueous environment, with recoveries close to 100%.     

Colorimetric Microdetermination of some Corticosteroid Drugs Using Indophenol as Chromophoric Reagent

Abstract

A simple, rapid and sensitive method for the determination of betamethasone (I), dexamethasone (II) and hydrocortisone (III), either in the pure form or in pharmaceutical formulations is described. The method is based on the development of a brown product with indophenoi in basic aqueous-ethanolic (50% v/v) medium. The optimum reaction conditions for the charge transfer complex formed were assessed. The absorbance measurements were made at 820, 816 and 822 nm for I, II and III respectively. The calibration graph was linear in the range 1-26, 1-32 and 1-35 μg/ml of I, II and III with slopes of 0.028, 0.021 and 0.024, respectively. For more accurate analysis, Ringbom optimum concentration ranges were 2.5-23.0, 3.0-28.5 and 3.0-33.0 μg/ml for I, II and III, respectively. The precision of the procedure was checked by calculating the relative standard deviation of ten replicate determinations on a sample containing 20 μg/ml for each drug and was found to be 1.67, 1.39 and 1.85% for I, II and III, respectively. Many common excepience and common drugs present in their dosage forms do not interfere, and the tolerable levels were evaluated. Results of analysis of pure drugs and their dosage forms by the proposed method are in good agreement with those of the British Pharmacopoeia 1993 procedure.     

Ion-Pairing High-Performance Liquid Chromatographic Determintation of Pyridoxine and Pyrithioxine in Dosage Forms

Abstract

An ion-pairing High-performance liquid chromatographic method is described for the simultaneous determination of pyridoxine HCI and pyrithioxine 2HCI in dosage forms. A reversed-phase chromatography using tetrabutylammonium hydroxide as the counter-ion was employed. the analysis was carried out utilizing an Aminopropylsilicon-(APS-Hypersil) 5 μm column. Calibration curves were rectilinear over the concentration range 5–40 μg/ml for pyridoxine HCI and 10–100 μg/ml for pyrithioxine 2HCi with minimum detectability (S/N=2) of 0.02 and 0.08 μg/ml respectively. the proposed method was applied to tablets containing the two species, and the results obtained were accurate and precise.     

Simultaneous Determination of Diazepam,Oxazepam and Temazepam in Spiked Urine By Hplc

ABSTRACT|Oxazepam and temazepam are two minor metabolites of diazepam. These three benzodiazepines may be found in presence of each other in biological fluids.

Therefore, in this study an HPLC method was developed to separate and analyze them. Benzodiazepines have ability to form inclusion complexes with p-cyclodextrin (β-CyD). According to the degree of binding constant with β-CyD, these compounds can be separated by β-CyD bound to silica (cyclobond column) as the stationary phase using HPLC.

The development and validation of the HPLC procedure for the separation and determination of these compounds in mixtures were studied. The mobile-phase system consisted of phosphate buffer (pH 7): methanol [75:25], with flow rate 0.8 ml min^?1 and UV detection at 240 nm was used.

The calibration graphs were rectilinear from 0.1-2.5 μg/ml and coefficients of variation were <2% for the three compounds in bulk forms.

The method was used to analyse these bezodiazepines in spiked urine containing all three compounds in combination. Recoveries were 97-99.8%

The limit of detection and limit of quantitation were 0.05 μg/ml and 0.1 μg/ml, respectively.

The described method is selective, rapid, simple, reproducible and accurate.     

Spectrophotometric Determination of Cefadroxil in Drug Formulations using flow Injection Analysis

ABSTRACT

A flow injection analysis method for the determination of cefadroxil is proposed. The method is based on the hydrolysis of cefadroxil in sodium hydroxide solution followed by treatment with 1,4-phenylenediamine and Fe(III) in sulphuric acid solution to produce a violet color which has a maximum absorption at 600 nm. Variables such as acidity, reagent concentrations, flow rate of reagents and other FI parameters were optimized to produce the most sensitive and reproducible results. The calibration graph is linear between 80 - 320 mg/l. The detection limit is 40 mg/l with a relative standard deviation, RSD (n=6) of 1.8%. The proposed method, combining the advantages of speed and accuracy was applied to the determination of cefadroxil in pharmaceutical preparations. The results have been compared with those obtained using HPLC method (USP-procedure). Excellent agreement between the results of the proposed method and the HPLC method was observed.     

Extraction-spectrophotometric determination of sulphide and sulphite in waters based on formation of the bis(2,9-dimethyl-1,10-phenanthroline) copper(I) ion

A spectrophotometric method is described for the determination of sulphide or sulphite. The bis(2,9-dimethyl-1,10-phenanthroline)copper(II) ion is reduced at pH 10 by sulphide in the presence of formaldehyde and by sulphide and sulphite in its absence. The resulting copper(I) complex is extracted into chloroform and measured. With any convenient sample volume between 1 and 100 ml, the limits of detection are 0.1 mg for sulphide and 0.25 μg for sulphite. The method is unaffected by iron(II) and nitrite, in concentrations of 100 and 1000 mg l^-1, respectively.     

Semiquantitative and Quantitative Determination of Trace Amount of Phosphate Ion in Water Using Polyurethane Foam Thin -Layer Colorimetry

Abstract

A simple, sensitive and fast method for the colorimetric determination of phosphate ion in water is described.

The method is based on spectrophotometric measurement of the blue molybdoantimony phosphoric acid species sorbed in a polyurethane foam thin-layer for quantitative determination of phosphate ion, or the visual color comparison technique for rapid semiquantitative determination.

The detection limit for the quantitative procedure is 5 μg/1 and for semiquantitative procedure 20 μg/1 for sample volumes of 100 ml and 25 ml, respectively.     

Absorption Spectra of 4f Electron Transitions of Neodymium and Erbium with 8-Hydroxyquinoline-5-sulphonic Acid and Diethylamine Systems and Its Analytical Application

Abstract

In this paper the absorption spectra of 4f electron transitions of the systems of neodymium and erbium with 8-hydroxyquino-line-5-sulphonic acid and diethylamine have been studied by normal and third-derivative spectrophotometry. Their molar absorptivities are 80 l.mol^?1.cm^?1 for neodymium and 65 l.mol^?1.cm^?1 for erbium. Use of the third-derivative spectra, eliminates the interference by other rare earths and increases the sensitivity for Nd and Er. The derivative molar absorptivities are 390 1.mol^?1.cm^?1 for Nd and 367 1.mol^?1.cm^?1 for Er. The calibration graphs were linear up to 11.8 μg/ml of Nd and 12.3 μg/ml of Er, respectively. The relative standard deviations evaluated from eleven independent determinations of 7.2 μg/ml (for Nd) and 8.3 μg/ml (for Er) are 1.3% and 1.4%, respectively. The detection limits (signal to noise ratio = 2) are 0.2 μg/ml for Nd and 0.3 μg/ml for Er. The method has been developed for determining those two elements in mixture of lanthanides by means of the third-derivative spectra and the analytical results obtained are satisfactory.