Rapid Differential Pulse Polarographic Determination of Thiamethoxam in Commercial Formulations and some Real Samples

The polarographic behavior of thiamethoxam (a neonicotinoid insecticide) was studied by direct current and differential pulse polarography. Depending on the pH thiamethoxam exhibited one or two well-defined cathodic polarographic waves. The characteristics of the electrode reaction were investigated and it was found that at pH > 5.0 the target molecule captures four electrons in the first step, and two in the second. Based on the reduction behavior of the target molecule on the mercury electrode, a differential pulse polarographic method was elaborated for the rapid determination of thiamethoxam at pH 8.0. With the optimized method, a linear response for thiamethoxam was found in the concentration range of 31.1 − 470 ng cm⁻³, the relative standard deviation did not exceed 1.6%, and the detection and quantitation limits were found to be 9.3 ng cm⁻³ and 31.1 ng cm⁻³, respectively. The method was applied to the determination of thiamethoxam in commercial formulations and real samples (potato and maize). The procedure is simple, fast, sensitive, and compares well with comparative spectrophotometric and chromatographic (HPLC/DAD) methods.     

Preliminary Contribution to the Quantification of HMF in Honey by Electrochemical Biosensor Chips

Several hydroximethylfurfural (HMF) microbiosensors, based on a microelectrode configuration built by photolithographic techniques, have been developed. Two different biosensors based on the aldehyde dehydrogenase (ALDH) enzyme coupling with NADH oxidase (NOD) or diaphorase (Diaph) are described. Experimental variables were optimized using experimental design methodology, by central composite designs, taking the intensity registered for a given HMF solution as response. Given the reproducibility (residual standard deviation (RSD), 7.20%), repeatability (RSD=3%) and limit of detection (LOD)=1.68×10^?4 mol dm^?3 (α=β=0.05 and a replicate) reached by the ALDH‐Diaph microbiosensor under the optimum conditions, the analysis of HMF in honey was successfully accomplished.     

纳米ZnO修饰电极的制备及其对血红蛋白, 细胞色素c的直接电化学研究

A novel electrochemical method as a sensitive and convenient technique for the determination of heme proteins based on their interaction with ZnO nanorods was developed. A ZnO nanorod modified glassy carbon electrode (ZnO/GCE) was prepared and the electrochemical behaviors of heme proteins, such as hemoglobin (HB) and cytochrome c (Cyt-c), on this modified electrode have been studied. The results showed that both HB and Cyt-c could be oxidized on the modified electrode and the oxidation currents were linear to the concentrations of the analytes in aqueous solutions. In addition, the results of flow injection analysis (FIA) further suggested the high stability and reproducibility of the ZnO nanorod modified electrode. So this method can be applied to the determination of HB and Cyt-c in biological systems.     

Electrochemical Determination of Methyltin Compounds

 The electrochemical behaviour of monomethyltin, dimethyltin and trimethyltin compounds in 20% (V/V) methanol/water solution, 0.05 mol/L in tetraethylammonium perchlorate at pH 2.5, has been investigated by differential pulse polarography and differential pulse anodic stripping voltammetry. In differential pulse polarography, dimethyltin and trimethyltin gave one reversible wave with peak potentials at −0.70 V and −1.07 V, respectively. Detection limits were 6.6 × 10⁻⁷ mol/L for dimethyltin and 4.1 ×  10⁻⁶ mol/L for trimethyltin. The electrochemistry of monomethyltin was found to be more complex. By differential pulse anodic stripping voltammetry, monomethyltin, dimethyltin and trimethyltin produced distinct stripping peaks (−0.39 V, −0.75 V and −1.14 V, respectively), which allow to determine these compounds at trace levels. Using this new method, detection limits were: 1.2 × 10⁻⁷ mol/L for monomethyltin, 1.7 × 10⁻⁷ mol/L for dimethyltin and 1.4 × 10⁻⁶ mol/ L for trimethyltin. For monomethyltin, a second peak (E_p = −0.60 V), less sensitive (detection limit of 2.5 × 10⁻⁶ mol/L), was also observed at concentrations above 4.2 × 10⁻⁷ mol/L. Recoveries of methyltin compounds added separately to tap water samples at the 0.42–16.9 μmol per litre level ranged from 84.5 to 99.8% depending upon the methyltin species. Received January 3, 2001. Revision August 10, 2001.     

尼莫地平的示波极谱法测定与其电化学行为

在ＮＨ３－ＮＨ４Ｃｌ 底液中,尼莫地平在汞电极上有一灵敏的导数还原峰,峰电位为－ ０．７３Ｖ （ｖｓ．ＳＣＥ）。峰电流与尼莫地平的浓度在２．０×１０－ ７～７．０×１０－ ５ｍ ｏｌ／Ｌ范围内成线性关系（ｒ＝ ０．９９９８）。检出限为１．０×１０－ ８ｍ ｏｌ／Ｌ。该法应用于片剂中尼莫地平含量的测定,对尼莫地平在汞电极上的电化学行为进行了探讨。     

舒必利的示波极谱测定与电化学行为

在ＰＨ５．０的ＨＡｃ－ＮａＡｃ底液中，舒必利在汞电有上有一灵敏的导数还原峰，峰电位为－１．７８Ｖ。峰电流与舒必利的浓度在４．０×１０＾－７－－８．０×１０＾－６ｍｏｌ／Ｌ范围内有线性关系。检测奶为１．０×１０＾－７ｍｏｌ／Ｌ。该法应用于剂中必利含量的测定，结果含人满意。还对舒必利在电极上的电化学行为特别是其吸附性进行了探讨。     

Electrochemical Determination of the “Furanic Index” in Honey

5-(hydroxymethyl)furan-2-carbaldehyde, better known as hydroxymethylfurfural (HMF), is a well-known freshness parameter of honey: although mostly absent in fresh samples, its concentration tends to increase naturally with aging. However, high quantities of HMF are also found in fresh but adulterated samples or honey subjected to thermal or photochemical stresses. In addition, HMF deserves further consideration due to its potential toxic effects on human health. The processes at the origin of HMF formation in honey and in other foods, containing saccharides and proteins—mainly non-enzymatic browning reactions—can also produce other furanic compounds. Among others, 2-furaldehyde (2F) and 2-furoic acid (2FA) are the most abundant in honey, but also their isomers (i.e., 3-furaldehyde, 3F, and 3-furoic acid, 3FA) have been found in it, although in small quantities. A preliminary characterization of HMF, 2F, 2FA, 3F, and 3FA by cyclic voltammetry (CV) led to hypothesizing the possibility of a comprehensive quantitative determination of all these compounds using a simple and accurate square wave voltammetry (SWV) method. Therefore, a new parameter able to provide indications on quality of honey, named “Furanic Index” (FI), was proposed in this contribution, which is based on the simultaneous reduction of all analytes on an Hg electrode to ca. −1.50 V vs. Saturated Calomel Electrode (SCE). The proposed method, validated, and tested on 10 samples of honeys of different botanical origin and age, is fast and accurate, and, in the case of strawberry tree honey (Arbutus unedo), it highlighted the contribution to the FI of the homogentisic acid (HA), i.e., the chemical marker of the floral origin of this honey, which was quantitatively reduced in the working conditions. Excellent agreement between the SWV and Reverse-Phase High-Performance Liquid Chromatography (RP-HPLC) data was observed in all samples considered.     

Differential pulse polarographic determination of Co(II) using moxifloxacine

The polarographic reduction of Co(II) in the presence of moxifloxacin (1-cyclopropyl-7-[(S,S)-2.8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1.4-dihydro-4-oxo-3-quinolinecarboxylic acid) gives rise to an additional adsorption peak corresponding to the reduction of Co(II)-moxifloxacin complex on the mercury drop electrode at −1.17 V. This new peak is applicable to Co(II) determination with the linearity proportional to the Co(II) concentration in the range of 4.93 × 10⁻⁷−6.90 × 10⁻⁵ M and can be attributed to an adsorption-controlled process with an irreversible reduction. Without using moxifloxacin, the polarographic determination of 2.50 × 10⁻⁶ M Co(II) is impossible under the given conditions due to very poor sensitivity at −1.38 V. The proposed method showed good precision and accuracy with a relative standard deviation of 3.01% and relative error of +6.40% for the determination of 2.50 × 10⁻⁶ M Co(II) next to 5.0 × 10⁻⁶ M of Zn(II), Ni(II), and Cd(II). The accuracy of the method was also checked by the determination of Co(II) spiked with tap water and certified sea water, and the percentage recoveries were 97.5 and 96.7%, respectively (n = 4 at 95% confidence interval). The text was submitted by the authors in English.     

Differential Pulse Polarographic Determination of Some (5-Nitro-2-Furl)Alkylidene-2-Hydrazinothiazole Derivatives

Abstract

The differential pulse polarographic analysis of four (5-nitro-2-furyl)alkylidene-2-hydrazinothiazole derivatives are presented, 0.1 M tetramethylammonium tetrafluoroborate solution was found to be the best supporting electrolyte. At static mercury drop electrode the nitro group of the compounds studied was reduced to the amine in a six-electron process. Linear response was observed over 0.2 to 140 mg.L^?1 with a relative standard deviation of 3.3%.     

Polarographic behaviour of some organotin(IV) compounds in dimethyl sulphoxide

The differential pulse polarographic behaviour in dimethyl sulphoxide (DMSO) of 14 organotin(IV) compounds having the general formula R₃SnX (R = Me, Ph; X^? = NCS^?, N₃^?, N₃^?, NO₃^?, OH^?, NCO^? and OAc^?) and ⁿBu₃SnCl and ⁿBu₂SnCl₂ has been studied. The peak potential was found to depend markedly on the organic group and to a lesser extent on the nature of the anion X. The phenyltin compounds were reduced at lower potentials than the corresponding methyltin compounds. The data obtained could be used for trace determination of these compounds. Linear calibration curves were obtained over the concentration range of 2.8 × 10^?4 to 1.9 × 10^?6 mol dm^?3.     

Electrochemical behavior of lead(II) at poly(phenol red) modified glassy carbon electrode, and its trace determination by differential pulse anodic stripping voltammetry

Poly(phenol red) (denoted as PPR) films were electrochemically synthesized on the surface of a glassy carbon electrode (GCE) by cyclic voltammetry to obtain a chemically modified electrode (denoted as PPR-GCE). The growth mechanism of PPR films was studied by attenuated total reflection spectroscopy. This PPR-GCE was used to develop a novel and reliable method for the determination of trace Pb²⁺ by anodic stripping differential pulse voltammetry. At optimum conditions, the anodic peak exhibits a good linear concentration dependence in the range from 5.0 × 10⁻⁹ to 5.0 × 10⁻⁷ mol L⁻¹ (r = 0.9989). The detection limit is 2.0 × 10⁻⁹ mol L⁻¹ (S/N = 3). The method was employed to determine trace levels of Pb²⁺ in industrial waste water samples. Correspondence: Gongjun Yang, Ming Shen, College of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P.R. China     

Determination of Chloramphenicol (CAP) in Food Products by Differential Pulse Polarography

ABSTRACT

The electrochemical determination of chloramphenicol (CAP) in food using mini- and micro- mercury drop electrodes and differential pulse polarography (DPP) has been elaborated. A phosphate buffer with pH 6.6 was used as the basic electrolyte. The analysis was based on a peak at the potential E_p = ?0.320 V which showed a clearly linear dependence of the peak current on the concentration of chloramphenicol in the sample under investigation. Prior to the determination of chloramphenicol in actual samples it was necessary to extract this antibiotic with organic solvents such as methanol, ethanol and ethyl acetate.

In order to separate CAP in its basic form, various modifications of sample preparation procedures were made for the analysis with the use of selected hydrolytic enzymes. The determined quantities of CAP in the samples of meat, milk, eggs and their products ranged in the ng/g d.w. range.

For purposes of comparison and verification of the electrochemical results of CAP determination, chloramphenicol was determined in the same samples, by the immunoenzymatic method ELISA.     

电化学传感分析平台测定污水中的Cr(VI)

结合微型电化学仪器,研究了一种快速、便携、灵敏的Cr(VI)电化学传感分析平台,用于污水中Cr(VI)的检测。采用三电极体系,差分脉冲阴极溶出伏安法(DPCSV),记录伏安曲线中Cr(VI)的还原峰。Cr(VI)的溶出峰电流与其浓度在2～500 μmol L-1范围内有良好的线性关系,测得Cr(VI)的检测限为0.55 μmol L-1 (28.60 g L-1),达到了国际卫生组织（WHO）规定的饮用水中Cr(VI)的最高含量50 g L-1。测得镀铬厂废水中Cr(VI)含量为2.03 mol L-1,与国标法中光谱学分析法的结果基本一致。该法重现性好、灵敏度高,使其应用在现场实时监测环境中的Cr(VI)具有很大的潜力。     

Direct Determination of Chlorpyrifos in Honey by Neutral Desorption-Extractive Electrospray Ionization Mass Spectrometry

Neutral desorption-extractive electrospray ionization mass spectrometry was used for the direct, rapid, and quantitative determination of chlorpyrifos in honey without pretreatment. Under the optimized conditions, the limit of detection was 1.64?ng/mL with a linear dynamic range from 10 to 1,000?ng/mL and relative standard deviations from 1.97 to 6.14%. The recoveries of fortified honey samples at 50 and 500?ng/mL were 82.02 and 109.28% with relative standard deviations of 4.02 and 4.34%, respectively. This protocol offers high sensitivity, good precision, rapid analysis, and high specificity in a complex matrix.     

Direct Determination of Benzo(a)pyrene and Pyrene in Solid Environmental Samples by Jet-Cooled Spectroscopy

Abstract

We report the direct determination of two polycyclic aromatic hydrocarbons (PAH), Benzo(a)Pyrene [B(a)P] and Pyrene (Pyr), in solid environmental samples, i.e. a marine sediment and scrapings from the interior walls of a steel foundry, by the supersonic jet/laser induced fluorescence technique. We have found limits of detection (LOD) for these samples of 900ng (1.8ppm) for B(a)P and 200ng (0.4ppm) for Pyr. The LOD's for prepared solutions were 100 ng for B(a)P and 40 ng for Pyr. In validating the procedure we have also analyzed a standard mixture of PAH. The results of our analyses of the solid environmental samples agree well with those obtained by chromatography in other laboratories. We have found evidence of incomplete recovery of PAH from soil sediments by a prolonged low temperature Soxhlet extraction using methylene chloride.     

Electrochemical Reduction of Benzaldehyde as its Girard-P Derivative at the Mercury Electrode and Differential-Pulse Polarographic Determination of Benzaldehyde

 The polarographic behaviour of benzaldehyde as its Girard-P derivative was studied using various electrochemical techniques and a method for the determination of benzaldehyde (10⁻⁶ − 8 × 10⁻⁵ M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.7% (ten determinations at the 5 × 10⁻⁵ M level). The applicability of this method is checked in benzyl alcohol and synthetic samples containing, o-aminophenol, 2-amino pyridine, o-cresol, amylic alcohol, salicylic acid, 4-aminobenzoic acid and naphthalene sulfonic acid. Received April 6, 2000. Revision February 13, 2001.     

Alternating Current Tensammetry of Tetraphenylborate (TPB) and its Application for Potassium Determination

Alternating‐current polarography of tetraphenylborate ion (TPB) in acetate buffer (pH 4 to 5) or 0.1 to 0.5 M NaCl produces a characteristic tensammetric (pseudocapacitive) peak at ?0.95 V (vs. SCE). Within a limited range (till about 0.2 mM), the tensammetric peak current is proportional to the TPB concentration but it levels off at higher concentration. TPB concentration can also be determined within 5 to 50 μM by measuring the capacity current at ?0.4 V or the differential pulse polarographic peak current at ?0.85 V. The tensammetric peak current was used to determine the solubility of potassium tetraphenylborate in acetate buffer and sodium chloride solutions. Also, a method for amperometric back‐titration of potassium ion was worked out and applied to the analysis of mineral water.     

Simultaneous Determination of Trans-Cinnamaldehyde and Benzaldehyde in Different Real Samples by Differential Pulse Polarography and Study of Heat Stability of Trans-Cinnamaldehyde

Abstract

A simple, sensitive, and accurate differential pulse polarography method for simultaneous determination of trans-cinnamaldehyde and benzaldehyde in food and drug samples were developed. DC polarography, CV, and coulometric techniques were used for investigation the electrochemical behavior of both compounds. In phosphate buffer (pH = 8.2) and 10% v/v of methanol the differential pulse voltammograms of trans-cinnamaldehyde (?1.05 V) and benzaldehyde (?1.31 V) display reproducible peaks. Under these conditions a strict linearity between both analyte concentrations and their peaks height were observed. The detection limits were calculated to be 2.5 × 10^?8 and 1.2 × 10^?8 M for trans-cinnamaldehyde and benzaldehyde in pH = 8.2, respectively. The relative standard deviations for 1.0 × 10^?6 M of both analytes were 2.04 and 1.18. The heat stability of trans-cinnamaldehyde was studied, and it was found that trans-cinnamaldehyde undergoes a heat-induced decomposition at low temperature (>70°C) to produce benzaldehyde.     

Determination of Neonicotinoids in Honey Samples Originated from Poland and Other World Countries

A method development for determination of neonicotinoid residues in honey samples was developed. The proposed methodology consisted in QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe). That was used for sample preparation and UHPLC/UV (ultra-performance liquid chromatography with ultraviolet detection) utilized for chromatographic analysis. The developed method proved to be sensitive, with LOD (Limit of detection) value in the range of 60.80 to 80.98 ng/g hence LOQ (Limit of quantification) value was in the range of 184.26 to 245.40 ng/g. The method has tested on Polish honey and applied to honey from various countries (Bulgaria, Czech Republic, France, Greece, Italy, Portugal, Romania, Australia, Brazil, Cameroon, Russia, USA and Turkey). Several honey types were tested, while physicochemical properties of all honeys and were investigated. The methodology for general characterization of pollen grains originated from selected plants, to confirm the type of honey was also presented. There was a total lack of the mentioned neonicotinoids in sunflower honey. Except of this, only two samples of rapeseed and two samples of acacia honey (from Poland and Romania) were neonicotinoids free. In 19 samples the targeted pesticides were detected above LOQ. In all other investigated samples, the neonicotinoids were found at least at the LOD or LOQ level.     

铜氮杂配合物修饰金电极对抗坏血酸的分析测定

本实验制备了一种新型的氮杂铜配合物修饰金电极,该电极可用于抗坏血酸的测定。采用循环伏安法和扫描电化学显微镜技术对电极进行了表征。该修饰电极可催化氧化抗坏血酸,相对于裸电极抗坏血酸在修饰电极上氧化电位移动了250mV,并且氧化电流在抗坏血酸的浓度为5.0×10−7 to 4.0×10−5 mol/L时呈线性关系,检测限为4.8×10-8 mol/L。用此方法测定抗坏血酸与文献报道的测定结果一致,这表明该电极可用作抗坏血酸测定的电化学传感器。