Analytical applications of picolinealdehyde salicyloylhydrazone: II. Extraction and spectrophotometric determination of vanadium(V)

Picolinealdehyde salicyloylhydrazone reacts with vanadium(V) to produce a yellow 1:1 complex (λ_max = 400 nm, ? = 2.17 × 10⁴ liters · mol^?1 cm^?1) in aqueous ethanolic solution. The yellow complex can be extracted into chlorobenzene (λ_max = 425 nm, ? = 2.16 × 10⁴ liters · mol^?1 cm^?1) and used for the spectrophotometric determination of trace amounts of vanadium. Interferences have been investigated. The method has been applied to the determination of vanadium in steel and in lead concentrates.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Spectrophotometric Study of 1, 3-Cyclohexanedione Bisthiosemicarbazone Monohydrochloride -Bi (III) Complex. Determination of Bi (III)

Abstract

The spectrophotometric study was made of red-violet 1, 3-cyclohexanedione bis-thiosemicarbazone-Bi (III) in an acidic dimethylformamide-water solution (λ_max = 540 nm, ? = 3.3 × 10^?4 1. mol^?1. cm^?1, stoichiometry 3:1, apparent stability constant (6.0 × 10¹⁰). A new method for the spectrophotometric determination of Bi (III) is proposed for concentrations between 0.7 and 7.4 ppm. The relative error (95 % confidence level) is 0.5 % for 3.7 ppm of Bi (III).

The extraction with methyl isobutyl ketone of the red-violet complex was also studied spectrophotometrically (λ_max = 550 nm, ? = 3.34 × 10⁴ 1. mol^?1.cm^?1, stoichiometry 2:1). A new method for the extraction-spectrophotometric determination of Bi (III) is proposed for concentrations, in aqueous phase, between 0.2 and 1.2 ppm. The relative error (95 % confidence level) is 0.8 % for 0.9 ppm of Bi (III).     

Spectrophotometric study of complexes of mercury(II) with mono- and dithiosemicarbazones

The formation of complexes at pH 4.7 of the Hg(II) with five monothiosemicarbazone and two dithiosemicarbazone has been studied. The mercury(II) reacts with monothiosemicarbazones of salicylaldehyde (λ_max = 363 nm, E = 1.69 × 10⁴liters · mol^?1cm^?1), pi-colinadehyde (λ_max = 363 nm, E = 2.38 × 10⁴liters · mol^?1cm^?1), 6-methyl-picolinaldehyde (λ_max = 363 nm, E = 2.28 × 10⁴liters · mol^?1cm^?1), di-2-pyridylketone (λ_max = 380 nm, E = 2.08 × 10⁴liters · mol^?1cm^?1), and o-naphthoquinone (λ_max = 540 nm, E = 1.03 × 10⁴liters · mol^?1cm^?1) and with dithiosemicarbazones of 1,4-dihydroxyphthalimide (λ_max = 430 nm, E = 2.56 × 10⁴liters · mol^?1cm^?1) and dipyridylglyoxal (λ_max = 363 nm, E = 2.37 × 10⁴liters · mol^?1cm^?1). A critical comparison of the stoichiometry and apparent stability constant of complexes with mono- and dithiosemicarbazones is given.     

p-Sulphobenzeneazo-4-(2,3-dihydroxy-5-chloropyridine) as a spectrophotometric reagent for vanadium in steels

Vanadium(V) reacts quickly with the reagent to form a water-soluble orange-red 1:2 complex (λ_max = 495 nm ; ? = 2.5 × 10⁴ l mol^-1 cm^-1). The complex is used to determine 0.04–1.5% vanadium in steels.     

Spectrophotometric Study of 1,2,7-Trihydroxyanthraquinone-Mg(II) Complex. Determination of Mg(II)

Abstract

The spectrophotometric study of violet complex Anthrapurpurin-Mg(II) in a basic medium and a hydroalcoholic solution was made (δ_max - 530 nm., ? = 3.5 × 10³ 1 mol^?1 cm^?1, stoichiometry 1:1, apparent constant of stability log K = 9. 26). A new method for the spectrophotometric determination of Mg(II) is proposed for concentrations between one and six ppm. Relative errors between replicate samples were 0.90 %.     

TETRAETHYLPHYROPHOSPHITE AS A BRIDGING LIGAND IN A BIMETALLIC RUTHENIUM(II) - RUTHENIUM(II) COMPLEX

Abstract

The complex μ-TEPP-trans-bis[P(OEt)₃Ru(NH₃)₄]₂(PF₆)₄ has been prepared and characterized by microanalysis, vibrational and electronic spectroscopy (λ_max=299 nm, ?=6.4 × 10² M^?1 cm^?1; λ_max=262 nm, ?=8.6 × 10² M^?1 cm^?1), and cyclic voltammetry (E°'=+0.64 V versus S.C.E., 25°, μ=0.10 M NaCf₃COO, C_H+=1 × 10^?3 M). In aqueous solutions, ([H⁺] > 1 × 10^?4 M), the binuclear species undergoes hydrolysis yielding the mononuclear species trans-(Ru(NH₃)₄P(OEt)₃(H₂O)]²⁺ with a specific rate constant of 2.4 × 10^?5 sec^?1 at 25° δH^#=84.5 kJ mol^?1; δS^#=?49.4 J mol^?1 K^?1.     

DI-2-Pyridyl ketone thiosemicarbazone as an analytical reagent

The synthesis, characteristics and analytical reactions of di-2-pyridyl ketone thiosemicarbazone are described. This compound reacts with iron(II) (λ_max=410mm, ε = 9.3 · 10³ 1 mol^?1 cm^?1), nickel(II) (λ_max =395 mm ε =19.6·10³ 10 mol ^?1 cm ^-1), cobalt(II) (λ_max = 415 nm. ε = 1.0 · 10⁴ mol^?1 cm^?1 ) and copper(I) (λmax =395mm ε = 11.3 · 10³ mol^?1 cm^?1) A critical comparison of di-2-pyridyl ketone, picolinaldehyde and bipyridylglyoxal thiosemicarbazones as analytical reagents is given.     

Ultraviolet absorption spectra of some alkylchloramines

The ultraviolet spectra of six alkylchloramines are determined between 220 and 320 nm. The wavelengths of maximum absorption are 244 nm (? = 458 l mol^?1 cm^?1) for monochloramine, 252 nm (? = 372 l mol^?1 cm^?1) for methylchloramine, 251 nm (? = 378 l mol^?1 cm^?1) for ethylchloramine, 250 nm (? = 368 l mol^?1 cm^?1) for isopropylchloramine, 264 nm (? = 354 l mol^?1 cm^?1) for dimethylchloramine and 262 nm (? = 315 l mol^?1 cm^?1) for diethylchloramine.     

Extraction and spectrophotometric determination of trace amounts of tin(II) with diphenylglyoxal bis(2-hydroxybenzoylhydrazone)

Diphenylglyoxal bis(2-hydroxybenzoylhydrazone) has been used as a sensitive reagent for the spectrophotometric determination of tin. This reagent forms an orange-yellow complex with stannous ion at pH 3.5–7.0 (λ_max = 455 nm, ? = 2.25 × 10⁴ liter mol^?1/cm^?1 while no reaction is observed with quadrivalent tin. The colored complex extracted into isobutyl methyl ketone has been used for the spectrophotometric determination of trace amounts of tin(II). The molar absorption in the organic solvent is 3.54 × 10⁴ liter mol^?1 cm^?1 and the compound shows its maximum absorbance at 455 nm. The interferences of foreign ions have been determined.     

Spectrophotometric determination of vanadium in petroleum crudes and derivatives

The spectrophotometric study of the complexation reaction between 5,5′methylenedisalicylhydroxamic acid and V(V) shows that two complexes are formed, the 1:1 (? = 5100 liters mol^?1 cm^?1 at 490 nm, log K_est = 5.8 ± 0.1) and the 1:2 (L:V) (? = 6250 liters mol^?1 cm^?1 at 600 nm, log K_est = 6.1 ± 0.1). A spectrophotometric method is developed for the determination of vanadium (2–9 ppm) at 2 N HCl and 495 nm, which allows its determination in petroleum crude oils with a series of advantages over the ASTM D-1548-63 method.     

Structure and properties of 2-[(E)-2-(4-dipropylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium chloride

The structure of styryl dye, 2-[(E)-2-(4-dipropylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium chloride (I), was investigated using methods such as UV-VIS, fluorescence spectroscopy, and NMR (¹H, ¹³C, APT, HMQC, COSY) and also by examining its electrochemical properties. A study of the acid-base properties revealed the existence of three different forms of the dye. The mechanisms of protolysis and hydrolysis are discussed. The reagent exists in a reactive single-charged form I ⁺ over a wide range of acidity (pH 4–11). The optimum analytical wavelength of the singlecharged form is 550 nm, where the molar absorptivity is 5.51 × 10⁴ L mol^?1 cm^?1. The values of the optimum analytical wavelength and molar absorptivity of the protolysed and hydrolysed forms are: λ _max(I-H²⁺) = 380 nm, ?(I-H²⁺) = 2.01 × 10⁴ L mol^?1 cm^?1; λ _max(I-OH) = 320 nm, ?(I-OH) = 1.12 × 10⁴ L mol^?1 cm^?1. A theoretical study of the spectral and chemical properties of I was carried out by performing quantum chemical calculations.     

Analytical applications of 3-(2′-thiazolylazo)-2,6-diaminopyridine: Spectrophotometric determination of palladium

3-(2′-Thiazolylazo)-2,6-diaminopyridine reacts with palladium(II) in strongly perchloric acid media, to produce a blue 1:1 complex (λ_max = 665 nm, ? = 1.37 × 10⁴ liters · mol^?1 · cm^?1), which allows the spectrophotometric determination of 0.6 to 4.5 ppm of palladium. The method is applied to the determination of palladium in small samples of hydrogenation catalysts.     

Extractive spectrophotometric determination of nitrite in polluted waters

Nitrite is diazotised with p-nitroaniline in hydrochloric acid and coupled with 8-quinolinol in alkaline medium to give a purple azo dye (λ_max = 550 nm, ? = 3.88 × 10⁴ l mol^-1 cm^-1). Extraction of the dye into 3-methyl-1-butanol shifts the absorption maximum to 570 nm and improves the apparent molar absorptivity to 5.852 × 10⁴ l mol^-1 cm^-1. Beer's law is obeyed for 0.01–0.06 ppm nitrite. The Sandell sensitivity is 0.00078 μg cm^-2. The method is applicable to polluted waters.     

Kinetische untersuchung der reversiblen dimerisierung von o-phenylendioxidimethylsilan

The reversible dimerisation of o-phenylenedioxydimethylsilane (2,2-dimethyl-1,3,2-benzodioxasilole) has been studied by ¹H NMR spectroscopy. The kinetics of this reaction can be described quantitatively by a bimolecular 10-ring formulation reaction and a monomolecular backreaction. The thermodynamic and kinetic parameters are: ΔH⁰ = ?43 kJ mol^?1; ΔS⁰ = ?112 J mol^?1 K^?1; ΔG⁰₂₉₈ = ?9.6 kJ mol^?1; ΔH³₂₉₈ = 57 kJ mol^?1; ΔS³₂₉₈ = ?129 J mol^?1 K^?1; ΔG³₂₉₈ = 96 kJ mol^?1; E_a = 60 kJ mol^?1; A = 3.17 × 10⁶ l mol^?1 s^?1. Remarkable is the low activation energy of formation of the ten-membered ring, considering that two SiO bonds have to be cleaved during the reaction. Transition states and possible structures of the ten-membered heterocycle are discussed.     

Die Reaktion von Eisen(III) mit Brenzkatechin-3,5-disulfonsäure (Tiron) und Äthylendiamintetraessigsäure

The Reaction of Iron(III) with Catechol-3,5-Disulphonic Acid (Tiron) and Ethylene Diamine-Tetracetic Acid In the system iron(III)-Tiron-EDTA a ternary chelate could be detected besides the well known complexes in a weak acid solution. By means of spectro-photometric measurements under various conditions (concentration of ligands) we found [FeHYL]^4? with λ_max = 555 nm und ε₅₅₅ = 2500 l · mol^?1 · cm^?1. The formation of the ternary chelate is an inner-complex reaction of displacing, in which donor atoms of the EDTA in FeY^? are replaced by Tiron. By graphic methods the equilibrium constants could be calculated from the measurements.     

Spectrophotometric determination of zinc in pharmaceutical preparations with biacetyl mono(2-pyridyl)-hydrazone

The biacetyl mono(2-pyridyl)hydrazone (BPH) spectrophotometric procedure for zinc (λ_max = 440 nm, ? = 52,100 liters mol^?1 cm^?1, 1 ml BPH at 0.25% in ethanol/25 ml, 20% of ethanol as medium, boric acid/sodium hydroxide, pH 10, buffer) has been applied to the determination of zinc in pharmaceutical preparations (ophthalmic solutions, mouthwash liquids, and cream ointments) with good results.     

A Simple Synthetic Method of a 1,3,5‐Triazine UV Absorbent CGL‐479 and Its Characterization

As a novel ultraviolet (UV) absorbent with excellent performance in UVA section (320 ~ 400 nm), 2‐{2‐hydroxy‐4‐[(octyloxycarbonyl)ethylideneoxy]phenyl}‐4,6‐Bis(4‐biphenylyl)‐1,3,5‐triazine (CGL‐479) was synthesized in a simple method with a total yield of 45.3% in four steps. Its outstanding UV absorption capability (λ_max = 326 nm, ε_max = 4.15 × 10⁴ L?mol^?1?cm^?1), high thermostability [T₅ (the temperature of losing 5% in weight) = 385 °C], and compatibility with polymer materials make it a potential substitute of the traditional UV absorbents.     

Analytical study of the phenyl-2-pyridyl ketone azine-palladium system. Photometric determination of palladium

Phenyl-2-pyridyl ketone azine reacts with palladium(II) to produce a yellow 1:1 complex (λ_max = 425 nm, ? = 10.4 × 10³M^?1 cm^?1 in aqueous ethanolic solution) and a red-violet 3:1 complex (λ_max = 530?540 and 380?390 nm). The yellow complex in aqueous ethanolic solution has been used for the spectrophotometric determination of trace amounts of palladium. The method has been applied to the determination of palladium in some catalysts and one mineral.     

Spectrophotometric Determination of Formaldehyde

ABSTRACT

A simple and very sensitive method for the determination of formaldehyde is described. Formaldehyde reacts with phloroglucinol in acid medium producing a yellow dye with λ_max at 435nm. The method is useful for the determination of formaldehyde in the range 0-2.5μg in an overall volume of 10mL with molar absorptivity of 8.3 × 10⁴1 mol^?1 cm^?1 and a relative standard deviation of 2% at 1.5μg level (n=10).