Determination of polyphenols in oats by near-infrared spectroscopy (NIRS) and two-dimensional correlation spectroscopy

Two-dimensional correlation spectroscopy (2DCOS) and near-infrared spectroscopy (NIRS) were used to determine the polyphenol content in oat grain. A partial least squares (PLS) algorithm was used to perform the calibration. A total of 116 representative oat samples from four locations in China were prepared and the corresponding near-infrared spectra were measured. Two-dimensional correlation spectroscopy was employed to select wavelength bands for the PLS regression model for the polyphenol determination. The number of PLS components and intervals was optimized according to the coefficients of determination (R²) and root mean square error of cross validation (RMSECV) in the calibration set. The performance of the final model was evaluated using the correlation coefficient (R) and the root mean square error of validation (RMSEV) in the prediction set. The results showed the band corresponding to the optimal calibration model was between 1350 and 1848?nm and the optimal spectral preprocessing combination was second derivative with second smoothing. The optimal regression model was obtained with an R² of 0.8954 and an RMSECV of 0.06651 in the calibration set and R of 0.9614 and RMSEV of 0.04573 in the prediction set. These measurements reveal the calibration model had qualified predictive accuracy. The results demonstrated that the 2DCOS with PLS was a simple and rapid method for the quantitative determination of polyphenols in oats.     

Determination of Iridoids in Gentiana rigescens by Infrared Spectroscopy and Multivariate Analysis

Gentiana rigescens is a famous herbal medicine in China for treatment of convulsion, rheumatism, and jaundice. Here, the infrared determination of gentiopicroside, swertiamarin, sweroside, and loganic acid in G. rigescens from different areas and varieties was presented for the first time. Reference information for the iridoids were obtained by high-performance liquid chromatography. Partial least squares was used to characterize the relationship between spectra matrix and concentration vector for the determination of the analytes. For determination of gentiopicroside, the appropriate performance of partial least squares model was acquired with coefficient of determination of calibration and coefficient of determination of prediction values of 0.965 and 0.868. The root mean square error of estimation (RMSEE), root mean square error of cross validation (RMSECV), root mean square error of prediction (RMSEP), and residual predictive deviation (RPD) values were 2.612, 5.292, 5.239?mg g^?1, and 2.701, respectively, based on the first derivative and multiplicative scatter correction. For determination of the total iridoids, the best results were obtained using the coefficient of determination of calibration and coefficient of determination of prediction of 0.943 and 0.834, RMSEE, RMSECV, RMSEP and RPD of 3.896, 7.536, 6.543?mg g^?1 and 2.438, respectively, based on the first derivative. Both models were reliable and robust. The results demonstrated that infrared spectroscopy provided a rapid, low-cost tool to monitor the quality of G. rigescens by the determination of the iridoids.     

Determination of Basic Nitrogen in Residues of Crude Oil Distillation Using ATR-FTIR and Chemometric Methods

A method for basic nitrogen determination in residues of crude oil distillation using infrared spectroscopy and chemometrics algorithms was developed. Interval partial least squares, synergy interval partial least squares, and backward interval partial least squares were evaluated for calibration model construction. The samples were divided into a calibration and prediction set containing 40 and 15 samples, respectively. The first derivative with a Savitzky-Golay filter and the mean centered data showed the best results and were used in all calibration models. The backward interval partial least squares algorithm with spectra divided in 60 intervals and combinations of 4 intervals (1407 to 1372; 1117 to 1082; 971 to 936; 914 to 879 cm^?1) showed the best root mean square error of prediction of 0.016 wt%. This calibration model displayed a suitable correlation coefficient between reference and predicted values.     

应用遗传算法和PLS的近红外光谱预测玉米中淀粉含量的研究

以普通玉米籽粒为试验材料,在应用遗传算法结合偏最小二乘回归法对近红外光谱数据进行特征波长选择的基础上,应用偏最小二乘回归法建立了特征波长测定玉米籽粒中淀粉含量的校正模型．试验结果表明,基于11个特征波长所建立的校正模型,其校正误差（RMSEC）、交叉检验误差（RMSECV）和预测误差（RMSEP）分别为0.30％、0.35％和0.27％,校正数据集和独立的检验数据集的预测值与实际测定值之间的相关系数分别达到0.9279和0.9390,与全光谱数据所建立的预测模型相比,在预测精度上均有所改善,表明应用遗传算法和PLS进行光谱特征选择,能获得更简单和更好的模型,为玉米籽粒中淀粉含量的近红外测定和红外光谱数据的处理提供了新的方法与途径．     

Determination of Nitrogen in Rapeseed by Fourier Transform Infrared Photoacoustic Spectroscopy and Independent Component Analysis

Fourier-transform mid-infrared photoacoustic spectroscopy was utilized for rapid and nondestructive determination of nitrogen in rapeseeds. Rapeseed spectra were characterized by independent component analysis for quantitative calibration. A calibration model was built by using independent components as the input for partial least squares. Compared to full-spectrum partial least squares, the combined model achieved higher prediction accuracy with a residual predictive deviation of 2.06. Moreover, a genetic algorithm coupled with partial least squares was adopted to optimize the independent components for partial least square modeling and provide a further refined model with the highest residual predictive deviation of 2.12. A t-test verified a high congruence between results obtained by calibration models and the reference Kjeldahl method. This study demonstrated the promise of Fourier-transform mid-infrared photoacoustic spectroscopy for the determination of nitrogen in rapeseeds and the applicability of independent components for multivariate calibration.     

beta-Correction as a preprocessing method for partial least squares in simultaneous determination of zinc and lead

An error analysis of predicted values using spectral correction matrix and partial least squares (PLS) modeling is applied for the determination of Zn²⁺ and Pb²⁺ with methylthymol blue (MTB) as a metallochromic indicator. The concentration ranges for Pb²⁺ and Zn²⁺ in standard solution sets are 0.5-5.2 and 0.1-2.5 μg ml⁻¹, respectively. The experimental calibration set was composed of 20 sample solutions using a random design for two component mixtures. The absorption spectra were recorded from 400 to 700 nm. The two wavelengths, which exert the minimum error in prediction of two metal ion concentrations, are chosen according to an error analysis of different pairs of wavelengths. The effect of the pH on the sensitivity in determination of Zn²⁺ and Pb²⁺ using MTB was studied in order to choose the optimum pH (pH=6) for determination. The values of root mean square difference (RMSD) for lead and zinc using β-correction partial least squares were 0.0977 and 0.1266, respectively. The effect of diverse ions and several experimental parameters were studied. The method was used for the determination of lead and zinc in alloy samples.     

Characterization of Gasoline by 1H Nuclear Magnetic Resonance and Chemometrics

Automotive fuel adulteration is an old and significant problem. One common type of fuel adulteration is the addition of diesel to gasoline. Unsupervised models were developed through hierarchical cluster and principal component analysis models. Supervised models through partial least square discriminant analysis using ¹H nuclear magnetic resonance spectra as the input were used to classify samples as adulterated or unadulterated. Quantitative models were developed using partial least squares to determine the gasoline and diesel concentrations in the samples. This set contained samples composed of pure gasoline and anhydrous ethanol reproducing commercial gasoline and other samples treated with diesel. Hierarchical cluster and principal component analysis did not distinguish between adulterated and unadulterated samples except for the most adulterated materials. However, partial least square discriminant analysis classified 100% of the samples correctly. The partial least square algorithm provided excellent regression models for the gasoline and diesel content. The determination coefficient was 0.9920 for both models, whereas the root mean square error of cross-validation and root mean square error of prediction for the diesel model were 2.32 and 1.42%, respectively, and 2.40 and 1.38% for the gasoline model.     

Sample classification for improved performance of PLS models applied to the quality control of deep-frying oils of different botanic origins analyzed using ATR-FTIR spectroscopy

The selection of an appropriate calibration set is a critical step in multivariate method development. In this work, the effect of using different calibration sets, based on a previous classification of unknown samples, on the partial least squares (PLS) regression model performance has been discussed. As an example, attenuated total reflection (ATR) mid-infrared spectra of deep-fried vegetable oil samples from three botanical origins (olive, sunflower, and corn oil), with increasing polymerized triacylglyceride (PTG) content induced by a deep-frying process were employed. The use of a one-class-classifier partial least squares-discriminant analysis (PLS-DA) and a rooted binary directed acyclic graph tree provided accurate oil classification. Oil samples fried without foodstuff could be classified correctly, independent of their PTG content. However, class separation of oil samples fried with foodstuff, was less evident. The combined use of double-cross model validation with permutation testing was used to validate the obtained PLS-DA classification models, confirming the results. To discuss the usefulness of the selection of an appropriate PLS calibration set, the PTG content was determined by calculating a PLS model based on the previously selected classes. In comparison to a PLS model calculated using a pooled calibration set containing samples from all classes, the root mean square error of prediction could be improved significantly using PLS models based on the selected calibration sets using PLS-DA, ranging between 1.06 and 2.91% (w/w).     

Characterization of Paris polyphylla var. yunnanensis by Infrared and Ultraviolet Spectroscopies with Chemometric Data Fusion

Paris polyphylla var. yunnanensis has been used for its anti-tumor, anthelmintic, and hemostatic properties. In this investigation, Fourier transform infrared and ultraviolet spectroscopy combined with chemometrics were used for qualitative analysis of P. polyphylla var. yunnanensis from different geographical origins in Yunnan Province. A total of 82 samples for each region were divided into 57 in the calibration set and 25 in the validation set by Kennard–Stone algorithm. Support vector machine and partial least square discrimination on the basis of Fourier transform infrared, ultraviolet, and low- and mid-level data fusion were investigated. Different pretreatments were compared for the appropriate model. The results indicated that the combination of Savitzky–Golay (11 points), second derivative, and standard normal variation has the best performance for support vector machine and partial least square discrimination with the lowest root mean square error of estimation and root mean square error of cross validation and the highest cross validation accuracy rate. The accuracies of calibration and validation for mid-level data fusion in the model of support vector machine were 84.21 and 96% for the partial least square discrimination values of 96.49 and 84%, which was better performance than a single technique or low-level data fusion for the classification. Moreover, the chemical information of sample collected from Kunming and Xishuangbanna was distinguishable from the others. These results provide a rapid and robust strategy for quality control of P. polyphylla var. yunnanensis for further analysis.     

Near-infrared spectroscopic determination of human serum albumin, γ-globulin, and glucose in a control serum solution with searching combination moving window partial least squares

Near-infrared (NIR) spectra in the region of 5000-4000 cm⁻¹ with a chemometric method called searching combination moving window partial least squares (SCMWPLS) were employed to determine the concentrations of human serum albumin (HSA), γ-globulin, and glucose contained in the control serum IIB (CS IIB) solutions with various concentrations. SCMWPLS is proposed to search for the optimized combinations of informative regions, which are spectral intervals, considered containing useful information for building partial least squares (PLS) models. The informative regions can easily be found by moving window partial least squares regression (MWPLSR) method. PLS calibration models using the regions obtained by SCMWPLS were developed for HSA, γ-globulin, and glucose. These models showed good prediction with the smallest root mean square error of predictions (RMSEP), the relatively small number of PLS factors, and the highest correlation coefficients among the results achieved by using whole region and MWPLSR methods. The RMSEP values of HSA, γ-globulin, and glucose yielded by SCMWPLS were 0.0303, 0.0327, and 0.0195 g/dl, respectively. These results prove that SCMWPLS can be successfully applied to determine simultaneously the concentrations of HSA, γ-globulin, and glucose in complicated biological fluids such as CS IIB solutions by using NIR spectroscopy.     

Cellulose I crystallinity determination using FT–Raman spectroscopy: univariate and multivariate methods

Two new methods based on FT–Raman spectroscopy, one simple, based on band intensity ratio, and the other using a partial least squares (PLS) regression model, are proposed to determine cellulose I crystallinity. In the simple method, crystallinity in cellulose I samples was determined based on univariate regression that was first developed using the Raman band intensity ratio of the 380 and 1,096 cm^?1 bands. For calibration purposes, 80.5% crystalline and 120-min milled (0% crystalline) Whatman CC31 and six cellulose mixtures produced with crystallinities in the range 10.9–64% were used. When intensity ratios were plotted against crystallinities of the calibration set samples, the plot showed a linear correlation (coefficient of determination R ² = 0.992). Average standard error calculated from replicate Raman acquisitions indicated that the cellulose Raman crystallinity model was reliable. Crystallinities of the cellulose mixtures samples were also calculated from X-ray diffractograms using the amorphous contribution subtraction (Segal) method and it was found that the Raman model was better. Additionally, using both Raman and X-ray techniques, sample crystallinities were determined from partially crystalline cellulose samples that were generated by grinding Whatman CC31 in a vibratory mill. The two techniques showed significant differences. In the second approach, successful Raman PLS regression models for crystallinity, covering the 0–80.5% range, were generated from the ten calibration set Raman spectra. Both univariate-Raman and WAXS determined crystallinities were used as references. The calibration models had strong relationships between determined and predicted crystallinity values (R ² = 0.998 and 0.984, for univariate-Raman and WAXS referenced models, respectively). Compared to WAXS, univariate-Raman referenced model was found to be better (root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) values of 6.1 and 7.9% vs. 1.8 and 3.3%, respectively). It was concluded that either of the two Raman methods could be used for cellulose I crystallinity determination in cellulose samples.     

Rapid Simultaneous Determination of Andrographolides in Andrographis paniculata by Near-Infrared Spectroscopy

The potential of near-infrared spectroscopy (NIRS) for the quality control of traditional Chinese medicine has been evaluated. Seven quantitative parameters, andrographolide, deoxyandrographolide, dehydroandrographolide, neoandrographolide, moisture, ash content, and alcohol-soluble extract of Andrographis paniculata, were evaluated by NIRS. The reference values of andrographolides were determined by high-performance liquid chromatography, and the others were obtained using the standard methods of the 2015 Chinese Pharmacopoeia. The predicted values were determined by a quantitative model using NIRS based on partial least square regression. Different spectral preprocessing methods, spectral ranges, and optimum number of factors were selected to optimize the models. All models were estimated by the combination of various parameters, including the correlation coefficient of calibration for andrographolide, deoxyandrographolide, dehydroandrographolide, neoandrographolide, moisture, ash content, alcohol-soluble extract (values of 0.980, 0.984, 0.989, 0.983, 0.987, 0.988, 0.979, respectively), root mean square error of calibration (values of 0.156, 0.038, 0.050, 0.029, 0.604, 0.431, 0.135, respectively), root mean square error of prediction (values of 0.169, 0.041, 0.050, 0.033, 0.280, 0.493, 0.140, respectively), root mean square error of cross-validation (values of 0.626, 0.114, 0.158, 0.046, 1.145, 0.774, 0.508, respectively), and ratio of standard deviation to standard error of prediction (values of 4.583, 4.690, 4.796, 4.899, 4.899, 4.690, 5.099, respectively). The results show that the calibration models by NIRS are reliable and can be applied for the quantification for seven parameters from A. paniculata for quality control in traditional Chinese medicine production and processing.     

Rapid Measurement of Cellulose,Hemicellulose, and Lignin Content in Sargassum horneri by Near-Infrared Spectroscopy and Characteristic Variables Selection Methods

Near-infrared (NIR) spectroscopy and characteristic variables selection methods were used to develop a quick method for the determination of cellulose, hemicellulose, and lignin contents in Sargassum horneri. Calibration models for cellulose, hemicellulose, and lignin in Sargassum horneri were established using partial least square regression methods with full variables (full-PLSR). The PLSR calibration models were established by four characteristic variables selection methods, including interval partial least square (iPLS), competitive adaptive reweighted sampling (CARS), correlation coefficient (CC), and genetic algorithm (GA). The results showed that the performance of the four calibration models, namely iPLS-PLSR, CARS-PLSR, CC-PLSR, and GA-PLSR, was better than the full-PLSR calibration model. The iPLS method was best in the performance of the models. For iPLS-PLSR, the determination coefficient (R²), root mean square error (RMSE), and residual predictive deviation (RPD) of the prediction set were as follows: 0.8955, 0.8232%, and 3.0934 for cellulose, 0.8669, 0.4697%, and 2.7406 for hemicellulose, and 0.7307, 0.7533%, and 1.9272 for lignin, respectively. These findings indicate that the NIR calibration models can be used to predict cellulose, hemicellulose, and lignin contents in Sargassum horneri quickly and accurately.     

Application of genetic algorithm‐support vector regression (GA‐SVR) for quantitative analysis of herbal medicines

In this paper, a genetic algorithm‐support vector regression (GA‐SVR) coupled approach was proposed for investigating the relationship between fingerprints and properties of herbal medicines. GA was used to select variables so as to improve the predictive ability of the models. Two other widely used approaches, Random Forests (RF) and partial least squares regression (PLSR) combined with GA (namely GA‐RF and GA‐PLSR, respectively), were also employed and compared with the GA‐SVR method. The models were evaluated in terms of the correlation coefficient between the measured and predicted values (Rp), root mean square error of prediction, and root mean square error of leave‐one‐out cross‐validation. The performance has been tested on a simulated system, a chromatographic data set, and a near‐infrared spectroscopic data set. The obtained results indicate that the GA‐SVR model provides a more accurate answer, with higher Rp and lower root mean square error. The proposed method is suitable for the quantitative analysis and quality control of herbal medicines. Copyright © 2012 John Wiley & Sons, Ltd.     

近红外光谱技术定量分析连作滁菊土壤中的阿魏酸含量

应用近红外光谱(NIRS)技术定量分析连作滁菊土壤样品中阿魏酸的含量.通过标准杠杆值、学生残差和马氏距离判断异常光谱,经二阶导数和Norris平滑滤噪预处理后,在6000~4000 cm-1范围,最佳因子数为7,采用偏最小二乘法(PLS)构建数学模型.结果表明,模型校正集和验证集与高效液相色谱仪(HPLC)测定的参考值之间均呈现良好相关关系,校正相关系数Rc为0.9914,交叉验证相关系数Rcv为0.9935,校正集误差均方根(RMSEC)为0.484,预测误差均方根(RMSEP)为0.539,交叉验证误差均方根(RMSECV)为0.615.研究结果表明,NIRS分析技术能够实现连作土壤中阿魏酸的快速检测,结果准确可靠.     

烟草灰分、总挥发酸和总挥发碱的近红外光谱分析

应用偏最小二乘法(PLS)结合近红外光谱(NIR)对烟草灰分(ash)、总挥发酸(TVA)和总挥发碱(TVB)建立校正模型。烟草灰分、总挥发酸和总挥发碱模型相关系数分别为0.97312、0.96220和0.98050;均方预测残差(RMSECV)分别为0.41227、0.00688和0.09790;预测范围分别为1.74~31.31、0.0570~0.2336和0.042~1.136;通过对模型进行t-检验,在显著性水平大于0.05的条件下,其预测结果与行业标准方法的测定结果对比,结果令人满意。     

Quantification of chlorpheniramine maleate enantiomers by ultraviolet spectroscopy and chemometric methods

Chlorpheniramine maleate (CLOR) enantiomers were quantified by ultraviolet spectroscopy and partial least squares regression. The CLOR enantiomers were prepared as inclusion complexes with β-cyclodextrin and 1-butanol with mole fractions in the range from 50 to 100%. For the multivariate calibration the outliers were detected and excluded and variable selection was performed by interval partial least squares and a genetic algorithm. Figures of merit showed results for accuracy of 3.63 and 2.83% (S)-CLOR for root mean square errors of calibration and prediction, respectively. The ellipse confidence region included the point for the intercept and the slope of 1 and 0, respectively. Precision and analytical sensitivity were 0.57 and 0.50% (S)-CLOR, respectively. The sensitivity, selectivity, adjustment, and signal-to-noise ratio were also determined. The model was validated by a paired t test with the results obtained by high-performance liquid chromatography proposed by the European pharmacopoeia and circular dichroism spectroscopy. The results showed there was no significant difference between the methods at the 95% confidence level, indicating that the proposed method can be used as an alternative to standard procedures for chiral analysis.     

Simultaneous Determination of Eight Bioactive Components of Radix Dipsaci by Near-infrared Spectroscopy

A new method was developed using Fourier transform near-infrared spectroscopy and high-performance liquid chromatography with diode array detection for the identification and determination of eight major compounds in crude and sweated Radix Dipsaci. Partial least square regression was selected for the analysis. Multiplicative scatter correction, first derivative, and a Savitzky–Golay filter were used for the spectral pretreatment of the crude material, while standard normal variation, first derivative, and the Savitzky–Golay filter were used for the sweated samples. The correlation coefficients of the calibration models were above 0.99 and the root mean square error of calibration, the root mean square error of prediction, and root mean square error of cross-validation were under 0.63. The developed models were used to analyze unknown crude and sweated Radix Dipsaci with satisfactory results. The established methods were rapid, simple, nondestructive, and useful for quality control of Radix Dipsaci.     

Direct determination of polymerized triglycerides in deep-frying olive oil by attenuated total reflectance–Fourier transform infrared spectroscopy using partial least squares regression

A partial least squares (PLS) regression model based on attenuated total reflectance–Fourier transform infrared spectra of heated olive oil samples has been developed for the determination of polymerized triacylglycerides (PTGs) generated during thermal treatment of oil. Three different approaches for selection of the spectral regions used to build the PLS model were tested and compared: (1) variable selection based on expert knowledge, (2) uninformative variable elimination PLS, and (3) interval PLS. Each of the three variable selection methods provided PLS models from heated olive oil samples with excellent performance for the prediction of PTGs in fried olive oils with comparable model statistics. However, besides a high coefficient of determination (R ² of 0.991) and low calibration, validation, and prediction errors of 1.14%, 1.21%, and 1.40% w/w, respectively, variable selection based on expert knowledge gave additionally almost identical low calibration (−0.0017% w/w) and prediction (−0.0023% w/w) bias. Furthermore, it was verified that the determination of PTGs was not influenced by the type of foodstuff fried in the olive oil.     

Genetic Algorithm Applied to Selection of Wavelength in Partial Least Squares for Simultaneous Spectrophotometric Determination of Nitrophenol Isomers

Abstract

Ternary mixtures of nitrophenol isomers have been simultaneously determined in synthetic and real matrix by application of genetic algorithm and partial least squares model. All factors affecting the sensitivity were optimized and the linear dynamic range for determination of nitrophenol isomers found. The simultaneous determination of nitrophenol mixtures by using spectrophotometric methods is a difficult problem, due to spectral interferences. The partial least squares modeling was used for the multivariate calibration of the spectrophotometric data. A genetic algorithm is a suitable method for selecting wavelength for PLS calibration of mixtures with almost identical spectra without loss prediction capacity. The experimental calibration matrix was designed by measuring the absorbance over the range 300–520 nm for 21 samples of 1–20 µg mL^?1, 1–20 µg mL^?1, and 1–10 µg mL^?1 of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol, respectively. The root mean square error of prediction for m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol with genetic algorithms and without genetic algorithms were 0.3732, 0.5997, 0.3181 and 0.7309, 0.9961, 1.0055, respectively. The proposed method was successfully applied for the determination of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol in synthetic and water samples.