Glucose Biosensor Based on Oxygen Electrode Part IV: In Vivo Evaluation of the Rechargeable Glucose Sensor

Abstract

A glucose monitoring system consisting of a pair of amperometric sensors: a glucose biosensor based on oxygen electrode and an oxygen sensor, two miniature potentiostats, an instrumentation amplifier and a data logger has been developed. The glucose sensor has linear response to the glucose concentration in vitro at 37°C up to 26 mM (480 mg/dL) in the phosphate buffer solution (pH 7.4), and linear range up to 21 mM (380 mg/dL) in undiluted bovine plasma. The system was evaluated in vivo with the sensors subcutaneously implanted in healthy mongrel dogs. During the implantation the system output was continuously recorded. The results of short-term subcutaneous implantation of the integrated system demonstrated good agreement between the glucose concentration measured by the biosensor and that obtained using standard glucose determination methods. The delay-time between the tissue glucose level (measured by the biosensor) and the blood glucose level (obtained by standard methodology) was 3 to 10 minutes. During the chronic implantation the biosensor was refilled in vivo. Rejuvenation of the sensor response after refilling was observed demonstrating the potential of such sensors for long-term implantation.     

A Novel Chronoimpedimetric Glucose Sensor in Real Blood Samples Modified by Glucose‐imprinted Pyrrole‐Aminophenylboronic Acid Modified Screen Printed Electrode

In this study, a molecularly imprinted sensor technology is engineered to detect glucose in real blood samples by chronoimpedimetrically. The imprinting process of glucose (Glc) was carried out by electrochemical polymerization of aminophenylboronic acid (APBA) and pyrrole (Py) by performing cyclic voltammetry (CV). Afterwards, glucose molecule was removed from imprinted surface by 5 % acetic acid to reveal glucose imprinted cavities. Electrochemical Impedance Spectroscopy (EIS) was used to characterize sensor modification steps and glucose removal. Glucose monitoring process was carried out chronoimpedimetrically(CI) for the first time in real blood samples. Calibration curve was prepared between 20–800 mg/dL. The standard deviations of the 18 calibration curves R² were calculated as 0.9866±0.0066 to assess reproducibility. Recovery was calculated by using 105 mg/dL Glc Serum Sample, which was monitored by auto analyzer and into this sample 50 mg/dL Glc added and our sensor response was 147.92±2.43 mg/dL, 98.6±1.62 % (n=5). Non‐imprinted (NIP) sensor gave no signal for the glucose concentration.     

Determination of Total Nitrogen in Environmental Samples: Validation by Comparison of Techniques and Intralaboratory Studies

Abstract

A rapid, microwave-based extraction method was employed to oxidize all forms of nitrogen to nitrate in environmental samples using persulfate. The digest was then analyzed spectrophotometrically after an offline reduction of nitrate to nitrite using a cadmium reductor column was completed. The precision of the method was tested at the 0.5 mg l^?1 level and was 5.2% (N = 10). The detection limit based on S/N = 3 was calculated to be 0.15 mg l^?1. The method was thoroughly validated by comparison of analytical techniques and intralaboratory comparison studies.     

Amperometric determination of total cholesterol in serum with use of immobilized cholesterol esterase and cholesterol oxidase

Cholesterol esterase and cholesterol oxidase were immobilized on octyl-agarose gel, activated with cyanogen bromide and placed in a reactor. The sensor system for total cholesterol was assembled with the immobilized enzyme reactor, a hydrogen peroxide electrode and a peristaltic pump. Characteristics of the sensor system were investigated by using cholesterol palmitate as a standard substrate. A linear relationship was obtained between peak current and cholesterol palmitate concentration below 1000 mg dl^-1 (10.3 mM). A 10-μl sample could be assayed in 5 min. Total cholesterol in human serum was determined in the range 100–400 mg dl^-1. The standard deviation for the determination of 50 samples of 300 mg dl^-1 was 6 mg dl^-1 (2%). The system was used for 300 assays without loss of enzymatic activity. The correlation coefficient was 0.94 for 27 samples of human sera analyzed by the system proposed and by the conventional chemical method.     

Simultaneous electrochemical determination of nitrate and nitrite in aqueous solution using Ag-doped zeolite-expanded graphite-epoxy electrode

In this work a new electrochemical sensor based on an Ag-doped zeolite-expanded graphite-epoxy composite electrode (AgZEGE) was evaluated as a novel alternative for the simultaneous quantitative determination of nitrate and nitrite in aqueous solutions. Cyclic voltammetry was used to characterize the electrochemical behavior of the electrode in the presence of individual or mixtures of nitrate and nitrite anions in 0.1 M Na₂SO₄ supporting electrolyte. Linear dependences of current versus nitrate and nitrite concentrations were obtained for the concentration ranges of 1-10 mM for nitrate and 0.1-1 mM for nitrite using cyclic voltammetry (CV), chronoamperometry (CA), and multiple-pulsed amperometry (MPA) procedures. The comparative assessment of the electrochemical behavior of the individual anions and mixtures of anions on this modified electrode allowed determining the working conditions for the simultaneous detection of the nitrite and nitrate anions. Applying MPA allowed enhancement of the sensitivity for direct and indirect nitrate detection and also for nitrite detection. The proposed sensor was applied in tap water samples spiked with known nitrate and nitrite concentrations and the results were in agreement with those obtained by a comparative spectrophotometric method. This work demonstrates that using multiple-pulse amperometry with the Ag-doped zeolite-expanded graphite-epoxy composite electrode provides a real opportunity for the simultaneous detection of nitrite and nitrate in aqueous solutions.     

DNA sensor: A novel electrochemical gene detection method using carbon electrode immobilized DNA probes

Abstract

The authors have developed a novel, rapid, convenient, and specific gene detection method, named the ‘DNA sensor,’ using a graphite electrode loaded with DNA probes. Synthesized oligonucleotide (5-TGCAGTTCCGGTGGCTGATC-3′) complementary to oncogene v-myc was employed for a model probe. The oligonucleotide was chemically adsorbed on a basal plane pyrolytic graphite (BPPG) electrode. The sensor was able to be applied to a hybridization reaction (40°C) in a linearized pVM623 solution carrying the Pst I fragment of v-myc (1.5 kbp).

After the hybridization reaction, the sensor was immersed into an acridine orange solution (1 μM) and washed with a phosphate buffer (pH 7.0). Acridine orange intercalated between base pairs of the formed double stranded DNAs on the electrode. The anodic peak potential of acridine orange that interacted with the DNAs on the electrode was measured. The positive shift of the peak potential increased in proportional to the pVM623 concentration in the hybridization reaction. 10^?1 g/ml of pVM623 was able to be detected in the buffer solution using the sensor. This gene detection was completed within an hour.     

Determination of Imidacloprid Based on the Development of a Glassy Carbon Electrode Modified with Reduced Graphene Oxide and Manganese (II) Phthalocyanine

An electrochemical sensor of glassy carbon electrode modified with reduced graphene oxide and manganese (II) phthalocyanine (GCE/rGO/MnPc) was developed as an effective alternative in the determination of imidacloprid in honey samples. The peak current variation obtained with the proposed sensor, in the presence of imidacloprid, was higher compared to the bare GCE. The followed experimental conditions were optimized: reduced graphene oxide concentration (2.0 mg mL^?1), manganese (II) phthalocyanine concentration (1.5 mg mL^?1), electrolyte pH (6.5) and electrolyte concentration (1,50 mol L^?1). The study also showed that the process of reduction of imidacloprid is irreversible and diffusion‐controlled, with a single reduction peak of approximately ?0.9 V corresponding to the reduction of the nitro group (?NO2) present in the structure, generating a derived from hydroxylamine, in a process involving about four electrons. The determination of imidacloprid in honey samples exhibited recovery values within the EPA range (between 90.5 and 101.9 %). The proposed sensor GCE/rGO/MnPc can be used as an effective alternative in the determination of imidacloprid in honey samples.     

Synthesis and Herbicidal Activity of Muti‐Substituted Pyrido[4,3‐d]pyrimidin‐4‐ones

A series of novel muti‐substituted pyrido[4,3‐d]pyrimidin‐4‐one derivatives 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j , 5k , 5l were designed and synthesized by the muti‐step reaction. N,S‐acetal 1 reacted with acetyl acetamide in the presence of zinc nitrate to obtain muti‐substituted pyridine 2 , which reacted with triethyl orthoformate to give 8‐cyano‐5‐methyl‐7‐methylthio‐pyrido[4,3‐d]pyrimidin‐4‐one 3 ; the target compounds 5 were obtained in good yields by the oxidation of 3 with H₂O₂ in a catalytic amount of sodium tungstate then by the substitution with various substituted phenols. Their structures were confirmed by IR, ¹H NMR, EI‐MS, and elemental analyses. The preliminary bioassay indicated that some of them displayed moderate herbicidal activity against dicotyledonous weed Brassica campestris L. at the concentration of 100 mg/L. For example, compounds 5a , 5f , and 5g possessed 76.0%, 62.7%, and 60.2% inhibition against B. campestris at the concentration of 100 mg/L. Moreover, 5a exhibited 58.2% inhibition against B. campestris at the concentration of 10 mg/L.     

Determination of benzoate,sorbate, citrate and orthophosphate ions in beverage samples using two-dimensional isotachophoretic method

A two-dimensional capillary isotachophoretic method (cITP-cITP) using electrolyte system consisting of leading electrolytes (LE1): [10 mM HCl + β-alanine (pH 3.9) + 0.1% hydroxyethylcellulose (HEC)] and (LE2): [10 mM HCl + aminocaproic acid (pH 5.00) + 0.1% HEC], and 5 mM caproic acid as terminating electrolyte (TE) was studied. Two methods of detection, conductometric and UV-Vis, were applied to the determination of selected food preservatives and additives. Practical applicability was demonstrated by simultaneous determination of benzoates, sorbates, citrates and orthophosphates in 12 samples of beverages. The proposed method revealed linearity with R ² between 0.9992 and 0.9999 for the concentration ranges: 10–100 mg/L (orthophosphate and citrate ions), 20–100 mg/L (sorbates) and 40–120 mg/L for benzoates. The detection limits for all studied ions were from 0.85 to 3.1 mg/L whereas the quantification ones were from 2.8 to 10 mg/L. The variation coefficients for five-fold analysis of all ions ranged between 0.4 and 9.1%. Obtained recoveries (from 97 to 104%) confirmed satisfactory accuracy of the proposed cITP-cITP method for the determination of tested food additives.     

A Highly Sensitive Method for Determination of Copper (II) in Water Samples for Field Screening

Abstract

A new method has been developed for field screening of copper (II) in water samples, which is based on an enzyme inhibition reaction between copper (II) and nitrate reductase. The concentration of copper (II) was acquired by indirect determination the reaction product (nitrite) with a mini optical reflection sensor. Under the optimum conditions, the calibration graph was linear in the range of 5.0–50 ng mL^?1. The limit of detection was 0.5 ng mL^?1. This method has been used for the field screening of copper (II) with satisfactory results.     

Denitrification and removal of heavy metals from waste water by immobilized microorganisms

Pseudomonas fluorescens, immobilized on soft polyvinyl chloride granules containing up to 35% softeners as carbon source, was used for simultaneous removal of nitrate and heavy metals. In typical continuous column operation, a 100 mg/L nitrate input solution was reduced to a 20 mg/L output at a feeding rate of 1500 mL/h, with a capacity of 14 kg/day/m³, and with an efficiency of 79%. In the same column, Pb(NO₃)₂ concentration was reduced from 1.0 to 0.05−0.1 mg/L and ZnSO₄ concentration was reduced from 10 to 5 mg/L.Pseudomonas aeruginosa immobilized on an O₂ plasma-treated melt blown polypropylene web was used for removing 95% of a 1.7 nCi PuCl₄ activity from a nuclear plant waste water in a batch operation.     

Development of a novel nitrate-selective composite sensor based on doped polypyrrole

The manufacture and evaluation of a novel sensor built with a composite material, highly selective to nitrate ions using doped polypyrrole as a recognition agent, are presented. When the ratio of recognition agent to graphite was optimized at 1:1, and the sensitivities found closely approached nernstian behavior. The stability times attained were less than 14 min with response times also below 20 s. Batch characterization of the sensor displayed a sensitivity of 57.1 mV/decade of nitrate ion activity () and a detection limit of 5.37 × 10⁻⁵ M, which are comparable to those reported for commercial sensors. Evaluation of the selectivity coefficients showed high affinity to nitrate ion, superior to that of commercial sensors and others reported in the literature. The composite material gives the sensor a prolonged service life with the added capability of allowing the regeneration of its active surface. Coupling the sensor and a solid state, composite-type, reference electrode to a flow injection analysis system (FIA) permitted to achieve an effective overall assessment of the system. A nitrate determination test was conducted on real samples. A comparison of the results obtained, either with stationary measurements or with FIA, indicated that there were no significant differences from the values from manufacturer’s specifications.     

Antiphytopathogenic activity of Psoralea glandulosa (Fabaceae) against Botrytis cinerea and Phytophthora cinnamomi

The resinous exudate, three meroterpenes, namely bakuchiol (1), 3-hydroxybakuchiol (2), 12-hydroxyisobakuchiol (3), and one furanocoumarin, psoralen (4), were isolated from the leaves of culen (Psoralea glandulosa). In addition to these, two semi-synthetic derivatives, bakuchiol acetate (5) and bakuchiol methyl eter (6), were obtained from 1, and were subsequently evaluated in vitro for the inhibitory effect of resin and compounds on the mycelial growth of Botrytis cinerea Pers.: Fr. and Phytophthora cinnamomi Rands. The resinous exudate inhibited the mycelial growth of both the pathogens, while bakuchiol (1) exhibited an inhibitory effect on the mycelial growth of B. cinerea up to 94% at a concentration of 150 mg/L and psoralen (4) reduced the mycelial growth of P. cinnamomi up to 80% at a concentration of 150 mg/L. These compounds have the ability of blocking the development of mycelial growth and may be used as a potential biopesticide in the agricultural sector once the in vivo test results have been validated.     

Nitrate ion-selective sensor based on electrochemically prepared conducting polypyrrole films

Nitrate-doped polypyrrole (PPy) films on a glassy carbon substrate have been prepared electrochemically in aqueous, acetonitrile, and propylene carbonate solutions for use as nitrate sensors. Lithium nitrate, sodium nitrate, nitric acid, tetraethylammonium p-toluene sulfonate (TS), and tetradodecylammonium nitrate (TDN) were employed as electrolytes. The effect of dibutylphthalate (DBP) as a plasticizer on the sensitivity and lifetime of PPy film sensors was also investigated. A Nernstian behavior with a slope of 56.9 m V/decade over 0.1–7.4 × 10⁻⁵ M NO and a detection limit of 4.7 × 10⁻⁵ M were observed for the polymer sensor prepared in acetonitrile solution containing lithium nitrate and 15% plasticizer (DBP). A lifetime of more than 6 months for this PPy film electrode was obtained.     

1,1′-Dimethylferrocene Mediated L-Glutamate Electrodes Modified With Electropolymerized 1,3-Diaminobenzene Film

Abstract

A mediated L-glutamate biosensor was constructed by incorporating 1,1′-dimethylferrocene in electropolymerized 1,3-diaminobenzene and immobilizing L-glutamate oxidase on the electropolymerized film. Stabilizers (1% DEAE-dextran, 1% MgCl₂ and 10% sucrose) were added to the immobilized enzyme to improve the long-term storage stability. The electrode responded linearly to L-glutamate concentration between 0.1 and 2.0 mM and the response of the electrode did not interfere with electroactive species and oxygen. The useful lifetime of the sensor was at least 3 weeks. When stored in dry form at 28°C, the sensor with stabilizers was stable at least 6 months. The electrode was applied to determine L-glutamate in fermentation broth samples. Good correlations were achieved between results obtained with the sensor and by enzymatic analysis using glutamate dehydrogenase.     

Monitoring Of Nitrifying Processes In Ground Water By Ion Chromatography

Abstract

The removal of ammonia from mineral medium containing known concentrations of ammonia (up to 300 mg/L) and from ground water by biological oxidation was studied. Nitrifying bacteria were isolated from ground water containing ammonia.

Ammonium ion was determined by a standard titration technique while nitrite and nitrate ions were determined by ion chromatography (IC Supersep anion column) using 1.5 mM phtalic acid solution containing 5 % acetonitril as eluent.

Depending on its concentration in water biooxidation of ammonia lasted from 48 hours till three weeks.     

Determination of chlorinated hydrocarbons in water by fiber-optic evanescent wave spectroscopy and partial least-squares regression

An application of the multivariate calibration technique of partial least-squares (PLS) regression to near-infrared spectra of a fiber-optic sensor based on the evanescent wave principle is presented. The sensing element consists of a quartz glass fiber with a silicone cladding which enriches nonpolar water contaminants. Due to the interaction of the extracted molecules with the part of the light which is transmitted in the evanescent wave zone of the cladding, absorbance spectra of the contaminants can be collected. In view of a sensor application for in-situ environmental analysis, aqueous solutions of chlorinated hydrocarbon solvents (CHS), which often can be found as major water contaminants, have been measured. PLS regression was applied to three sets of CHS samples, representing typical features of NIR evanescent wave spectral data. These are, e.g., strong overlapping of the absorption bands of different CHS components, peak distortions due to temperature variations between reference and sample measurement and noisy data at analyte concentrations near to the limit of detection, respectively. For trichloroethene and 1,1-dichloroethene, where the calibration model was built for samples within a small concentration range of 1–9 mg l^–1, satisfactory prediction results could be obtained with a relatively small root-mean-square error of 0.3 mg l^–1 compared to analytical reference measurements. In contrast to this, for a three component system of dichloromethane, trichloromethane and trichloroethene with strongly overlapping absorption bands, where samples over a very broad concentration range from 3–4940 mg l^–1 were included in the PLS model, the prediction accuracy decreased enormously and for some samples strong deviations between real and predicted data occurred. Nevertheless, applying multivariate calibration to this difficult system with similar spectral features and huge differences in the concentration of the species allowed an acceptable spectral distinction and at least a semi-quantitative determination of the CHS species.     

A new indole-type alkaloid from the roots of Clematis florida var. plena

One new indole-type alkaloid, α-L-rhamnopyranosyl-(1→6)-β-D- glucopyranosyl 6-methoxy-3-indolecarbonate (1), together with three known alkaloids (2–4), one aromatic acid (5) and five known saponins (6–10), was isolated from the roots of Clematis florida var. plena. Their structures were established by NMR spectroscopic analysis and acid hydrolysis. In in vivo anti-inflammatory activity, n-butanol extract was found to be potent against ear edema in mice, with inhibition rate of 48.7% at a dose of 800?mg/kg. Furthermore, compounds 8 and 9 obtained from the n-butanol extract exhibited significant anti-inflammatory activities with inhibition rates of 50.9% and 54.7% at a dose of 200?mg/kg.     

Previously undescribed benzoxepins with bioactivities against inducible pro-inflammatory cyclooxygenase and lipoxygenase from Rhizophora annamalayana Kathir

Two unprecedented benzoxepins were obtained from the ethyl acetate fraction of the leaves of Rhizophora annamalayana Kathir, and characterized as 4-(11-(hydroxymethyl)-10-methylpentan-2-yl)-4, 5-dihydrobenzo[c]oxepin-1(3H)-one (1) and (E)-methyl-14-hydroxy-4-(11-(5-hydroxy-1-oxo-3,4,5-tetrahydrobenzo[c]oxepin-4-yl)ethyl)-10-methylhept-11-enoate (2). The benzoxepin 2 exhibited greater 1, 1-diphenyl-2-picrylhydrazyl and 2, 2′-azino-bis-3 ethylbenzothiozoline-6-sulfonic acid diammonium radical scavenging assays (IC₅₀ 0.68 and 0.84 mg/mL, respectively) than those recorded with 1 (IC₅₀ 0.70 and 0.89 mg/mL, respectively). The tetrahydrobenzo[c]oxepin analogue (2) exhibited significantly great cyclooxygenase-2 and 5-lipoxygenase inhibitory properties (IC₅₀ 0.87 and 0.94 mg/mL, respectively), while compared with its dihydrobenzo[c]oxepin-1(3H)-one isoform (1) (IC₅₀ 1.16 and 1.64 mg/mL, respectively). The dihydrobenzo[c]oxepin-1(3H)-one isoform (2) exhibited significantly greater selectivity index (~2) than synthetic ibuprofen (0.44) (p < 0.05), which attributed the higher anti-inflammatory selectivity of the former against inducible pro-inflammatory cyclooxygenase-2 than its constitutive isoform (cyclooxygenase-1). No significant difference in 5-lipoxygenase (5-LOX) inhibitory activities were apparent between compound 2 (IC₅₀ 0.94 mg/mL) and synthetic ibuprofen (IC₅₀ 0.93 mg/mL).     

Development of non-enzymatic strip for simple and selective determination of urea in water and biological samples

A simple and selective method for the determination of urea based on the paptode technique is described. The sensor was constructed by immobilizing an ionophore on a TLC strip. The procedure is based on the nucleophilic displacement of urea with tetrachloro-p-benzoquinone (chloranil) as an ionophore, and the formed violet-color product was detected using a flatbed scanner. The color of each spot was analyzed to red (R), green (G) and blue (B) values from 0 to 255 using a program written in visual basic (VB) programming language. The calibration graph obtained with the proposed sensor was linear over the range of 0.05?C10.00?mg?L^?1 with a detection limit of 0.01?mg?L^?1 for urea. Parameters such as pH and concentration of chloranil were optimized. The proposed sensor was successfully applied for the determination of urea in bovine serum, urine and tap water samples.