Melt Viscosity Characteristics of Ethylene-Acrylic Acid-Acrylamide Terpofymer

Abstract

Melt index and melt viscosity measurements have been made on a series of ethylene-acrylic acid-acrylamide terpolymers. The terpolymers were prepared from a 2000 melt index ethylene-methyl acrylate copolymer and synthesis conditions were adjusted such that the polar groups varied from pure acid to pure amide to pure salt. Results of these measurements indicated the following order of melt viscosities at 190°C: 50% acid-50% amide < 100% amide < 100% acid < 33 1/3% acid amide-salt < 50% salt-50% amide < 50% salt-50% acid ? 100% salt. This order apparently arises because of the complex inter- and intramolecular hydrogen bonding and ionic bonding forces that exist in these systems.     

Rapid Amino Acid Analysis in Biotechnology: Determination of Alanine and Aspartic Acid

Abstract

A fast and sensitive chromatographic method was developed to monitor the enzymatic conversion of aspartic acid into alanine in a membrane reactor. The amino acids were converted into dansyl derivatives which were separated by ion-pair chromatography on a reversed-phase column and detected by fluorimetry using only conventional HPLC equipment.     

Mechanisms for the Formation of Diamides and Polyamides by Aminolysis of d‐Glucaric Acid Esters

¹H and ¹³C NMR were employed to chart the conversion of the five‐membered lactone esters methyl d‐glucarate 1,4‐lactone (1) and ethyl d‐glucarate 6,3‐lactone (5) to N,N′‐dipropyl‐d‐glucaramide with n‐propylamine in DMSO‐d₆. These experiments were carried out to model the amide forming steps in polycondensation reactions between esterified d‐glucaric acid and diamines to give poly(d‐glucaramides). It was clear from the resulting NMR spectra that the lactones 1 and 5 were each converted in three consecutive steps to the product diamides; aminolysis of the lactone ester to the corresponding acyclic N‐propyl‐d‐glucaramide monoester, followed by lactonization to a five‐membered lactone amide, and concluding with aminolyis of the lactone amide to N,N′‐dipropyl‐d‐glucaramide (4). Comparison of the reaction pathways from 1 and 5 by ¹H NMR analysis suggests that ring opening of the 1,4‐lactone ester (1) and 1,4‐lactone amide (7) is faster than ring opening of the corresponding 6,3‐lactone ester (5) and 6,3‐lactone amide (3). Aminolysis of dimethyl l‐tartrate, which cannot form a five‐membered lactone, with n‐propylamine in DMSO‐d₆ was much slower than aminolysis of esterified glucaric acid, indicating that the lactone forming/lactone aminolysis steps are the dominant aminolysis rate enhancing steps from glucarate.     

Detection of Furfural and 2-Furoic Acid in Bacterial Cultures by High Pressure Liquid Chromatography

Abstract

The Furfural and 2-furoic acid present in bacterial cultures were extracted and detected by High pressure Liquid Chromatogrphy (HPLC). Using the methanol/water solvent (70/30), the column, μ Bondapak C18 (Waters Associates) seperated these compounds well. The detection was performed at 254 nm where binary mixtures were absorbed. This method provided a rapid and simultaneous detection for the conversion of furfural into 2-furoic acid followed by the utilization of 2-furoic acid during bacterial growth.     

PHOSPHORUS PENTASULFIDE AS A MILD,SELECTIVE REAGENT FOR THE REDUCTION OF SULFOXIDES TO SULFIDES

Abstract

It has been shown that phosphorus pentasulfide (P₄S₁₀) is a mild, effective reagent for the reduction of sulfoxides to sulfides and that this conversion can be achieved selectively in the presence of other reactive groups such as ketone, ester, amide, nitro and halogen. This reagent can be used in similar fashion for the efficient reduction of sulfilimines (in both the N-p-toluenesulfonyl and free NH forms). Phosphorus pentasulfide also appears to be a promising reagent for reducing selenoxides but is ineffective in reducing sulfones, sulfinates, or sulfites. The mechanistic evidence presented indicates a probable four-centre (Wittig-like) intermediate or transition-state for the reduction by P₄S₁₀.     

Chromatographic Enantioseparation of Ten Amino Acid Amide Derivatives on Three Polysaccharide-Based Chiral Stationary Phases

Enantioseparation of ten kinds of amino acid amide derivatives bearing aniline moieties on three polysaccharide-based chiral stationary phases (CSPs) was first systematically investigated. The chromatographic experiments were performed in the normal phase mode, namely, with n-hexane and 2-propanol as mobile phase. The effects of chiral columns, concentration of 2-propanol and column temperature on the enantioseparation were studied in detail. These compounds can be well resolved on Chiralcel OD-H column with the resolution above 1.5. Enantioseparation mechanism of chiral analytes and the CSPs are proposed based on the thermodynamic analysis of the experimental data. Our study establishes a simple, fast and efficient analytical method for amino acid amide derivatives by chiral HPLC, and provides a reference for enantioseparation of chiral amino acid amide derivatives and similar chiral compounds.     

Synthesis and anion recognition studies of new ureylbenzamide-based receptors

A new group of ureylbenzamide-based receptors (1–4) has been synthesized; its binding affinity and capacity to form supramolecular complexes in solution with different anions have been investigated. For designing these receptors, it was considered a combination of the positions of the urea and amide groups (ortho and meta), and the chromophore groups naphthyl and nitrophenyl, yielding four receptors. The position and chromophore structure affected the acidity of the urea and amide hydrogens in the order 4>3>2>1. All the spectroscopic studies showed a significant change of 1 and 2 compared with 3 and 4 in the presence of different TBAX salts in acetonitrile. The ¹H-NMR spectra show a preferential interaction of the anions with the urea group in receptors 1 and 2 due to the less steric hindrance, while there is a cooperative interaction of amide group in receptors 3 and 4 due to the closeness of both groups.     

Separation of Hydroxylated Metabolites of Fatty Acids (C10-C18) on a μPorasil Silica Column Using an Isocratic HPLC System

Abstract

A simple, versatile, and rapid normal-phase isocratic HLPC system is described for the analysis of the major (omega and omega-1) metabolites of C₁₀-C₁₈ chain length fatty acids formed upon incubation with rat liver microsomes and NADPH. Quantitation was achieved by radiometric detection. Chromatographic separation was performed by elution of the fatty acids and their omega and omega-1 metabolites from a 10μ silica column (μPorasil) with hexane:2-propanol:acetic acid (96.5:2.5:1.0). Retention times for these metabolites ranged from 10 to 13 minutes for stearic acid and from 16 to 21 minutes for capric acid. Recovery of the fatty acids and their metabolites from the column was greater than 95 percent. Relative quantitative conversion of the fatty acid substrates to omega and omega-1 metabolites was in the following order: myristic acid > capric acid=lauric acid=palmitic acid ? stearic acid. The omega products were formed preferentially over the omega-1 products of all the fatty acids except lauric acid. The method proved suitable for routine determination of NADPH-dependent fatty acid hydroxylase activities in rat liver microsomes.     

Synthesis and cytotoxicity of new 2-oxo-7-phenyl-2,3-dihydrothiazolo[4,5-b]pyridine-5-carboxylic acid amides

Abstract

The synthesis and anticancer activity evaluation of new thiazolo[4,5-b]pyridine-5-carboxylic acid amides is described. The structures of the synthesized compounds were confirmed by spectroscopic data and a single crystal X-ray diffraction analysis for 2.4. The synthesized compounds were screened for their in vitro anticancer activity according to US NCI protocols. The most active 7-(4-fluorophenyl)-2-oxo-2,3-dihydrothiazolo[4,5-b]pyridine-5-carboxylic acid (4-chlorophenyl)amide 2.2 and 7-(4-chlorophenyl)-2-oxo-2,3-dihydrothiazolo[4,5-b]pyridine-5-carboxylic acid (4-chlorophenyl)amide 2.5 were screened for their cytotoxicity effects on C6 Rat glioma cells and U373 Human glioblastoma astrocytoma cells which revealed promising results comparable to temozolamide as reference control according MTT assay data.     

Thermal decomposition and hydrolysis of polyacrylamide-co-tert-butyl acrylate

Hydrolysis and thermal decomposition of polyacrylamide tert-butyl acrylate (PAtBA) copolymer were investigated. Carbon-13 nuclear magnetic resonance (¹³C NMR) spectroscopy was used to monitor the structural changes of the PAtBA. Hydrolysis of the amide groups occurred only after the complete conversion of tBA. Activation energy for the amide groups of the PAtBA was found to be 86.4 kJ/mol. Gas chromatography was used to identify gas products of the thermal decomposition of PAtBA. Gas analysis showed conclusively the formation of isobutene and carbon dioxide from the tBA groups of the copolymer. Tertiary butanol was found to be the hydrolysis product in the aqueous phase at temperatures from 60 to 130 °C. Kinetics governing the contribution of tBA and amide groups to the total degree of hydrolysis of the PAtBA is presented. An nth order equation was used to check for the hydrolysis reaction order of both the amide and the tBA groups. Analysis of ¹³C NMR spectra revealed that tBA groups were randomly distributed on the PAtBA copolymer chain.     

A case study of solid state inhibition lock opening of pyridine N-oxide in dicarboxylic acid recognition

An ethylene-linked mixed pyridine diamide receptor 1 is synthesised to study the binding with dicarboxylic acid in solid phase. In ¹H NMR, the amide proton adjacent to pyridine N-oxide shows almost negligible shift, which suggests the non-participation of the amide proton for acid binding in solution. However, in solid phase (X-ray, IR), we have found significant role of this amide proton in binding.     

New amino acid based biodegradable poly(ester amide)s via bis-azlactone chemistry

Abstract

Three new classes of the amino acid based biodegradable (AABB) polymers were synthesized via step growth polymerization of bis-azlactones and amino acid based diamine-diesters with activated fatty diester and alkylenediamine: a) poly(ester amide)s (PEAs) were obtained by polymerization of bis-azlactones with diamine-diesters, b) hydrophobically modified co-poly(ester amide)s (co-PEAs) were synthesized by copolymerization of activated fatty diacid diester and bis-azlactones with diamine-diesters, and c) poly(ester amide-co-amide)s (PEA-co-PAs) were obtained by copolymerization of alkylene diamine and diamine-diesters with bis-azlactones. The new poly(ester amide)s showed relatively low-molecular-weights (M_w within 2,800–19,600?Da, GPC in DMF), whereas the new co-poly(ester amide)s and poly(ester amide-co-amide)s exhibited high-molecular-weights (M_w within 40–100?kDa) leading to good mechanical properties. Incorporation of the bis-azlactone fragments into the poly(ester amide)s backbone increased hydrophobicity and thermal stability, whereas incorporation of diamine-diester units into the backbone of the bis-azlactone based polyamides rendered them biodegradable. Synthesized AABB polymers are potential candidates for constructing resorbable surgical and pharmaceutical devices.     

Synthesis and antibacterial activity of betulonic acid amides with piperazine derivatives

New betulonic acid amides with piperazine derivatives were synthesized by the acid-chloride method and characterized using spectral data. It was shown that synthesized compounds 2–7 exhibited varied antibacterial activity. The most active of them was betulonic acid amide of 1-(3,4-dichlorophenyl)piperazine (3) and 1-(4-trifluoromethylphenyl)piperazine (7).     

Novel and Gram‐Scale Green Synthesis of Flutamide

Isobutyric acid in the presence of cyanuric chloride and N‐methylmorpholine was converted into active ester 3 at 0–5 °C, and it was subsequently treated with 3‐aminobenzotrifluoride 4 at 25 °C to furnish corresponding amide 5. This amide finally, on nitration, produced the desired product flutamide, 2‐methyl‐N‐[4‐nitro‐3‐(trifluoromethyl)phenyl]propionamide 6 in good yield. By‐product 2,4,6‐trihydroxy‐1,3,5‐triazine 7 was converted into the useful starting material cyanuric chloride 1 by refluxing with N,N‐diethylamine and POCl₃.     

Synthesis and Evaluation of a Cyclophane Receptor for Acetic Acid

A bicyclic cyclophane ( 2 ) containing one pyridine nitrogen and four amide N-H groups oriented toward the interior of the cavity was synthesized. The binding constants of various carboxylic acids with 2 were measured by UV/Vis spectroscopy. Acetic acid bound to 2 with a K a of 980 - 90 M m 1 in chloroform while branched carboxylic acids showed significantly lower binding. The data indicate that acetic acid was bound within the cavity of 2 . Only one acetic acid binds to two control hosts, whereas 2 shows definitive 1:1 binding. The results suggest that selectivity in the binding of carboxylic acids can be achieved via size constraints dictated by the receptor cavity, and that the same size restrictions lead to only one carboxylic acid bound to the cyclophane. The crystal structure of 2 is reported.     

High Pressure Liquid Chromatographic Assay for Salicylic Acid and its Metabolites in Rat Urine

Abstract

An HPLC method for the determination of salicylic acid (SA), gentisic acid (GA), salicyluric acid (SU), and salicyl acyl glucuronide (SAG) in rat urine was developed. The method consisted of extracting SA, GA, and SU from acidified urine into 50:50 mixture of ethyl acetate and butyl chloride. Salicyl acyl glucuronide was extracted from neutral urine after conversion to salicyl hydroxamic acid with hydroxylamine. Salicyl phenolic glucuronide was estimated indirectly as the difference between total salicylate and sum of the four constituents mentioned above. Chromatographic separation was done on a C₁₈ column with U.V. detection at 310 nm using a mobile phase consisting of 5–10% acetonitrile in 3% glacial acetic acid. The extraction recovery of these compounds from spiked urine ranged from 90–108%. The detection limits were 10 μg/ml for GA, SU and SA, and 2.5 μg/ml for SHA. The method was applied to the study of salicylic acid metabolism in the rat.     

Liquid Chromatographic Characteristics of Ethylenethiourea with HPLC Carbon,Chiral, Polymer and Reverse-Phase Bonded Silica Columns

Abstract

Of the columns investigated, the graphitised carbon column provided the best chromatographic characteristics for the highly water-soluble compound ethylenethiourea (ETU). The stability of the carbon column in strongly acidic media permitted the incorporation of the phosphoric acid electrolyte into the 5% acetonitrile-in-water mobile phase. ETU eluted from the column in 200 s as a sharp symmetrical peak at a mobile phase flow rate of 1 mL/min and a column temperature of 35°C. The k' value was 1.72. ETU peak retention times and responses showed excellent repeatability with coefficients of variation of 0.28 and 1.40%, respectively, for 6 replicates with the high performance liquid chromatographic-electrochemical system using the graphitised carbon column. Although ETU eluted as a sharp symmetrical peak with the cyclodextrin chiral columns, their instability at low pH required post-column addition of the phosphoric acid electrolyte solution. ETU chromatographed poorly or degraded on the polymer columns. The chromatographic separation of ETU on the C-8 reverse-phase bonded silica column appeared to be due mainly to residual silanol groups. With the NH₂ bonded silica column ETU eluted immediately after the injection solvent.     

The Isolation of Proteins from Whey with a New Strongly Acidic Silica-Based Ion Exchanger

Abstract

A new type of strongly acidic ion exchanger based on macroporous silica coated with a thin layer of hydrophilic copolymer with sulphonic acid groups has been evaluated. The coating is crosslinked and covalently linked to the silica surface via diol groups.

The performance for isolation of proteins from whey of the new ion exchanger and Spherosil S were compared using both batchwise adsorption and column operations with reconstituted whey. Higher breakthrough capacities were observed for the new ion exchanger than for Spherosil S. Excellent column operational lifetimes were found for the new product.

A procedure is described to restore the original adsorption capacity of fouled columns.     

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded octadecyl ligands for use in reversed-phase capillary electrochromatography

A carboxy precursor monolithic column, namely poly(carboxy ethyl acrylate-co-ethylene glycol dimethacrylate) was first produced in a 100 μm i.d. fused-silica capillary and subsequently surface bonded with n-octadecyl (C₁₈) ligands by a post-polymerization functionalization process with octadecylamine in the presence of N,N´-dicyclohexylcarbodiimide. The bonding of octadecyl ligands was achieved via an amide linkage between the carboxy functions of the precursor monolith and the amino group of the octadecylamine compound. The resulting C₁₈ monolith exhibited a very low electroosmotic flow (EOF), a fact that required the incorporation of small amounts of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) in the polymerization solution to produce a precursor monolith with fixed negative charges of sulfonate groups. This may indicate that the conjugation of the carboxy functions with octadecylamine occurred to a large extent so that the amount of residual carboxy functions was sparsely dispersed and not enough to produce a desirable EOF. The EOF velocity of the C₁₈ column having fixed negative charges provided by the incorporated AMPS increased with increasing ACN content of the mobile phase signaling an increased binding of mobile phase ions to the polar amide linkages near the monolithic surface, and a decreased viscosity of the mobile phase, both of which would result in increased EOF velocity. The C₁₈ monolithic column constituted a novel nonpolar sorbent for reversed-phase capillary electrochromatography for nonpolar solutes, e.g., alkylbenzenes, alkylphenyl ketones, and polyaromatic hydrocarbons, and slightly polar compounds including phenol and chlorophenols. The C₁₈ monolithic column exhibited relatively high selectivity toward chlorophenols differing by one chloro substituent.