Spectrophotometric and spectrofluorimetric methods for analysis of acyclovir and acebutolol hydrochloride

Simple and sensitive spectrophotometric and spectrofluorimetric methods are described for analysis of acyclovir and acebutolol hydrochloride. The proposed methods are based on oxidation of the selected drugs with cerium(IV) ion in acidic medium with subsequent measurement of either the decrease in absorbance at 320nm or the fluorescence intensity of the produced cerous(III) ion at 361-363nm (excitation at 250nm). Beer's law obeyed from 2 to 8, 0.25 to 2.5microgcm-1 acyclovir, 1 to 7 and 0.25 to 2.5microgml-1 acebutolol hydrochloride, using the spectrophotometric and spectrofluorimetric method, respectively. The proposed method were successfully applied for determination of the selected drugs in their pharmaceutical preparations with good recoveries.     

Spectrophotometric and spectrofluorimetric methods for analysis of tramadol, acebutolol and dothiepin in pharmaceutical preparations

Sensitive spectrophotometric and spectrofluorimetric methods are described for the determination of tramadol, acebutolol and dothiepin (dosulepin) hydrochlorides. The two methods are based on the condensation of the cited drugs with the mixed anhydrides of malonic and acetic acids at 60 degrees C for 25-40 min. The coloured condensation products are suitable for the spectrophotometric and spectrofluorimetric determination at 329-333 and 431-434 nm (excitation at 389 nm), respectively. For the spectrophotometric method, Beer's law was obeyed from 0.5 to 2.5 microg ml(-1) for tramadol, dothiepin and 5-25 microg ml(-1) for acebutolol. Using the spectrofluorimetric method linearity ranged from 0.25 to 1.25 microg ml(-1) for tramadol, dothiepin and 1-5 microg ml(-1) for acebutolol. Mean percentage recoveries for the spectrophotometric method were 99.68+/-1.00, 99.95+/-1.11 and 99.72+/-1.01 for tramadol, acebutolol and dothiepin, respectively and for the spectrofluorimetric method, recoveries were 99.5+/-0.844, 100.32+/-0.969 and 99.82+/-1.15 for the three drugs, respectively. The optimum experimental parameters for the reaction has been studied. The validity of the described procedures was assessed. Statistical analysis of the results has been carried out revealing high accuracy and good precision. The proposed methods were successfully applied for the determination of the selected drugs in their pharmaceutical preparations with good recoveries. The procedures were accurate, simple and suitable for quality control application.     

Luminescence analysis of complex organic materials based on resolved line spectra produced by selective laser excitation

Selective methods of obtaining the resolved line spectra of the solutions of complex molecules, along with the peculiarities of these spectra, are considered. At sufficiently low temperatures (4.2 K), broad-band absorption and luminescence spectra of the solutions of organic compounds are often broadened, mainly inhomogeneously. Excitation of the luminescence by tunable lasers can eliminate this broadening. The spectra obtained consist of dozens of narrow (Δv ≈ 1 cm^-1) vibrational lines. Some examples of selective excitation for the spectrofluorimetric analysis of complex organic materials are given: identification (at the 10^-11 g ml^-1 level) and determination of individual polynuclear hydrocarbons in certain materials without preliminary separation is demonstrated by the determination of benzopyrene and perylene in gasoline and the detection of perylene in a solid paraffin.     

New spectrophotometric and spectrofluorimetric methods for the determination of angiotensin II receptor antagonists in tablets and plasma

Spectrophotometric and spectrofluorimetric methods for the determination of five Angiotensin II type 1 receptor antagonists in tablets and plasma have been developed and optimized. The spectrophotometric method involves the addition of a measured excess of bromate-bromide in HCl medium and subsequent estimation of the residual bromine by reacting with a fixed amount of methyl orange. The spectrofluorimetric method depends on the oxidation of the drugs with cerium(IV) and subsequent monitoring of the fluorescence of the induced cerium(III) at 365 nm with excitation at 255 nm. Both of the proposed methods were successfully applied to the determination of the investigated drugs in their pure forms and pharmaceutical preparations. Besides, the spectrofluorimetric method was applied to the determination of irbesartan and telmisartan in biological fluids with good accuracy and precision.     

Spectrofluorimetric study of the charge-transfer complexation of certain fluoroquinolones with 7,7,8,8-tetracyanoquinodimethane

Simple, rapid and sensitive spectrofluorimetric methods are described, for the first time, for the determination of ciprofloxacin (CIP), norfloxacin (NOR), pefloxacin (PEF) and fleroxacin (FLE). The methods are based on the charge-transfer (CT) reaction of these drugs as n-electron donors with 7,7,8,8-tetracyanoquinodimethane (TCNQ) as pi-electron acceptor. TCNQ was found to react with these drugs to produce intensely transfer reaction complexes and the fluorescence intensity of the complexes was enhanced in 21-35 fold higher than that of the studied fluoroquinolones itself. The formation of such complexes was also confirmed by both infrared and ultraviolet-visible measurements. The different experimental parameters that affect the fluorescence intensity were carefully studied. At the optimum reaction conditions, the drug-TCNQ complexes showed excitation maxima ranging from 277 to 284 nm and emission maxima ranging from 451 to 458 nm. Rectilinear calibration graphs were obtained in the concentration range of 0.03-0.9, 0.04-1.2, 0.04-1.3 and 0.08-2.4 microg ml(-1) for CIP, NOR, PEF and FLE, respectively. The developed methods were applied successfully for the determination of the studied drugs in their pharmaceutical dosage forms with a good precision and accuracy compared to official and reported methods as revealed by t- and F-tests.     

Estimation of Performance Characteristics of an Analytical Method Using the Data Set Of The Calibration Experiment

Abstract

A model to calculate the analytical sensitivity, limit of detection, limit of determination and precision of a method of instrumental analysis through a data set obtained by calibration experiment using the statistical analysis of linear regression, is proposed. This model has been applied to spectrophotometric, spectrofluorimetric and chromatographic methods. The values obtained are independent of the instrument used and can be applied as a criterion of comparison between different methods proposed for the same analyte. Also, these characteristics have been calculated using the IUPAC suggested model and both results have been compared.     

Spectrophotometric and spectrofluorimetric methods for analysis of acyclovir and acebutolol hydrochloride

Simple and sensitive spectrophotometric and spectrofluorimetric methods are described for analysis of acebutolol hydrochloride. The proposed methods are based on oxidation of the selected drug with cerium(IV) ion in acidic medium with subsequent measurement of either the decrease in absorbance at 320 nm or the fluorescence intensity of the produced cerous(III) ion at 363 nm (excitation at 250 nm). Beer's law obeyed from 1.0-7.0 microg ml(-1) and 0.25-2.5 microg ml(-1) acebutolol hydrochloride, using the spectrophotometric and spectrofluorimetric method, respectively. The proposed methods were successfully applied for determination of the selected drug in its pharmaceutical preparation with good recoveries.     

Study of fluorescence characteristics of the charge-transfer reaction of quinolone agents with bromanil

A spectrofluorimetric method was discussed for the determination of three antibacterial quinolone derivatives, ofloxacin (OFL), norfloxacin (NOR) and ciprofloxacin (CIP) through charge-transfer complexation (CTC) with 2,3,5,6-tetrabromo-1,4-benzoquinone (bromanil, TBBQ). The method was based on the reaction of these drugs as n-electron donors with the pi-acceptor TBBQ. TBBQ was found to react with these drugs to produce a kind of yellow complexes and the fluorescence intensities of the complexes were enhanced by 29-36 times more than those of the corresponding monomers. UV-vis, (1)H NMR and XPS techniques were used to study the complexes formed. The various experimental parameters affecting the fluorescence intensity were studied and optimized. Under optimal reaction conditions, the rectilinear calibration graphs were obtained in the concentration range of 0.021-2.42 microg mL(-1), 0.017-2.63 microg mL(-1) and 0.019-2.14 microg mL(-1) for OFL, NOR and CIP, respectively. The methods developed were applied successfully to the determination of the subject drugs in their pharmaceutical dosage forms with good precision and accuracy compared to official and reported methods as revealed by t- and F-tests.     

Spectrophotometric and Spectrofluorimetric Determination of Famotidine and Ranitidine Using 1,4-Benzoquinone Reagent

ABSTRACT

Spectrophotometric and spectrofluorimetric methods were adopted for the analysis of Famotidine and Ranitidine depending on their reaction with 1,4 Benzoquinone reagent at pH 5.2 and 5.6, respectively. The absorbances of the resulting condensation products were measured at 502 and 508 nm for Famotidine and Ranitidine, respectively. Concentrations adhering to Beer's law were from 40-160 μg.ml^? for Famotidine and from 20-100 μg.ml^? for Ranitidine.

Furthermore the resulting condensation products exhibited fluorescence at 665 nm when excited at 290 nm and the calibration graphs were rectilinear from 0.4-1.4 μg.ml^? for Famotidine and from 0.21 μg.ml^? for Ranitidine.

Different parameters affecting these reactions were thoroughly studied. Also these methods were applied to the pharmaceutical preparations and the results were satisfactory. The validities of the methods were ascertained by the standard addition technique revealing fine results in consideration to the mean recovery percent and standard deviation.

The spectrofluorimetric method was a hundred times more sensitive then the spectrophotometric method. The proposed methods were sensitive, accurate, and precise as statistically compared with the official methods of analysis of Famotidine and Ranitidine.     

Spectrofluorimetric determination of dipyridamole in serum--a comparison of two methods

Two spectrofluorimetric methods for the determination of dipyridamole in plasma are described. The thin-layer chromatographic-fluoridensitometric method utilizes 1 ml of plasma which is extracted at pH 10 with diethyl ether-dichloromethane (80:20). The organic phase is evaporated to dryness, reconstituted in 250 microliter dichloromethane and 5 microliter are spotted on a silica gel 60 plate. The plate is developed in ethyl acetate-methanol-ammonia (85:10:5), dried, dipped in a paraffin wax solution, dried, and scanned using 380 nm as excitation wavelength, a 430 nm cut-off filter, and collecting all emitted light on the photomultiplier. Quantitation was done by the external standard method, peak heights being measured and a calibration graph constructed. For the spectrofluorimetric method 1 ml of plasma is extracted at pH 10 with 8 ml of hexane-isoamyl alcohol (95:5) and the organic phase used directly for the measurement of the fluorescence intensity (excitation 405 nm, emission 495 nm). Quantitation was done by measuring the fluorescence of standards that were treated as above and constructing a calibration graph of concentration versus fluorescence intensity. Concentrations of unknowns were found by interpolation from this graph. The two methods were found to exhibit good correlation but the spectrofluorimetric method proved to be more amenable to the analysis of a large number of samples.     

Spectrofluorimetric and spectrophotometric stability-indicating methods for determination of some oxicams using 7-chloro-4-nitrobenz-2-oxa-1,3-diazole (NBD-Cl)

Two sensitive and selective spectrofluorimetric and spectrophotometric stability-indicating methods have been developed for the determination of some non-steroidal anti-inflammatory oxicam derivatives namely lornoxicam (Lx), tenoxicam (Tx) and meloxicam (Mx) after their complete alkaline hydrolysis. The methods are based on derivatization of alkaline hydrolytic products with 7-chloro-4-nitrobenz-2-oxa-1,3-diazole (NBD-Cl). The products showed an absorption maximum at 460 nm for the three studied drugs and fluorescence emission peak at 535 nm in methanol. The color was stable for at least 48 h. The optimum conditions of the reaction were investigated and it was found that the reaction proceeds quantitatively at pH 8, after heating in a boiling water bath for 30 min. The methods were found to be linear in the ranges of 1-10 microg ml(-1) for Lx and Tx and 0.5-4.0 microg ml(-1) for Mx for spectrophotometric method, while 0.05-1.0 microg ml(-1) for Lx and Tx and 0.025-0.4 microg ml(-1) for Mx for the spectrofluorimetric method. The validity of the methods was assessed according to USP guidelines. Statistical analysis of the results revealed high accuracy and good precision. The suggested procedures could be used for the determination of the above mentioned drugs in pure and dosage forms as well as in the presence of their degradation products.     

Spectrofluorimetric Determination of Ochratoxin a in Wheat and Rice Products Using an Artificial Neural Network

In order to determine Ochratoxin A (OTA) levels in wheat and rice products, an analytical study based on extraction with acetonitrile–water, immunoaffinity column cleanup, and spectrofluorimetric detection for separation and identification of OTA was carried out. The performance of artificial neural networks for modeling the OTA system in spectrofluorimetry was compared with HPLC. Obtained results using these two methods did not show significant differences. Proposed method may be a good alternative to the traditional methods of OTA analysis.     

Application of ternary and multicomponent complexes to spectrophotometric and spectrofluorimetric analysis of inorganics

The application of ternary and multicomponent complexes in spectrophotometric and spectrofluorimetric determination of trace elements is reviewed. Newer types of colour systems employing mixed ligand, surfactant sensitized, ion-association, flotation, derivative and FIA systems are described. Separate sections are devoted to advances in both spectrophotometric and spectrofluorimetric determination of individual elements. Future trends in spectrophotometric and spectrofluorimetric analysis are discussed.     

Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Complex compounds of terbium(III) with some nonsteroidal anti-inflammatory drugs and their analytical applications

Luminescence properties of the complexes of terbium(III) with nonsteroidal anti-inflammatory drugs (ibuprofen and orthofen) were studied. It was demonstrated that in the presence of organic bases (2,2’-dipyridyl and 1,10-phenanthroline) mixed-ligand complexes are formed and the luminescence intensity of terbium(III) increases by a factor of up to 250. The optimum complexation conditions were determined. It was proposed to use these complexes as analytical forms for the luminescence determination of nonsteroidal anti-inflammatory drugs (ibuprofen and orthofen) in pharmaceutical dosage forms. The detection limits are 2 and 0.05 μg/mL, respectively.     

Determination of nafcillin and methicillin by different spectrofluorimetric techniques

In order to explore the possibilities of combining synchronous fluorescence and derivative spectrometry and to establish a methodology for this type of technique, nafcillin and methicillin were determined using these techniques. Several methods for resolving binary mixtures of these penicillins using first derivative spectrofluorimetry, first derivative constant wavelength synchronous luminescence spectrometry and constant energy synchronous luminescence spectrometry are described. The analyses were performed in aqueous medium at pH 6.20 provided by the addition of phosphate buffer solution. A complete and exhaustive statistical analysis of the experimental data was performed to demonstrate the validity of these methods, which obtained good results when applied for determining nafcillin and methicillin synthetic and real mixtures.     

Determination of creatine kinase activity using a co-immobilized auxiliary enzyme reactor coupled on-line with a flow injection system

Two flow injection methods (based on spectrophotometric and spectrofluorimetric detection) were developed for the determination of over-all creatine kinase activity. Despite the complexity of the reactions involved (both include three enzyme-catalysed steps), the manifold is very simple because the two auxiliary enzymes which catalyse the two-step indicator reaction are co-immobilized on controlled-pore glass. The features of the proposed methods (calibration ranges between 0.1 and 2.0 and 0.01 and 1.0 U l-1, relative standard deviation 0.93 and 0.53% for the spectrophotometric and spectrofluorimetric methods, respectively) allow the successful determination of the analyte activity in serum samples (recoveries better than 95-105% for both methods).     

Monitoring of Sulfonamides by a Multicommutation Flow-Analysis Assembly: Use of Quenching Effect on Terbium Luminescence

Sulfonamide drugs are an important class of antimicrobial agents employed in both medicine and veterinary practice. Although there have been a variety of proposed analytical methods for their determination, many of them are not suitable for routine quality control, due to time-consuming procedures or expensive instrumentation. In this paper, we propose a simple methodology, based on the direct quenching effect produced by several sulfonamide compounds (sulfasalazine, sulfanilamide, and sulfamethoxazole) on the terbium (III) luminescence. The flow assembly was designed making use of the automatic methodology multicommutation, and the proposed method allowed the determination of up to 50 samples per hour.     

Spectrofluorimetric determination of melamine formaldehyde in solid and liquid forms and in wastewater

A new, simple and sensitive spectrofluorimetric method for determination of trace amount of melamine formaldehyde (MF) was developed. In phosphate buffer solution of pH 7.4 MF can remarkably quench the luminescence intensity of toluylene red (NR) at λ_em = 590 nm due to formation of NR-MF ion associate complex. The luminescence intensity of NR-MF complex was in proportion to the concentration of MF and used as photo probe for its determination. The dynamic range for the determination of MF is 7.5–52.5 ppm with detection limit of 4.4 ppm. The method is relatively free from interferences from coexisting substances and used successfully for the determining of MF in powder and liquid forms and in wastewater produced from MF industries. The average recoveries and standard deviations of 98.3 ± 0.6, 98.1 ± 0.6 and 97.3 ± 0.5% were achieved for determination of MF in solid, liquid forms and wastewater, respectively     

Quercetin- and Morinsulfonates as Analytical Reagents

Sulfonate derivatives of quercetin and morin, quercetin-5"-sulfonic acid (QSA) and sodium morin-5"-sulfonate (NaMSA), form complexes with p-, d-, and f-electron metal ions in solution and a solid state similarly to quercetin and morin. QSA and NaMSA are well-soluble in water, contrary to quercetin and morin. Metal ion complexes of QSA and MSA have high absorption coefficients of 10⁴ L³ mol^–1 cm^–1. Therefore, those complexes can be conveniently used for the spectrophotometric determination of metal ions. Moreover, some of complexes reveal strong luminescence and can be applied to spectrofluorimetric analysis.