A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Highly Sensitive Determination of Concanavalin A Lectin Based on Silver-Enhanced Electrogenerated Chemiluminescence of Luminol

A highly sensitive bioassay based on silver-enhanced luminol electrogenerated chemiluminescence (ECL) is reported for the determination of concanavalin A lectin. A gold electrode modified with the mixed self-assembled monolayer of thiolated mannoside and mercaptohexanol was used to selectively capture a target lectin, concanavalin A, through the specific interaction between mannoside and concanavalin A. Mannoside-functionalized gold nanoparticles were further introduced to the opposite binding sites of the tetrameric concanavalin A to form a sandwich-type complex. Silver enhancement step was performed to coat the surface of mannose-stabilized gold nanoparticles with silver. The deposited silver was dissolved in an acidic solution and further neutralized. The resulting silver ions were finally detected with luminol electrogenerated chemiluminescence, in which the silver ions greatly enhanced the chemiluminescence intensity. The present electrogenerated chemiluminescence bioassay detected concanavalin A from 0.190 to 10.0?µg/mL (r²?=?0.999) with a detection limit of 0.146?µg/mL (signal to noise ratio?=?3), which is much lower compared to previously reported methods such as microgravimetry, surface plasmon resonance, and colorimetry. Furthermore, the present bioassay showed good selectivity over possible interfering lectin proteins.     

Tris(2,2′‐bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Platinized Carbon Nanotube–Zirconia–Nafion Composite Films

Mesoporous films of platinized carbon nanotube–zirconia–Nafion composite have been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium (II) (Ru(bpy)₃²⁺) on an electrode surface to yield a solid‐state electrogenerated chemiluminescence (ECL) sensor. The composite films of Pt–CNT–zirconia–Nafion exhibit much larger pore diameter (3.55 nm) than that of Nafion (2.82 nm) and thus leading to much larger ECL response for tripropylamine (TPA) because of the fast diffusion of the analyte within the films. Due to the conducting and electrocatalytic features of CNTs and Pt nanoparticles, their incorporation into the zirconia–Nafion composite films resulted in the decreased electron transfer resistance within the films. The present ECL sensor based on the Pt–CNT–zirconia–Nafion gave a linear response (R²=0.999) for TPA concentration from 3.0 nM to 1.0 mM with a remarkable detection limit (S/N=3) of 1.0 nM, which is much lower compared to those obtained with the ECL sensors based on other types of sol‐gel ceramic–Nafion composite films such as silica–Nafion and titania–Nafion.     

Determination of Sugars by LC with On-Line Electrogenerated Cu(HIO6)2]5−–Luminol Chemiluminescence Detection

A novel method was developed for the determination of sugars such as glucose, fructose and lactose by column liquid chromatography coupled with chemiluminescence detection. The LC separation used a Kromasil NH₂ column (250 × 4.6 mm, i.d.: 5 μm, pore size, 100 Å) with a mobile phase consisting of acetonitrile and water. The chemiluminescence detection was based on the enhancement effect of the selected sugars on the chemiluminescence intensity between luminol and [Cu(HIO₆)₂]^5?, which was on-line electrogenerated by constant current electrolysis. The limits of detection for determination of glucose, fructose and lactose were 4, 3 and 20 μg mL^?1, respectively. The proposed method has been successfully applied to the determination of glucose and fructose in grape samples and lactose in milk samples.     

Europium(III)-Sensitized Chemiluminescence Determination of Ibuprofen in Pharmaceutical Preparations and Biological Fluids

Abstract

Chemiluminescence reaction of the system containing europium(III) ion, KMnO₄, Na₂SO₃, and ibuprofen was investigated for the determination of ibuprofen. The introduction of Eu(III) ion into the system of KMnO₄-Na₂SO₃-ibuprofen caused a significant increase in the chemiluminescence signal. The increment of the chemiluminescence signal is proportional to ibuprofen concentration in the range of 5.0 × 10^?8–5.0 × 10^?6 g/ml with a detection limit of 1 × 10^?8 g/ml. The relative standard deviation for 1.0 × 10^?7 g/ml ibuprofen solution was 1.7% (n = 11). The proposed method was successfully applied to determine ibuprofen in tablets and human plasma.     

Octahedral copper(II) carboxylate complex: synthesis,structural description,DNA-binding and anti-bacterial studies

Self-assembly of CuSO₄, para-methyl-2-phenyl acetate and 1,10-phenanthroline afforded good-quality crystalline complex in quantitative yield. The complex was characterized by FTIR and UV-visible spectroscopy, electrochemistry, and powder and single-crystal XRD studies. Its structure was found to possess axially elongated octahedral symmetry with CuO₄N₂ chromophore. Its purity was assessed by powder XRD spectrum. Absorption study yielded a broad band corresponding to ²E_g→²T_2 g transition. Electrochemical solution study indicated diffusion-controlled irreversible electron transfer process corresponding to Cu(II)/Cu(I) redox couple with diffusion coefficient = 7.89(±0.1)×10^?9 cm²s^?1. Results of spectroscopic techniques support each other. Complex exhibited excellent DNA-binding ability through UV-visible spectroscopy and cyclic voltammetry yielding K_b values 1.399 × 10⁴ M^?1 and 5.81 × 10³ M^?1, respectively. The complex exhibited significant activity against bacterial strains Escherichia coli, Micrococcus luteus and Staphylococcus aureus and good activity against Bacillus subtilis. These preliminary studies impart good biological relevance on the synthesized complex.     

Study on Electrochemiluminesce of Ru(bpy3)2+ Immobilized in a Titania Sol‐Gel Membrane

The immobilization of tris(2,2′‐bipyridyl)ruthenium(II), Ru(bpy)₃²⁺, at a glassy carbon electrode was achieved by entrapping the Ru(bpy)₃²⁺ in a vapor deposited titania sol‐gel membrane. The electrogenerated chemiluminescence (ECL) of the immobilized Ru(bpy)₃²⁺ was studied. The Ru(bpy)₃²⁺ modified electrode showed a fast ECL response to both oxalate and proline. The ECL intensity was linearly related to concentrations of oxalate and proline over the ranges from 20 to 700 μmol L^?1 and 20 to 600 μmol L^?1, respectively. The detection limits for oxalate and proline at 3σ were 5.0 μmol L^?1 and 4.0 μmol L^?1, respectively. This electrode possessed good precision and stability for oxalate and proline determinations. The electrogenerated chemiluminescence mechanism of proline system was discussed. This work provided a new way for the immobilization of Ru(bpy)₃²⁺ and the application of titania sol‐gel membrane in electrogenerated chemiluminescence.     

A Novel Electrogenerated Chemiluminescence Reaction Scheme Using Core-Shell LuminoI-Based SiO2 Nanoparticles as a Regulator and Its Analytical Application

A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC） reaction as well as the subsequent chemiluminescence （CL） reaction not only could be separated spatially, but also presented high efficiency for analytical purpose. In this case, the core-shell luminol-based SiO2 nanoparticles offered more potential to avoid the contradiction between the EC and the CL reaction conditions. A new ECL method based on the nanoparticle was developed, and isoniazid was selected as a model analyte to illustrate the characteristics of this new ECL method. Under the selected conditions, the proposed ECL response to isoniazid concentration was linear in the range of 1.0 ×10^-10 to 1.0 × 10^-6 g/mL with 2 × 10^-11g/mL detection limit.     

An enhanced oxime-based biomimetic electrochemical sensor modified with multifunctional AuNPs–Co<Subscript>3</Subscript>O<Subscript>4</Subscript>–NG composites for dimethoate determination

An enhanced oxime-based electrochemical sensor decorated with gold nanoparticles (AuNPs) and Co₃O₄ hexagonal nanosheets coupled with nitrogen-doped graphene has been developed for dimethoate determination dramatically. The introduction of Co₃O₄ hexagonal nanosheets tackles agglomeration of AuNPs and also enhances the sensitivity of electrochemical sensors greatly. The structure and properties of the synthesized composites were characterized by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and Fourier transform infrared spectroscopy, confirming the successful modification of 2-(4-mercaptobutoxy)-1-naphthaldehyde oxime and Co₃O₄ supported AuNPs in a great experiment. In addition, differential pulse voltammetry further revealed that the developed electrochemical sensor exhibited excellent selectivity, sensitivity and stability in real samples analysis. Under optimal conditions, the modified sensor displayed a broad linear range from 1?×?10^?14 M to 1?×?10^?6 M with a fairly low detection limit of 8.4?×?10^?14 M (S/N?=?3) and was expected to act as a superior method for dimethoate determination.     

Electrochemical sensor for determination of aflatoxin B1 based on multiwalled carbon nanotubes-supported Au/Pt bimetallic nanoparticles

A sensitive and selective imprinted electrochemical sensor for the determination of aflatoxin B₁ (AFB₁) was constructed on a glassy carbon electrode by stepwise modification of functional multiwalled carbon nanotubes (MCNTs), Au/Pt bimetallic nanoparticles (Au/PtNPs), and a thin imprinted film. The fabrication of a homogeneous porous poly o-phenylenediamine (POPD)-grafted Au/Pt bimetallic multiwalled carbon nanotubes nanocomposite film was conducted by controllable electrodepositing technology. The sensitivity of the sensor was improved greatly because of the nanocomposite functional layer; the proposed sensor exhibited excellent selectivity toward AFB₁ owing to the porous molecular imprinted polymer (MIP) film. The surface morphologies of the modified electrodes were characterized using a scanning electron microscope. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. A linear relationship between the sensor response signal and the logarithm of AFB₁ concentrations ranging from 1?×?10^?10 to 1?×?10^?5 mol L^?1 was obtained with a detection limit of 0.03 nmol L^?1. It was applied to detect AFB₁ in hogwash oil successfully.     

Gold nanoparticles and a glucose oxidase based biosensor: an attempt to follow-up aging by XPS

Amperometric biosensors are widely used for clinical, food industry and environmental control. A universal platform allowing immobilization of different enzymes could provide a fast and easy way to design new sensors, but the main drawback effect with oxidase based biosensors is the production of hydrogen peroxide. The direct electron transfer is a way to limit the H₂O₂ production. A modified electrode described by Zhao et al. (Bioelectrochemistry, 69(2):158, 2006), based on immobilization of glucose oxidase/colloidal gold nanoparticles on a glassy carbon electrode by Nafion film, has been used. Its sensitivity is 0.4 μA mM^?1 cm^?2, reproducibility is 3.0%, detection limit is 0.37 mM, response to glucose is linear up to 20 mM; limit of detection is 0.37 mM and response time is about 1.5 min. This sensor displays a formal redox potential compatible with a direct electron transfer, and has been tested for its response in time and GOx denaturation by X-ray photoelectron spectroscopy. Vanishing of disulphide bonds of GOx has been observed after a period in a saturating solution of glucose but this does not appear determinant in loss of enzyme activity.     

Dye sensitization of a large band gap semiconductor by an iron(III) complex

The Fe(III) complex, [Fe^III(HQS)₃] (HQS = 8-hydroxyquinoline-5-sulfonic acid), is found to effect sensitization of the large band gap semiconductor, TiO₂. The role of interfacial electron transfer in sensitization of TiO₂ nanoparticles by surface adsorbed [Fe^III(HQS)₃] was studied using femtosecond time scale transient absorption spectroscopy. Electron injection has been confirmed by direct detection of the electron in the conduction band. A TiO₂-based dye-sensitized solar cell (DSSC) was fabricated using [Fe^III(HQS)₃] as a sensitizer, and the resulting DSSC exhibited an open-circuit voltage value of 425 mV. The value of the short-circuit photocurrent was found to be 2.5 mA/cm². The solar to electric power conversion efficiency of the [Fe^III(HQS)₃] sensitized TiO₂-based DSSC device was 0.75 %. The results are discussed in the context of sensitization of TiO₂ by other Fe(II)-dye complexes.     

Thermokinetic characterisation of tin(II) chloride

Thermokinetic behaviour of SnCl₂ was investigated using differential scanning calorimetry and thermogravimetry techniques under non-isothermal conditions in air, complemented by electron microscopy and Raman spectroscopy. According to the results obtained, the oxidation of SnCl₂ at the heating rates of 5 and 100 °C min^?1 leads to the in situ formation of highly crystalline SnO₂ nanostructures in the form of nanoparticles and nanorods, respectively. The oxidation of SnCl₂ was found to be a liquid–solid (LS) phase transition at the heating rates equal or lower than 10 °C min^?1 and a gas–solid phase transition at the heating rates equal or greater than 20 °C min^?1. The activation energy of melting, vaporisation and LS oxidation of SnCl₂ was determined to be 198, 93 and 91 kJ mol^?1, respectively.     

Determination of Spectinomycin in Human Urine Using CE Coupled with Electrogenerated Chemiluminescence

A method of capillary electrophoresis with electrogenerated chemiluminescence was developed for the detection of spectinomycin. The linear ranges were from 0.01 to 1.0 mg mL⁻¹ for spectinomycin. The limit of detection for spectinomycin with a signal-to-noise ratio of 3:1 was found to be 4.0 µg mL⁻¹. For practical application perchloric acid was used to eliminate the protein contained in human urine, which is very harmful to electrophoresis separation. The recoveries of spectinomycin at different levels in human urine were between 91.1 and 106.5%. The RSD was between 2.6 and 4.8% (n = 5–6). It was valuable in clinical and biochemical laboratories for monitoring the drug for various purposes.

     

Highly Sensitive Electrogenerated Chemiluminescence Isoniazid with NiO Nanoparticles‐modified Graphite Electrode

Abstract

NiO nanoparticles (NiO NPs) were prepared with chemical precipitation method and modified on the surface of vaseline‐impregnated graphite electrode with chitosan. It was found that, based on the catalysis of the NiO NPs for the chemiluminescent reaction of the ECL process, the enhancing effect of isoniazid on the weak electrogenerated chemiluminescence (ECL) signal of luminol at a NiO NPs‐chitosan modified electrode was stronger than that at a bare graphite electrode. Under the optimum experimental conditions, the relative ECL intensity was linear with isoniazid concentration over the range 3.0×10^?10～1.0×10^?6 g/ml at the NiO NPs‐chitosan modified electrode with a detection limit of 1.0×10^?10 g/ml.     

New Azobenzene Dye Colorimetric and Ratiometric Chemosensors for Mercury(Ⅱ)Ion

A new series of azobenzene dyes, which possessed colorimetric and ratiometric recognition to Hg²⁺ based on the mechanism of internal charge transfer (ICT), was developed and characterized. The molecules involving azo and imino functional groups can coordinate with Hg²⁺ to result in a large blue shift from 453 to 363 nm corresponding to a notable color change from orange to pale yellow in aqueous methanol solution (H₂O/CH₃OH=1/4, V/V), which can be applied to naked eye detection of Hg²⁺. The sensitivity, selectivity and binding mode of the sensors to Hg²⁺ were investigated by UV‐Vis spectroscopy.     

Direct electrochemistry of horseradish peroxidase based on hierarchical porous calcium phosphate microspheres

Biomorphic calcium phosphate (CaP) microspheres with hierarchical porous structure were synthesized using natural cole pollen grains as templates and were further employed for the immobilization of horseradish peroxidase (HRP). Scanning electron microscopy and Fourier transform infrared spectroscopy revealed (a) the porous structure of the CaP microspheres, (b) the effective immobilization, and (c) the retention of the conformation of HRP on CaP. The immobilized HRP was placed on a glassy carbon electrode where it underwent a direct, fully reversible, and surface-controlled redox reaction with an electron transfer rate constant of 1.96 s^?1. It also exhibits high sensitivity to the reduction of H₂O_2. The response to H₂O₂ is linear in the 5.00 nM to 1.27 μM concentration range, and the sensitivity is 30357 μA?mM^?1?cm^?2. The detection limit (at an SNR of 3) is as low as 1.30 nM. The apparent Michaelis–Menten constant (K _M ^app ) of the immobilized enzyme is 0.92 μM. This new CaP with hierarchical porous structure therefore represents a material that can significantly promote the direct electron transfer between HRP and an electrode, and is quite attractive with respect to the construction of biosensors.

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

A Novel Enhanced Chemiluminescence System with Ag(III) Complex for the Determination of Ofloxacin and Levofloxacin in Pharmaceutical Preparation and Biological Fluid

A novel chemiluminescence (CL) method is developed for determination of ofloxacin and levofloxacin with Ag(III) complex in H₂SO₄ solution medium. The CL intensity is proportional to drug concentration in a wider range with a correlation coefficient of 0.999. The limit of detection (s/n = 3) for ofloxacin and levofloxacin was 5.3 × 10^?9 g ml^?1 and 8.3 × 10^?9 g ml^?1, respectively, and their recoveries from urine and serum samples were in the range of 90.1–112% with the RSDs of 1.0–2.8%. The proposed method was applied for analysis of real samples with satisfactory result. The possible CL mechanism was discussed.     

Study on Chemiluminescence Assay of Surfactant PEG-400 Using Luminol–Hydrogen Peroxide System

Abstract

Based on the fact that nonionic surfactant polyethylene glycol-400 (PEG-400) catalyzed the chemiluminescence of luminol-H₂O₂ system, a novel and simple chemiluminescence method has been developed for the determination of PEG-400. Under the optimal conditions, the standard curve was Y = 198835X–2091.8, where the correlation coefficient (R) was 0.9999. The detection limit was 4 × 10^?5 g·ml^?1 PEG-400 and the linear range was 1.0 × 10^?4–4.0 × 10^?2g·ml^?1. The relative standard deviation was 3.2% at 2.0 × 10^?3 g·ml^?1 PEG-400 (n = 7). This method has been applied to the determination of PEG-400 in cosmetic samples with satisfactory results. Furthermore, the dynamics characteristic curve of PEG-400 in luminol-H₂O₂ system was compared to typical metallic ion and other surfactants. Moreover, the mechanism of the luminol-H₂O₂-PEG-400 chemiluminescence system was studied, assisted by fluorescence spectra and UV spectra.