Colorimetric and Bromometric Determination of Pirbuterol Hydrochloride

Abstract

Two proposed methods are reported for the quantitation of pirbuterol hydrochloride, namely, (i) colorimetric and (ii) titrimetric methods. The colorimetric method is based on coupling betweem diazotized sulphanilamide and pirbuterol hydrochloride. Under the optimum conditions studied, the coupling product exhibits a maximum at 440 nm. Linear relation between absorbance, A, and concentration of pirbuterol hydrochloride is in the range 5–40 μgml^?1. The mean percentage obtained for capsules (Exirel^R ?15 mg) was 100.8 ± 0.7 whereas mean percentage recovery obtained for the authentic drug was 100.5 ± 0.8.

The titrimetric procedure involves bromination of authentic pirbuterol in acid medium and residual titration of excess bromine. The stoichiometry of the reaction was investigated and infra-red analysis, of the bromoderivative was carried out. When applied to capsules the bromometric method gave mean percentage of 100.18 ± 2.25.     

Using 2,4 DNPH-PVC membrane sensors for indirect determination of formaldehyde in urea glue and wastewater

Three simple, rapid, and sensitive ion-selective electrodes for indirect determination of free formaldehyde in urea glue and wastewater have been developed. The methods are based on the formation of the membrane sensors 2,4-dinitrophenylhydrazine-phosphtungestic acid (DNPH-PTA), 2,4-dinitrophenylhydrazine-phosphomolybdic acid (DNPH-PMA), and 2,4-dinitrophenylhydrazine-tetraphenylborate (DNPH-TPB) as neutral carriers. The sensors are stable and show fast potential responses of 30?s, and near-Nernstian cationic slopes of 56.2?±?0.5, 54.3?±?0.5, and 53.8?±?0.4?mV per decade of activity between pH 0.5 and 3.5 over a wide range of 2,4-dinitrophenylhydrazine concentrations (1?×?10^?5 to 1?×?10^?2?M). These sensors were used for indirect determination of formaldehyde over concentration range (1?×?10^?4 to 1?×?10^?1?M). The selectivity coefficients of the developed sensors indicate excellent selectivity for 2,4 DNPH over a large number of organic and inorganic species. The mediator o-nitrophenyloctyl ether has a significant affect on the lifetime of the fabricated sensors. The analytical applications of the proposed sensors showed good results for indirect determination of formaldehyde in formaldehyde solutions, wastewater solutions, and free formaldehyde in urea-formaldehyde liquid and powder glues. The results were compared favourably with that obtained by ASTM, colorimetric, and British Standard methods.     

Simultaneous Determination of Sodium,Potassium, and Ammonium Ions by Automated Direct Potentiometry

Abstract

Sodium, potassium and ammonium ions, in concentration ranges of natural and waste water samples, have been simultaneously determined by direct potentiometry, using sodium, potassium, and ammonia ion-sensitive electrodes. The results are printed out as concentration units directly from an automated continuous -flow system with on-line minicomputer and printer. The optimum sampling rate is 20 samples or 60 determinations per hour. Various water samples have been analyzed and the results compared to those obtained by the standard methods. The lower detection limits were 0.1 ppm for Na⁺ and NH₄ ⁺ and 1.0 ppm for K⁺. The values of standard deviation were < 10%, with the exception of the lowest concentrations. The relative error was in the range of ± 2%. The correlation of standard and proposed methods was very good.     

A Novel Method for the Determination of Streptomycin Using Sodium Nitroprusside as a Chromogenic Reagent by Spectrophotometry

Abstract

A rapid and simple spectrophotometric method for the determination of streptomycin has been developed and validated. The method was based on the reaction of streptomycin with sodium nitroprusside in the alkaline medium forming a red product measured at the maximum absorption of 495 nm. The stoichiometric ratio of the product is 1:1. Beer's law is obeyed in a range of 1.87 µg mL^?1 ～ 279.8 µg mL^?1 of streptomycin and ?₄₉₅ is 6.0 × 10³ L·mol^?1 cm^?1.Under the optimum condition, the equation of linear regression is A = 0.00742 + 0.05683 C (× 10⁵ mol·L^?1), with a linear correlation coefficient of 0.9990. The detection limit (3σ/k) is 0.96 µg mL^?1, the relative standard deviation (RSD) is 2.40%, and the average recovery rate is 98.3%–102.7%. Every parameter has been optimized, and the reaction mechanism has been studied. The proposed method has been successfully applied to the determination of streptomycin for injections and tablets of pharmaceutical preparation. Analytical results obtained by this new method were very gratifying.     

Innovative Spectrophotometric Methods for Determination of Almitrine Dismesylate and Raubasine in Duxil Tablets

Abstract

Ratio subtraction and isosbestic point are two methods used to determine a mixture of almitrine dismesylate and raubasine. Linear correlations were obtained in the range from 4 to 18 µg ml^?1 for almitrine dismesylate and 2 to 16 µg ml^?1 for raubasine, with mean accuracies 99.87 ± 1.053 for almitrine dismesylate and 99.75 ± 1.301 for raubasine. Almitrine dismesylate and raubasine (II) in their mixtures were analyzed by the two methods where the total content was determined at the isosbestic point at 214.0 nm and raubasine was determined by ratio subtraction. The proposed methods were validated to be suitable for analysis of the pharmaceuticals.     

Colorimetric and Polarographic Methods of Analysis for Prenalterol Hydrochloride

Abstract

Two proposed methods have been described for the determination of prenalterol hydrochloride in acetate buffer (pH=4.1) as authentic material and in tablets form using a (i) colorimetric method based on reduction of ferric iron by prenalterol hydrochloride and subsequent measurement at 511 nm of the red color obtained by the treatment of the resultant ferrous iron with 1, 10-orthophenanthroline, (ii) a differential pulse polarographic method based on nitrosation with 0.1 M NaNO₂/dil. HC1 and consequent recording of the differential pulse polarogram. The differential polarogram was obtained under constant amplitude pulses of 50 mV (DP 50) superimposed on a linearly increasing DC-voltage ramp. The peak height (h), of the polarogram was measured at the peak potential of -0.2V on the dropping mercury electrode (DME) versus Ag/AgCl reference electrode. The linearity ranges observed are 0.6μgfml to 6.0μg/ml and 2μg/ml to 12μg/ml, respectively. The mean percentage recoveries for an authentic sample are 99.5±1.4 and 100.5±0.7, respectively. When applied to tablets claimed to contain 10 mg each, the mean percentages obtained are 99.7±2.3 and 100.6 ±1.5 respectively.     

Spectrophotometric and Spectrofluorimetric Determination of Cyclophosphamide and Its Isomer Ifosphamide

Abstract

Based on the condensation reaction between amino groups of either cyclophosphamide or ifosphamide with the carbonyl group of ninhydrin, giving coloured and fluorescent products, a spectrophotometric procedure for both drugs is suggested in the range from 30 to 90μg ml^?1 at 564 nm, with accuracies of 100.6 ± 1.06% and 100.8 ± 1.02% for cyclophosphamide and ifosphamide, respectively. Also, a spectrophotometric procedure for both drugs is proposed in the range from 1.2 to 3.6 μg ml^?1 at 465 nm and 485 nm for cyclophosphamide and ifosphamide, respectively, using 380 nm as an excitation wavelength for both drugs with accuracies of 100.4 ± 1.83% and 99.5 ± 1.64%, respectively. This condensation reaction, however, does not differentiate between the two isomeric drugs.

Another new method is, therefore, suggested. It depends on the fact that the secondary amino group of ifosphamide is hindered electronically and sterically, while the nucleophilic amino group of cyclophosphamide reacts with the nitrosyl group of sodium nitroprusside molecule, giving a bluish green colour measurable at 708 nm. This colour is used for the determination of cyclophospahmide in the presence of its isomer ifophamide in the range from 0.2 to 1 mg ml^?1 with repeatability of 99.2 ± 1.49%.

The suggested procedures are applied successfully to pharmaceutical formulations of cyclophosphamide and ifosphamide, and their validities are assessed by applying the standard addition technique. The results obtained by applying the proposed procedures are statistically analyzed and compared with those obtained by adopting the United States Pharmacopoeial method.     

Analytical Application of Resonance Rayleigh Scattering,Frequency Doubling Scattering,and Second-Order Scattering Spectra for the Sodium Alginate-CTAB System

Three new methods for the determination of trace amounts of sodium alginate (SA) based on the reaction of SA with cetyltrimethylammonium bromide (CTAB) by resonance Rayleigh scattering (RRS), frequency doubling scattering (FDS), and second-order scattering (SOS) have been investigated. The SA can react with CTAB in a pH 10.0 Britton–Robinson buffer to form a new product, which can lead to a significant enhancement of RRS, FDS, and SOS intensities and appearance of new spectra. The maximum scattering wavelengths, λex/λem, appear at 351 nm/351 nm for RRS, 240 nm/480 nm for SOS, and 870 nm/435 nm for FDS, respectively. The increments of the scattering intensities (ΔI) are proportional to the concentration of SA in a certain range. The detection limits (3σ) for SA are 3.69 ng mL^?1 for the RRS method, 6.91 ng mL^?1 for the FDS method, and 7.45 ng mL^?1 for the SOS method under optimum conditions. The proposed methods were applied to the determination of SA in real samples with satisfactory results.     

Spectrophotometric Determination of Certain Phenothiazines and Their Dosage Forms Using Bromophenol Blue

Abstract

A simple and rapid spectrophotometric method for the determination of seven phenothiazine derivatives has been performed either in pure form or in their dosage forms. The method is based upon the interaction of the drug in dry chloroform with bromophenol blue in the same solvent to produce a stable yellow ion-pair complex which absorbs at 410 nm, with high apparent molar absorptivity. Beer's Law is obeyed in the concentration range 1?10 ugml^?1 for the studied compounds. The mean recoveries range from 99.80±0.74 to 100.50±1.33. The proposed method is applied for the analysis of the studied compounds in their commercial preparations. Results are in good agreement with those obtained by official methods.     

Construction and Performance Characterization of Ion‐Selective Electrodes for Potentiometric Determination of Paroxetine Hydrochloride in Pharmaceutical Preparations and Biological Fluids

Three types of ion‐selective electrodes: PVC membrane, modified carbon paste (CPE), and coated graphite electrodes (CGE) have been constructed for determining paroxetine hydrochloride (Prx). The electrodes are based on the ion pair of paroxetine with sodium tetraphenylborate (NaTPB) using dibutyl phthalate as plasticizing solvent. Fast, stable and potentiometric response was obtained over the concentration range of 1.1×10^?5–1×10^?2 mol L^?1 with low detection limit of 6.9×10^?6 mol L^?1 and slope of a 56.7±0.3mV decade^?1 for PVC membrane electrode, the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 1.2×10^?5 mol L^?1 and slope of a 57.7±0.6 mV decade^?1 for CPE, and the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 8.9×10^?6 mol L^?1 and slope of a 56.1±0.1 mV decade^?1 for CGE. The proposed electrodes display good selectivity for paroxetine with respect to a number of common inorganic and organic species. The electrodes were successfully applied to the potentiometric determination of paroxetine hydrochloride in its pure state, its pharmaceutical preparation, human urine and plasma.     

Chemiluminescence Determination of Organophosphorus Pesticides Chlorpyrifos in Vegetable

Abstract

A novel chemiluminescence method for the quantitative assay of the organophosphorus pesticide chlorpyrifos in vegetable samples is presented. The determination is based on the reaction of chlorpyrifos with luminol-H₂O₂ in alkaline medium with sodium chloride being enhancer. Under the optimum conditions, the increased CL intensity was proportional with the concentration of chlorpyrifos in the range of 1.0 × 10^?8 g · ml^?1 ? 1.0 × 10^?6 g · ml^?1 and the detection limit was 3.5 × 10^?9 g · ml^?1 (3σ). The relative standard is less than 3.9% for 5.0 × 10^?7g · ml^?1 chlorpyrifos (n = 7). This method has been successfully applied to the determination of chlorpyrifos residue in vegetable sample. Further study was focused on the mechanism of chlorpyrifos and the possible mechanism was proposed.     

Rapid Determination of Pentazocine in Human Plasma and Urine by a Potentiometric Method

Abstract

A fast potentiometric determination method has been reported for pentazocine in human plasma without complicated pretreatments using a coated-wire potentiometric selective electrode. The sensing membrane was made by incorporating of ion-association complexes of pentazocine cation and sodium tetraphenyl borate (NaTPB) in a polyvinyl chloride. The sensor exhibited fast, stable, and linear Nernstian response over the range of 5 × 10^?5 to 0.1 mol L^?1 pentazocine with a slope of 57.8 mV per decade and with detection limit of 3.2 × 10^?5 mol L^?1. The proposed sensor has been used for determination of pentazocine in human plasma and urine.     

Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

PPb Level Monitoring of Dy(III) Ions by a Highly Sensitive and Selective Dy(III) Sensor Based on a New Asymmetrical Schiff's Base

Abstract

A Dy(III) ion‐selective membrane sensor has been fabricated from polyvinyl chloride (PVC) matrix membrane containing a new asymmetrical Schiff's base [(E)‐N‐(2‐hydroxybenzylidene)benzohydraide] or BBH as a neutral carrier, sodium tetraphenyl borate (NaTPB) as an anionic excluder and nitrobenzene (NB) as a plasticizing solvent mediator. The membrane sensor displays linear potential response in the concentration range of 1.0×10^?2–1.0×10^?6 M of Dy(III). The electrode exhibits a nice Nernstian slope of 20.1±0.8 mV/decade in the pH range of 3.0–8.0. The sensor has a relatively short response time in whole concentration ranges (<20 s). The detection limit of the proposed sensor is 8.0×10^?7 M (～128 ng/mL), and it can be used over a period of six weeks. The selectivity of the proposed sensor with respect to other cations, (alkali, alkaline earth, transition and heavy metal ions) and especially lanthanid ions, is excellent. The practical utility of the sensor has been demonstrated by using it as an indicator electrode in the potentiometric titration of Dy(III) with EDTA.     

Synthesis and crystal structures of new sodium phenolate compounds: coordination chemistry

Four new sodium complexes of phenolate and bisphenolate ligands have been synthesized and characterized by NMR spectroscopy and X-ray crystallography to study their coordination chemistry. The monoanionic tridentate [ONN] phenolate ligand gave a dimeric compound [Na₂L₂] (2), which crystallized in the orthorhombic crystal system, where the sodium ions have four coordination environments. The dianionic tridentate [ONO] phenolate ligand gave a dimeric [Na₂(L^IH)₂] (4) compound in the tetragonal crystal system. The sodium ions Na(1) and Na(1?) are four-coordinate both having a tetrahedral geometry with the O–Na–O angle being ca. 93°, the O^N^O ligand string comprising a tridentate ligand. Interestingly, despite the steric bulk of N(SiMe₃)₂, a mixture of compounds [NaL] (2) and NaN(SiMe₃)₂ was isolated as a dimeric structure [Na₂L(N(SiMe₃)₂)]₂ (5) crystallized in the monoclinic crystal system. Na(1) is four-coordinate bonding to the phenolic oxygen atom and two N atoms of the ligand L and the N of the N(SiMe₃)₂ ligand. The coordination around Na(1) is tetrahedrally distorted square planar with the ‘cis’ angles ranging from 75.11(4) to 117.40(5)° and the ‘trans’ angles being 140.87(4) and 154.82(5)°. Na(2) is three-coordinate, bonding to the two phenolate oxygen atoms and the N atom of the N(SiMe₃)₂ ligand. Na(2), however, is not coplanar with these atoms being displaced 0.42 Å from it. The coordination chemistry for 5 is very intriguing as the sodium ions have mixed four- and three-coordination numbers, probably due to the steric hindrance of the silylamide groups.     

Preparation and characterization of in situ carbon paste and screen-printed potentiometric sensors for determination of econazole nitrate: surface analysis using SEM and EDX

The construction and performance characteristics of new sensitive and selective in situ carbon paste (ICPE) and screen-printed (ISPE) potentiometric sensors modified with ion-pairing agents such as phosphotungstic acid, sodium tetraphenylborate, phosphomolybdic acid and ammonium reineckate for determination of econazole nitrate (ECN) have been developed. The reaction mechanism between ECN and ion-pairing agents at the electrode surface was studied through scanning electron microscope and energy-dispersive X-ray analysis. The electrodes under investigation showed potentiometric response for ECN in the concentration range from 1.0 × 10^?6 to 5.0 × 10^?3 mol L^?1 and from 1.0 × 10^?6 to 1.0 × 10^?2 mol L^?1 for ISPE (electrode I) and ICPE (electrode II) potentiometric sensors, respectively, at 25 °C. The electrode response was pH independent in the range 2.5–7.5 and 2.5–6.5 for electrodes I and II, respectively. These sensors have Nernstian slope values of 59.4 ± 0.2 and 59.10 ± 0.2 mV decade^?1 with detection limit of 1.0 × 10^?6 mol L^?1 for electrodes I and II, respectively. The electrodes showed fast response time of 4 and 9 s for electrodes I and II, respectively. The ISPE (electrode I) showed lifetime of 28 days, and this was considered as advantage over ICPE (electrode II). Selectivity for ECN with respect to a number of interfering materials was also investigated. The proposed electrodes were applied for determination of ECN in pure and pharmaceutical formulation using calibration, potentiometric titration and standard addition methods. The results showed good agreement with those obtained using official method. The t and F values indicated no significant difference between the suggested and reported methods. Method validation parameters were optimized according to ICH recommendations.     

Complex formation of Ni(II) and Fe(III) with the nitrite anion

The stepwise stabilities of the complexes formed by Ni(II) and Fe(III) with the nitrite anion have been determined potentiometrically in an aqueous sodium perchlorate medium of unit ionic strength at 25.0°C. Two fairly weak mononuclear complexes are formed in the Ni(II)-nitrite system with the overall formation constants at β₁ = 5.9±0.9 M⁻¹ and β₂ = 12±2 M⁻², while for the Fe(III)-nitrite system three mononuclear complexes of moderate strengths, namely β₁ = (3.9±0.7) × 10² M⁻¹, β₂ = (5±2) × 10³ M⁻² and β₃ = (2.8±0.6) × 10⁵ M⁻³, are found. No evidence has been found for the formation of polynuclear or acid complexes in the concentration range studied.     

Synthesis and Structures of 3,5-disubstituted 1,2,4-triazole Head Units and Incorporation of 3,5-dibenzoyl-1,2,4-triazolate into New [2 + 2] Schiff-Base Macrocyclic Complexes

The synthesis and characterization of sodium 3,5-diacetyl-1,2,4-triazolate (4 ^Me ) and sodium 3,5-dibenzoyl-1,2,4-triazolate (4 ^Ph ), both of which can be used as head unit building blocks in Schiff-base reactions, are reported. The crystal structures of sodium 3,5-diacetyl-1,2,4-triazolate, as [4 ^Me (H₂O)]_∞, and sodium 3,5-dibenzoyl-1,2,4-triazolate, as [4 ^Ph (CH₃OH)₂]₂, have been determined. The former is a helical polymer whilst the latter is a methanol-bridged dimer. The lead(II) templated cyclization reaction of sodium 3,5-dibenzoyl-1,2,4-triazolate (4 ^Ph ) with 1,3-diaminopropane or 1,4-diaminobutane, respectively, leads to the formation of two new [2 + 2] Schiff-base macrocycles as their lead(II) complexes, [Pb₂ L ^3Ph (μ-OH)]ClO₄ (5) and [Pb₂ L ^4Ph (μ-OH)]ClO₄ (6), respectively. Transmetallation of 5 with nickel(II) ions yields a novel, structurally characterized, dinickel(II) macrocyclic complex, [Ni₂ L ^3Ph (NCS)₂] (7), which features double triazolate bridging of the two five-coordinate nickel(II) ions.     

Preparation and structural characterization of oxovanadium(V) complexes with Schiff bases and their inhibition studies on Helicobacter pylori urease

A series of structurally similar dinuclear oxovanadium(V) complexes, [VO₂L]₂ (L?=?L¹?=?2-[(2-methylaminoethylimino)methyl]phenolate (1); L?=?L²?=?2-[(2-ethylaminoethylimino)methyl]phenolate (2); L?=?L³?=?2-[(2-isopropylaminoethylimino)methyl]phenolate (3)), has been synthesized and characterized by physico-chemical methods and single-crystal X-ray diffraction. The V in each complex is octahedral, with three donors of L and one oxo defining the equatorial plane, and with two oxos occupying the axial positions. The complexes were tested for their urease inhibitory activities. The inhibition rate (%) of 1, 2, and 3 at 100?µmol?L^?1 on urease are 67?±?1, 53.5?±?0.9, and 44?±?1. The relationship between structures of the complexes and the urease inhibitory activities indicates that shorter terminal groups of the complexes have stronger activities against urease. Molecular docking study of the complexes with the Helicobacter pylori urease was performed.     

Ion-solvent and ion-ion interactions of NaCl aqueous and aqueous maltose solutions at 298–323 K on viscosity data

Viscosities of sodium chloride in concentration range 1 × 10^?2 to 9 × 10^?2 ± 0.001 mol dm^?3, have been determined in aqueous and aqueous maltose systems (1.0 to 9.0 wt %) at different temperatures (298 to 323 K). The viscosity data have been analyzed by using Jones-Dole equation and the derived parameters A and B coefficients were also calculated. The data obtained from viscometric studies has been used to investigate the ion-solvent interaction and ion-ion interaction. Thermal effects on the ionic interactions were also examined under the light of transition state theory.