Synthesis,crystal structure and non-linear optical properties of a new cyanide-containing compound

Reaction of K₃[Fe(CN)₆], NiCl₂ and diethylenetriamine (dien) resulted in the formation of a cyanide-containing heterometallic compound [Ni(dien)₂]₂[Fe(CN)₆]·4H₂O 1. The structure consists of two octahedral [Ni(dien)₂]²⁺ cations, one octahedral [Fe(CN)₆]^4? anion and four crystallization water molecules, which are held together by hydrogen-bonding interactions. Its TG curve exhibits two stages of mass loss. Compound 1 in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with an absorption coefficient and refractive index α₂?=?1.10?×?10^?11?m?w^?1, n ₂?=??3.05?×?10^?19?m²?w^?1, respectively, and third-order NLO susceptibility χ⁽³⁾ 4.34?×?10^?13?esu.     

Synthesis,structures and magnetic properties of cyano- and amide-bridged FeIII-LnIII tetranuclear heterometallic clusters

Three Fe^III₂Ln^III₂ tetranuclear heterometallic clusters, [H₄LGd(H₂O)Tp*Fe(CN)₃]₂·8H₂O·2MeOH (1) and [H₄LLn(MeOH)Tp*Fe(CN)₃]₂·6MeOH·2MeCN (Ln?=?Tb and Dy for 2 and 3, respectively, H₆L = N,N′-(2,6-pyridine-dicarboxyl)-disalicylhydrazide, Tp* = hydridotris(3,5dimethylpyrazol-1-yl)-borate), were synthesized by use of the [(Tp*)Fe(CN)₃]^? unit as a metalloligand toward LnCl₃ and H₆L species. Structural analyses reveal that Fe^III and Ln^III ions in all complexes are connected to each other by one cyanide to form a heterobinuclear unit of [Ln(H₄L)][(Tp*)Fe(CN)₃], which is dimerized through Ln–N–C?=?O–Ln interaction. Magnetic susceptibility measurements show weak antiferromagnetic interactions between cyano-bridged Fe^III and Gd^III ions and amide-bridged Gd^III ions are operative. Complex 1 displays the magnetocaloric effect with ?ΔS_m^max = 12.70 J·kg^?1·K^?1 at 4.0 K for ΔH?=?7 T. No single-molecule magnetic properties are observed for 2 or 3 down to 1.8 K.     

Chemiluminescence of CdTe quantum dots using K3Fe(CN)6 as oxidant and its capping ligand-dependent effect

Water-soluble CdTe quantum dots (QDs) capped with three different thioalkyl acids (mercaptoacetic acid, cysteine and glutathione) were synthesized in aqueous solution. In basic media, K₃Fe(CN)₆ could directly oxidize the water-soluble CdTe QDs to produce strong CL emission. It was found that the CL intensity depended on the capping ligand and size of CdTe QDs. CL spectra and fluorescence spectra of the system were measured to investigate the CL reaction mechanism. Moreover, the effects of 17 metal ions on the CL system were carefully investigated. Ca²⁺, Co²⁺, Mn²⁺, Hg²⁺, Mg²⁺, Cu²⁺, Ni²⁺, Cr³⁺ and Fe³⁺ could markedly inhibit the CL signal of the K₃Fe(CN)₆–CdTe QDs system, which makes it applicable for the detection of such ions. This work is of importance for gaining a better understanding of the unique optical and physical chemistry properties of QDs, and it is also helpful to find more practical applications of QDs.     

Correlation of Mössbauer and Radiochemical Data on Hexacyanoferrate(III)

Mössbauer spectra of irradiated K₁Fe(CN)₆, observed 3 weeks after irradiation, showed that 3% of iron was converted to Fe(CN)₆^4?, while chemical analysis performed 100 hours after irradiation showed 18% was reduced to Fe(CN)₆^4?, Prussian blue was isolated in the chemical analysis, but not observed in the Mössbauer spectra. The Prussian blue formation was found to be time dependent.     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

A cyano-bridged hetero-tetranuclear [Sm2(o-phen)2(DMF)6(H2O)2(μ-CN)4Fe2(CN)8] · 5H2O · CH3OH: synthesis,structure, Mössbauer spectrum,and magnetism

Two new hetero-tetranuclear complexes, [Sm₂(o-phen)₂(DMF)₆(H₂O)₂(µ-CN)₄Fe₂(CN)₈]·;5H₂O·;CH₃OH (1) and [Sm₂(o-phen)₂(DMF)₆(H₂O)₂(µ-CN)₄Co₂(CN)₈]·;5H₂O (2), have been prepared from reaction of SmCl₃·;6H₂O, K₃[Fe(CN)₆]·;3H₂O or K₃[Co(CN)₆], and o-phen in methanol/DMF, and characterized. The structure of 1 consists of a cyano-bridged discrete cyclic tetranuclear complex in which the Sm(III) and Fe(III) centers are linked by four CN groups. Mössbauer spectrum of ⁵⁷Fe indicates that both Fe(III) atoms in 1 have the same low-spin (S?=?1/2) electronic ground state. From comparison of the magnetic data of 1 and 2, at low temperature for 1 indicates weak ferromagnetic coupling between Sm(III) and Fe(III).     

High-precision stopped-flow mixer for kinetic determinations

A highly automated, chemically inert, stopped-flow mixing system for rapid kinetic determinations is described. The reactant solutions are drawn into the drive syringes through novel double check valves, which are an integral part of the syringe block. The prime movers for the flow systems are pneumatic cylinders driven by compressed air; air flow is controlled by electromechanical valves actuated by optically isolated zero-crossing switches. The dead time of the flow system is 2–3 ms, depending on the drive pressure.The spectrophotometric detection system consists fo a high-intensity light source, a wavelength selector and a reference detector that are mechanically isolated from the flow system by a quartz fiber-optic light guide. The transducers are solid-state photodiodes. The sample photodiode is mounted adjacent to the output window of the cell to minimize light losses. The signal-to-noise ratio of the photometric system is from 2×10² to greater than 4×⁴, depending on wavelength, absorbance level, and amount of signal averaging.The reduction of Fe(CN)₆^3? by ascorbic acid was used as a test reaction. Accuracy and precision better than 0.3% were obtained for routine determination. A detection limit of 4.10×10^?7 M Fe(CN)₆^3?, or 134 μg kg^?1 K₃Fe(CN)₆, was found for this system.     

Improving the electrochemical performances of active carbon-based supercapacitors through the combination of introducing functional groups and using redox additive electrolyte

High-performance and low-cost electrochemical capacitors (ECs) are essential for large-scale applications in energy storage. In this work, the specific capacitance of active carbon (AC) electrode was significantly improved through the combination of introducing functional groups on the surface of AC and adding redox-active molecules (K₃Fe(CN)₆) into 2?M KOH aqueous electrolytes. The surface-oxygen functionalized AC (FAC) was synthesized using HNO₃ echoed as the electrode and 2?M KOH with 0.1?M K₃Fe(CN)₆ as the electrolyte. The surface functional groups of the AC not only contribute to the pseudocapacitance but also increase the active sites of the electrode/electrolyte interface, which enhances the electrochemical activity of the Fe(CN)₆^3?/Fe(CN)₆^4? redox pair, thus leading to high capacitance. In the redox electrolyte, the specific capacitance was much higher in 229.17?F?g^?1 (1?A?g^?1) achieved for those FAC than in raw AC (only 147.06?F?g^?1). Similarly, the FAC electrode suggested high energy density and extended cycling stability in the KOH?+?K₃Fe(CN)₆ electrolyte.     

Kalium-μ-dithio-bis(pentacyanokobaltat(III)) und Kalium-μ-diseleno-bis(pentacyanokobaltat(III))

Potassium-μ-dithio-bis(pentacyanocobaltate(III)) and Potassium-μ-diseleno-bis(pentacyanocobaltate(III)) The oxidation of [Co(CN)₅]^3? by sulfur or selenium leads to the complexes [Co₂S₂(CN)₁₀]^6? and [Co₂Se₂(CN)₁₀]^6?, respectively, which have been isolated as potassium salts K₆[Co₂S₂(CN)₁₀] · 4 H₂O and K₆[Co₂Se₂(CN)₁₀] · 5 H₂O. The μ-dithio complex has also been formed from [Co(CN)₅]^3? with polysulfide, from [CoOH(CN)₅]^3? with H₂S + O₂ and from [Co₂O₂(CN)₁₀]^6? with H₂S. As shown by their vibrational spectra the new complexes contain bridges Co? S? S? Co and Co? Se? Se? Co, respectively.     

Carbon dots-enhanced luminol chemiluminescence and its application to 2-methoxyestradiol determination

In this study, the fluorescent carbon dots (CDs) of good biocompatibility and low toxicity was prepared by a carbonation route, and a strong enhancement effect of CDs on the luminol-K₃Fe(CN)₆ chemiluminescence (CL) system was observed. 5?±?1?nm CDs were used as catalysts to enhance the reaction sensitivity. In the presence of 2-methoxyestradiol (2-ME), the CL intensity of CDs-luminol-K₃Fe(CN)₆ was significantly inhibited. The relative CL intensity was linearly related to the 2-ME concentration in the range of 1.0?×?10^?9 –1.0?×?10^?7?g?mL^-1 with a lower detection limit of 4.1?×?10^?10?g?mL^?1. As a preliminary application, the highly sensitive method was successfully applied to the determination of 2-ME in both pharmaceutical preparation and serum samples with satisfactory results. The possible mechanism of CL reaction catalyzed by CDs was investigated and the CDs played a role of catalyst in the reaction which could promote the generation of oxygen radicals.

It could be concluded that the enhancement effect on CL by CDs was attributed to the formation of oxygen radicals. The oxidation reaction of luminol was accelerated by oxygen radicals, which led to the enhanced CL emission.     

Rapid Method for Quantitative Determination of Proteolytic Activity with Cyclic Voltammetry

An alternative electrochemical method for the determination of proteolytic activity based on cyclic voltammetry of the electroactive probe ferricyanide (Fe(CN)₆^3?) on the gelatin film coated ITO electrodes was proposed. The gelatin film behaves as a kinetic barrier for Fe(CN)₆^3? and the proteolytic digestion of the gelatin film results an increase in the penetration of the Fe(CN)₆^3?. Thus, by the change of peak potential in cyclic voltammogram of Fe(CN)₆^3?, activity of the enzyme was determined.     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

Determination of Nicotinamide in Food and Human Fluid Samples by Capillary

A rapid and simple capillary electrophoresis (CE) coupled with chemiluminescence (CL) detection was proposed for analysis of nicotinamide. This method was based on the inhibitory effect of nicotinamide to CL reaction of luminol‐K₃Fe(CN)₆ in alkaline aqueous solution. Under the optimal conditions, nico‐tinamide can be assayed in the range of 0.01–10.0 μM with a limit of detection of 3.0 nM. The whole analysis process can be completed within 11 min. The relative standard deviations of the signal intensity and the migration time were 3.0% and 1.5% for a standard sample at 0.1 μM, respectively. The presented CE‐CL method was successfully applied to the determination of nicotinamide in yogurt, human urine and plasma samples.     

Electrochemical Responses and Sensitivities of Films Based on Multi-Walled Carbon Nanotubes in Aqueous Solutions

Novel films consisting of multi-walled carbon nanotubes (MWCNTs) were fabricated by means of chemical vapor deposition with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene as catalyst. The electrochemical responses of MWCNT-based films towards the ferrocyanide/ferricyanide, [Fe(CN)₆]^3?/4? redox couple were probed by means of cyclic voltammetry and electrochemical impedance spectroscopy at 25.0?±?0.5?°C. Both MWCNT-based films exhibit Nernstian response towards [Fe(CN)₆]^3?/4? with some slight kinetic differences. Namely, heterogeneous electron transfer rate constants lying in ranges of 2.69?×?10^?2?C1.7?×?10^?3 and 9.0?×?10^?3?C2.6?×?10^?3?cm·s^?1 were obtained at v?=?0.05?V·s^?1 for MWCNT_ACN and MWCNT_BZ, respectively. The detection limit of MWCNT_ACN, estimated to be about 4.70?×?10^?7?mol·L^?1 at v?=?0.05?V·s^?1, tends to become slightly poorer with the increase of the scan rate, namely at v?=?0.10?V·s^?1 the detection limit of 1.70?×?10^?6?mol·L^?1 was determined. Slightly poorer response ability was exhibited by MWCNT_BZ; specifically the detection limits of 1.57?×?10^?6 and 4.35?×?10^?6?mol·L^?1 were determined at v?=?0.05 and v?=?0.10?V·s^?1, respectively. The sensitivities of MWCNT_ACN and MWCNT_BZ towards [Fe(CN)₆]^3?/4? were determined as 1.60?×?10^?7 and 1.51?×?10^?7?A·L·mol^?1·cm^?2, respectively. The excellent electrochemical performance of MWCNT_ACN is attributed to the presence of incorporated nitrogen in the nanotube??s structure.     

A carbon quantum dots‐enhanced chemiluminescence method for the determination of gallic acid in food samples

In this work, we show that gallic acid can significantly inhibit the chemiluminescence (CL) intensity of carbon quantum dots (CQDs)‐enhanced K₃Fe(CN)₆–luminol system. Under optimum conditions, the decrease in the CL intensity is proportional to the concentration of gallic acid over the range 0.01–1.0 μM, and the detection limit is 1.0 nM. The relative standard deviation of repeated intraday and interday determinations of gallic acid was 1.2–4.2%. This method was successfully applied to the determination of gallic acid in food samples, with recoveries in the range 94.0–103.0%. A possible mechanism of CL is discussed.     

Sorption of [Fe(CN)6]3− and [Fe(CN)6]4− ions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels from aqueous solutions

The sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels at various pH values of hydrogel precipitation from solutions without a support electrolyte and from NaCl and Na₂SO₄ solutions with an ionic strength of 0.5 was studied. It was found that isotherms of sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions from solutions without a support electrolyte and from NaCl solutions and those of sorption of [Fe(CN)₆]^4? from Na₂SO₄ solutions are described by the Langmuir equation. It was established that the sulfate background suppresses the sorption of [Fe(CN)₆]^3? on Fe(III) and Zr(IV) oxyhydroxides. Both anions are sorbed only when the surface of the oxyhydroxides is charged positively; the Langmuir equation parameters A _max and K tend to decrease to the point of zero charge as the pH value of oxyhydroxide precipitation increases. An electrostatic mechanism of the sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions was suggested.     

Preparation of57Fe enriched K4[Fe(CN)6] and K3[Fe(CN)6]

A simple method to prepare⁵⁷Fe enriched K₄[Fe(CN)₆] and K₃[Fe(CN)₆] is described. The yields of the products are much better than those reported in the literature so far. The enrichment is essential for⁵⁷Fe Mössbauer investigation in a variety of Prussiate type complexes and other inorganic compounds which are conveniently prepared from K₄[Fe(CN)₆] and K₃[Fe(CN)₆]. K₄[Fe(CN)₆] was obtained by reacting freshly prepared Fe(OH)₃ with glacial acetic acid and treating with iron acetate in boiling aqueous solution of KCN. The novel feature of the procedure to obtain K₃[Fe(CN)₆] is that the oxidation of K₄[Fe(CN)₆] has been carried out in the solid state by passing chlorine gas over the powdered specimen. K₃[Fe(CN)₆] was crystallised from alkaline solution of this oxidised powder. The compounds were characterised by Mössbauer spectroscopy.     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

The silver(I)‐catalyzed exchange of coordinated cyanide in hexacyanoferrate(II) by phenylhydrazine in aqueous medium

The [Ag]⁺‐catalyzed exchange of coordinated cyanide in [Fe(CN)₆]^4? by phenylhydrazine (PhNHNH₂) has been studied spectrophotometrically at 488 nm by monitoring increase in the absorbance for the formation of cherry red colored complex [Fe(CN)₅PhNHNH₂]^3?. The other reaction conditions were pH 2.80±,0.02, temperature = 30.0 ± 0.1^°C, and ionic strength (I) = 0.02 M (KNO₃). The reaction was followed as a function of pH, ionic strength, temperature, [Fe(CN)^4?₆], [PhNHNH₂], [Ag⁺] by varying one variable at a time. The initial rates were evaluated for each variation using the plane mirror method. The initial rates evaluated as a function of [Fe(CN)^4?₆] clearly indicate that the initial rate increases with the increase in [Fe(CN)^4?₆] and finally reaches to a limiting value when [Fe(CN)^4?₆]/[AgNO₃] ? 1000. It indicates the formation of a strong adduct between [Fe(CN)₆]^4? and AgNO₃ prior to the abstraction of CN^?. The variation in initial rates with [PhNHNH₂] also showed limiting values at [Fe(CN)^4?₆]/[PhNHNH₂] ? 8.30. The complex behavior due to pH and [Ag⁺] variations on the rate has been explained in detail. The composition of the final reaction product [Fe(CN)₅PhNHNH₂] formed during the course of reaction has been found to be 1:1 using the mole ratio method. The evaluated values of activation parameters for the catalyzed reaction are E_a = 53.85 kJ mol^?1, Δ H^≠, = 51.33 kJ mol^?1, and Δ S^≠ = ?134.63 J K^?1 mol^?1, which suggest an interchange dissociative mechanism. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 447–456, 2007     

The kinetics and mechanism of oxidation of hexacyanoferrate(II) by periodate ion in highly alkaline aqueous medium

The oxidation of hexacyanoferrate(II) by periodate ion has been studied spectrophotometrically by registering an increase in absorbance at 420 nm (λ_max of yellow colored [Fe(CN)₆ ^3?] complex under pseudo first-order conditions by taking excess of [IO₄ ^?] over [Fe(CN)₆ ^4?]. The reaction conditions were: pH = 9.5 ± 0.02, I = 0.1 M (NaCl) and Temp. = 25 ± 0.1 °C. The reaction exhibited first-order dependence on each [IO₄ ^?] and [Fe(CN)₆ ^4?]. The effects of variations of pH, ionic strength and temperature were also studied. The experimental observations revealed that the periodate ion exists in its protonated forms viz. [H₂IO₆]^3? and [H₃IO₆]^2? while [Fe(CN)₆]^4? is present in its deprotonated form throughout the pH region selected for the present study. It has also been observed that deprotonated form of [Fe(CN)₆ ^4?] and protonated forms of periodate ion are the most reactive species towards oxidation of [Fe(CN)₆ ^4?]. The repetitive spectral scan is provided as an evidence to prove the conversion of [Fe(CN)₆ ^4?] to [Fe(CN)₆ ^3?] in the present reaction. The activation parameters have also been computed using the Eyring’s plot and found to be, ΔH? = 51.53 ± 0.06 kJ mol^?1, ΔS? = ?97.12 ± 1.57 J K^?1 mol^?1 and provided in support of a most plausible mechanistic scheme for the reaction under study.