An Organic Cation-Selective Electrode: Potentiometric Determination of Acetylcholine Activity

Abstract

The performance characteristics of the first ion-selective electrode specifically designed for the quantitation of an organic cation are described. The liquid membrane electrode exhibits rapid and near Nernstian response to acetylcholine ion activity from 10^?1 to 10^?5 M. High selectivity over Na⁺, K⁺ and NH₄ ⁺ is observed.     

Syntheses and Properties of New Pendant‐armed Calix[4]arene Derivatives as Cesium Selective Ionophore

Two new pendant‐armed calix[4]arene derivatives 5 and 6 have been synthesized. The study of alkali metal picrates extraction indicates that both compounds show preference of cesium cation, compound 6 in 1,3‐alternate conformation has better extractibility for Cs⁺ than compound 5. The coordination behavior of compound 6 with cesium cation was studied by ¹H NMR spectroscopy. The Cs⁺ selective electrode based on compound 6 exhibits a linear, near Nernstian response characteristics, the slope is 56.4 mV/decade in me concentration range of 10^?4—10^?1 mol/L, the selectivity coefficient (logK^pot_Cs.Na) is ?3.39.     

Construction of a New Perbromate-Selective Electrode. Kinetic Study of the Iron(II)- Perbromate Reaction and Microdetermination of Iron

Abstract

A perbromate- selective membrane electrode with a liquid membrane of crystal violet-perbromate dissolved in chlorobenzene is described, The liquid membrane electrode exhibits rapid and near Nernstian response to perbromate activity from 10^?5 to 10^?2 M. The response is unaffected by pH in the range 2–10, Major interferences are periodate and perchlorate. A kinetic study of the iron(II)- perbromate reaction was carried out with the perbromate electrode, A potentiometric method is described for the determination of 50–500 μg of iron (II) with relative errors and standard deviations of 1–2%.     

Cationic Surfactant Ion-Selective PVC Membrane Electrode Containing Macrocyclic Diimine Crown Ether

ABSTRACT

DP⁺ ion-selective PVC membrane electrode based on 2,3,11,12-dibenzo-5,9-diaza-4,9(10)-cis-diimino-1,13-dioxacyclopentadecane as a novel macrocyclic diimine crown ether is proposed. o-Nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl)borate as lipophilic salt were used. The electrode exhibits a Nernstian response for 1.0 x 10^?2-1.0 x 10^?6 mol 1^?1 DPCl with a slope of 58 mVdecade^?1. The detection limit is 2.5 x 10^?7 mol 1^?1. The electrode response was stable over a wide pH range (3-11). The lifetime of the electrode was about 2 months. The electrode shows a high selectivity towards inorganic cations. Among the organic cations tested, only hexadecyltrimethylammonium ion interferes. The electrode was suitable for determining the critical micelle concentration and as an end-point detector in the potentiometric titration of the cationic surfactants.     

Construction of a Triphenyltetrazolium Liquid Membrane Ion Selective Electrode and its Analytical Application to the Assay of Vitamin C

 The construction of a liquid triphenyltetrazolium cation (TT⁺) ion-selective electrode (ISE) based on [TT⁺]₃[P(W₃O₁₀)₄] salt dissolved in 2-nitrotoluene is described. The liquid membrane electrode exhibits a rapid and almost Nernstian response to triphenyltetrazolium cations in the concentration range from 2×10⁻⁴ to 1×10⁻² mol l⁻¹. The Nernstian slope is 56–58 mV decade⁻¹ which remains constant for at least two months. The response is virtually unaffected by pH changes in the range 3–12. Major interferents are periodate and malate. Deviation from linearity is also observed in the presence of bromide, iodide and thiocyanate, due to their precipitation with triphenyltetrazolium cations. Analytical applications such as direct potentiometry for the determination of TT⁺ in aqueous solutions and indirect potentiometry for the assay of ascorbic acid (vitamin C) in pharmaceutical preparations are described. Ascorbic acid in the range of 150–500 mg l⁻¹, under specified experimental conditions, can be determined with mean relative error of 1.9%. Received February 25, 2000. Revision April 4, 2000.     

Application of Nafion／Cobalt Hexacyanoferrate Chemically Modified Electrodes for the Determination of Electroinactive Cations by Ion Chromatography

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｏｎｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＩＣ)ｈａｓｂｅｅｎｒｅｃｏｇｎｉｚｅｄａｓａｕｓｅｆｕｌｍｅｔｈｏｄｆｏｒｔｈｅｓｅｐａｒａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｉｏｎｓａｎｄｃａｔｉｏｎｓｓｉｎｃｅｉｔｓｉｎｔｒｏｄｕｃｔｉｏｎｂｙＳｍａｌｌｅｔａｌ .ｉｎ 1975 .1ＡｓｉｇｎｉｆｉｃａｎｔｔｒｅｎｄｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆＩＣｍｅｔｈｏｄｉｓｓｅａｒｃｈｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｕｎｉｖｅｒｓａｌｄｅｔｅｃｔｉｏｎｍｅｔｈｏｄｓ .Ｔｈｅｍａｉｎｄｅｔ…     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Determination of Pseudoephedrine Hydrochloride in Some Pharmaceutical Drugs by Potentiometric Membrane Sensor Based on Pseudoephedrine–Phosphotungstate Ion Pair

Abstract

An ion-selective electrode (ISE) was developed for the rapid determination of pseudoephedrine hydrochloride (PSEHCl) in pharmaceutical preparations. The electrode incorporates a PVC membrane with a pseudoephedrine–phosphotungstate ion pair complex. The influences of membrane composition, temperature, pH of the test solution, and the interfering ions on the electrode performance were investigated. The sensor exhibits a Nernstian response for pseudoephedrine hydrochloride ions over a relatively wide concentration range (1.0 × 10^?1 to 1.0 × 10^?5 mol L^?1) with a slope of 56.2 ± 0.5 mV per decade at 25°C. It can be used in the pH range 4.0–10.5. The isothermal temperature coefficient of this electrode amounted to 0.0009 V/°C. The membrane sensor was successfully applied to determination of PSEHCl in its tablets and syrup.     

Poly(Vinyl Chloride) Containing Dibenzo-18-crown-6 as an Ion-Selective Membrane for Hyamine 1622

Abstract

A poly(vinyl chloride) membrane ion-selective electrode for the Hyamine 1622 cation is proposed. The active substance of the electrode was the neutral carrier dibenzo-18-crown-6 and di-iso-octylphthalate was used as plasticizer. The electrode had a Nernstian behaviour between 6.0 × 10^?6 and 1.6 × 10^?3 mol/dm³, a pH working range of 2 – 12 and high selectivity towards inorganic cations. Among the organic cations tested, only those having surfactant properties did interface. The electrode was suitable for determining the critical micelle concentration and as end-point detector in the potentiometric titration of the cationic surfactants.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Papaverine-Selective Plastic Membrane Electrode Based on Papaverinium Tetraphenylborate

Abstract

A plasticized PVC membrane containing the lipophilic salt papaverinium-tetraphenylborate was used to construct an ion-selective electrode for papaverine hydrochloride (Pv⁺Cl^?). The electrode shows near Nernstian response over the concentration range 1.6 × 10^?5 1.3C × 10^?2M PvCl in solutions of pH 1.0–6.2 at 25[ddot]C. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The electrode showed very good selectivity for Pv with respect to a large number of inorganic and organic cations. The potentiometric titration and standard addition methods were used to determine Pv in pure solutions and in pharmaceutical preparations.     

Liquid-membrane type 8-quinolinol-5-sulfonate ion selective electrode and its application to potentiometric titration

A nitrobenzene extract of the ion-pair consisting of 8-quinolinol-5-sulfonate (Hqs^?) and the cation of zephiramine (Z⁺Cl^?, benzyldimethyltetradecylammonium chloride) was used as an ion-exchanging liquid membrane for the electrode responding to Hqs^? ion. The potential response showed the Nernstian slope with the Hqs^? activities varying from 10^?2 to 10^?4.5 mol l^?1. The break points in the potential-pH plot with the constant analytical concentration of H₂qs correspond to the values of the negative logarithm of the acid dissociation constant of H₂qs. The present electrode was successfully applied to the potentiometric titration of copper(II) with H₂qs.     

Potentiometric Membrane Electrode for Cr(III) Ion Based on a New Aryl Amide Bifunctional Bridging Ligand as a Neutral Carrier

A novel Cr(III) ion‐selective electrode is constructed by incorporating a new aryl amide bifunctional bridging ligand, 2,2′‐bis{[(2″‐benzylaminoformyl)phenxoyl]methyl}‐diethylether (BBPMD) as a neutral carrier into the PVC matrix. The proposed electrode, with optimum membrane composition, exhibits an excellent near‐Nernstian response for Cr³⁺ ion ranging from 2.8 × 10^?6 to 1.0 × 10^?1 mol/L with a detection limit of 8.6 × 10^?7 mol/L and a slope of 19.5 ± 0.2 mV/dec in pH 3.0 nitrate buffer solution at 25 °C. It has an appropriate response time, suitable reproducibility, and good selectivity towards Cr³⁺ ion. The operational pH range of the proposed electrode is 2.5–6.5. The response mechanism was discussed in view of UV‐vis spectroscopy and the A. C. impedance technique. The excellent analytical features of the proposed electrode could lead to its successful application as an indicator electrode in potentiometric titration of Cr³⁺ ion and in the direct determination of Cr³⁺ ion in tea leaves and coffee samples.     

A Neutral Carrier Membrane Calcium-Sensitive Electrode with Wide Working pH Range

Abstract

A poly(vinyl chloride) (PVC) membrane calcium-sensitive electrode based on a new type of synthetic carrier 1,7-di[2-(1-phenylazo)naphtyl]-1,4,7-trioxaheptan is introduced. This electrode exhibited Nernstian response over the concentration range 1.0×10^?1 - 3.0×10^?8 mol/L Ca²⁺ with a slope of 28.8 mV/pCa in calcium ion buffer solutions. The detection limit for calcium ion was 1.0X10^?8 mol/L. The response time varied from 10 to 30 seconds. The working pH range for the electrode was 3.5 - 12.3 when the concentration of Ca²⁺ was 10^?3 mol/L. The lifetime of the electrode was proved to exceed 8 months. It was applied successfully in the determination of calcium ion in river water, mineral water and cosmetic. A method for the determination of total calcium in urine was developed.     

Magnesium Ion Selective Electrodes Based on β-Diketone Compounds

Abstract

The ion selectivities for poly(vinyl chloride) (PVC)-matrix membrane ion-selective electrodes based on seven lipophilic diketone compounds were examined. All the electrodes based on the tested five β-diketone cómpounds exhibited clear Mg²′-selectivity under high pH conditions (pH10). Especially, the electrode based on 2-acetyl-1-tetralone shows excellent Mg²⁺-selectivity, and the selectivity coefficients of the Mg²+ -electrode to Ca²+, K⁺ and K⁺ (log K^pot _{mg, ca} log K^pol _mg.k and log K^pot _Mg.Na) in pH 10 solution were ?2.2, ?1.9 and ?2.7, respectively. This elecrode gave a response slope of about 60 mV/pMg²⁺ ranging from 1 × 10^?2 to 2 × 10^?2, which corresponds to twice the usual Nernstian theoretical responce slope for the divalent cation. This phenomenon is advantageous for the acccurate determination of Mg²⁺.     

Self‐Assembled Mercapto‐Compound‐Gold‐Nanoparticle‐Modified Carbon Paste Electrode for Potentiometric Determination of Cadmium(II)

A new modified carbon paste electrode (CPE) based on a recently synthesized ligand [2‐mercapto‐5‐(3‐nitrophenyl)‐1,3,4‐thiadiazole] (MNT), self‐assembled to gold nanoparticles (GNP) as suitable carrier for Cd(II) ion with potentiometric method are described. The proposed electrode exhibits a Nernstian slope of 29.4±1.0 mV per decade for Cd(II) ion over a wide concentration range from 3.1×10^?8 to 3.1×10^?4 mol L^?1. The detection limit of electrode was 2.0×10^?8 mol L^?1 of cadmium ion. The potentiometric responses of electrode based on MNT is independent of the pH of test solution in the pH range 2.0–4.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. Finally, the proposed electrode was successfully employed to detect Cd(II) ion in hair and water samples.     

Efficient Synthesis of a New Podand and Application as a Suitable Carrier for Silver Ion‐Selective Electrode

A new podand of 1,1′‐thia‐bis‐[1‐(chloroethan‐2‐acetamid‐α‐oxy)] naphtol was synthesized and used as a suitable carrier for Ag⁺ PVC membrane electrode. The electrode exhibited linear response with a Nernstian slope of (59.5±0.8 mV/decade) within a wide concentration range of 1.0×10^?7 to 1.5×10^?2 mol L^?1 silver ions. The electrode had a fast response time of <10 s and detection limit of 8.6×10^?8 mol L^?1 with a working pH range from 3.7 to 9.0. The electrode was highly selective for Ag(I) ions over a large number of cations such as alkali, alkaline earth, and heavy metal ions. The proposed sensor has been applied as an indicator electrode for indirect determination of vitamin B₁ in tablets by determination of Cl^? ions in this compound with a standard solution of Ag(NO₃).     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Electroanalytical performance of Cd(II) selective sensor based on PVC membranes of 5,5′‐(5,5′‐(benzo[c][1,2,5]thiadiazole‐4,7‐diyl)bis(thiophene‐5,2‐diyl))bis(N1,N1,N3,N3‐tetraphenylbenzene‐1,3‐diamine)

The construction and performance characteristics of polymeric membrane electrodes based on neutral ionophore 5,5′‐(5,5′‐(benzo[c][1,2,5]thiadiazole‐4,7‐diyl)bis(thiophene‐5,2‐diyl))bis‐(N1,N1,N3,N3‐tetraphenylbenzene‐1,3‐diamine) (L) for quantification of cadmium ions, are described. Effect of plastisizers dibutylpthalate (DBP), tri‐n‐butylphosphate (TBP), dioctylpthalate (DOP), o‐nitrophenyloctyl ether (o‐NPOE), 1‐chloronaphthalene (CN) and ionic additives sodium tetraphenylborate (NaTPB), potassium tetrakis p‐(chlorophenyl)borate (KTpClPB) was studied. Best performance was obtained with the membrane having a composition L?:?PVC?:?DBP?:?NaTPB?≡?2?:?37?:?59?:?2 (w/w; mg). The membrane electrode exhibits Nernstian response in the concentration range 6.3?×?10^?8 to 1.0?×?10?^?1?mol?L^?1 with detection limit 3.6?×?10^?8?mol?L^?1 and is not affected by H⁺ ions over a wide pH range 3.0–10.0. The electrode possess a fast response time of 10?s and shelf life period of 3 months. The analytical utility of the proposed electrode has demonstrated by its application in the determination of cadmium in water, medicinal plants and soil samples. It could also be used successfully as an indicator electrode in the potentiometric titration of Cd²⁺ with EDTA (ethylenediaminetetraacetic acid).     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.