Analysis of bioaccessible concentration of trace elements in plant based edible materials by INAA and ICPMS methods

The total metal concentration and bioaccessible concentration of Cr, Mn, Fe, Cu, Zn, Se in Momordica charantia, Asparagus racemosus, Terminalia arjuna and Syzyzium cumini were measured by instrumental neutron activation analysis and by inductively coupled plasma mass spectrometry analysis (ICP-MS). The bioaccessible concentrations were determined in the gastrointestinal digest obtained after treating dried powdered samples sequentially in gastric and intestinal fluid of porcine origin at physiological conditions. The bioaccessible concentration of Fe was in the range of 58–67 mg kg^?1, Mn was 10.2–14.6 mg kg^?1, Cu was 3.7–4.8 mg kg^?1 and Zn was 10.6–18.4 mg kg^?1, were within the safety limits set for vegetable food stuff set by Joint FAO/WHO. The bioaccessibility of Zn, an essential element, was high (40–50 %) in M. charantia and in S. cumini. In addition, the total metal contents and bioaccessible concentration of Ni, Se, Cd and Pb in these samples were measured by ICP-MS. The total Cd content in S. cumini (2.6 ± 0.2 mg kg^?1) and its bioaccessible concentration (0.6 mg kg^?1) were strikingly high as compared to the other samples. Though total Hg contents were determined by ICP-MS, but their bioaccessible concentrations were below the detection limit (0.036 mg kg^?1).     

International comparison of the determination of the mass fraction of cadmium, chromium, mercury and lead in polypropylene: the Comité Consultatif pour la Quantité de Matière pilot study CCQM-P106

The CCQM-P106 pilot study was organized by the inorganic working group of the Comité Consultatif pour la Quantité de Matière (CCQM) as a feasibility comparison to study the applicability of different analysis methods to the polypropylene sample and test the abilities of the participants for measuring the Cd, Cr, Hg and Pb in polypropylene. National Institute of Metrology P.R. China (NIM) acted as the coordinating laboratory of this pilot study. There were 21 laboratories that submitted the final results. The median values of the mass fraction of Cd, Cr, Hg and Pb were 36.12 mg kg^?1 (the median absolute deviation about the median (MADe) = 0.46 mg kg^?1), 252.5 mg kg^?1 (MADe = 3.4 mg kg^?1), 387.0 mg kg^?1 (MADe = 10.1 mg kg^?1) and 466.2 mg kg^?1 (MADe = 8.9 mg kg^?1), respectively. Isotope dilution mass spectrometry (IDMS), inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-optical emission spectrometry (ICP-OES), atomic absorption spectrometry (AAS), instrumental neutron activation analysis (INAA) and X-ray fluorescence (XRF) measurement methods were used, and microwave digestion was used by the most of the participants. In general, very good agreement of the results was observed. Moreover, compared to the results of other methods, the results of IDMS still showed less spread amongst laboratories and had a smaller uncertainty. In addition, the results of some analytes used by XRF and INAA also got satisfactory agreement with the median value.     

Ethanolic extracts of Moringa oleifera Lam.

This paper reports the evaluation of the antioxidant potential of the ethanolic extracts of the leaves (EL), flowers (EF), seed pods (EP) and seeds (ES) from Moringa oleifera Lam. The antioxidant potential was assessed, upon the addition of the extracts to fish oil, by means of the total extractable phenol content (TEP), the DPPH^· free radical scavenging efficiency and using pressurized differential scanning calorimetry (P-DSC). The results of TEP and DPPH^· showed that the ES extract does not present a potential to be used as an antioxidant additive, and it was thus discarded from the remaining analyses. Thus, the following treatments were prepared: pure fish oil, fish oil with BHT (100 mg kg^?1), fish oil with TBHQ (100 mg kg^?1) and fish oil with EL, EF and EP—all at the concentration of 100 mg kg^?1, in relation to the total extractable phenolics contained in each one of the extracts. The leaf and flower extracts displayed a protecting effect, with an increase in about 20 and 11 % of the OIT values, respectively. However, such protection was smaller than that conferred by the synthetic antioxidants utilized. As for the thermal analysis results, it was noticed that EL presented the highest thermal stability among the extracts.     

DNA Damage and Effects on Antioxidative Enzymes in Earthworm (Eisenia fetida) Induced by Flumorph

Flumorph is an Oomycete fungicide, which is used extensively as an effective fungicide in vegetables and fruits, but little is known about its effect on nontarget soil organisms. In the present study, biochemical responses including changes in the activity of antioxidative enzymes catalase (CAT), superoxide dismutase (SOD), glutathione-S-transferase (GST), malondialdehyde (MDA), and DNA damage induced by flumorph were investigated in earthworms (Eisenis fetida). The CAT concentrations were stimulated at 5.0 mg kg^?1 over 28 days and inhibited at 10 and 20 mg kg^?1, except 10 mg kg^?1 on days 21 and 28 compared with the controls. The overall SOD activities were inhibited except 5 mg kg^?1 on day 28 and 10 mg kg^?1 on days 7 and 14. Meanwhile, the GST activities were stimulated on day 7 and decreased on the other days in summary. The MDA activities were increased notably at 5, 10, and 20 mg kg^?1 after 14 days. Clear dose-dependent DNA damage to Eisenia fetida was observed by olive tail moments in comet assay compared with controls. The results demonstrate that flumorph induces oxidative stress and DNA damage to earthworms, and the effects may be the important mechanisms of its toxicity.     

Transfer of Metals from Soil to Crops in an Area near a Coal Gangue Pile in the Guqiao Coal Mine,China

A field survey was conducted to investigate the metal contamination in coal gangue, soils, and crops (rice and soybeans), and to evaluate the possible health risks to the local population through food chain transfer near a coal gangue pile in the Guqiao Coal Mine, China. Contamination levels of zinc, lead, cadmium, and copper in coal gangue, soils, and crops were measured, and bio-accumulation factors from soil to crops were determined; the health risks were calculated accordingly. Results showed that both coal gangue and soil contained high levels of cadmium (0.15 mg kg^?1and 0.20 mg kg^?1) exceeding the background value of the soil. The lead soil concentration was low (9.99 mg kg^?1), but lead in rice (0.38 mg kg^?1) exceeded the maximal permissible limit of 0.2 mg kg^?1. For some tissues of crops studied, there was a significant correlation between the bio-accumulation factor values and the corresponding soil metal concentrations that were best described by a power equation. Oral intake of zinc, cadmium, and copper through crops posed no health risk to local residents, although hazard indices for rice (0.87–2.88) and soybeans (0.06–0.09) suggested that ingestion of rice grains was unsafe for human health. Therefore, rice was inappropriate to be planted in the soil surrounding this coal mine.     

Residue dynamics of chlorpyrifos and cypermethrin in/on pomegranate (Punica granatum L.) fruits and soil

Study on the residue dynamics of chlorpyrifos and cypermethrin in/on pomegranate (Punica granatum L.) and soil was carried out by conducting supervised field trials as per good agricultural practices. A modified QuEChERS was used to extract the insecticides in pomegranate peel and aril and soil. The limit of quantification (LOQ) of chlorpyrifos and cypermethrin were 0.01 and 0.05 mg kg^?1, respectively. Residues of the insecticides remained on the fruit surface and movement to the edible part (aril) was not observed. The residues after treatment on fruit peel were 2.46 and 3.51 mg kg^?1 and 2.84 and 4.54 mg kg^?1 for chlorpyrifos and cypermethrin, respectively, from recommended and double dose treatments. Chlorpyrifos residues degraded faster compared to cypermethrin. The pre-harvest intervals (PHIs) of chlorpyrifos were 22 and 35 days and those of cypermethrin 50 and 73 days, respectively, at recommended and double dose treatments. In the experimental field soil after the second application chlorpyrifos residues were 0.21 and 0.46 mg kg^?1 and cypermethrin residues 0.15 and 0.36 mg kg^?1. At harvest, both pesticides showed residues below the LOQ. Based on this study, application of cypermethrin towards harvest may be avoided whereas chlorpyrifos can be applied with 22 days PHI.     

Characterisation of phenolic compounds of the ethyl acetate fraction from Tabernaemontana catharinensis and its potential antidepressant-like effect

This study evaluates the antidepressant-like effect and analysed the qualitative and quantitative 74 phenolic standards of ethyl acetate fraction from Tabernaemontana catharinensis leaves. Acute administration of fraction in mice reduced the immobility time in forced swimming and tail suspension tests confirming its antidepressant-like activity. The anti-immobility effect elicited by this fraction was prevented by the pretreatment of mice with PCPA (100 mg kg^?1), ketanserin (5 mg kg^?1), SCH 23,390 (0.05 mg kg^?1) or yohimbine (1 mg kg^?1). A sub effective dose of the fraction produced a synergistic effect with fluoxetine (5 mg kg^?1). Chromatographic analysis identified 4-hydroxybenzoic and p-coumaric acids in the ethyl acetate fraction from T. catharinensis. Capillary electrophoresis presented 7.34 ± 0.02 mg g^?1 of p-coumaric acid concentration in the fraction. Therefore, it is possible that antidepressant-like effect elicited by ethyl acetate fraction from T. catharinensis be dependent on the p-coumaric acid.     

Evaluation of antioxidant activities of the edible and medicinal Acacia albida organs related to phenolic compounds

This study compared phenolic contents and antioxidant activity in different organs of Acacia albida (leaves and bark) and focuses on identification of phenolic compounds of leaves by HPLC-DAD. The analysed organs exhibited differences in total polyphenol contents (100 and 59.5 mg GAE g^? 1 DW). Phenolic contents of leaves were two times higher than those in bark. Ethanolic extracts exhibited good antioxidant activities with IC₅₀ = 26 μg mL^? 1 for DPPH and EC₅₀ = 50 μg mL^? 1 for FRAP. Identification by HPLC-DAD revealed the presence of nine phenolic compounds known for their high antioxidant activity. The results suggested that this species can be used as source of natural antioxidants.     

Persistence of trifloxystrobin and tebuconazole in banana tissues and soil under the semi-arid climatic conditions of Karnataka,India

Trifloxystrobin and tebuconazole are used for control of Sigatoka leaf spot disease of banana. This study was conducted to evaluate residue persistence of the fungicides in/on banana fruit, other edible parts and soil after spray application of the combination formulation, Nativo 75 WG, at the standard dose, 87.5 + 175 and double dose, 175 + 350 g a.i. ha^?1. The fungicides were extracted from banana and soil with acetone, partitioned into dichloromethane and cleaned-up using activated charcoal for trifloxystrobin and primary/secondary amine (PSA) for tebuconazole samples. The limit of quantification of the method was 0.05 mg kg^?1 for both fungicides. Initial residues of trifloxystrobin were 0.444 and 0.552 mg kg^?1 in/on banana with peel (whole fruit), which reached <0.05 and 0.065 mg kg^?1 after 30 days from treatment at the standard and double doses, respectively. Tebuconazole residues were 0.636 and 960 mg kg^?1 initially and reduced to 0.066 and 0.101 mg kg^?1 after 30 days. Trifloxystrobin and tebuconazole degraded with the half-life of about 11 days. Trifloxystrobin or its metabolite was not detected in the fruit pulp. Tebuconazole being systemic in nature moved to the fruit pulp which was highest on the 3rd day (0.103 and 0.147 mg kg^?1) and remained for 15 days. Matured banana fruit, flower, pseudostem and field soil were free from fungicide residues. For consumption of raw banana 43 days pre-harvest interval (PHI) is required after treatment of the combination formulation. Therefore application of the fungicides towards maturity stage of the fruits may be avoided.     

Dissipation rates of saisentong residues in fresh tobacco,tobacco powder and soil determined by high-performance liquid chromatography coupled with diode array detection

Two independent field trials were performed in Guizhou and Hunan, China in 2013 to investigate the dissipation and residue levels of saisentong in tobacco and soil. A novel and accurate method using high-performance liquid chromatography with diode array detection was developed and validated to determine saisentong levels in tobacco and soil. The average recovery of saisentong at fortification levels of 0.5, 2.5, 5.0 and 50.0 mg kg^?1 in fresh tobacco ranged from 75.92 to 107.40% with a relative standard deviation (RSD) of 0.94 to 7.55%, that at fortification levels of 0.5, 2.0 and 5.0 mg kg^?1 in tobacco powder ranged from 74.96 to 94.43% with a relative standard deviation (RSD) of 4.38 to 8.14%, and that at fortification levels of 0.1, 0.5 and 5.0 mg kg^?1 in soil ranged from 86.90 to 100.0% with an RSD of 1.38 to 4.62%. The limit of detection (LOD) of saisentong was 0.15 mg?kg^?1 in tobacco and 0.03 mg kg^?1 in soil, and the limit of quantification (LOQ) was 0.5 mg kg^?1 in tobacco and 0.1 mg kg^?1 in soil, respectively. For field experiments, the half-lives of saisentong in tobacco from Guizhou and Hunan were 5.9 and 1.6 days, respectively; those in soil were 14.7 and 12.0 days, respectively. The results suggest that the saisentong dissipation curves followed the first-order kinetic. The terminal residues of saisengtong in tobacco ranged from 0.5 to 9.39 mg kg^?1 at pre-harvest intervals (PHI) of 7, 14 and 21 days.     

Multielement Analysis of South Serbian Strawberry Cultivars by Inductively Coupled Plasma—Optical Emission Spectrometry

The contents of 17 elements in thirteen strawberry cultivars grown in the five districts of Southern Serbia were determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The most abundant elements are K (875–1148 mg?·?kg^?1 fresh weight), P (307–664 mg?·?kg^?1 fresh weight), Ca (192–256 mg?·?kg^?1 fresh weight), and Mg (111–189 mg?·?kg^?1 fresh weight) in all samples. Strawberries were also found to be a good source of Sr (8.05–18.6 mg?·?kg^?1 fresh weight) and Fe (3.09–10.4 mg?·?kg^?1 fresh weight). The contents of As and Cd were below the detection limit (0.0828 mg?·?kg^?1 and 0.0205 mg?·?kg^?1, respectively) in all strawberry samples, while the contents of Ni, Cr, and Cu were below the recommended tolerable levels proposed by Joint Food and Agriculture Organization of the United Nations and World Health Organization Expert Committee on Food Additives, and did not a pose a health risk for the consumer. The application of Duncan’s test showed significant differences between contents of analyzed elements in all strawberry cultivars. The highest mean levels of analyzed elements were detected in strawberries grown in the Topli?ki, Jablani?ki, and P?injski districts. The spike recovery test was used to verify the accuracy of the method, and the spike recovery was in the range 93.8–107.8%. The contents of the metals in strawberry samples were also comparable with values previously reported in the literature.     

Uncertainty Analysis of Chlormequat Residue in Fruits by LC�CMS�CMS

A method for determination of chlormequat (CCC) residue in fruits by liquid chromatography?Ctandem mass spectrometry (LC?CMS?CMS) was developed. Residue of CCC was extracted from samples with methanol?Cwater (v/v, 1:1) containing 1.0% acetic acid, cleaned up by strong cationic exchange (SCX) cartridge, and then determined by LC?CMS?CMS. The method showed good linearity over the concentration range 0.002?C5.0 mg kg^?1 with correlation coefficient above 0.997. The limit of detection (LOD) and limit of quantitation (LOQ) for CCC were 5 × 10^?4 mg kg^?1 (S/N = 3) and 0.002 mg kg^?1 (S/N = 10), respectively. Recoveries for CCC at three spiked levels (0.025, 0.050, and 0.20 mg kg^?1) were in the range 80?C102%. Estimation of measurement uncertainty was calculated for CCC at the level of 0.025 mg kg^?1 in fruits. The results demonstrated that the uncertainty of recovery was the main contribution to the combined standard uncertainty. The relative combined standard uncertainties associated with the method ranged from 11 to 13%, depending on the sample matrices.     

Concentration of arsenic in soil samples collected around the monazite processing facility, Thailand

Arsenic (As) in soil is a contaminant originated from human activities including pesticide use, mining and ore processing operations. In this work, As concentration in soil samples collected around the monazite processing facility, Pathum Thani, Thailand, was investigated. The collections of 24 soil samples were collected from the monazite processing area and 7 soil samples were collected from the control area without the processing activity of the same facility. Soils were digested with the mixture of HNO₃, HClO₄ and HF using a microwave digester. Inductively coupled plasma mass spectrometer (ICP-MS) equipped with an octopole reaction system (ORS) was used to determine the concentration of As in soils after the acid digestion. JB-3 (igneous rock) was the standard reference material used to check the accuracy of the method. It was found that the analytical results showed good agreement with the certified values. As concentration in soils collected from the monazite processing area ranged from 3.85 to 36.01 mg kg^?1 with the mean of 13.06 mg kg^?1. The concentration of As higher than the US EPA cancer soil screening level (22 mg kg^?1) was observed for only one sample. The control area showed As concentration varied from 9.59 to 14.19 mg kg^?1 with the mean of 11.97 mg kg^?1. The obtained results from this work were compared with the contaminated soil data of Amphoe Ron Phibun, Nakhon Si Thammarat, Thailand.     

Biodegradation of imidacloprid in sandy loam soil by Bacillus aerophilus

A study of the biodegradation of imidacloprid in soil was carried out under laboratory conditions. Sandy soil samples were fortified with imidacloprid at 50, 100 and 150 mg kg^?1 along with 45 x 10⁷ colony forming units (cfus) of Bacillus aerophilus and the samples were compared with unamended soil. The samples were extracted with acetonitrile, cleaned up by treatment with primary secondary amine sorbent and graphitised carbon black. The residues of imidacloprid and its metabolites were analysed by high performance liquid chromatography. The parent compound, imidacloprid, was found to be more persistent in both the treatments. Among metabolites, the highest values were obtained for urea and olefin while 5-hydroxy, 6-chloronicotinic acid (6-CNA), nitrosimine and nitroguanidine (NTG) were also observed in all the treatments in amended soil. In case of unamended (control) soil, 6-CNA was found to be the most persistent metabolite followed by olefin, urea, 5-hydroxy, nitrosimine and NTG metabolites. Total imidacloprid residues for control soil samples followed first-order kinetics at 50 and 150 mg kg^?1 but in case of control imidacloprid fortified at 100 mg kg^?1, the total residues of imidacloprid and its metabolites followed pseudo-first-order kinetics. The respective half-life value for 50 mg kg^?1 was 25.08 days and 30.10 days for both 100 and 150 mg kg^?1. However, total imidacloprid residues followed pseudo-first-order kinetics for its applications at 50, 100 and 150 mg kg^?1 in sandy loam soil amended with B. aerophilus. The half-life values for 50, 100 and 150 mg kg^?1 were worked out to be 14.33, 15.05 and 18.81 days, respectively. With the use of B. aerophilus, the reduction percentage of initial applied dose imidacloprid in sandy loam soil was found to be higher in all the three doses as compared to that of the control samples.     

Influence of Culture Medium Composition and Light Conditions on the Accumulation of Bioactive Compounds in Shoot Cultures of <Emphasis Type="Italic">Scutellaria lateriflora</Emphasis> L. (American Skullcap) Grown In Vitro

Methanolic extracts from in vitro grown Scutellaria lateriflora shoots cultured on five Murashige and Skoog (MS) medium variants supplemented with different combinations of 6-benzylaminopurine (BAP) and α-naphthaleneacetic acid (NAA) under different light conditions (monochromatic light, white light and no light) were analysed by HPLC for three groups of metabolites: flavonoids (26 compounds), phenolic acids and their precursors (19+2) and phenylethanoid glycosides (2). The analyses revealed the presence of baicalein, baicalin, wogonin, wogonoside, 3,4-dihydroxyphenylacetic acid and verbascoside. There was clear evidence of the influence of plant growth regulators and light conditions on the accumulation of the analysed groups of secondary metabolites. The amounts of the compounds changed within a wide range—for the total flavonoid content, 30.2-fold (max. 1204.3 mg·100 g^?1 dry weight (DW)); for 3,4-dihydroxyphenylacetic acid, 5.5-fold (max. 33.56 mg·100 g^?1 DW); and for verbascoside, 1.5-fold (169.15 max. mg·100 g^?1 DW). The best medium for the production of most of the compounds was the Murashige and Skoog variant with 1 mg l^?1 BAP and 1 mg l^?1 NAA. For verbascoside, the best ‘productive’ medium was the MS variant supplemented with 0.5 mg l^?1 BAP and 2 mg l^?1 NAA. The accumulation of the metabolites was stimulated to the greatest extent by blue light, under which the extracts were found to contain the highest total amount of flavonoids and the highest amounts of flavonoid glucuronides, baicalin and wogonoside, as well as of verbascoside. Their amounts were, respectively, 1.54-, 1.49-, 2.05- and 1.86-fold higher than under the control white light.     

Persistence and dissipation of fluopicolide and propamocarb on cabbage and soil under semi-arid climatic conditions

Persistence and dissipation of fluopicolide and propamocarb were studied on cabbage and soil as per good agricultural practices over a period of 2 years. A modified QuEChERS analytical method in conjunction with gas chromatography (GC) and GC–mass spectrometry was used for analysis of fluopicolide and its metabolite, 2,6-dichlorobenzamide, and propamocarb in cabbage and soil. The results of the method validation were satisfactory with recoveries within 74.5–100.81% and relative standard deviations 4.8–13.9% (n = 6). The limit of detection (LOD) and limit of quantification (LOQ) of both fluopicolide and 2,6-dichlorobenzamide were 0.003 µg mL^?1 and 0.01 mg kg^?1, respectively. The LOD and LOQ of propamocarb were 0.03 µg mL^?1 and 0.1 mg kg^?1, respectively. During 2013, the initial residue deposits of fluopicolide on cabbage were 0.60 and 1.48 mg kg^?1 from treatments at the standard and double doses of 100 and 200 g a.i. ha^?1 which dissipated with the half-life of 3.4 and 3.7 days. During 2014, the residues were 0.49 and 1.13 mg kg^?1 which dissipated with the half-life of 4.2 and 5.1 days. Propamocarb residues on cabbage were 5.36 and 12.58 mg kg^?1 in the first study (2013) and 4.85 and 10.26 mg kg^?1 in the second study (2014) from treatments at the standard and double doses of 1000 and 2000 g a.i. ha^?1, respectively. The residues dissipated with the half-life of 4–5.5 days. The preharvest interval, the time required for fluopicolide + propamocarb residues to dissipate below the maximum residue limits (notified by EU) at the standard dose, was 11.8 and 14 days during 2013 and 2014. Residue of 2,6-dichlorobenzamide was always <LOQ in cabbage. Residues of fluopicolide, 2,6-dichlorobenzamide and propamocarb were <LOQ in field soil at harvest.     

LC–MS Determination of Sterols in Olive Oil

Sterols in olive oils have been analyzed by liquid chromatography coupled to mass spectrometry with atmospheric-pressure chemical ionization in positive-ion mode. A simple procedure based on saponification and extraction of the compounds from olive oils was studied. Validation of the method included calibration and determination of recovery and repeatability was carried out. Good linearity was obtained up to 100 mg kg^?1 for all the sterols studied except β-sitosterol, for which linearity was obtained up to 2,000 mg kg^?1. Recovery ranged from 88 to 110%, detection limits from 0.9 to 3.1 mg kg^?1, and precision was good. The method has been successfully used for analysis of sterols in different types of oil. The predominant sterol was β-sitosterol; other minor components, for example sitostanol and cholesterol, were also detected. Total sterol content depended on the type of oil, and ranged from 687 to 2,479 mg kg^?1. Stigmasterol and the amount of erythrodiol plus uvaol can be used to distinguish between olive oil and seed oil.     

Determination of Urea in Milk by Liquid Chromatography-Isotope Dilution Mass Spectrometry

A definitive method based on liquid chromatography isotope dilution mass spectrometry (LC-IDMS) has been developed for the determination of milk urea, an indicator of nutrition status for the lactating animals. The milk samples were treated twice by sequentially adding acetonitrile and chloroform to precipitate proteins and then were directly separated using normal phase liquid chromatography without chemical derivatization. After the matrix separation, exact matching IDMS was used for the determination of milk urea, with high accuracy, high precision, good linearity and low uncertainty. The recoveries obtained for the four spiked milk samples were 100.6–102.2%. The linear range of signal responses was 10–2000 mg · kg^?1 with a linearity coefficient of 0.9995. The intraday and interday precisions in terms with relative standard deviations (RSDs) were 0.17–0.38% and 0.28–0.40%, respectively. The uncertainties of the whole sample analysis process were estimated to be 0.83%, 0.60%, and 0.64% for three samples with concentrations of 151.28, 184.36, and 266.66 mg · kg^?1.     

Removal of Lead (II) Ions by Poly(2‐octadecyl butanedioic acid): Isothermal and Kinetic Studies

Poly(2‐octadecyl‐butanedioic acid), prepared from polyanhydride PA‐18, possesses novel heavy metal adsorption characteristics. The adsorption capacity of this water insoluble polymer for lead (II) was substantially higher than other heterogeneous adsorbants and is equivalent to those obtained with homogeneous sorbants. The polymer exhibited pseudo‐second‐order kinetics and nearly complete adsorption of lead occurred in 15 min with initial lead (II) concentrations greater than 100 mg · L^?1. Adsorptive behavior was accurately predicted by the Dubinin‐Radushkevich isotherm model. The mean free energy of adsorption of lead (II) onto poly(2‐octadecyl‐butanedioic acid) was determined to be 31.6 kJ · mol^?1, suggesting an ion exchange component to the adsorption mechanism. Gibb's free energy values for this process indicate that it is spontaneous. Adsorption was relatively independent of pH in the range of 3–5, due to the utilization of the sodium carboxylate form of the chelating groups, and was not influenced by high Na⁺ concentration and moderate concentrations (up to 200 mg · L^?1) of Ca⁺². Lead (II) solutions containing 2000 mg · L^?1 Ca⁺² did reduce the adsorption of 2000 mg · L^?1 lead (II) by 28%.     

Sorption of Cd(II) onto carbon-based materials—a comparative study

The sorption behaviour of Cd(II) on three carbon-based materials including activated carbon (AC), carbon nanotubes (CNTs) and carbon-encapsulated magnetic nanoparticles (CEMNPs) which were prepared under similar conditions by nitric acid treatment were investigated. Generally, sorption of cadmium on these materials increased with the increase of pH. For AC and CNTs very similar results were obtained, while CEMNPs exhibits much higher affinity for Cd(II) despite of almost the same surface acidity. Thus, cadmium retention on tested sorbents was more dependent on the concentration of specific active sites than the total surface area available. The equilibrium sorption data were better fitted to Langmuir isotherm. The theoretical saturation capacity of the monolayer derived from this model at pH 8.0 for AC, CNTs and CEMNPs are 9.91 mg g^?1, 20.37 mg g^?1 and 91.0 mg g^?1, respectively. The kinetic of Cd(II) sorption is fitted for pseudo-second order equation and could be described as a combination of film diffusion and intra-particle diffusion, whereby the last one dominates. The experimental parameters for preconcentration of cadmium on a microcolumn packed with CEMNPs prior to its determination by flame atomic absorption spectrometry have been investigated. Cadmium can be quantitatively retained at pH 8 from sample volumes up to 150 mL and then eluted completely with 3 mL of 0.5 mol L^?1 HNO₃.