1,1′-Dimethylferrocene Mediated L-Glutamate Electrodes Modified With Electropolymerized 1,3-Diaminobenzene Film

Abstract

A mediated L-glutamate biosensor was constructed by incorporating 1,1′-dimethylferrocene in electropolymerized 1,3-diaminobenzene and immobilizing L-glutamate oxidase on the electropolymerized film. Stabilizers (1% DEAE-dextran, 1% MgCl₂ and 10% sucrose) were added to the immobilized enzyme to improve the long-term storage stability. The electrode responded linearly to L-glutamate concentration between 0.1 and 2.0 mM and the response of the electrode did not interfere with electroactive species and oxygen. The useful lifetime of the sensor was at least 3 weeks. When stored in dry form at 28°C, the sensor with stabilizers was stable at least 6 months. The electrode was applied to determine L-glutamate in fermentation broth samples. Good correlations were achieved between results obtained with the sensor and by enzymatic analysis using glutamate dehydrogenase.     

Enzyme Electrodes For L-Glutamate Using Chemical Redox Mediators and Enzymatic Substrate Amplification

Abstract

L-glutamate was determined by recycling in a bienzyme system consisting of glutamated dehydrogenase and glutamate pyruvate transaminase. The NADH produced in the dehydrogenase reaction was determined either by direct oxidation at a modified graphite electrode or by reoxidation with oxygen through a N-methylphenazinium ion mediator. The oxygen was determined with an oxygen electrode. The former system resulted in an amplification of 15 and the latter of 60 times.The detection limits became 5-10^?7 and 1-10^?7 M L-glutamate for the respective systems.     

Determination of Methimazole on a Multiwall Carbon Nanotube Titanium Dioxide Nanoparticle Paste Electrode

A multiwall carbon nanotube titanium dioxide nanoparticle modified carbon paste electrode was used for direct determination of methimazole. The nanoparticles in the carbon paste increased the surface area of the electrode and improved the sensitivity by enhancing the peak current. The electrochemical behavior of methimazole on the modified electrode was investigated. Experimental variables such as pH and electrode composition were optimized. At the optimum pH 7.0 (universal buffer), the modified electrode had a linear dynamic range of 0.5 to 100.0 μmol L^{? 1} (0.1–11.4 ppm) with a limit of detection of 0.17 μmol L^{? 1} . The application of the electrode for the determination of methimazole in pharmaceuticals and blood serum was investigated.     

A cobalt(II) phthalocyanine with indole substituents: formation,characterization and electrocatalytic studies

Herein, we report the formation of a new cobalt(II) phthalocyanine (CoPc) containing peripheral tetra-substituted indole (CoPc-ind, 2) moieties. The derivatized phthalonitrile, 4-(indole-4-oxy)phthalonitrile (1) as well its corresponding metal complex was characterized by NMR (for 1), IR– and UV–Vis spectroscopy as well as TOF mass spectrometry and elemental analysis (for 2). The electrochemical properties of the N₄-macrocyclic metal complex were investigated using cyclic- and square-wave voltammetry as well as corroborated by UV–Vis spectroelectrochemistry. The CoPc was electrodeposited onto the surface of a Pt working electrode followed by the immobilization of multiwalled carbon nanotubes (MWCNTs) onto the modified working electrode surface. The electrocatalytic activity of the resultant modified electrode toward dopamine revealed a lower ΔE value of 80?mV versus Ag|AgCl for the modified (2-MWCNTs) Pt electrode compared to the bare Pt electrode (ΔE?=?280?mV vs. Ag|AgCl). The diffusion- and convection-controlled electron-transfer kinetics of the chemically modified electrode were evaluated by chronoamperometry and rotating disk electrode techniques. Electrochemical impedance spectroscopic studies revealed that the 2-MWCNTs Pt electrode had a lower charge-transfer resistance and a higher apparent electron-transfer rate constant.     

Tetrathiaoxa Macrocycles with Dibenzo-subunits: A Search for New Tl(I)- and Ag(I)-Selective Ionophores

Novel S⁴O ⁿ mixed donor macrocycles (1, n=1; 2, n=2) were synthesized by the coupling reactions of corresponding dichlorides with dithiols under high dilution conditions. Synthesis and crystal structures of Tl⁺ and Ag⁺ complexes, [Tl(2)⁺ and Ag(2)⁺], with macrocycle 2 are described. The electrode based on macrocycle 2 showed excellent potentiometric sensing ability for Tl⁺ and Ag⁺ ions. This remarkable sensing of the proposed electrode can be understood in terms of the synergy effect of a soft–soft acid–base interaction and π-coordination, especially for the Tl⁺ ion, which was observed from the crystal structure of the corresponding complex.     

Construction of a New Perbromate-Selective Electrode. Kinetic Study of the Iron(II)- Perbromate Reaction and Microdetermination of Iron

Abstract

A perbromate- selective membrane electrode with a liquid membrane of crystal violet-perbromate dissolved in chlorobenzene is described, The liquid membrane electrode exhibits rapid and near Nernstian response to perbromate activity from 10^?5 to 10^?2 M. The response is unaffected by pH in the range 2–10, Major interferences are periodate and perchlorate. A kinetic study of the iron(II)- perbromate reaction was carried out with the perbromate electrode, A potentiometric method is described for the determination of 50–500 μg of iron (II) with relative errors and standard deviations of 1–2%.     

Amperometric L-glutamate sensor using a novel L-glutamate oxidase from Streptomyces platensis NTU 3304

Streptomyces platensis NTU 3304, isolated from soil samples, produces extracellular L-glutamate oxidase in liquid culture. Strains of this species have never been reported to be able to produce this enzyme. The purified enzyme was immobilized onto a cellulose triacetate membrane which was held at an oxygen electrode. The sensor was specific to L-glutamate in accordance with the properties of the novel L-glutamate oxidase. The time required for each assay in batch operation was less than 3 min. A linear relationship is observed between the decrease in dissolved oxygen and the concentration of L-glutamate between 20 and 140 mg l^?1 (ca. 0.12 and 0.84 mM). The sensor retained 95% of its original activity after 400 assays over a period of 3 weeks. The sensor was applied to determine the concentration of L-glutamate in broth samples during L-glutamic acid fermentation. Good correlations were achieved between results obtained with the sensor and by enzymatic analysis using glutamate dehydrogenase.     

Voltammetric Study and Detection of Methane on Nickel Hydroxide–Modified Nickel Electrode

Abstract

The nickel hydroxide–modified nickel (NMN) electrode was prepared by cyclic voltammetry. The modified electrode exhibited better catalytic effect toward electrochemical oxidation of methane in 1.0 mol · L^?1 NaOH solution. The catalytic activation of nickel hydroxide on the nickel electrode surface was investigated in different supporting electrolyte solutions by the cyclic voltammetry method in detail, and the related electrochemical oxidation of methane at the NMN electrode was first proposed by amperometric i‐t curve method under the experiment conditions. The results indicated that in the 1.0 mol · L^?1 NaOH solution, the anodic peak current increased with the increased concentration of methane.     

Plant tissue-based bioselective membrane electrode for glutamate

A novel potentiometric membrane electrode with selective response to L-glutamate over the 2 × 10^-4–1.3 × 10^-2 M concentration range is constructed by immobilizing slices of yellow squash tissue at a CO₂ gas sensor. This system represents the first successful use of intact plant materials as biocatalysts in the construction of bioselective potentiometric membrane electrodes; as a result, the range of future possibilities may be greatly extended. The glutamate-sensing electrode combines excellent selectivity characteristics over some 25 possible interferences tested, good reproducibility, and a useful lifetime of 7 days in aqueous samples.     

丝印电极法体外筛选黄嘌呤氧化酶抑制剂方法研究

建立丝印电极快速筛选黄嘌呤氧化酶(XO)抑制剂的新方法. 利用丝网印刷技术制作一次性使用的丝印碳糊电极, 采用吸附法将羧基化的多壁碳纳米管(MWNTs)修饰在电极表面, 建立测定尿酸(UA)的简单快捷的计时电流分析方法, 将该法应用于XO抑制剂的体外筛选. 在0.3 V (vs. Ag/AgCl)的工作电位下, UA在MWNTs修饰的丝印电极上产生灵敏的响应电流, 响应时间30 s, 测定UA的线性范围为2～300 μmol•L^－1, 线性方程为Y (μmol•L^－1)＝43.8240X (μA)－0.1592, r＝0.9998, 最低检出限为1 μmol•L^－1. 用该法对4种中药水提物进行了筛选, 相对空白对照组, 桑寄生500 μg•mL^－1浓度组有显著性差异. 该法简单、快速, 电极制作成本低, 所需仪器简单, 适用于体外大量筛选XO抑制剂.     

Bioelectrocatalysis of Dopamine Using Adsorbed Tyrosinase on Single-Walled Carbon Nanotubes

Abstract

A wealth of information on the reactions of redox-active sites in proteins can be obtained by voltammetric studies in which the protein sample is arranged as a layer on a suitable electrode surface. Here, we describe a method for the performance of a tyrosinase/single-walled carbon nanotubes/glassy carbon (Tyr/SWCNTs/GC) electrode, prepared by the modification of GC electrode surface by SWCNTs and adsorption of tyrosinase on the SWCNT surfaces. SWCNTs were studied with the help of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The dimensions of SWCNTs make them ideal candidates for the adsorption of proteins. The copper-containing enzyme, tyrosinase, exhibited an electrical contact with the electrode, because of the structural alignment of the enzyme on the SWCNT surfaces. The apparent Michaelis–Menten constant (K _m) for dopamine (DA) and the stability of the enzyme electrode were estimated. This method could be suitable for applications to nanofabricated devices.     

Differential Pulse Polarographic Determination of Moxifloxacin Hydrochloride in Pharmaceuticals and Biological Fluids

Abstract

A simple, fast, sensitive and fully validated differential pulse polarographic (DPP) method for the determination of trace amounts of moxifloxacin in pharmaceutics, serum and urine is reported. Moxifloxacin exhibited irreversible cathodic peak over the pH 5.00–11.00 in Britton–Robinson (B–R) buffer. At pH 10.00 (the analytical pH), a well‐defined peak at ?1.61 V versus saturated calomel electrode was obtained. The current has been characterized as being diffusion‐controlled process. The diffusion current constant (i_d) was 1.48±0.12 and the current–concentration plot was rectilinear over the range from 5×10^?7 to 1×10^?4 M with correlation coefficient (n=10) of 0.995.

The proposed method was applied to commercial tablets and average percentage recovery was in agreement with that obtained by spectrophotometric comparison method. The method was extended to the in vitro determination of moxifloxacin in spiked human serum and urine.     

Electrocatalytic reduction of molecular oxygen at electrodes coated with a new cobalt(II)–platinum(II) bimetallic porphyrin

Cobalt(II) inserts into 5-(4-pyridyl)-10,15,20-(3,4-dimethoxyphenyl)porphyrin (1) by reaction of the porphyrin with the cobalt(II) acetate salt in refluxing N,N′-dimethylformamide solutions. When the porphyrin and the cobalt porphyrin are reacted with PtCl₂(DMSO)₂ in dichloromethane at ambient temperatures the platinum complex coordinates to the peripheral pyridyl group of the porphyrin. Roughened EPG electrodes coated with the cobalt(II)–platinum(II) bimetallic porphyrin, complex (4), show a 500?mV shift in the reduction of molecular oxygen in acidic media when compared to the bare electrode. Oxidation of the bimetallic porphyrin coated electrodes at 1.20?V versus saturated calomel electrode (SCE) results in an additional shift of ca 100?mV for the reduction of molecular oxygen when compared to the bimetallic porphyrin coated electrode prior to oxidation. In addition the oxidized surface shows the ability to reduce approximately 50% of the oxygen to water and the other 50% to hydrogen peroxide according to rotating disk electrode measurements.     

Prototypical Nonelectrochemical Method for Surface Regeneration of an Integrated Electrode in a PDMS Microfluidic Chip

Abstract

A prototypical method for surface regeneration of an integrated electrode in a microfluidic chip is demonstrated. A platinum wire as working electrode was mounted in a polydimethylsiloxane chip vertical to the chip through the channel. The regeneration of the electrode was easily achieved by drawing the platinum wire out for 5 mm, because the area exposed to the channel or the stream would be altered. With continuous motion, the wire electrode can maintain a fresh surface just like a dropping mercury electrode. The current–time curve and open circuit potential (OCP) of dopamine solution show the performance of this prototypical system.     

An electrochemical sensor based on Pt nanoparticles decorated over-oxidized polypyrrole/reduced graphene oxide nanocomposite for simultaneous determination of two neurotransmitters dopamine and 5-Hydroxy tryptamine in the presence of ascorbic acid

Abstract

In this study, the Pt nanoparticles/over-oxidized polypyrrole nanofiber/reduced graphene oxide (Pt NPs/OPPy/RGO) nanocomposite was electrochemically synthesized and used to modify a glassy carbon electrode. To confirm the Surface morphology and characterization of the nanocomposite, field emission scanning microscopy (FE-SEM), X-ray diffraction (XRD), Raman, FT-IR, and X-ray photoelectron spectroscopy (XPS) were used. Simultaneous determination of these species showed one linear response 0.1–250.0?μM and two linear responses 0.5–10.0?μM and 10.0–470.0?μM, with detection limits 42?nM and 106?nM (S/N?=?3) for DA and 5-HT, respectively. Finally, the analytical application of this modified electrode was investigated in the human blood plasma.     

Lignans from the seeds of Chinese hawthorn (Crataegus pinnatifida var. major N.E.Br.) against β-amyloid aggregation

Phytochemical investigation on the seeds of hawthorn (Crataegus spp.) led to the isolation of a new compound, (7′R, 8′R, 8S)-isolariciresinol (1), along with six known compounds (2–7). The structures of all compounds were determined based on spectroscopic data interpretation. The Aβ_1–42 inhibition activity of all isolated compounds was evaluated in vitro. As a result, compounds 5 and 6 showed stronger inhibition of Aβ_1–42 aggregation than curcumin, with inhibition rates of 70.59 and 68.14% at 20 μM. The possible mechanism of interaction between Aβ_1–42 and the active compounds 5 and 6 was also investigated by molecular docking.     

Electrochemical Behavior and Application of Pirarubicin at Gold Nanoparticles–Modified Indium Tin Oxide Electrode

Abstract

A new type of gold nanoparticles–attached indium tin oxide electrode was made. By SEM and EDS, the as‐prepared gold nanoparticles–modified ITO electrode was characterized. This modified electrode has been used for the determination of pirarubicin (THP) in urine by cyclic voltammetry. Compared to a bare ITO electrode, the modified electrode exhibited a marked enhancement in the current response. Liner calibration curves are obtained in the range 5×10^?9mol/L～1.5×10^?6 mol/L with a detection limit of 1×10^?9 mol/L. The percentage of the recoveries ranged from 99.3% to 106.3%. The practical analytic utility of the method is illustrated by quantitative determination of THP in urine.     

The Potentiometric Titration of Soaps Using a Liquid Membrane Electrode

Abstract

A liquid membrane soap or surfactant sensitive electrode capable of working throughout the pH range 1–13 has been developed. The active substance of the electrode is the ion-association complex of dodecylbenzene sulphonate with bisdimethylglyoxime-o-phenanthroline-cobaltate(III). The electrode enables soap or surfactant titration depending on the pH.     

Papaverine-Selective Plastic Membrane Electrode Based on Papaverinium Tetraphenylborate

Abstract

A plasticized PVC membrane containing the lipophilic salt papaverinium-tetraphenylborate was used to construct an ion-selective electrode for papaverine hydrochloride (Pv⁺Cl^?). The electrode shows near Nernstian response over the concentration range 1.6 × 10^?5 1.3C × 10^?2M PvCl in solutions of pH 1.0–6.2 at 25[ddot]C. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The electrode showed very good selectivity for Pv with respect to a large number of inorganic and organic cations. The potentiometric titration and standard addition methods were used to determine Pv in pure solutions and in pharmaceutical preparations.     

Ionophore Based Bismuth Film Electrode for Lead

Abstract

A Nafion/ionophore, 4-tert-butylcalix[4]arene-tetrakis(N,N-dimethylthioacetamide) composite coated and bismuth film modified glassy carbon electrode. (GC/NA-IONO/BiFE) was described to determine trace lead sensitively and selectively. The characteristics of such modified GC/NA-IONO/BiFE were studied by scanning electron microscopy and cyclic voltammetry. The influence of various experimental parameters upon the stripping lead signal at the GC/NA-IONO/BiFE was explored. Under the optimized conditions, the differential pulse voltammetric stripping response is highly linear over the 0.1–8.0 nM lead range examined (180 s preconcentration at ?1.2 V), with a detection limit of 0.044 nM and good precision (RSD = 5.4% at 0.5 nM). Also applicability to seawater samples was demonstrated at such modified electrode. The high selectivity of ionophore coupled with the excellent electrochemical characteristics of bismuth endow the GC/NA-IONO/BiFE a promising and robust tool for monitoring of trace lead rapidly and precisely.