Study on a Fluorometric Method for the Determination of Protein in Serum Using Quercetin‐Lanthanum (III)‐Sodium Dodecyl Benzene Sulfonate‐Protein System

Abstract

It was found that the fluorescence intensity of lanthanum (III) (La³⁺)‐quercetin (Qu) complex is greatly enhanced by proteins in the presence of sodium dodecyl benzene sulfonate (SDBS). Based on this finding, a new fluorimetric method for the determination of proteins was developed. Under optimum conditions, the enhanced intensity of fluorescence is in proportion to the concentration of proteins in the range of 2.5×10^?8 to 1.0×10^?5 g/mL for bovine serum albumin (BSA), 5.0×10^?8 to 1.5×10^?5 g/mL for human serum albumin (HSA), and 1.0×10^?7 to 1.5×10^?5 g/mL for egg albumin (EA). Their detection limits (S/N=3) are 5.0×10^?9 g/mL, 7.0×10^?9 g/mL, and 2.1×10^?8 g/mL, respectively. The interaction mechanism was also studied.     

One‐Step Synthesis of β‐Cyclodextrin Functionalized Graphene/Ag Nanocomposite and Its Application in Sensitive Determination of 4‐Nitrophenol

β‐Cyclodextrin functionalized graphene/Ag nanocomposite (β‐CD/GN/Ag) was prepared via a one‐step microwave treatment of a mixture of graphene oxide and AgNO₃. β‐CD/GN/Ag was employed as an enhanced element for the sensitive determination of 4‐nitrophenol. A wide linear response to 4‐nitrophenol in the concentration ranges of 1.0×10^?8–1.0×10^?7 mol/L, and 1.0×10^?7–1.5×10^?3 mol/L was achieved, with a low detection limit of 8.9×10^?10 mol/L (S/N=3). The mechanism and the heterogeneous electron transfer kinetics of the 4‐nitrophenol reduction were discussed according to the rotating disk electrode experiments. Furthermore, the sensing platform has been applied to the determination of 4‐nitrophenol in real samples.     

Cholesterol oxidase biosensor based on a glassy carbon electrode modified with Nafion and methyl viologen

Cholesterol oxidase biosensor has been constructed by using bovine serum albumin and glutaraldehyde as cross linker to immobilize cholesterol oxidase and cholesterol esterase on a glassy carbon electrode modified with Nafion and methyl viologen. The biosensor has been used to determine total cholesterol in blood. The linear range of the determination is 2.5×10~7 to 1.0×10-4 mol/L. The detection limit is about 5.0×10~8 mol/L. The response time is 12 s. This biosensor has the advantage of high selectivity, sensitivity and short response time.     

Amperometric Determination of Inositol Based on Electrocatalytic Oxidation on a Glass Carbon Electrode Modified by Nickel Hexacyanoferrate Films

Abstract

A novel method to determinate inositol based on the electrocatalytic oxidation of inositol on the surface of a nickel hexacyanoferrate (NiHCF)–modified electrode was reported. The determination of inositol can be performed in the range of 1.0×10^?4 to 5.8×10^?3 mol/L with a detection limit of 5.0×10^?5 mol/L.     

Voltammetric Determination of L‐Dopa Using a Carbon Nanotubes‐Nafion Modified Glassy Carbon Electrode

Abstract

A method for determination of L‐dopa by the adsorption stripping voltammetry (ASV) using a multiwalled carbon nanotubes (MWNTs)–Nafion modified glassy carbon electrode (GMGCE) was proposed. This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed and the anodic peak potential is ca. 0.374V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of L‐dopa in samples. There is a good linear relationship between the peak current (i_p) and L‐dopa concentration in the range of 3.5×10^?7～1.5×10^?5 mol/L, with the limit of detection 5.0×10^?8 mol/L.     

One-step construction of an electrode modified with electrodeposited Au/SiO2 nanoparticles, and its application to the determination of NADH and ethanol

A new electrode was developed by one-step potentiostatic electrodeposition (at ?2.0 V for 20 s) of Au/SiO₂ nanoparticles on a glassy carbon electrode. The resulting electrode (nano-Au/SiO₂/GCE) was characterized by scanning electronic microscopy, X-ray photoelectron spectroscopy and electrochemical techniques. The electrochemical behavior of dihydronicotinamide adenine dinucleotide (NADH) at the nano-Au/SiO₂/GCE were thoroughly investigated. Compared to the unmodified electrode, the overpotential decreased by about 300 mV, and the current response significantly increased. These changes indicated that the modified electrode showed excellent catalytic activity in the oxidation of NADH. A linear relationship was obtained in the NADH concentration range from 1.0?×?10^?6 to 1.0?×?10^?4 mol?L^?1. In addition, amperometric sensing of ethanol at the nano-Au/SiO₂/GCE in combination with alcohol dehydrogenase and nicotinamide adenine dinucleotide was successfully demonstrated. A wide linear response was also found for ethanol in the range from 5.0?×?10^?5 to 1.0?×?10^?3 mol?L^?1 and 1.0?×?10^?3 to 1.0?×?10^?2 mol?L^?1, respectively. The method was successfully applied to determine ethanol in beer and biological samples.     

Simultaneous Determination of Epinephrine, Noradrenaline and Dopamine in Human Serum Samples by High Performance Liquid Chromatography with Chemiluminescence Detection

A simple, rapid and accurate high performance liquid chromatographic （HPLC） technique coupled with chemiluminescence （CL） detection was developed for the simultaneous determination of epinephrine （E）, noradrenaline （NA） and dopamine （DA）. It was based on the analyte enhancement effect on the CL reaction between luminol and potassium ferricyanide. The effects of various parameters, such as potassium ferricyanide concentration, luminol concentration, pH value and component of the mobile phase on chromatographic behaviors of the analytes （E, NA and DA） were investigated. The separation was carded out on C18 column using the mobile phase of 0.01 mol/L potassium hydrogen phthalate solution and methanol （92 ： 8, V/V）. Under the optimum condi- tions, E, NA and DA showed good linear relationships in the range of 1 × 10^-8 -5 × 10^-6, 5.0× 10^-9 -1.0× 10^-6 and 5.0×10^-9-1.0× 10^-6 g]mL respectively. The detection limits for E, NA and DA were 4.0×10^-9, 1.0× 10^-9 and 8.0 × 10^-10 g/mL. The proposed method has been applied successfully to the analysis of E, NA and DA in human serum samples.     

Determination of Genistein by Flow‐injection Chemiluminescence Method Based on Ferricyanide Oxidation Sensitized by Rhodamine 6G

A novel flow injection chemiluminescence (FI‐CL) method for the determination of genistein was described. The method was based on the reaction between genistein and potassium ferricyanide in alkaline solution to give weak CL signal, which was dramatically enhanced by rhodamine 6G (Rh G). The CL emission allowed quantitation of genistein concentration in the range 1.0 × 10^?7–4.0 × 10^?5 mol/L with a detection limit (3σ) of 4.2 × 10^?8 mol/L. The relative standard deviation for 11 parallel measurements of 5.0 × 10^?7 mol/L, 4.0 × 10^?6 mol/L and 1.0 × 10^?5 mol/L genistein were 2.59%, 2.40% and 1.48%, respectively. The experimental conditions for the CL reaction were optimized and the possible reaction mechanism was discussed. The method was applied to the determination of genistein in biological fluids.     

Flow-Injection Chemiluminescent Determination of Piroxicam Using Tris (2,2′-bipyridyl) Ruthenium(II)—Potassium Permanganate System

Abstract

A rapid and sensitive chemiluminescence method using flow-injection has been developed for the determination of an analgesic agent drug, piroxicam. The method is based on the chemiluminescence reaction of piroxicam with an acidic potassium permanganate and Ru(bipy)₃ ²⁺. The chemiluminescence intensity is greatly enhanced when quinine sulfate is used as a sensitizer. After optimization of the different experimental parameters, a calibration graph was obtained over a concentration range of 3.0 × 0^?8–3.0 × 0^?5 mol L^?1 with the detection limit of 1.0 × 0^?8 mol L^?1. The relative standard deviation is 1.5% (n = 11) for the determination of 8.0 × 10^?7 mol L^?1 piroxicam. The proposed method was successfully applied to commercial tablets, spiked serum, and urine samples.     

Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.     

Determination of L‐Vesamicol in Serum Samples Using Enantioselective,Potentiometric Membrane Electrodes Based on Antibiotics

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on antibiotics are proposed for the enantioanalysis of L‐vesamicol. A carbon paste was modified with antibiotics (vancomycin, teicoplanin, and teicoplanin modified with acetonitrile), as chiral selectors. The EPMEs based on antibiotics were reliably used for enantiopurity tests of L‐vesamicol using the direct potentiometric technique. The following linear concentration ranges: 1.0×10^?6–1.0×10^?4, 1.0×10^?6–1×10^?3 and 1×10^?7?1×10^?2 mol/L; and detection limits: 1.1×10^?7, 9.6×10^?8, and 3.6×10^?8 mol/L were determine for vancomycin, teicoplanin, and teicoplanin modified with acetonitrile–based EPMEs, respectively. The proposed EPMEs were applied for the enantioanalysis of L‐vesamicol in urine samples.     

Electrochemical Enzyme‐Linked Immunoassay for the Determination of Estriol Using Methyl Red as Substrate

Abstract

A new electrochemical substrate for horseradish peroxidase, methyl red, is reported. In this reaction system, horseradish peroxidase can catalyze the redox reaction of methyl red and H₂O₂. Methyl red exhibits a sensitive voltammetric peak at?0.51 V vs. Ag/AgCl reference electrode, the decrease of the peak current of methyl red is in proportion to the concentration of horseradish peroxidase (HRP). The linear range for determination of horseradish peroxidase is 5.0×10^?8～5.0×10^?7 g mL^?1 and the detection limit is 1.8×10^?8 g mL^?1. The relative standard deviation is 3.3% when 2.0×10^?7 g mL^?1 HRP was sequentially determined 11 times. A voltammetric enzyme‐linked immunoassay method for the determination of estriol was developed, based on this electrochemical system. The linear range for determination of estriol is 1.0～1000.0 ng mL^?1, and the detection limit is 0.33 ng mL^?1. The relative standard deviation for 11 parallel determinations with 200 ng mL^?1 estriol is 4.8%. Some pregnancy serum samples were analyzed with satisfactory results.     

Adsorptive Voltammetric Measurement of Trace Level of Iron(III) with 4–(2–Pyridylazo) Resorcin

Abstract

The polarographic behavior of the complex of iron–4– (2–pyridylazo) resorcin(PAR) was studied. In HAc– NaAc– EDTA buffer solution, the complex can be adsorped on a hanging mercury drop electrode giving a sensitive adsorptive complex reduction peak with a peak potential at -0.36V(vs. SCE). Optimum experimental conditions were found by the use of 0.08mol/L HAc, 0.06mol/L NaAc, 5.0 × 10^?3mol/L EDTA and 1.0 × 10^?5mol/L PAR. With preconcentration for 60s, the derivative peak height of the complex compound is linearly proportional to the concentration for Fe in the range from 1.0 × 10^?9mol/L to 1.0 × 10^?7mol/L. For a 2–min pre–concentration time, the detection limit found was 2.0 × 10^?10mol/L. This method has high sensitivity and selectivity. It has been applied to the determination of trace iron in food and water samples without any pre–separation step.     

Direct chemiluminescence determination of fenbufen by the enhancement of the {\text{Ru}}\left( {{\text{phen}}} \right)_3^{2 + } –cerium(IV) system

A method is described for determination of fenbufen that is based on the chemiluminescence (CL) reaction of the ${\text{Ru}}\left( {{\text{phen}}} \right)_3^{2 + } $ –cerium(IV)–fenbufen system. An enhanced CL reaction was developed, and optimum conditions for CL were investigated. The CL was linearly dependent on fenbufen concentration in the range 4.0?×?10^?8–9.0?×?10^?6 mol L^?1. The detection limit was 2.0?×?10^?8 mol L^?1. The relative standard deviation (RSD) was 2.8% for eleven measurements of 6.0?×?10^?7 mol L^?1 fenbufen standard solution. The new method enables simple, sensitive, and rapid determination of fenbufen and has been used for determination of fenbufen in pharmaceutical preparations in capsule, spiked serum and urine samples.     

ClO3--SO32--Rh6G-SDBS体系的化学发光及其用于亚硫酸根测定

Based on the micelle synergism mechanism, a chemiluminescence （CL） flow system for the determination of sulfite was described. The CL signal generated from the reaction of chlorate with sulfite in acidic solution was very weak, while the interfusion of sodium dodecylbenzenesulfonate （SDBS） resulted in a highly chemiluminescent intensity. The major goal of this work was to investigate and develop the SDBS rnicelle synergetic CL system. The mechanism was proposed and proved by spectrometry. The results indicated that the unique structure of SDBS micelles prorooted the aggregation of rhodamine 6G （Rh6G） and a much easier energy transfer, leading to a marked shift to red in the CL emission. This CL system was developed for the determination of sulfite and the concentration of sulfite was proportional to the CL intensity in the range of 5.0× 10^-8--1.0× 10^-5 mol/L with the detection limit of 1.7×10^-8 mol/L （S/N=3）. The relative standard deviation was 3.3% for 1.0×10^ 6 mol/L sulfite solution with eleven repeated measurements. This method was successfully applied to the determination of sulfite in powder sugar.     

Determination of Gallic Acid by Flow Injection with Electrochemiluminescent Detection

ABSTRACT

Potential dependent inhibition and enhancement effects of gallic acid on the electrochemiluminescence (ECL) of luminol in alkaline solutions were found. On the basis of the enhancement effect, a flow injection method was developed for the determination of gallic acid. The method was simple, convenient and sensitive. A detection limit of 1.8×10^?8 mol/L, linear range of 3.0×10^?8 - 1.0×10^?4 mol/L, relative standard deviation of 1.0% for eleven measurements of 5.0×10^?6 mol/L of gallic acid was found. This method was successfully applied to determine the content of gallic acid in Chinese gall (moshizi).     

The study of synergistic effects of ZnO decorated graphene nanosheets and room temperature ionic liquid for analysis of raloxifene in pharmaceutical samples

Raloxifene is an important estrogen receptor modulator with many side effects, and determination of this drug is very important in biological samples. The present research describes a ZnO decorated graphene nanosheet (ZnO/GrNS)/ionic liquid based electrochemical sensor for the measurement of raloxifene. The ZnO/GrNS were synthesized via direct chemical precipitation process and characterized using the SEM-EDAX technique. Due to excellent conductivity of ZnO/GrNS and ionic liquid, the suggested electrochemical sensor exhibited improved electrochemical response for raloxifene. After optimization of electrochemical conditions and at the best state, the fabricated electrode displayed two linear dynamic ranges (1.0?×?10^?10–5.0?×?10^?6 and 1.0?×?10^?6–5.0?×?10^?4 M) with a detection limit (DL) of 0.07 nM. Quantification analysis of raloxifene was successfully evaluated using the suggested sensor in pharmaceutical samples.     

Clopyralid detection by using a molecularly imprinted electrochemical luminescence sensor based on the “gate-controlled” effect

A new strategy for trace analysis was proposed by preparing a molecularly imprinted polymer (MIP) sensor. The template molecules of clopyralid were determined based on “gate-controlled” electrochemiluminescence (ECL) measurement. A dense polymer film was electropolymerized on an electrode surface to fabricate the MIP–ECL sensor. The process of template elution and rebinding acted as a gate to control the flux of probes, which pass through the cavities and react on the electrode surface. ECL measurement was conducted in the luminol–H₂O₂ system. A linear relationship between ECL intensity and clopyralid concentrations in the range of 1?×?10^?9 mol/L to 8?×?10^?7 mol/L exists, and the detection limit was 3.7?×?10^?10 mol/L. The prepared sensor was used to detect clopyralid in vegetables. Recoveries of 97.9 % to 102.9 % were obtained. The sensor showed highly selective recognition, high sensitivity, good stability, and reproducibility for clopyralid detection.     

Determination of Hemin using a Parallel Catalytic Reduction Wave of its Protoporphyrin IX Ring

Abstract

Hemin, iron (III) protoporphyrin IX chloride, in NH₃‐NH₄Cl buffer solution of pH 9.5 produces an insensitive reduction wave at about ?0.70 V (vs. saturated calomel reference electrode, SCE) by using single sweep polarography. Adding oxidant K₂S₂O₈ to the solution, hemin reduction wave is catalyzed, yielding a parallel catalytic wave. The catalytic current is 20 times of hemin original reduction current. The derivative peak height is linearly proportional to the hemin concentration in the range of 7.5×10^?8 to 4.5×10^?6 mol/l, the detection limit is 5.0×10^?8 mol/l. Serum albumin, common amino acids, and metal ions have no interference with the hemin determination. The proposed method has been applied to the determination of hemin content in oral liquid samples with satisfactory results. The parallel catalytic wave is attributed to the catalytic reduction of porphyrin ring of hemin at the dropping mercury electrode. The new method could be useful in biochemical, clinical, and pharmaceutical analysis.     

The electrochemistry of uric acid at a gold electrode modified with L-cysteine, and its application to sensing uric urine

The electrochemistry of uric acid at a gold electrode modified with a self-assembled film of L-cysteine was studied by cyclic voltammetry and differential pulse voltammetry. Compared to the bare gold electrode, uric acid showed better electrochemical response in that the anodic peak current is stronger and the peak potential is negatively shifted by about 100 mV. The effects of experimental conditions on the oxidation of uric acid were tested and a calibration plot was established. The differential pulse response to uric acid is linear in the concentration range from 1.0?×?10^?6 to ~?1.0?×?10^?4 mol?L^?1 (r?=?0.9995) and from 1.0?×?10^?4 to ~?5.0?×?10^?4 mol?L^?1 (r?=?0.9990), the detection limit being 1.0?×?10^?7 mol?L^?1 (at S/N?=?3). The high sensitivity and good selectivity of the electrode was demonstrated by its practical application to the determination of uric acid in urine samples.